Related
Hi,
Wondered if anyone can help me out. I have an XDA Mini S, not been used for a while but now I've tried to use it again and I cannot get it to charge. Sometimes orange light comes on and it looks like its charging but then light starts flashing orange or goes out, device won't stay on more than a few seconds. Also sometimes get red light flashing or constant, anyone seen this??
Thanks.
mrhaddock said:
Hi,
Wondered if anyone can help me out. I have an XDA Mini S, not been used for a while but now I've tried to use it again and I cannot get it to charge. Sometimes orange light comes on and it looks like its charging but then light starts flashing orange or goes out, device won't stay on more than a few seconds. Also sometimes get red light flashing or constant, anyone seen this??
Thanks.
Click to expand...
Click to collapse
battery is dead, get a new one...
It could be that the battery is too dead to get it to boot into windows. I've noticed on my G4 Qtek 9100 Wizard, that if i kill the battery all the way i cannot get it to charge what so ever.
It seems as if the charging circuit will not function unless the device is booted up. I can put the battery into a standalone charger to charge it up a bit, then put it into the Wizard and then it will charge the rest of the way after is has booted into windows.
I made a post previously about this, and got one reply which did not help, as a registry change has no function if the device cannot even turn on to begin with
http://forum.xda-developers.com/showthread.php?t=290370
d0ug said:
It could be that the battery is too dead to get it to boot into windows. I've noticed on my G4 Qtek 9100 Wizard, that if i kill the battery all the way i cannot get it to charge what so ever.
It seems as if the charging circuit will not function unless the device is booted up. I can put the battery into a standalone charger to charge it up a bit, then put it into the Wizard and then it will charge the rest of the way after is has booted into windows.
I made a post previously about this, and got one reply which did not help, as a registry change has no function if the device cannot even turn on to begin with
http://forum.xda-developers.com/showthread.php?t=290370
Click to expand...
Click to collapse
Are you plugging it in with the wall charger? If so maybe the battery is dead?
Doug: The Wizard can not be charged (except by the wall charger or some other method) unless the battery still has juice. It requires extra power to jump start the battery. This is documented in the manual and in lots of places on this board...
frazell said:
Are you plugging it in with the wall charger? If so maybe the battery is dead?
Doug: The Wizard can not be charged (except by the wall charger or some other method) unless the battery still has juice. It requires extra power to jump start the battery. This is documented in the manual and in lots of places on this board...
Click to expand...
Click to collapse
Thanks, I did not know this was an offically known thing. It's unusual from any other standard cell phone or PDA i have owned in the past.
With them I did not need to worry about the battery running down to 0. If it did, I could just plug the phone or PDA in and they would charge, after they had charged for 10min or so there would be enough charge to turn the device on. I perfer to run my battery down to 30-25% before charging again, due to the limit on charge cycles that Lithim-Ion batteries have. Although sometimes i just forget to charge it
Those charge cycles are the reason alot of people kill the capacity of their laptop/phone battery in a few months. They constantly plug and unplug from their AC adapter. Each plugin initiates another charge, even if its just a small top off charge.
Finally got a new battery and still no joy, when i plug charger into phone i get orange light as if its charging but after about 20 seconds the orange light starts flashing (not a missed call/message as phone has been flashed and no sim card in). Do you think the charging circuit could be broken?
hi,
don't know if this is of any use but heres video of problem.
thanks
mrhaddock said:
hi,
don't know if this is of any use but heres video of problem.
thanks
Click to expand...
Click to collapse
Interesting... hmm. Have you tried charging the battery(ies) in a different phone? (eg. a friend's, service provider's store?, etc?) Have you tried a different charger? USB-comp, wall, auto?
--M
Tried a few different chargers, usb cable and car, none of these work, unit worked with new battery but must have been charge present when battery first delivered. Incidently all chargers used do charge my xda orbit so i know they work.
mrhaddock said:
Tried a few different chargers, usb cable and car, none of these work, unit worked with new battery but must have been charge present when battery first delivered. Incidently all chargers used do charge my xda orbit so i know they work.
