I was at the local mall today and played with the Verizon Treo 700w. With the integrated data connection, I quickly downloaded Resco Explorer and tried to grab the SpeedDialPlugin.dll from the Windows folder, since that's a neat Today plug-in to assign quick-dial picture contacts as well as have a custom interface for the voicemail box.
Of course, the DLL is in ROM, and Resco Explorer couldn't grab it. Is there any other quick method of getting the file off the device without looking like I'm performing surgery on the device in the store?
I can extract the registry entries with Resco Explorer's Registry Add-In, but how can I get a hold of that and a few other DLL files while on the device itself (not plugging a laptop into it or something)?
Hi BeyondtheTech!
This isn't exactly what you are looking for, since it won't dump individual files, and you need at least a 64 MB SD, but maybe it will be of some use:
http://forum.xda-developers.com/viewtopic.php?t=22861
It works automatically in the background, that's a plus!
BeyondtheTech: grab_it is likely to be exactly what you're after, as Buzz says, it's very 007.
I've tried posting some requests in the Treo Central forums for a copy of the rom, but no one will bother getting it off for me
V
I'm going to try tomorrow at the store with my 1GB card full of distractions.
Qapla'!
I installed Resco Explorer on the demo Treo 700w at the store and it was still there today. I exported the registry out to my SD card.
Looks good. Will have a look into it tonight, with Mrs Vijay555's blessing
V
Wow , great thanks
Yahoooo !!!!
This dump is really good
extracted succefully ..
I wanted to see if I could use the Today plug-ins for the Speed Dial (which has custom buttons for voice mail when called).
I extracted SpeedDialPlugin.dll, SpeedDialDB.dll, DialLookupPlugin.dll, ActiveCallPlugIn.dll, CustomDialingExt.dll, and PhoneCanvasPlugIn.dll, got the Today registry tree, and put it in a CAB file and ran it on my 6700, but none of the Today plug-ins show up.
Am I doing something wrong? Is it missing a certain file?
Just wait ... i've extracted all files and modules and test some of them
Great stuff. Have you tried the phone dialler?
Quite nice and works with the keyboard on the Universal.
V
Can you post what you pulled and put together? I'd like to see what can come out of this whole project.
I haven't had any luck with the today plugins yet, just pulled them out and tried copying the reg like you did, but didn't load. Quickly tried reversing it but it doesn't look like it's crippled to the device, but it probably is. Will check in more detail later.
I just tried all the executables, and some are interesting, but frankly much of it is stock. It's only the battery icon (see here) that was of particular interest.
I tried the phone dialler, but my Universal doesn't have a sim, so it crashed when I tried to call, so can't comment if it works 100%. It looks nice and works well with the keyboard, but is QVGA crippled (well, 240x240!), ie not VGA, although it's all bitmaps so may be hackable like VJBigPhone.
The camera app hung
Haven't done much else yet, Buzz was keeping me busy on other stuff
Will try more later. Thanks so much for posting the ROM btw! I imagine you didn't see the bar on grabit because it may be hardcoded to the bottom of a QVGA screen. We may need to mod the source code.
V
ehm how can i open (and extract the files in) the rom dump (bin file)?
The websearch plugin works. Pretty lame though, only two distinguishing features, but about as basic as it could be. Better free options available on line.
V
Chaps, supposedly the Treo 700W has an answering device application on board including some hooks into the GSM hardware.
Any chance of diving into that?
Chaps, supposedly the Treo 700W has an answering device application on board including some hooks into the GSM hardware.
Any chance of diving into that?
Speed Dialing Today Plugin is working !!!!!!!!!!!!
look at this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
you can test it with this cab ..
Note that you NEED a Nocert rom to install this cab !!
I use it on my Wizard, works great! Thanks TofClock!!!
But please let ne know how do you extracted the rom files from the dump.bin?
Cool...great job. Can you get the today dialer work too please? I'm really interested in that one.
Related
Just wondering if there is a very basic phone pad skin available for the M3100...
Just a single line for the number, maybe 2 if the number is too long so the digits don't get too small...
Large buttons for numbers, no video buttons etc just numbers, no need for the TALK/END sort of stuff as the hardware green/red buttons work fine..
Just looking for something that people with wide fingers can use without a stylus....
If there isn't one, what do I need to do to create one ??
Searched the forum but can't really find anything of use on the subject.
