Is there a basic large PHONE pad available ? - 8525, TyTN, MDA Vario II, JasJam General

Just wondering if there is a very basic phone pad skin available for the M3100...
Just a single line for the number, maybe 2 if the number is too long so the digits don't get too small...
Large buttons for numbers, no video buttons etc just numbers, no need for the TALK/END sort of stuff as the hardware green/red buttons work fine..
Just looking for something that people with wide fingers can use without a stylus....
If there isn't one, what do I need to do to create one ??
Searched the forum but can't really find anything of use on the subject.
Many thanks Phil

I found that the vista theme on Paulya.com worked wonders for this:
http://www.paulya.com/etenskins.htm
http://www.paulya.com/Projects/Eten_Skins/Vista/Vista_Trans/Vista_Trans_Origin.zip
I am tempted to go back to this dialer as it was so good on my Wizard - just lacks a video button.

Hi, Thanks for that.... Managed to get the skin to work that is included with the eten dialer... I also downloaded the eten_ans etc .zip and put it in the windows dir on the phone after extracting it.. can't seem to find how to enable it (am I thick or something... Don't answer that !!)
The only thing I didn't do was use active sync... I copied the extracted file to my memory card then copied them over from that as the PC I'm at, at the moment doesn't run activesync 4 or higher (horrible win98 se machine..
Any comments much appreciated
Phil

I jast ran the cab file from my storage card and it installed perfectly. I did have diffulculty installing additional skins though.

Hi Phil,
There is a CAB on the FTP here which gives you the phonepad software EXACTLY like in older HTC phones: ftp://xda:[email protected]/Hermes/Tools_and_Programs/Phone Pad - English Only.CAB
I installed it and it's great!
Gavin.

GavinN said:
Hi Phil,
There is a CAB on the FTP here which gives you the phonepad software EXACTLY like in older HTC phones: ftp://xda:[email protected]/Hermes/Tools_and_Programs/Phone Pad - English Only.CAB
I installed it and it's great!
Gavin.
Click to expand...
Click to collapse
Great - Any chance of a screenshot?

Have you guys seen Buzz's Virgy DeepOcean Dialer for WM5 QVGA?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://buzzdev.net/component/option,com_remository/func,fileinfo/id,335/
V

Hi sorry to be thick
ok i downloaded the buzzdev.net qvga dialer
but how does one install it. Do i just run the cab via activesync or run it on the vario2 or what sorry about the stupid questions
also i download the splash screen stuff from there too how do i make that appear instead of the default tmobile one when starting up
thanks
JEREMY

Just stick it onto your device, tap it to load it, install and then when prompted reboot (just hit OK and it'll do it) - the PIN entry screen remains the same, but the main dialer screen changes.
It looks very nice, and I'd use it all the time - except there's no way to use the T9 dialing feature which the regular dialer offers (where you can just type the name of the person you wish to call and it shows all valid entries from the list, so e.g. if I wanted to call my Mum - whose entry is Mum, ironically - I'd type 6-8-6 and then hit Dial). It's quite sad to see that this feature is missing, probably for a good reason as it does cause a fair bit of slowdown on my phone - more than on my old Alpine! - but I still use it all the time and I'm going to have to uninstall the skin because I really neeeeeeeeed that feature. :/

ok if I wanted to get the original tmobile dialer back then all I would have to do is uninstall it then? cool
how would I install the splash screen then?
Jeremy

Vijay55,
I installed it OK, the large buttons are awesome, however I have had the following problems:
1) DTMF (Tones) don't work properley when accessing voice mail etc (UK T-mobile) or any other press x application
2) Jog Dialer not active
3) No Smart dialling
Am I doing anything wrong?
Have had to pull it off becasue of the DTMF problem, I've installed it, removed it, rebooted, changed the options etc, nothing seems to fix it.

Fixed it!!
Though I am now using the Eten dialler with smart dial support and one of Paulya's Dark Blue Glass skins.
Editing the registry and setting the value to 0, then soft reboot and dtmf tones are working.
Setting it to 0 wasn't the obvious choice, and previously I hadn't soft rebooted.
Found the following from dhushy in:
http://forum.xda-developers.com/showthread.php?t=276700
Worked it out. For anyone with a similar problem, use the registry editor to locate the following key:
HKLM,"Drivers\BuiltIn\RIL","EnableDTMFSupport",0x0 0010001,1
Change the value from 1 to a 0 and Bob's yer Uncle (for non-British readers that means everything will be cushty - see Only Fools and Horses for a contextual translation)
Did this and I was able to manipulate my voicemail messages as normal.
Click to expand...
Click to collapse
I am on T-Mobile UK.