Click to expand...
Click to collapse
Warrantee service perhaps?
--M
Run out unfortunateley, probably not worth fixing.
mrhaddock said:
Run out unfortunateley, probably not worth fixing.
Click to expand...
Click to collapse
Bummer. Part it out?
--M
Last friday the battery of Qtek 9100 over totally. I was without the charger and USB cable to charge de battery. I charge the cell only in friday night. But any led turn on and the cell phone doesn´t turn on too. I put many hours to charge, but the cell phone still doesn´t turn. What can I do to fix it?
FredyOliva said:
Last friday the battery of Qtek 9100 over totally. I was without the charger and USB cable to charge de battery. I charge the cell only in friday night. But any led turn on and the cell phone doesn´t turn on too. I put many hours to charge, but the cell phone still doesn´t turn. What can I do to fix it?
Click to expand...
Click to collapse
The retention charge of the battery shudn't go below 20%,it seems that the battery has fully diffused of charge,it won't charge with usb cable and pc,cuz its charge output is only 0.5 amp.It'll only charge with the wall charger with an output charge of 1.00 amp.Get it charged with a 'Wall Charger',hope it'll work out,otherwise,you might have to try the "Jump Start" trick.Take a usb to mini usb cable and cut the mini end off. Strip the black and red wires, plug it into your laptop or desktop usb port and touch the black to the negative terminal of your battery and the red to the positive. Hold them in place for about 20-30 seconds, place the battery back in the phone and it should boot and then charge normally. Somewhere on this site you will find this information and a couple of posts from people who used basically the same technique with a nine volt battery,where,a wall charger is cut off in the same way and "Jump Start".
Good luck !
My friend, you are simple the best. You are my hero. I lost one USB cable, but my phone come back. Your "Jump Start" trick worked perfecty. Really thanks about your tip. I don´t have words to glad you.
zabardast_1 said:
The retention charge of the battery shudn't go below 20%,it seems that the battery has fully diffused of charge,it won't charge with usb cable and pc,cuz its charge output is only 0.5 amp.It'll only charge with the wall charger with an output charge of 1.00 amp.Get it charged with a 'Wall Charger',hope it'll work out,otherwise,you might have to try the "Jump Start" trick.Take a usb to mini usb cable and cut the mini end off. Strip the black and red wires, plug it into your laptop or desktop usb port and touch the black to the negative terminal of your battery and the red to the positive. Hold them in place for about 20-30 seconds, place the battery back in the phone and it should boot and then charge normally. Somewhere on this site you will find this information and a couple of posts from people who used basically the same technique with a nine volt battery,where,a wall charger is cut off in the same way and "Jump Start".
Good luck !
Click to expand...
Click to collapse
Thanks !
really glade you have it up and running
Have a nice day !
zabardast_1 said:
Thanks !
really glade you have it up and running
Have a nice day !
Click to expand...
Click to collapse
I'd like to know if is it possible update ROM by RUU with Windows Vista? I download a ROM S.N.N_ver._2.0 and tried update, but gone a error when the process will begin. Is there a way to fix?
FredyOliva said:
I'd like to know if is it possible update ROM by RUU with Windows Vista? I download a ROM S.N.N_ver._2.0 and tried update, but gone a error when the process will begin. Is there a way to fix?
Click to expand...
Click to collapse
Its much easier and trouble free to flash with WinXP and its recommended highly,as winVista still has some compatibility problems.So I advise you to flash with winXp OS.
But some people have successfully flashed through winVista,you need to download some drivers.check out this link,there are complete instructions for flashing with winVista :-
http://www.anichillus.net/index.php?topic=21.0
Cheers!
zabardast_1 said:
Its much easier and trouble free to flash with WinXP and its recommended highly,as winVista still has some compatibility problems.So I advise you to flash with winXp OS.