Many thanks Phil
I found that the vista theme on Paulya.com worked wonders for this:
http://www.paulya.com/etenskins.htm
http://www.paulya.com/Projects/Eten_Skins/Vista/Vista_Trans/Vista_Trans_Origin.zip
I am tempted to go back to this dialer as it was so good on my Wizard - just lacks a video button.
Hi, Thanks for that.... Managed to get the skin to work that is included with the eten dialer... I also downloaded the eten_ans etc .zip and put it in the windows dir on the phone after extracting it.. can't seem to find how to enable it (am I thick or something... Don't answer that !!)
The only thing I didn't do was use active sync... I copied the extracted file to my memory card then copied them over from that as the PC I'm at, at the moment doesn't run activesync 4 or higher (horrible win98 se machine..
Any comments much appreciated
Phil
I jast ran the cab file from my storage card and it installed perfectly. I did have diffulculty installing additional skins though.
Hi Phil,
There is a CAB on the FTP here which gives you the phonepad software EXACTLY like in older HTC phones: ftp://xda:[email protected]/Hermes/Tools_and_Programs/Phone Pad - English Only.CAB
I installed it and it's great!
Gavin.
GavinN said:
Hi Phil,
There is a CAB on the FTP here which gives you the phonepad software EXACTLY like in older HTC phones: ftp://xda:[email protected]/Hermes/Tools_and_Programs/Phone Pad - English Only.CAB
I installed it and it's great!
Gavin.
Click to expand...
Click to collapse
Great - Any chance of a screenshot?
Have you guys seen Buzz's Virgy DeepOcean Dialer for WM5 QVGA?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://buzzdev.net/component/option,com_remository/func,fileinfo/id,335/
V
Hi sorry to be thick
ok i downloaded the buzzdev.net qvga dialer
but how does one install it. Do i just run the cab via activesync or run it on the vario2 or what sorry about the stupid questions
also i download the splash screen stuff from there too how do i make that appear instead of the default tmobile one when starting up
thanks
JEREMY
Just stick it onto your device, tap it to load it, install and then when prompted reboot (just hit OK and it'll do it) - the PIN entry screen remains the same, but the main dialer screen changes.
It looks very nice, and I'd use it all the time - except there's no way to use the T9 dialing feature which the regular dialer offers (where you can just type the name of the person you wish to call and it shows all valid entries from the list, so e.g. if I wanted to call my Mum - whose entry is Mum, ironically - I'd type 6-8-6 and then hit Dial). It's quite sad to see that this feature is missing, probably for a good reason as it does cause a fair bit of slowdown on my phone - more than on my old Alpine! - but I still use it all the time and I'm going to have to uninstall the skin because I really neeeeeeeeed that feature. :/
ok if I wanted to get the original tmobile dialer back then all I would have to do is uninstall it then? cool
how would I install the splash screen then?
Jeremy
Vijay55,
I installed it OK, the large buttons are awesome, however I have had the following problems:
1) DTMF (Tones) don't work properley when accessing voice mail etc (UK T-mobile) or any other press x application
2) Jog Dialer not active
3) No Smart dialling
Am I doing anything wrong?
Have had to pull it off becasue of the DTMF problem, I've installed it, removed it, rebooted, changed the options etc, nothing seems to fix it.
Fixed it!!
Though I am now using the Eten dialler with smart dial support and one of Paulya's Dark Blue Glass skins.
Editing the registry and setting the value to 0, then soft reboot and dtmf tones are working.
Setting it to 0 wasn't the obvious choice, and previously I hadn't soft rebooted.
Found the following from dhushy in:
http://forum.xda-developers.com/showthread.php?t=276700
Worked it out. For anyone with a similar problem, use the registry editor to locate the following key:
HKLM,"Drivers\BuiltIn\RIL","EnableDTMFSupport",0x0 0010001,1
Change the value from 1 to a 0 and Bob's yer Uncle (for non-British readers that means everything will be cushty - see Only Fools and Horses for a contextual translation)
Did this and I was able to manipulate my voicemail messages as normal.
Click to expand...
Click to collapse
I am on T-Mobile UK.
Hi everyone,
I wanted to share something back with the community, so here's a new "skin" for JPLDialer_VistaII by JPL4.
I've created images to overwrite the default images in the JPLDialer_VistaII installation to get a working version of my mock-up below. I'm doing it this way since I don't know of another way to do it, but I'm all ears if there is a better way?
NOW COMPLETE: See below for link to files.