Related

Anyone knows this dialer skin/program

Hi,
I found this image off a K-JAM with the beuatifull dialer. Since there is a photo within the skin I dount that it's the default WM5 dailer, it might be a third party dialer cause I don't think this would be skinnable with the default dialer.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I love and want it :mrgreen:
TIA, cheers,
C.a.c.t.u.s
It's a mockup used in the Magneto presentations by Microsoft.
I talk about it here:
http://forum.xda-developers.com/viewtopic.php?t=33971&start=22
but if you search for "halo skin" you'll find some discussions.
V
Thanks. I guess I got some reading to do then
Cheers,
C.a.c.t.u.s.
Thats cool... but I bet its not funcional..
Terran
I downloaded the WM5 SDK and the emulator of WM5 has that dialer skin. And that is what i was expecteing, i really want this skin!!
with the new ETEN M600 this skin can be installed as a separated file in the extende rom, so if someone could upload this file from the M600 extended rom, i think it will be easily installed on any ppc
CIAO!
VOODOOS!L
with the new ETEN M600 this skin can be installed as a separated file in the extende rom, so if someone could upload this file from the M600 extended rom, i think it will be easily installed on any ppc
CIAO!
VOODOOS!L
Just came across this post and thought I would show some Wizard users this COOL phone pad (IMO if you dont use smart dial then this is SOOOOO much better, does not seam to work with smart dial but I only tested on an emulator)
Heres some pics.
I also uploaded the cab. You have to make sure you dotn have smart dial installed (installed by default from EXT rom on most of these phones. I installed smart dial after the ETEN skin and I got that wierd one you see above. I dotn know what will happen if you install ETEN after smart dial.
REMOVED THIS LINK BECAUSE OF CONFUSION, YOU HAVE TO LOG IN TO SEE THE DOWNLOAD LINK
One of the fun things about this is you can change the color of the skin in photoshop in about 5 min tops. The buttons are all BMP's and are very easy to change the hue and make it a different color. I ran a batch job in PS to change the hue to blue (last pic) to me just a few min.
I am going to upload a ZIP with the default orange and a grey (grey is a good base for a hue change)
Have fun; Lew
Hi there, Where can I get the blue color dialer skin? and How do I install it ?
Thanks
lewcamino said:
Just came across this post and thought I would show some Wizard users this COOL phone pad (IMO if you dont use smart dial then this is SOOOOO much better, does not seam to work with smart dial but I only tested on an emulator)
Heres some pics.
I also uploaded the cab. You have to make sure you dotn have smart dial installed (installed by default from EXT rom on most of these phones. I installed smart dial after the ETEN skin and I got that wierd one you see above. I dotn know what will happen if you install ETEN after smart dial.
E-TEN M600 Dialer Skin
One of the fun things about this is you can change the color of the skin in photoshop in about 5 min tops. The buttons are all BMP's and are very easy to change the hue and make it a different color. I ran a batch job in PS to change the hue to blue (last pic) to me just a few min.
I am going to upload a ZIP with the default orange and a grey (grey is a good base for a hue change)
Have fun; Lew
Click to expand...
Click to collapse
How do I remove smart dialler from my htc wizard so that I can use this skin
Just installed it on my HTC Wizard with latest Qtek Rom, works perfect after a soft-reset.
I´m also intressed in getting hold of the blue skin...
Please
Hi, nice work!
Can you upload also the blue skin please? In which folder do I have to put all the buttons BMP files?
Thanks
peppepep said:
Hi, nice work!
Can you upload also the blue skin please? In which folder do I have to put all the buttons BMP files?
Thanks
Click to expand...
Click to collapse
Just unzip it and run the cab file from your PPC.
There's no CAB in that archive...
I'm interested in this too - the standard dialer's buttons are way too small for my fingers.
paulrus said:
There's no CAB in that archive...
I'm interested in this too - the standard dialer's buttons are way too small for my fingers.
Click to expand...
Click to collapse
Unzip it!!
and you will see the CAB file
i have just installed the blue theme on my 9100 which had smart dialer working, it has installed and displayed correctly, however smart dialer no longer works.
When I unzip it, I don't see a CAB file, I see a huge list of files like:
00CLG_IN.002
0CLG_OUT.004
0ETPHONE.001
0SPD_LST.058
But there's no CAB.
I'm on a Mac if that makes a difference.
@Paulrus
The file you are trying to extract IS the CAB file, just transfer it to your device and install it.
@ Everybody else
Where can I change the colors, in other words, how can I change between the Orange and Grey theme, where are these files on my device?
Ok - then the file posted is not a .zip file it's a .cab file because that's the file I'm unzipping.
Thanks for clarifying that!
EDIT: Ok - this is a Mac thing. Stuffit not only expands the zip file, but also expands the cab file at the same time. So it looks like the cab files are coming from the zip.
Paul