But some people have successfully flashed through winVista,you need to download some drivers.check out this link,there are complete instructions for flashing with winVista :-
http://www.anichillus.net/index.php?topic=21.0
Cheers!
Click to expand...
Click to collapse
Thanks one more time and sorry to annoying you...
I LOVE YOU !!!
Thanks more than a lot
Jump start trick worked fine for me too !! I cut the wire off from old usb mouse and use it as informed.
I just cant understand how it could be so that if you let the battery power too low or empty the wall charger (5v/1A) will not begin to charge it again ???
But my battery is alive again and I m happy, thank you !
jagr55 said:
I just cant understand how it could be so that if you let the battery power too low or empty the wall charger (5v/1A) will not begin to charge it again ???
Click to expand...
Click to collapse
It's just a design flaw. Sometimes things get by engineers. They're too busy trying to create an interesting user experience, and they forget to cross t's and dot i's.
This worked for me as well!!!
Thank you so much, dude... helped me resurrect my Wizard who'se been dead for like 3 months now!!!
iceblade911 said:
This worked for me as well!!!
Thank you so much, dude... helped me resurrect my Wizard who'se been dead for like 3 months now!!!
Click to expand...
Click to collapse
Thanks you all,it was grrrrr8 to hear you all got your phones working again.
Have a nice day !
my qtek 9100 freezes at startup after jump starting.
I jump started my Qtek 9100 and it started up as normal but it freezes at the windows mobile loading screen and doesnt go any further. Does this mean its charging or is the battery completely dead or something?
Wow, it like totally worked but Then I let it charge but battery stays at 0%
Thanks for this thread.
My word am I happy ...
Worked like a charm...
You are my hero! mi Qtek is alive again, i bought a cheap wall charger for a V3 Motorola and it can charge my Qtek after a battery drain off, i tray a lot of things but the usb wire cut off solve my problem and im happy again, thanks a lot and greetings from mexico! Saludos!!
Thanks man it was worked for me,
I was trying to put windows mobile 6 but after that mu camera and voice call buttons doesn't work
If you know more about win mobile 6 on wizard pls help me
Thanks
please do not use stripped USB cable or 9V battery to resurrect wizard. the battery is rated 3.6-3.7V (?? cant remember)... use 3x AA(A) batteries or other 3-4V power supply. I've done this with old pc PSU which has 3.3V output.
Just put battery in, connect charger, connect + - cables while inside wizard - bootup - when windows is loaded device can charge itself - disconnect resurrection power supply.
do not try to charge li-ion battery with whatever currents/voltages... or at least wear some kind of fire protection
Hi,
My wizard main battery (wiza16) was very low and the wizard stop with a message “The internal battery is very low”. After coming back home I have tried to charge but it is not taking charge and didn’t turn on anymore. I recently bought a new battery (wiza16, 3.7 VDC, 1250 mAH) thinking that it will work again but still the same problem, wizard is not taking charge or turn on.
Can anyone help me?? What can I do to start my wizard? Do I need to change the tiny little battery (which is inside the wizard)? Kindly help me.
Wizard service manual
Hi,
See if when you connect the power plug the led turns red, if yes....
If Charge light is red when plug in AC adapter, it means the main battery is not charge enough and can’t power on,
You just need to continue charge unit the light become Amber
If not, i think you have a problem.
Check if charger its working and if its pluged.
If it helps --- ftp://ftp.xda-developers.com/Wizard/Docs_Tutorials/Wizard_Service_Manual.pdf
Wizard Battery discharge completely
Hi,
Thanks for quick reply. there is no light when i connect my wizard with PC. I don't have the AC charger, I have lost that for long and was using my PC usb to charge. trying to get one AC charger.
There was no problem with my wizard, just can't turn on after it's battery discharge completely. Even the new battery couldn't turn that on.
You'll need the original charger if the battery has complelty discharged as it will only charge from the computer if the phone is powered on.
This happened to me before.
