how to hard test the p3600 - P3600 General

i upgrat my phone p3600 use the hk ver wm6 when i upgate thell me the version is not right then my phone is stay at 3 colour . how to hard reset
now download asis en version wm6 also disp DQU3-TSKQ556-CLVBC:68-TSKQ556 error
anyone have the p3600 wm6 rom ?
I SEE THE WIKI AND CAN'T HARD RESET
HELP ME
MY PPC HOLD AT 3 COLOUR

Read the manuel
Hello
You have to puch three botons, those are the two screen botons and the soft reset.
soft reset is on the botom
the two screen botons are above the pick up and hang up botons
Then all at onse puch them

@jaaphooi. I think he means that he has flashed a rom without CID unlocking first, and is now stuck in bootloader. In which case a hard reset will not do anything.
if so
@ldlian. you will need to get the original rom which matches the original branding of the phone. then read the stickies in the upgrading trinity forum.

Related

my k-jam hangs

Hi,
Recently my pda(k-jam) fell from my pocket and it hanged. I did a soft reset but I get this error message "Press Send to restore factory defaults, Other keys to quit"
I tried all keys but in vain. I then did a hard reset by pressing the comm and the voice dial. (did a reset with my stylus). I still get the above error message.
Does anyone have any suggestion or idea how to reset my pda?
Thanks alot.....
Y dnt u flash it with a new Rom look around the forum for the new MOSKI ROM.
Thanks
Thank you for your suggestion, I will think of upgrading to molski.
But will it upgrade ? As a hard reset also doesnt seem to work and how do I get to reach the ROM if I am not able to see the other things?
Thanks
Please help...
Hi ,
I am a newbie and so would seek alot of help. Thanks in advance...
Couple of days back my pda fell and now after soft or hard reset the screen still shows this "press send to restore to factory defaults, other keys to quit"
I would like to upgrade to molski but they say I might have to downgrade my rom but I must first unlock the device. There are g3 or g4 device..how do I know what device my k-jam is...g3 or g4? How do I follow up or know?
Could anybody give me the link or solve my problem? As my k-jam just wont pass that screen..I tried looking into various topics but couldnt go about the first step I should be taking...
Please help!
Thanks
Hi,
Please help..after hard reset, it still does not happen to load into the factory defaults... I cant flash my ROM or anything ...as it wont progress further than that screen ... "Press Send to load factory defaults, or quit"
Anyone have any suggestion?
Hold down the camera button while resetting it. If you can get it to the bootloader (three color screen), you might be able to flash it with something and possibly rescue it. It does, however, sound like you might be screwed. Things break when you drop them, including plastic phones.
hi
Thanks but if I have to do a hard reset, I would already be holding the comm manager and the voice dial with the stylus to reset. Do I hold all the 3 buttons together while hard resetting ?
I have tried all the buttons after doing the hard reset but just doesnt get to the other screen.
Thanks for your help.
Hold down the camera button, Power Button and Pin in the hole. First relese the hole, then release the power button and keep holding the Camera button dis will bring the Tri-colour screen. There'll be some info. like IPL n SPL der
If IPL n SPL are like:
IPL 2.xx.xxxx or 1.xx.xxxx
SPL 2.xx.xxx or 1.xx.xxxx then ur device is G4.
if its like:
IPL 2.xx or 1.xx
SPL 2.xx or 1.xx then ur device is G3
if its G4 you need to CID Unlock that before upgrading it.
All the LUCK. Go Ahead.
Hi
Thanks,
I tried your steps but it still wouldnt work. But somehow I did the switch below the comm button and it showed me the screen to the somethign HTC innovation or like that.
I think I had to tinker with the switch below the button to get the screen working.Thanks for your help.

Bootloader mode

hi
please how can i do bootloader mode i have an herald bloqued in spl ipl cause try to flash with awizard
now in downloaded some rom and can't flash it cause no connection
please how can i do bootloader mode
thanks
there is no more information in Wiki only this one - http://wiki.xda-developers.com/index.php?pagename=Herald_BootLoaderPassword
i did it
bootloader = holdon camera button and reset with stylus
hard reset HTC 4350
Hi guys,
I've tried all your crazy combinations of hard reset my HTC 4350 [aka Herald] and none really did anything! [beside the provided app.]
Can anyone of you enlighten me:
1. do i need to unlock my rom or smth??
2. can i get read of the original green theme stored in ROM after unlocking my CID?
10x a lot in advance,
C. Marius
c_marius said:
Hi guys,
I've tried all your crazy combinations of hard reset my HTC 4350 [aka Herald] and none really did anything! [beside the provided app.]
Can anyone of you enlighten me:
1. do i need to unlock my rom or smth??
2. can i get read of the original green theme stored in ROM after unlocking my CID?
10x a lot in advance,
C. Marius
Click to expand...
Click to collapse
Hold the 2 soft keys down while resetting the device... hold them down until a white message on dark screen appears.
Ciao.
help me please im nearly cryin' i tried to flash my herald to wm6 now i got i white screen and its there after Hard reset
Take your time to read around in the threads of the Herald forum. Your device could be bricked (probably.. srry)