Project: Green Caterpillar

Well...
the blue Today Screen and color scheme is very cool,
the guava theme is pretty too...
why not something in green?
I just started Project: Green Catapillar.
Besides purposes of green theme in Today Screen, Dial Pad, and other colors in Windows Mobile, I increased the size of Today Screen. In my version it will hide taskbar completely, but only when you review Today Screen. When you open any other application or window, the taskbar will back. Popup menu allows you to change the size and get options.
Please don't ask me, where you can download files. When I finish this project, I will publish even beta version here, in this forum for free.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
JGUI
looks very nice... :shock:
today status
current status of this project:
hmm looks interesting..can't wait
When will it be released? U know how eager the forum is to try new things
any word on this ??
pls keep us posted man
/drool
Make sure to add the smart dialer screen in there!!
installers
The first installers I can share:
Boot Screen:
the second one "Windows Mobile" changed to green hue.
Today Screen Theme:
portrait, landscape and square orientations
New Phone Dialer:
you have to have the E-TEN M600 skin dialer installed on your device, before you start my replacement. GreenCatapillar will only replace images. I'm sure you can find it in the Internet easily.
Smart Dialer:
not included yet.
Today Screen plugin:
is developing already
Please note: after installation it will do soft-reset immediatelly.
Wow that theme looks good, and the today plug-in looks AMAZING. That's exactly what I've been looking for.. I cant wait until it's released.
I didnt know you guys figured out how to change the incoming caller screen.. maybe we can now finally have that Halo theme microsoft showed off with WM5?
That would be cool
Has anyone installed this theme on a Qtek 9100? Please post
how to customize Incoming Phone...
E-TEN M600 dialer plugin does it. It allows you to use background image in the Incoming Phone popup message. Files: PcvCalertBkP.bmp PcvCalertBkL.bmp are in \Windows directory.
But: becasue hsese files are system's files loaded on startup, you cannot replace these files manually. you have to create certified installer or .cab file and proccess it in this way. This means, we cannot change colors and backgrounds dynamically, without soft-reset.
More: the above plugin define some additional fonts, text and areas, but I have no idea how to change it. If I tried to move the large "Incoming call" text, it was done but I lost CallerID picture in this time. If I tried to move the counter of taliing time more to the left side of screen (now it's on the center), I lost caller's picture too.
...will investigate more.
any way: has anybody any SDK or descriptions how to create/compile such plugin like M600?
Re: installers
JGUI said:
New Phone Dialer:
you have to have the E-TEN M600 skin dialer installed on your device, before you start my replacement. GreenCatapillar will only replace images. I'm sure you can find it in the Internet easily.
Click to expand...
Click to collapse
Hi JGUI, very good work !
But I can't find E-TEN M600 skin dialer in the net...
Could you suggest a link, if you have ?
Thanks :wink:
I just downloaded this theme to my Qtek 9100. Honestly, this is the best looking theme out there. I would still like to have that eten dialer skin. That would truly be the bomb.
Great work JGUI. I'm surprised this post hasn't had more responses.
This skin seems to be perfect, i wish there was a user friendly program out there that could allow people to truely modify a theme like this without having to sit for hours tweaking.
Great work and thank you for your time
Ideed very god job JGUI, it is one of the best skins, i like it a lot
Eten dailer skin link
Here is a link to D/L the dailer skin.
http://pdaphonehome.com/forums/showthread.php?t=71577
any news ?