Best Regards,
d38
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i like it.... very very nice and clean looking
Really like the JPLDialer_VistaII on PaulyA.com, but I wasn't thrilled about the grass image as it didn't fit right with the PocketCM contacts list I like so much, so, I designed a graphic "skin" to overwrite all of the graphics installed with JPLDialer_VistaII. Pauly A did all the work on the dialer, this is just cosmetic. All of the graphics are included.
1.) First install the "JPLDialer_VistaII by JPL4": http://www.paulya.com/dialerskins.htm
2.) Send the zip file below to your phone and unzip all of the images into your Windows directory (overwriting the files already there, I've named then the same). (Alternate to browse to the Windows directory on your phone when connected to your pc and overwrite the images that way instead).
3.) Do a soft reset. Ready to roll!
I hope you like it.
d38 Replacement Images for JPLDialer_VistaII: d38Rep_JPLDialer_VistaII.zip
Portrait Views
Landscape Views
that is really nice, great work man, i use http://www.paulya.com/dialerskins.htm this website every now and then to get skins from plus they are all free.....
I hope Paulya doesn't mind but I put the bitmaps together into a new JPLDialer cab to make the install easier. The dialer and the bitmaps are excellent.
EDIT: Couldn't attach so I linked it.
JPL Touch Dialer
nice i like that a lot more than the grass, thanks.
redial issue
if i open up the dial pad, and a number is at the top, if i hit the talk button or the hard button to dial from the phone, the phone will not dial the number. I am forced to hit call history then press dial from that menu. Any idea how to fix this issue. I am using a Mogul. Any help would be great
The redial and 911 functions do not work with this dialer. Can someone double check this? I am using a Sprint Mogul.
As in I can't dial 911??? Some one really should look into that.
P.S. Love the look of this dialer. But I suppose 911 should be an option!
Yeah, when you dial 911, the dialer freezes...which is kind of a really bad thing!!
Been a while since I've been able to check back here.
No 9-11 dialing? What? I just tried it on my 8525 (Windows Mobile 5) and it went right through. Not sure why it wouldn't work for you? I know this dialer doesn't use the smart dialer, but I didn't like that in the first place, I doubt that would be the issue for you?
R0N1N, VERY cool, thanks for doing that! I would like to know how that works... Any chance you could share a quick how to? Or a link for more info? Thanks regardless!
I'm going to make a new variation on this one, more of a black based theme, less blue this time. After using this for a while, I've noticed that I would rather see more variation in the button on / off states, especially outside on a sunny day. I'll post it here when it's complete!
Thanks for the feedback! As far as I'm concerned, all props go to PaulyA, but I do appreciate it!
love this skin TY!
Is it possible to use a flash file as a Today Screen plugin?
I would like to develop a highly interactive/visually appealing today plugin in flash, but not sure what program I could make it run in (RLToday/WAD/etc).
Any thoughts would be good. A video example of a similar "look" I am thinking about can be found here: http://www.youtube.com/watch?v=h3BeSG-aKLo
looks like "Itask" that i found last weeks on wisbar-site
in Skin-section, is it ?
http://www.lakeridgesoftware.com/forum/showthread.php?t=11402&highlight=itask
If you can develop a flashplugin like this or similar, be my guest and please try
Yes, that is a video of iTask in action.
Yea, it's iTask. Nice look to it, however, I'm not going for the iPhone feel. The other thing I don't care for is that it is a separate program. That's why I wondered if there is a today plugin that supports Flash. I'll keep searching...
I made a few tests with Pocket Theme Manager 2.
it creates a htm and uses your swf file and ataches them to a .tsk theme file.
All files are stored in \windows with the "a2tk" filenames.
Unfortunelly you have limits to the size and background of the html.
try my theme:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
you need to install first:
flash player 6/7: http://www.adobe.com/products/flashplayer_pocketpc/
Pocket Theme Manager 2: http://handheld.softpedia.com/get/Skins/Pocket-Theme-Manager-19326.shtml
my theme: http://rapidshare.com/files/3759884/TW.tsk.html
you have in this theme a clock, a drawing pad and a small calculator. you also have a animated 3d logo and a small picture (unfortunelly mine, hehehe) it was suposed to be changed to a dinamic png loaded from "my documents". All these are draggable so you can place them wherever you want on the limited screen, have fun...
Still waiting to anyone to create a nice flash today plugin, imagine all the nice gadgets you can have there...