mda compact

hello
please help i have a mda compact a cannot get the phone to wrk any more no service.
rom flashed
hard reset
does not go into factory reset (2 side buttons plus reset holding on to 2 side buttons) please advice this site is awsome
mda compact is a "magician", you may already bricked your phone by flashing a 'wizard' ROM into it.
it is not bricked. it does search and then stops
Hardreset it
Start -> Settings -> System -> Clear Storage
heelp
my friend there is no such route . yes the wizard format is like that,i have hard reset it (when it ons annd goes to the auto custamisation bit
rom ver 1.13.00 wwe
radio ver 1.13.00
protocol ver 137.43
no sevice
turn on flight mode
i switch it on and off (originally was not able)_
get antenna sign with !
You are very confusing. At the very first post, you just mentioned that it "does not go into factory reset". You need to provide more information, example (not limited to) the ROM that you've flashed, the ROM source, method of flashing the ROM, etc etc etc. There is a limit of patience how many rounds of 'suggest-answer' session I can go through. Try to give as much info as you can. For example, you have not even confirmed with me if your phone is a Magician or a Wizard.
From what it seems, your ROM is way too old. Mine is 2.xx.xx version. So, yours is old. Flash a new *official* ROM and try again.
thank you
i thank you what i had was a magician with no service and a wizard with a damaged screen, what i did was swop the screens and unlocked the wizard with locwiz 3 to use my o2 chip now the wizard is fine. but i am in the process of fixing the magician.
i thank u for u'r time

3300 dont start anymore

ive got a htp 3300 from movistar spain and i allready got it unlocked, yesterday i put the wm6 english on it and today y tried to put
PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap, now
i can see only the white htc screen
IPL 3.007.001
SPL 3.07.0000
GSM 02.69.90
OS 1.28.0.0
the phone dont start anymore
y need helpe please
Can you get in to the bootloader?
If you do then you can put an original rom back. If you don't then send it to the service.
An unlocked device is out of warranty so be prepared to pay for the service.
Go to wiki of Artemis there you can find the method to get in to the bootloader.
Goof luck! << you need that.
you meen push the record button and reset in the same time???
i tried this befor but never go in bootloader modus maybe i make something wrong pleas help me
As of this http://forum.xda-developers.com/showthread.php?t=308242#1 threath of meschle states your device is a brik.
I'm sorry to tell you that.
meschle said:
Do Not flash your Artemis with a different carrier/cooked Rom without cid unlocking
--------------------------------------------------------------------------------
Noobs beware!
As a number have been flashing their devices with various roms not from their own carrier or country or cooked roms and bricking their device - I put up this sticky. Your device must be cid unlocked first before you do this. This applies to the coming wm6 roms to - if the rom is not specific to your device - i.e. if you try to flash the upcoming htc 3300 wm6 rom on O2 orbit - you must cid unlock first - with imei check or you will end up with a BRICK!
This does not apply if you are only updating the os http://forum.xda-developers.com/showthread.php?t=299154 or radio.
cid = country id i.e. locked to that country/language/vendor
cid unlock for the artemis is here with USPL http://forum.xda-developers.com/showthread.php?t=311403 (thanks pof)
or here http://www.imei-check.com/c3unlock.php (costs though)
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112...0_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219...0_WWE_SHIP.rar
O2 Orbit WM5 WWE factory rom downloadable here http://rapidshare.com/files/41574866/Arteimg.nbh
O2 Orbit WM6 WWE factory rom downloadable here http://rapidshare.com/files/46377862....90_Shi p.exe
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.
Click to expand...
Click to collapse
movilstore said:
ive got a htp 3300 from movistar spain and i allready got it unlocked, yesterday i put the wm6 english on it and today y tried to put
PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap, now
i can see only the white htc screen
IPL 3.007.001
SPL 3.07.0000
GSM 02.69.90
OS 1.28.0.0
the phone dont start anymore
y need helpe please
Click to expand...
Click to collapse
i had the same problem and took me 3 days to fix it. so maybe this will work for you too !
first take out the battery for 30 min then push the reset button and put the battery back and turn on the device. if this not working. try to start bootloader by pressing and holding the record button and on/off button and push the reset butoon in the same time but keep pressing the record button and on/off button till a colored screen shows up??? sometimes it doesn't appear at the first time so just keep trying .
if you have bootloader you can reflash a rom. but you need to format your memorystick first to fat on your pc then put the image rom (nbh file) and rename it to Arteimg.nbh !! i used OrbitO2UK image.

wrong jamin hard spl

please i need your help
i flashed wrong Hard Spl in my jamin
and now my jamin didn't turn on without charger
and when i try to make conection with usb it turn off and screen flash for a second and turn off
is there is any solve or any thing can i flash from external memory to solve this problem
check your usb cable, still normal, or is no longer! turn the device off and remove it then reenter betere .... try to soft reset the device like this : Use the stylus to lightly press and hold the RESET button on the bottom of your device. Your device restarts and displays the Today screen.
Warning! Always turn off your device before performing a soft reset. To perform a hard reset
Press and hold the CAMERA and COMM MANAGER buttons, and at the same time, use the stylus to press the RESET button at the bottom of your device.
Warning! Always turn off your device before performing a hard reset. Your device will be set back to factory default settings. Please ensure any additional installed applications and/or user data has been backed up before this is performed. if the problem continues go to the bootloader menu and you try to Flash ROM with the original ROMs for your device ....
many thanks for your replay
but i try all this things but the problem still
i think the solve is how to downgrade ipl/spl from 2.21 to original 2.13
is ther is arn way to do this???
why do not you try looking at the WIKI ..? My knowledge on the Wiki is IPL / SPL 2.09, 2.10 to Jamin try and do not despair friend​
I traied a lot of officeal room but in go to 80% and stop
i sucses to downgrade Ipl to 2.20
but i can't downgrade Spl - is there is any way to do this ????

Categories

Resources