Buggy Memory Allocation - JAM, MDA Compact, S100 General

If I set the memory allocation towards storage too low on my Magician (ie. less than 6MB) then the allocator automatically jumps back to its default 50/50 split. Why? And can I somehow hardwire the memory allocation so it won't do that?
Thanks!

Well,I'm new to this forum but I'm proud MDA Compact user for some time. If You want to lower your storage space just turn the slider to 4ex. 4,5MB and click OK before it returns. I had a similar problem and it helped.

It does'nt help in my case...

I think you can disable automatic memory allocation with SKTools. http://s-k-tools.com/

Its done in a different way.
add a key in registry
HKCU\Software\Microsoft\Shell\ press new/string in name type NeverDorkMemory
then save now the memory wont jump back to 50\50
PS in storage memory must be minimum 5mb

Related

How to disable WM automatic RAM handling?

Hi,
in my struggle to free as much ram as possible (by moving to storage/SD every single bit i could) i was able to reduce the (static) RAM i'm using to 1.68MB, even retaining all my needed application (in SD) and two Today plugin in RAM.
With an available total RAM size of 57.41MB, i should be able to use 57.41-1.68 MB of dynamic RAM.
The problem is WM won't let me to do it.
To free more dynamic RAM, i should move to the left the static-dynamic memory slider in Start->Setting->System->Memory BUT whenever i try to lower it under about 9mb, WM reset the slider to it's original position (about in the middle of the bar).
This way i'm forced to allocate more than 10MB (9 + 1.68) to static RAM even if i'm using ONLY 1.68MB and i'm not going to use anymore.
Is there a way to AVOID the S.O. resetting the slider or, at least, to let me assign the static RAM no more than 3 or 4MB???
What's the point in relocating every program, dll, htm and so on to SD card if i'm still obliged to waste 10MB of precious RAM???
PLS help me!!!
Bye bye,
Isidoro
I think you will be able to further lower the Storage memory when your Program memory reached about 0.75 of its allocated slot.
Have you ever try using almost all your allocated Program memory, and see if you can reduce the Storage memory even further? I'd like to see if it can be done.
billabong said:
I think you will be able to further lower the Storage memory when your Program memory reached about 0.75 of its allocated slot.
Have you ever try using almost all your allocated Program memory, and see if you can reduce the Storage memory even further? I'd like to see if it can be done.
Click to expand...
Click to collapse
Uhm... i should try. Maybe when using pocketgba. I'll let you know.
billabong said:
I think you will be able to further lower the Storage memory when your Program memory reached about 0.75 of its allocated slot.
Click to expand...
Click to collapse
There isn't a way to reduce this value? (0.75?)

What happened to the Memory Management Slider???

In WM2003SE there was a slider in the memory management that allowed us to allocated the ammount of memory we wanted for programs or storage.
Wheres it gone and is it possible to have it back??
No. Because WM5 doesn't use RAM as a storage area.
Thanks for the reply.
If I cant have the slider back is there any way of forcing WM5 to reduce the ammount of Storage it reserves, as I always have around 23Mb free which I just dont need.
if I could reduce this to 15MB this would free up 8Mb for my programs which then would make them fly instead I have to run SK-Tool Free up Ram application about 3 times aday to try and recover 2 or 3 Mb from the storage to give back to programs to help them run........especially the phone which is VERY tempermental when the program memory drops to around 15Mb, at this level I get alot of missed calls as the phone takes too long to respond.
There are two different types of memory in the Universal, one is flash (storage) and one is RAM (for executing applications), you can't change one into the other.
It's still there..just that MS overlayed a new panel onto the existing window and froze the controls. Just wait till the universal starts to hang, go into the Memory panel in Settings.. :evil:

Adjusting storage memory and program memory

Hi, is there a way to adjust the memory usage for the program, like adjust the storage and give it to program. Not like xda, the prophet does have a slider for the memory but could not be adjusted. Is there anyway how to go over this ?
Prophet, as well as many new WM5 devices have (physically) separate program and storage memories. And thus there is no built in way to adjust the amounts of the two.
The Prophet has a 64MB Ram and a 128MB Flash Size with a storage size of 42.55. Where did the 44.01 MB program came from? Is there a way to increase the MB size for the program? Because I believe that even though you can install several program using the storage, a portion of the program memory gets filled up until at the critical level, which will later play an important part once you start running a program which needs a higher memory. Any remedy to this?
The 64MB RAM is what I think should be called 'box figure'. It's what's printed on the box.
In reality you get 50+ actual RAM at leas 10 of which go to various OS functions and the rest is left for running programs to use.
Under WM5 non of it is used for files, but when you run programs, even built-in ones there are sometimes memory leaks which means that even though you closed the program some of the memory (sometimes more them 1MB) remains occupied.
The only known way to fully reclaim memory is to soft reset the device. I do it on my Jamin once a week when I am left with 12-10MB free.
Unfortunately, there is no way to add RAM to device.

Question regarding the Internal memory of O2 XDA Exec

Hi all,
Could anyone please tell me the differences between the storage memory and the program memory? Yeah, I know this might sounds stupid and I also wish that the answer is really that straight forward.
I always thought that 'Program Memory' is suppose the memory quota for us to install application & softwares. Where, storage memory is just simply the portion of memory where we stores data that we creates.
But whenever I install applications, 'storage' is the memory which always to be used up. Yet, I can hardly use up my 'program' portion of memory...
Can anyone tell me why? and how to install applications in the program memory instead of storage memory?
Thank you very much.
Cheers!
Search would have helped a great deal here, FAQ.
Storage is Flash
Programs is RAM
WM5 works the same way as a desktop. It loads the OS from disk to RAM when you power it on. When you remove the battery everything is safely stored to disc, not RAM as WM2003 was. Battery can go flat, no backup battery needed.
PReDiToR said:
Search would have helped a great deal here, FAQ.
Storage is Flash
Programs is RAM
WM5 works the same way as a desktop. It loads the OS from disk to RAM when you power it on. When you remove the battery everything is safely stored to disc, not RAM as WM2003 was. Battery can go flat, no backup battery needed.
Click to expand...
Click to collapse
..... so how do you save stuff to Program memory? Or is that just temp momory that stuff runs from when you execute it?
You can`t save stuff to program memory.The program memory is like the RAM in your PC,just used for temporary storage and running programs.The storage memory is like the hard drive in your PC,used for actually `storing` data.
liverman666 said:
You can`t save stuff to program memory.The program memory is like the RAM in your PC,just used for temporary storage and running programs.The storage memory is like the hard drive in your PC,used for actually `storing` data.
Click to expand...
Click to collapse
So why do they bother displaying it on the memory settings?
And does that mean it's different to how it was on the XDA2? That used to have a slider allowing you to change the allocation for storage/program memory.
RE
I find storage memory is the one you need to watch out. As you install more programs whether to SD card or to Program memory the storage memory goes down
Too low storage memory and your system will not perform properly. Install programs with large file size first then follow by programs with smaller file size otherwise you'll encounter installation 'Not enough memory' if you do it the other way round

Reallocation of memory

I remember with my old Ipaq 4150 i could reassign memory from storage to programs. my current p3600i has a miserable 21mb of program space only, when everything else is all shut down. is there a way to reassign the many storage space i have to program use, with a 3rd party software or not?
since wm5 all storage is located in flash
and all normal memory is application memory
flash only got a limited number of writes before it dies
and writes ALOT! slower then application memory
but flash keep it's data even if all power is lost
there are programs to use application memory as a flashdisk for storage
but not the other way around
i would look into using less today items and today items which use less application memory
and possibly look in windows\startup for auto started programs which you dont need

Categories

Resources