UPDATE: Treo 700w ROM and REGISTRY dumped!

I was at the local mall today and played with the Verizon Treo 700w. With the integrated data connection, I quickly downloaded Resco Explorer and tried to grab the SpeedDialPlugin.dll from the Windows folder, since that's a neat Today plug-in to assign quick-dial picture contacts as well as have a custom interface for the voicemail box.
Of course, the DLL is in ROM, and Resco Explorer couldn't grab it. Is there any other quick method of getting the file off the device without looking like I'm performing surgery on the device in the store?
I can extract the registry entries with Resco Explorer's Registry Add-In, but how can I get a hold of that and a few other DLL files while on the device itself (not plugging a laptop into it or something)?
Hi BeyondtheTech!
This isn't exactly what you are looking for, since it won't dump individual files, and you need at least a 64 MB SD, but maybe it will be of some use:
http://forum.xda-developers.com/viewtopic.php?t=22861
It works automatically in the background, that's a plus!
BeyondtheTech: grab_it is likely to be exactly what you're after, as Buzz says, it's very 007.
I've tried posting some requests in the Treo Central forums for a copy of the rom, but no one will bother getting it off for me
V
I'm going to try tomorrow at the store with my 1GB card full of distractions.
Qapla'!
I installed Resco Explorer on the demo Treo 700w at the store and it was still there today. I exported the registry out to my SD card.
Looks good. Will have a look into it tonight, with Mrs Vijay555's blessing
V
Wow , great thanks
Yahoooo !!!!
This dump is really good
extracted succefully ..
I wanted to see if I could use the Today plug-ins for the Speed Dial (which has custom buttons for voice mail when called).
I extracted SpeedDialPlugin.dll, SpeedDialDB.dll, DialLookupPlugin.dll, ActiveCallPlugIn.dll, CustomDialingExt.dll, and PhoneCanvasPlugIn.dll, got the Today registry tree, and put it in a CAB file and ran it on my 6700, but none of the Today plug-ins show up.
Am I doing something wrong? Is it missing a certain file?
Just wait ... i've extracted all files and modules and test some of them
Great stuff. Have you tried the phone dialler?
Quite nice and works with the keyboard on the Universal.
V
Can you post what you pulled and put together? I'd like to see what can come out of this whole project.
I haven't had any luck with the today plugins yet, just pulled them out and tried copying the reg like you did, but didn't load. Quickly tried reversing it but it doesn't look like it's crippled to the device, but it probably is. Will check in more detail later.
I just tried all the executables, and some are interesting, but frankly much of it is stock. It's only the battery icon (see here) that was of particular interest.
I tried the phone dialler, but my Universal doesn't have a sim, so it crashed when I tried to call, so can't comment if it works 100%. It looks nice and works well with the keyboard, but is QVGA crippled (well, 240x240!), ie not VGA, although it's all bitmaps so may be hackable like VJBigPhone.
The camera app hung
Haven't done much else yet, Buzz was keeping me busy on other stuff
Will try more later. Thanks so much for posting the ROM btw! I imagine you didn't see the bar on grabit because it may be hardcoded to the bottom of a QVGA screen. We may need to mod the source code.
V
ehm how can i open (and extract the files in) the rom dump (bin file)?
The websearch plugin works. Pretty lame though, only two distinguishing features, but about as basic as it could be. Better free options available on line.
V
Chaps, supposedly the Treo 700W has an answering device application on board including some hooks into the GSM hardware.
Any chance of diving into that?
Chaps, supposedly the Treo 700W has an answering device application on board including some hooks into the GSM hardware.
Any chance of diving into that?
Speed Dialing Today Plugin is working !!!!!!!!!!!!
look at this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
you can test it with this cab ..
Note that you NEED a Nocert rom to install this cab !!
I use it on my Wizard, works great! Thanks TofClock!!!
But please let ne know how do you extracted the rom files from the dump.bin?
Cool...great job. Can you get the today dialer work too please? I'm really interested in that one.