There is a trick to giving the battery a quick charge which will give it enough juice to boot the phone up and allow it to charge from usb. its not recommended but works.
You will need a spare usb cable, cut one end of, strip the wires back and connect the red wire to + and the black to - on the battery, only do it for a short period, about 30 seconds while conneted to your computer.
You may need to give it a few 30 second bursts to give it enough juice.
Pop the battery back into the phone and switch it on while pugged into the PC
Took me a few attempts to get enough charge in the battery for it to boot up.
Wizard battery
You can also use a 9V battery to jumpstart your battery. But then you have to be more careful. I connected the 9v battery to my Wizard battery for about 15 seconds, then tried to start up my device. If not successful I started again with 15 seconds jumpstart..
But you can find more information here in the forum: just search for jumpstart or something similar....
Regards
huibuh_!
Wizard Battery discharge completely
Thank you all for information. 9V battery method didn't work for me. Looking for AC charger online and get a link (http://www2.dustin.se/pd_5010073700.aspx). Do you think this is the right one? If yes, then I can order.
yea that's the right one but if you have a friend with a ppc or maybe a razor you can use there charger most ac adapters are starting to use mini usb just a way of saving some money even though having an ac adapter is good
could also try and get one of those usb plugs that you can plug up to a wall and plug in a usb cable into the slot
but don't take my word for this wit hmy wizard i haven't had it shut all the way day
if anybody can verify this would work
AC charger not also working
I have got the AC charger yesterday. When Connect the Ac charger first time the red light on my wizard showed for just half second then dissappear. Still let that connected for whole night but no response.
Thank you all for help.
@Keland44, most Razr chargers dont work, they MUST be at least 850mA in order for the Wizard's battery to receive anything. The older Razr chargers are sometimes as low as 350mA, but the never ones are as high as 1.2A, so you need to read the label on the charger itself to be sure.
ashasaur said:
@Keland44, most Razr chargers dont work, they MUST be at least 850mA in order for the Wizard's battery to receive anything. The older Razr chargers are sometimes as low as 350mA, but the never ones are as high as 1.2A, so you need to read the label on the charger itself to be sure.
Click to expand...
Click to collapse
Yup that is about right,
If the battery is complelty dead, then you need to original charger.
If you have got the right charger and you get a red light and it goes off. your phone might have a problem.
This happened to my last wizard after stupidly trying to dry out the screen after getting it wet which stopped the touchscreen working (i was drying it out while the phone was still on) well my wizard crashed.
Took ages to get it back on but it was very unreliable then one day, it wouldnt go on and charger done nothing. Unpluging and pluging the charger in several times got a red light on.
Sometimes i could get it to turn on, the charger would charge for about 5 minutes then the phone would die soon after.
Your phone might possibly be bricked.
Help :
I Have Same Problem with my wizard
Yesterday my wizard goes died, i think the battery out
when i came home, i use AC Charger for HTC Universal, for 1st time its red light then off,
after 15 minutes orange light, i try to turn on my wizard and works but only in boot loader 5 minutes again its going off again
until now my wizard wont turn on
some body help
Hi Guys
I have a problem with my TyTN at the moment.
My device is not charging.
Yesterday i put it in my Docking Station and wait a little time.
But Now the Tynt isnt charged.
I think ist a Problem with my TyTN Hardware.
I have all Power Supplys used they i have, but it doesent work.
Can you help me?
Its this a problem with the accu or a fuse on the circuit ?
Sorry for my broken english i hope you understand me.
Regards Patrik Laube
Hello,
first of all, try to soft reset the device.
If it fails, hard reset it.
If it doesn't work, go the service center.
Good luck
The above advice is fine. But you did not say if any of the LEDs are lit.
Do you get the red NO CHARGE LED?
Does your phone operate normally except for not charging?
Mike
Hello
My Phone is working fine but i cant charge it with the original HTC adapter.
I must load the accu with a special loader.
USB and Charge dont work....