So...who now has most experience in Flash ?
flashtheme maker
if you are looking for some flashtheme expert? please check here. try to PM Deltaflyer.
http://forum.mypdacafe.com/viewtopi...ostorder=asc&highlight=today+themes&start=150
actually, my problem is that there is no good flash today plugin to start with...
I can make flash do a lot, see here:
http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&loc=en_us&extid=1022966
I made a small alternative menu/OS in flash for my old N-Gage...
But WM just doesnt have a good flash player
Why does it need to be a today plugin? eg Slither's cube launcher.
actually that not a today plugin, its wisbar desktop which you can run in top of today screen. made by rhov23
http://www.lakeridgesoftware.com/forum/showthread.php?t=11402&highlight=itask
flash can be used on today with activetoday AND macromedia flash installed.
just make html with swf...set that html in activetoday and it should work..
a flash today plugin is a today plugin that displays swf files...
or, even simpler, a today plugin that displays a html file that calls a swf. in this case all you will loose is part of the background image from the tsk file (as said above).
but the best and fastest way would be to just have the swf file read on the plugin, without the html file.
imagine your today plugin with a image gallery like in this page:
http://twolf.planetaclix.pt/ogamico/
where you can stock, drag, amplify or diminish the photos.
You would have flash gadgets on your today screen...
you want me to imagine it on 320x240 qvga screen LOL??
yeah, done.
sorry, omaps and probably qualcomms are lame with swfs... only thing i need is xscale CPU goddamn...
btw, really, try activetoday with matched swf to realize what potential it has(you need macromedia flash 7 - no mf7 no go...but it is quite ok, in general). just make empty html with swf inside..
Just posted a message to the developer of RLToday to see if he would include SWF support. I believe he is worried it would make the program too fat - but it's worth a try. Some of the other progs I have looked into don't really give us the coding ability like a RLToday.
Another interesting program would be to get our hands on Flash Home by Adobe. Says they only provide it to OEM developers, but wow - that could really open up the development.
Flash OS
I don't know if any of you have seen this, but it's a flash OS. it's still in the early stages but does give me some ideas on making wm6 somewhat pretty.
http://www.whoneedsaniphone.com/blog.asp
Is there anyone that can make a Dialpad that takes up more of the screen, Im looking for something along the lines of the example of the picture on the right.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
----
The att one on the left is the current one I have which is the closest thing but very hard to use while driving and running around, which I got from PhilD41
I just changed the all the buttons to invert when they are pressed down where his only inverted the number and you couldn't see it under your finger while pressing it. If someone can just create one I can skin it myself, I just need a base to put them on. Thanks.
If anyone wants mine Ive attached it, to install just extract to windows directory.ONLY IF YOU HAVE HTC DAILER
you can try DXC's iphone dialpad, any style that's doesn't have a .5 at the end.
http://forum.xda-developers.com/showthread.php?t=380466
i just made this skin for dxc's dialpad, as you can see its fullscreen
http://forum.xda-developers.com/showthread.php?t=394518
Some time ago I made a small flash app that was fullscreen:
(It has severall skins)
Its not great, but it works...
You can get it here:
http://twolf.sytes.net
Under the area MOBILE/FLASHKALL
How do i use this flash dialpad? i have wm2003 and macromedia flash 7 installed but when i dial a number nothing happens...
Sorry, works fine here...
You just need flash 7, dial a number and press the green button...
oh, the EXE exports the data to the storage card, so I guess you need one too...
But i can make a version that exports to a automatic temp folder managed by you system.
hm... i have a storage card and in the temp folder are the files.
I use a german rom wm2003 rom for my magician. There is probably a difference between the folder names: the storage card is called Speicherkarte for example.
Too bad that it isnt working for me
A while ago I made a dialer that is full screen. It has no functionality other than dialing, and only works when installed to main memory...
http://forum.xda-developers.com/showthread.php?t=389951
l3v5y said:
A while ago I made a dialer that is full screen. It has no functionality other than dialing, and only works when installed to main memory...
http://forum.xda-developers.com/showthread.php?t=389951
Click to expand...
Click to collapse
Works like a charm, if you need graphics let me know...
lamandrion said:
hm... i have a storage card and in the temp folder are the files.
I use a german rom wm2003 rom for my magician. There is probably a difference between the folder names: the storage card is called Speicherkarte for example.
Too bad that it isnt working for me
Click to expand...
Click to collapse
I made a new version, please try it now.
many thanks! it´s working now!
twolf said:
Works like a charm, if you need graphics let me know...