Stand Alone Eten ZoomSMS !! working

i remember someone ask about how to modified ZoomSMS to working alone without scenerios and callfilter and its own missed call history(This apps use missed call history of itself and may intefere with phonealarm).
Concept is :
1.Put phoneservice.exe in Windows\ and put shortcut to startup folder and reset to let it resident in memory.
2.Remove taskbar icon by change this key.
HKLM\ControlPanel\Eten\ScenariosOption\Showicon
Change dword value from 1 to 0
Anyway,u may left it show but when u tap on it,it'll show error about missing something.
3.after 1 and 2 ,SMS-alert part on ZoomSMS is going to work fine but the Missed call alert,when u click on blue Missed call item it'll show error about finding quicklinksetting.exe (This is app. to run its own missed call history).
So u just grab tCallHistory.exe (wrote by someone here,i think) rename it to quicklinksetting.exe and put it in Windows\.Now see it work
use the NEXT VERSION!
screen shots mate?pls
A little trick to install very very quickly....
The little icon in the taskbar remain...however you can tap on it but do nothing!
No bad...
Just download, install and soft-reset!
P.s.
I have also replaced "quicklinksetting.exe" with another (better) one....
This little App simply display (using a beauty icon) on Today the missed calls and the unread SMS.....it alsto open the received sms in a proper magnified windows...
...sorry my bad english but at this moment i'm writing in 3 different language -I hate my university...eheheh...
jaceuk said:
screen shots mate?pls
Click to expand...
Click to collapse
http://www.etencorp.com/products/Communication/software.php?sid=17
this ought to be it, I guess. still, I would have to write on the small small tiny font sms writer, right?
Finally...this is an "EtenPack"...
the only differences is that this cab install the REAL "scenarios" to change the Phone's Profiles.....you can access to this program from the icon in the Today's Taskbar or from an icon in "Programs".....
Using scenarios u can configura 5 profiles!
Screenshot added
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks AX3L for repack and make it better
look this !!!!!
http://forum.xda-developers.com/showthread.php?p=1248944#post1248944
Thanks AX3L
hi there,
do you know what's the shortcut path for Eten's ZoomSMS blue icon?
where does it redirect to?
Excuse me, work on my HTC P3300? Thank you
it works! thanks a lot.
i couldn't use the one made by AX3L as it has speed and response issues with my BA (on WM5, Aku 3.3).
teddyking said:
i remember someone ask about how to modified ZoomSMS to working alone without scenerios and callfilter and its own missed call history(This apps use missed call history of itself and may intefere with phonealarm).
Concept is :
1.Put phoneservice.exe in Windows\ and put shortcut to startup folder and reset to let it resident in memory.
2.Remove taskbar icon by change this key.
HKLM\ControlPanel\Eten\ScenariosOption\Showicon
Change dword value from 1 to 0
Anyway,u may left it show but when u tap on it,it'll show error about missing something.
3.after 1 and 2 ,SMS-alert part on ZoomSMS is going to work fine but the Missed call alert,when u click on blue Missed call item it'll show error about finding quicklinksetting.exe (This is app. to run its own missed call history).
So u just grab tCallHistory.exe (wrote by someone here,i think) rename it to quicklinksetting.exe and put it in Windows\.Now see it work
Click to expand...
Click to collapse
Installed didn't work...
I installed this from here:
http://www.freewarepocketpc.net/ppc-download-zoomsms.html
It works but the icon gets hidden in the photo dialer tab of SPB Mobile Shell. Anyway of getting it out of there? Thanks.
wont work on wm6
i tried to install this program about four times and it still wont work can sumone please help me
glennh627 said:
i tried to install this program about four times and it still wont work can sumone please help me
Click to expand...
Click to collapse
dude...read the 1st post it wont work on wm6
ok so r there any programs that do this on wm6 ?
I'm interested in an app similar to this for WM6, too.
Does anybody can help?
glennh627 said:
ok so r there any programs that do this on wm6 ?
Click to expand...
Click to collapse
Sylvia said:
I'm interested in an app similar to this for WM6, too.
Does anybody can help?
Click to expand...
Click to collapse
The EtenPack works good with the " Artemis Vanilla 1.0 WWE - 5.2.1908 (Build 18505.0.7.0)" but not the stand Alone ZoomSMS
But doesn't work with "Artemis Touch 2.1 WM6 WWE ROM"
Sylvia said:
I'm interested in an app similar to this for WM6, too.
Does anybody can help?
Click to expand...
Click to collapse
Same with me. Does anybody know something like ZoomSMS just for WM6 on AsusP535?
PS: I just installed it on my P535 with WM6 and it works
try this one
i have this one who works good on my hermes try