And i have no warranty I cant send it to my operator.
When i plug in the USB Cable it doesent make everthing.
I think it was a to high voltage on the USB or the USB Ground ( - ) had a electrical Power for a litte moment.
Have you an idea?
Thanks for yur help.
Regards Patrik
I had a similar problem, which was sorted by a new rom, but I ascertained it was software problem when I realised it charged when powered off.
PatrikLaube said:
Hello
USB and Charge dont work....
And i have no warranty I cant send it to my operator.
Have you an idea?
Thanks for yur help.
Regards Patrik
Click to expand...
Click to collapse
hi,
try this: when your device is connected via usb, tab on the battery icon in the taskbar on you device, go to the register "advanced" and check/uncheck "When Device is turned on, do not charge the battery when connected to the pc"
thats it
greetz
mizi
I'm having an issue along these lines, also.
My phone has been working fine untill the other night when I tried to charge it via the wall electrical outlet. It will not charge at all, the battery has been drained to nothing and I can't turn it on. The yellowish light doesn't turn on when I plug it in like it used to.
I don't know if this is a battery issue or an issue with the USB connection inside of the phone. On a side note, when it did have power and I tried to connect it to the USB via the PC; it didn't work. The phone was on, but the computer didn't even notice the phone was plugged in. That leads me to believe it would be a connection issue; but I'm not quite sure.
If anyone has anything they can add to this I would appreciate it, thank you.
P.S. Bringing it to a service center is a bit out of the question in the mean time seeing as it was bought on eBay and funds are limited for the time-being.
MiZi666 said:
hi,
try this: when your device is connected via usb, tab on the battery icon in the taskbar on you device, go to the register "advanced" and check/uncheck "When Device is turned on, do not charge the battery when connected to the pc"
thats it
greetz
mizi
Click to expand...
Click to collapse
Hello, I cannot find the "When Device is turned on, do not charge the battery when connected to the pc" in my device. My Rom is WM6.1 CE OS 5.2.20273 cooked by dvha79_ddt.
My HTC TyTN has the sample problem, but i can use the USB to charge normally. It cannot work using my AC adapter Only when the device is open...
About your Battery Issue.
I'll tell you exactly why ur phone isnt charging anymore... If you have been charging it alot on the USB or pretty much any!! charging on the USB u have killed ur battery, never charge your phone on the USB it kinda sucks they should make these phones able to be Sync'd thru USB without a battery cause these batteries should not be powered thru the USB over Time... from syncing to your pc will kill these batteries i have noticed that when u sync this Tytn Ithru USB and the device is at say 70% it charges up to 100% pretty fast i would recommand to you and anyone who reads this dont sync your TYTN or any HTCC phone for to long to the USB Cause it will Trash your batteries Life down the road... Hope this was HELPFUL.
Cheers
Paul
PatrikLaube said:
Hello
My Phone is working fine but i cant charge it with the original HTC adapter.
I must load the accu with a special loader.
USB and Charge dont work....
And i have no warranty I cant send it to my operator.
When i plug in the USB Cable it doesent make everthing.
I think it was a to high voltage on the USB or the USB Ground ( - ) had a electrical Power for a litte moment.
Have you an idea?
Thanks for yur help.
Regards Patrik
Click to expand...
Click to collapse
hi, did anyone solve this problem ? ive got the same problem with my htc touch cruise, i think it charges when turned off but doesnt when on. the orange light doesnt turn on when i plug usb to charge it and it doesnt sync thru the PC neither.
Does anyone has a solution to this ?Thanks a lot!
does anyone has a solution to this ?
hi, did anyone solve this problem ? ive got the same problem with my htc touch cruise, i think it charges when turned off but doesnt when on. the orange light doesnt turn on when i plug usb to charge it and it doesnt sync thru the PC neither.
Does anyone has a solution to this ?Thanks a lot!