I made a new version, please try it now.
Click to expand...
Click to collapse
If you feel like doing some graphics, I think there was a post in that thread... I stopped doing any development on it because no one seemed interested...
l3v5y said:
If you feel like doing some graphics, I think there was a post in that thread... I stopped doing any development on it because no one seemed interested...
Click to expand...
Click to collapse
Will do.
I know what you mean, if no one gives feedback we loose interest...
If anyone's interested: http://forum.xda-developers.com/showthread.php?p=2230491
Hi!
I'm a longtime lurker, ever since I got my Touch HD when it first came out and I NEEDED to have an english rom instead of a dutch one. Thanks to this place, my phone runs exactly how I want it to (most of the time ).
Except for a decent app launcher. I HATE the win6/6.1 scrollist ones, allthough the startmenu after that sucked a little less. I liked the yotacenter launcher, but in the end I just ran out of space and had to hit the "all apps" button too often and scroll through a huge list.
So I wrote my own in c# under .net 3.5.
And, seeing as I got all my tweaks and fixes from you guys, I thought I should give something back; in essence a quick and dirty app launcher which does exactly what I want: organise the programs I use the most.
It's a catagory per page, has menu, contextmenu and top-scroll-bar driven UI and you can add your own background:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I wrote it to be as device independant as I knew how, but I've really only tested it on my Touch HD1, so I'm really curious as to how it runs "in the wild" (or even on any other HD ). To save some effort, I've just packaged the .exe, which should run from any location. If it doesn't, \Program Files\AppGrouper\ should do it.
It should come with a default background and an icon...for this initial release [call it a beta] I didn't create a cab, so you'll have to copy/edit an existing .lnk file to get the program to show up in the windows\startmenu\ .lnk files so you can use a launcher to launch my launcher (yeah, I get the irony ), or just start the app from the exe.
Anyway, as I said this is the first application I'm releasing to the public, so please give me some feedback I have no idea what "unknown unknowns" this app'll run into on different machines than my emulator and my own Touch HD. The only deletion the program can do is to a specifically named .xml file it generates itself, so it should be safe enough
PS: as I was entering the tags to this post, I realised that this type of software could have been made and released many times: I've only used MS's launcher and the yotacenter one, so any ideas and/or other similarities to other launchers is coincidence and a case of simultanious devellopment (or in my case, retarded devellopment ). Again, any feedback is appreciated, from bugs to implementation to "you've totally ripped off x!". 'Cause I didn't, but I'd like to know about x
Anyway, I hope someone can use this!
Nice apps. The Title Folder box ought be longer to fit the text
Hehe
Ok, so I guess I'll have to set up an auto resize routine for the textsize and the textbox ... check back in a day or two
BTW, what device did you use this on? I'm curious to know if the program works correctly on devices other than touch hd's, too.
MacDegger said:
Hehe
Ok, so I guess I'll have to set up an auto resize routine for the textsize and the textbox ... check back in a day or two
BTW, what device did you use this on? I'm curious to know if the program works correctly on devices other than touch hd's, too.
Click to expand...
Click to collapse
I use on Topaz, see my sig
Thanks
Thanks for sharing!
I think mortbutton can do better than this
Ok app. thanks for sharing
By default can you pick up start menu and folder under it as group?
Else I think mortbutton can do far better job than your program. + .netcf 3.5 requirment
Thanks for sharing it. Few things I noticed
while trying to add an to a folder a drop down menu reveal 3 options - the first one is to add an app, what is the second one? it is blank on my tp2?
after running an app it stays in memory. is this how you designed it? i would prefer if it closed after running an app
finally, can you list here launchers that you came across that are standalone apps, meaning they do not sit in memory or eat CPU. i am looking for something like that with folders/tabs like yours and self-close after use.
thanks for sharing. i have one single question. i have installed it on my herald, but i cannot add more then one app to a group. am i missing something?
Sweet launcher! Thank U
I like your application!
As being an anti manila user Until now I was addicted to Program Finder plugin (attached) running on the Today Screen. Unfortunately the Today Screen does not have the SIP toggle in the bottom bar plus sometimes the Today Screen needs a refresh, due to Program Finder being an very old program; its messing up the Today Screen.
Therefore I searched the whole internet and finally after searching for 1 year I found [attachment]ToggleInputPanel.exe[attachment]. I'm executing programs via icons by running Easy Today Launcher.
Your application is a welcome alternative, thanx again! o/~