DIAMOND_DIALPAD_redesign

23\8\2008 Update Call button ( Look Picture 3 )
Hi !
I redesign interface Minimal Dialpad for QVGA only :
* More beautiful interface
* Sharply more cheerful Secondary crop
* More emergent letterpress
* Hope you likes it
(Thanks for DxC's, Minimal dialer ...)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
* Extract Diamond_Dialpad.zip
* install Minimal Dialer Clean
* Copy all files Direct Windows
* Restart Device
* Enjoy
* If want Smart dial to used :
- Download Smart dial Attach file
- Extract
- Use Taskmanager close CPROG.EXE
- Copy Etphone.dll direct to Windows
just tested it,working great,thx for sharing
LANDSCAPE..............
can you please fix the graphics on the landscape too ...
thanks in advance
i am attaching all the original minimal dialer graphics for the dialer that live in the windows folder
so you may use as a template to fix please
i tweaked the protrait a little as i like white pad that shows good in sun light
i will also attach the graphics from manilla dialer, that also have a white diamond pad that is fixed for landscape
i am not using it because the buttoms are smaller & it also freezes my phone
but maybe you can use these graphics as a templae & move them/resize to come up with your diamond pad (DCX format) that works in landscape too
Thanks. Nice one. Please make an update for the landscape.
looks very nice, can't wait to try it.
cheers
Great upgrade from dxc looks much cleaner and well done! Great job buddy
ahmedfikry said:
can you please fix the graphics on the landscape too ...
thanks in advance
i am attaching all the original minimal dialer graphics for the dialer that live in the windows folder
so you may use as a template to fix please
i tweaked the protrait a little as i like white pad that shows good in sun light
i will also attach the graphics from manilla dialer, that also have a white diamond pad that is fixed for landscape
i am not using it because the buttoms are smaller & it also freezes my phone
but maybe you can use these graphics as a templae & move them/resize to come up with your diamond pad (DCX format) that works in landscape too
Click to expand...
Click to collapse
Thanks for shared but image its not work because each dialpad has a en suite pressing touch coordinate. This coordinate is set up in *.dll file. But I will essay to make landscape mode for Diamond_Dialpad_redesign
ancola66 said:
Thanks for shared but image its not work because each dialpad has a en suite pressing touch coordinate. This coordinate is set up in *.dll file. But I will essay to make landscape mode for Diamond_Dialpad_redesign
Click to expand...
Click to collapse
thank you
is it possible to have your new one with landscape in a another version with white layout as well
white is much easier to see at day light
i am sure some users will like black & others may like white..so your dialer will satisfy all tastes if you make both
Thanks
does this support smartdial and does it have that bug where you cant use last redial
as those were the only reasons preventing me from upgrading to any dialer
how about adding the video dial?
nice dialer, i guess landscape doesnt really matter to me though..as I rarely use the phone to dial in landscape anyways..
I installed it on my Polaris (HTC Touch Cruise). looks great, very happy about it ... the only thig that still does not work is redial .. afer I call or get called by someone I can not recall that person just by pressing the "CALL" button. I have to go to call history.
nice one..
redial feature mentioned by banica.alex would be nice
Hi!
I have a white miraculous new design, but there a impediments : How set persimmon letterpress at presents is secondary crop is black its tense is alba emergent . Anybody can help me ?Thanks
Hi All, after i open file from /windows, my dialer always showing like this:
Any one help me to fix it?
hi need help closing cprog.exe it wont let me close it??
boyet804 said:
hi need help closing cprog.exe it wont let me close it??
Click to expand...
Click to collapse
I try it using SK Tool, choose menu "CPU usage" then find "cprog.exe" on list, choose it and click menu "Tools">Goto Processes.
Marked cprog.exe and Click menu "Action">Kill maerked.
http://forum.xda-developers.com/showthread.php?t=275936
tried no luck
just installed and must say i like it alot
Can it be used on the vga screen of the HTC Diamond??? Thanks

Categories

Resources