^I'm having the same problem with my herm200. I did the soft reset, hard reset changed ROMs but still the same problem. I don't think it's the usb connector because if it is it wouldn't have been able to charge the phone even if it's turned off. Before I'm able to charge it turned on but it would take a few minutes before the orange led turns on, but when I use the phone or if I receive a text the orange led would turn off it's like the charger disconnects but after a few minutes it would go back again. Now it just wouldn't charge turned on, sometimes it gets worse where it just wouldn't charge on or off.
Now I'm already planning to buy an external battery charger.
gypsygirl13 said:
^I'm having the same problem with my herm200. I did the soft reset, hard reset changed ROMs but still the same problem. I don't think it's the usb connector because if it is it wouldn't have been able to charge the phone even if it's turned off. Before I'm able to charge it turned on but it would take a few minutes before the orange led turns on, but when I use the phone or if I receive a text the orange led would turn off it's like the charger disconnects but after a few minutes it would go back again. Now it just wouldn't charge turned on, sometimes it gets worse where it just wouldn't charge on or off.
Now I'm already planning to buy an external battery charger.
Click to expand...
Click to collapse
Are you using an official 1000mA charger? (Not a 500mA one) 500mA ones work, but they are under-powered and can cause strange behaviour, like not charging whilst turned on or whilst on a call. Similar problems can be found with car-chargers that will not charge until the device is soft reset.
Mike
^no it's not the official charger, I have this usb wall charger called Power Juice (phone and mp3 charger).
Input Voltage: AC100-240V
Output Voltage: 5V
Output Current:1000mAh
Do you think it's because I'm not using the original charger?
fixed my charging problems
The boyfriend told me to try a new cable for my charger so he bought me a 5pin usb cable, tried it at home and it worked! I still need to turn off the screen sometimes but that's ok at least I don't have to turn off the phone anymore. Now my battery charges less than 3 hours.
Hold both SoftKeys and Then press the Power button
Or you can also hold both softkeys and then put your stylus into the reset hole.
answer why it does not charge through the usb
Sorry for the very very late response. Under electrical legislation all hand held electrical devices must be insulated and fused. Some of the chargers that you can purchase are sealed without fuse which indicates that the phone has a fuse contained within its circuitry (or there may be 2 fuses one in each device) .
The problem you have encountered is that you have connected your phone to a computer or mains supply to charge. There has been a surge in the electrical supply either on connection or by un-connecting from these supplies (e.g. connect to the computer as it is booting would see a 65w signal through the USB) and this more often than not blows the fuse which sits on the PCB (printed circuit board) just after the usb connection internally to the phone.
you can either have the fuse fixed for 20/25 gbp or you can purchase a new circuit board or you can use an external charger for the battery. As it is only the power input point that is faulty.
hope this helps
Since we are at this non-charging & battery issue, I would like to ask this question on the D838pro. My battery won't charge even after 24 hours of charging. The red LED blinks thru the whole process. The LED did not turn on to orange or green. It is the battery problem because my spare battery works well. I would like to know what is wrong with the battery as I am willing to strip down the battery. Could it be the battery circuit or wiring that had fired?
cyberdroxxx said:
Since we are at this non-charging & battery issue, I would like to ask this question on the D838pro. My battery won't charge even after 24 hours of charging. The red LED blinks thru the whole process. The LED did not turn on to orange or green. It is the battery problem because my spare battery works well. I would like to know what is wrong with the battery as I am willing to strip down the battery. Could it be the battery circuit or wiring that had fired?
Click to expand...
Click to collapse
Never tried stripping down a battery, some things... well, just don't seem worth it. However as a learning exercise it might be interesting. Without lots of testing on a good battery with a multimeter then I have no clue what the readings should be between all the contacts. (Now there's a little job for you) It is as likely the internal structure of the battery is screwed as it is to be a wiring problem.
If you solve it you can certainly report back here
Mike
Thats right.. last night i left my Leo charging, today when i woke up i noticed that the battery level was very low so.. i unplugged it and plugged it again, noticed that the orange led wasnt lighting up, neither was the phone charging.
