After I installed the Tcpmp on my dopod838pro, when I run the application > screen go wrong but after put the stylus on the screen(anywhere)all picture come out normally... I heard that somebody said: we have to use the right version of Tcpmp for the right chip set on our PPC. So,Anyone can direct me to Which version of Tcpmp I choose use to matching my Dopod838pro? Thanks for help!!
You need to set the Option->Video to GDI instead of the default ATI one. That should work fine.
Tcpmp 0.66 for the quality
Tcpmp 0.66
to set the Option->Video to GDI and ->Audio to Low
for the quality
Related
I've a HTC Universal :idea: since a week,...my first pda was a 9090, now with WM5 wich is the best video player? and which version shoud I download to obtain the maximum from my device?
Andrea
I'm using the latest TCPMP version and it plays Videos very fine. Just make sure to try the different video drivers within TCPMP to see which one perfoms better for your needs. You may test the performance with the "benchmark" command in TCPMP.
For me, the "raw framebuffer" seems to be the best one (benchmark is about 200%). The default "DirectDraw" setting is a bit slower (~150%) on my JasJar.
.ox
Which version 0.71 or 0.72? which file should I install???
Thanks a lot :lol:
Andrea
Tcpmp 0.66
to set the Option->Video to GDI and ->Audio to Low
for the quality work fine...............
The last version of TCPMP also works fine if you choose raw framebuffer. No need to tweak any of the other settings.
I've been lurking on the CorePlayer forums, and apparently they're waiting to hear back from ATi on this issue... I'm keeping my eyes peeled.
I've heard that there's a new version of core player. it's 1.04
anyone tried or got info if it's tytn friendly now?
br
ok... never mind. I came back home and check coreplayer forums - many improvements, but still NO support for ATI chipset in tytn... crap.
You can lock or trash this pointless topic now mods... cheers
And what about Pause/Play issue?
Does this version fix freezes after Pause?
Coreplayer 1.1 is supposed to have the Tytn support...
Can anyone confirm this?
Later, Lew
On my spvm3100, once you open it and close...than I can't restart it but if I make a Soft Reset...did someone have the same problem?
I have installed it on microSD.
asci said:
On my spvm3100, once you open it and close...than I can't restart it but if I make a Soft Reset...did someone have the same problem?
I have installed it on microSD.
Click to expand...
Click to collapse
i dont have this problem.
do you have any trouble watching movies?
It isn't still supported yet and don't know in wich version it will supported.
They asked ATI info about the chip and guess they haven't get enough info from them to resolve it.
If they ever will resolve the problem!
I use coreplayer with raw frame buffer settings and then it work for 50%.
Also i'm still waiting for a full working coreplayer.
I'm using version 1.04 with RAW FrameBuffer, and on newest WM5 (south africa ROM) it works good. No scattered music when you pause and play again. Seems to work good, but still no Imageon support
on my hermes it s work when i use spb DVD to convert my avi files or dvd...
but always when video is not on "ati" but rawbuffer
I am using Dopod U1000 and the coreplayer 1.04 is worst
on ATI Chips. Wind EFFECT on the screen and only 50% speed on 640x480 DivX movide
See this thread. Coreplayer works perfectly on ATI imageon now for me (using WMXL v0.20.1)
hello to all.
i have a problem with tcpmp on my p3600.
all movies and clipps that i am playing starts with voice but after 2 sec it mutes and i have only video.
what is the problem ?
in the jasjar thers no problame.
its a p3600 problem
same problem with all news htc...
****!
is incredible...
I've had issues, but not the one stated... Mine plays the sound fine, but has tonnes of error blocks in the picture. I'm using the same encoder (Pocket Divx) and TCPMP version I used on my Magician (correct me if I'm wrong, but I couldn't find a newer version of TCPMP)... Any suggestions on what to change would be gratefully received...
Mental said:
I've had issues, but not the one stated... Mine plays the sound fine, but has tonnes of error blocks in the picture. I'm using the same encoder (Pocket Divx) and TCPMP version I used on my Magician (correct me if I'm wrong, but I couldn't find a newer version of TCPMP)... Any suggestions on what to change would be gratefully received...
Click to expand...
Click to collapse
As stated a zillion times in this forum: switch to raw mode ( i dunno if it helps cause i dont use that app... but that is what they say)
I also can't get TCPMP to work.
I get a severe stuttering screen then it goes black. When I touch the screen it then switches to full screen mode and then plays with a slight stutter.
However the clip repeats itself and I can't quit out of the program, my only option is to press the reset buton.
I'm using TCPMP and after changing to raw have had no issues.
Well, I wouldn't say "no issues". Rawframe buffer is probably the slowest displaying method.
I tend to use DirectDraw, but under DirectDraw preferences, change output to YV12 (it defaults to RGB I believe). Everything then plays fine. It's not as fast as hardware accelerated video (ATI Imageon), but until Coreplayer/TCPMP provides proper support for Imageon, DD will have to do.
RayEarth said:
Well, I wouldn't say "no issues". Rawframe buffer is probably the slowest displaying method.
I tend to use DirectDraw, but under DirectDraw preferences, change output to YV12 (it defaults to RGB I believe). Everything then plays fine. It's not as fast as hardware accelerated video (ATI Imageon), but until Coreplayer/TCPMP provides proper support for Imageon, DD will have to do.
Click to expand...