The phone gets very very very hot when plugged to charger or USB port on my computer and does not charge at all.
Tried it all, left it all day long with the battery out of the phone, tried charging without it in.. and nothing..it just gets very hot where the connectors (pins) make contact with the battery.
Now im trying to charge the battery on a cradle to flash it with stock rom and SPL to get it to warranty..
Any of you guys has any thoughts?
I see i posted in the wrong section.
Thank u mod
Do you always charge via usb into pc? Is your cradle plugged into the wall or pc? I don't know if you have done this, probably so, but check in windows settings->system->Power and inside the battery tab see if the "When phone is on, do not charge the battery when connected to a PC" is checked.
Sean3 said:
Do you always charge via usb into pc? Is your cradle plugged into the wall or pc? I don't know if you have done this, probably so, but check in windows settings->system->Power and inside the battery tab see if the "When phone is on, do not charge the battery when connected to a PC."
Click to expand...
Click to collapse
Yeah.. it crossed my mind to check for it, and that option is unchecked.
Though the charging "orange" led doesnt turn on even if the phone is off.
I usually charge it via usb->pc, allthough i tested with the wall charger and nothing.
I suspect it must have been a power surge that burnt in some way the PBC of the "charging module..thing"
Thanks for the suggestion
i'd check that none of the pins for the battery are in contact with each other if there is heat in that area.
Ok, I'm assuming then that the phone works, but just has low battery at the moment. If that's the case then it doesn't appear to be the battery or the leads. Any chance it's the cable? That of course assumes your using the same one with the cradle. I ask because my device didn't come with a wall charger, just a usb cable so I had to get a few extra plus a wall plug-in with a usb port.
Jack E said:
i'd check that none of the pins for the battery are in contact with each other if there is heat in that area.
Click to expand...
Click to collapse
Yep already checked it..although if it was something wrong with the pins the phone wouldnt turn on.. i dunno
Sean3 said:
Ok, I'm assuming then that the phone works, but just has low battery at the moment. If that's the case then it doesn't appear to be the battery or the leads. Any chance it's the cable? That of course assumes your using the same one with the cradle. I ask because my device didn't come with a wall charger, just a usb cable so I had to get a few extra plus a wall plug-in with a usb port.
Click to expand...
Click to collapse
I have a car charger also.. and nothing.
Your leo didnt came with a wall charger?
BillReed said:
I have a car charger also.. and nothing.
Your leo didnt came with a wall charger?
Click to expand...
Click to collapse
Weird, but unfortunately it didn't. I think being in the US and getting the device from Telstra in Australia may be why I didn't. Well, if it is a hardware problem and you can't get it to charge from the device, I believe you can get a cradle that will allow you to charge the battery independant of the phone. I know it's not the best option on the planet, but it would get your battery where it needs to be to flash and confirm whether or not it's a charging issue with the battery itself.
Come to think of it, this did happen to me several weeks ago. I plugged the phone in before bed as usual and noticed the charging light didn't go on and the battery drained overnight from about 60% to 15%, which it shouldn't have done. Not in standby at least. Soft-reset the next day fixed it. It hasn't done it since. I was installing a bunch of things that evening, which may have been what did it.
I had a same problem with my hd2 and by some miracle and few days of pain
it workd again...and it workd about 5 days and same thing happend al over again...and I think I have solution!
It may be stupid but it work for me...
try to connect your hd2 to charger but without battery and then insert the battery and it should start up your phone and charging...
I apologizes for my poor english
mikelebrat said:
I had a same problem with my hd2 and by some miracle and few days of pain
it workd again...and it workd about 5 days and same thing happend al over again...and I think I have solution!
It may be stupid but it work for me...
try to connect your hd2 to charger but without battery and then insert the battery and it should start up your phone and charging...
I apologizes for my poor english
Click to expand...
Click to collapse
I'll try that when i arrive home..