Click to collapse
Hey, thanks for that tip. I think it does work better in DirectDraw .
directdraw
This may be a stupid question but I don't have an option for directdraw. My only options are
ATI IMAGEON
Raw frameBuffer
GDI
Null Video
Disabled
Where can I find Directdraw?
Thanks
rudeboyxv6600 said:
This may be a stupid question but I don't have an option for directdraw. My only options are
ATI IMAGEON
Raw frameBuffer
GDI
Null Video
Disabled
Where can I find Directdraw?
Thanks
Click to expand...
Click to collapse
Hmm, that's strange under Options/Video I get ATI IMAGEON Decoder and DirectDraw also. What version are you using?
hello, i have try this PATCH ATIFix.cab, and tcpmp work very good....in my htc p3600 , you can found the patch, in ftp xda.
I have tcpmp ver 0.72rc1 on a xv6600
rekelem said:
hello, i have try this PATCH ATIFix.cab, and tcpmp work very good....in my htc p3600 , you can found the patch, in ftp xda.
Click to expand...
Click to collapse
I can't find it, do you have a link?
ok, i have found the link for the patch
http://forum.xda-developers.com/showthread.php?t=297717
=)
bye
rekelem said:
ok, i have found the link for the patch
http://forum.xda-developers.com/showthread.php?t=297717
=)
bye
Click to expand...
Click to collapse
Thank you...digesting that thread .
RAW Mode
I have installed the fixed, but my video has still blocked in it.
I read that I have to put TCPMP into RAW mode but how can I do that?
I can not find this option
Many thanx
jjplayground said:
I have installed the fixed, but my video has still blocked in it.
I read that I have to put TCPMP into RAW mode but how can I do that?
I can not find this option
Many thanx
Click to expand...
Click to collapse
Go to Options:Video and you will see the choice.
This fix worked for me on an Orange M700 (HTC3600). Select the ATI IMAGEON option, not the ATI IMAGEON Decoder.
I also have the Smooth Zoom (only 50%) option and Dither checked.
Thanx, it works oke now...
Now I am searching for dutch spoken movies... anyone?
I have a SPV M700 and I have same problem with TCPMP audio stopping after 2-3 seconds no matter how I configure it. There is another alternative to TCPMP as good as it?
One curios thing I observed is that when I flashed a fresh new WM6 and installed first the TCPMP only I had no problem with it but after i added all the rest of software this problem start to appear.
Another thing I observed if i switch to full screen and back sometimes randomly this problem dissapear.
Hi guys!
I have recently tried getting TCPMP to work on TP2. Without any luck.
Firstly there seemed to be a problem with it running on WinMo 6.1. That has however been fixed in a thead somewhere here on xda dev.
I have tried all three of these fixes, and while they managed to get TCPMP open after install (Not get the crash.txt msg), it caused the TP2 to crash when opening a video file (even when trying to run the video that comes with the phone (my documents -> movies)).
Anyone know of any other solutions? because i have been searching but havent found anything to get this working.
Cheers!
same problem to me, I can't even play the video recorded with my TP2. It just hang.
its special TCPMP thats, working here. I have this functional, if you want to post it, just let mi know.
JF
Make it so, please.
Why don't you use Coreplayer for playing movie clips?
I'm having not issues playing most types of movie file... Great player!
Probably because Coreplayer is not freeware.
TCPMP is the predecessor of Coreplayer
its here: http://www.digitwins.com/download/TCPMP-0.72RC1.zip
JF
No luck yet
Thanks for the link, but is this version working on yours? At least I was able to open a video file (mp4) without my TP2 crashing like it did with other recomps I've tried, but the image is all messed up with green lines and **** all over the place...
Sorry, Im not using TCPMP for viewing pics. Didnt noticed that. And Im not gonna use it fot it ;-)
JF
Hi there... i'm having problems to get work on tp2 a player that supports subtitles. Do you know anyone? Thank you very much.
Regards.
Coreplayer dont use in touch pro 2
Coreplayer dont use with processor touch pro 2. In the web of Coreplayer it ist possible reed.
Thank you and sorry for me english
I just use this app now works like a charm.
http://divx-player-mobile.en.softonic.com/pocketpc
It is not possible for me :
- Core player can't start, I don't see the app after pressing the icon
- TCPMP-0.72RC1 open, but the videos are not working, it crashes
Is it a problem of 3D driver or somethong like that?
Well I too am using Coreplayer and it works just fine. v1.3.2 build 6909 for ARM. Plays VGA .avi files perectly...
Had the same problem with TCPMP crashing until I unchecked "DirectDraw" in Video Settings (i.e. use GDI or Raw Frame Buffer).
twana, that is brilliant, I'd given up on TCMP having tried every version I could find.
Did you find out how to fix the blacked-out buttons in the toolbar?
Black buttons are caused by the theme you're using. And yes even HTC standard theme is causing this
Hello!
Thank you Twana, TCPMP works fine for me when I put "GDI" in the video settings!
It is great.
cheetahx said:
its here: http://www.digitwins.com/download/TCPMP-0.72RC1.zip
JF
Click to expand...
Click to collapse
Thanks a lot.
Now my babies can watch toons on my rhodium!
bye
coreplayer/tcpmp
Selecting gdi/rawframe buffer in video settings is a must. Also check tools -> preferences -> file associations if you want them to play aac mp4 etc it must be checked there.