Database Users

Video Problems on TyTn

ive been having troubles with videos (*.avi, *.mp4 etc)) stuttering very badly while using TCPMP , but MP4 files work fine with windows media player, but i would much rather use TCPMP for playing movies.
i contacted htc and they werent any help.
any ideas on how to fix it?

From within TCPMP, check Options>Video and make sure Raw FrameBuffer is checked.

brettatk said:
From within TCPMP, check Options>Video and make sure Raw FrameBuffer is checked.
Click to expand...
Click to collapse
I've tried this config in tcpmp 0.71 and many others configs without succeed.
I use pocket divx ( www.divx.com) with Pocket DivXEncoder on the pc and works great!!

Im guessing you are running an early ROM?!?
Can you post your ROM version and date for us??
to find your rom version:
start
settings
system(tab)
device information

hi im running ROM version 1.18.255.3 with a date of 7/22/06
i tried checking Raw FrameBuffer but it made the picture go very...erratic, i would have to soft reset the phone just to be able to use it.
as for pocket divx, i personally dont like that program, and having to re-encode everything to divx would be a pain.

tcpmp problems

hello to all.
i have a problem with tcpmp on my p3600.
all movies and clipps that i am playing starts with voice but after 2 sec it mutes and i have only video.
what is the problem ?
in the jasjar thers no problame.

its a p3600 problem

same problem with all news htc...
****!
is incredible...

I've had issues, but not the one stated... Mine plays the sound fine, but has tonnes of error blocks in the picture. I'm using the same encoder (Pocket Divx) and TCPMP version I used on my Magician (correct me if I'm wrong, but I couldn't find a newer version of TCPMP)... Any suggestions on what to change would be gratefully received...

Mental said:
I've had issues, but not the one stated... Mine plays the sound fine, but has tonnes of error blocks in the picture. I'm using the same encoder (Pocket Divx) and TCPMP version I used on my Magician (correct me if I'm wrong, but I couldn't find a newer version of TCPMP)... Any suggestions on what to change would be gratefully received...
Click to expand...
Click to collapse
As stated a zillion times in this forum: switch to raw mode ( i dunno if it helps cause i dont use that app... but that is what they say)

I also can't get TCPMP to work.
I get a severe stuttering screen then it goes black. When I touch the screen it then switches to full screen mode and then plays with a slight stutter.
However the clip repeats itself and I can't quit out of the program, my only option is to press the reset buton.

I'm using TCPMP and after changing to raw have had no issues.

Well, I wouldn't say "no issues". Rawframe buffer is probably the slowest displaying method.
I tend to use DirectDraw, but under DirectDraw preferences, change output to YV12 (it defaults to RGB I believe). Everything then plays fine. It's not as fast as hardware accelerated video (ATI Imageon), but until Coreplayer/TCPMP provides proper support for Imageon, DD will have to do.

RayEarth said:
Well, I wouldn't say "no issues". Rawframe buffer is probably the slowest displaying method.
I tend to use DirectDraw, but under DirectDraw preferences, change output to YV12 (it defaults to RGB I believe). Everything then plays fine. It's not as fast as hardware accelerated video (ATI Imageon), but until Coreplayer/TCPMP provides proper support for Imageon, DD will have to do.
Click to expand...
Click to collapse
Hey, thanks for that tip. I think it does work better in DirectDraw .

directdraw
This may be a stupid question but I don't have an option for directdraw. My only options are
ATI IMAGEON
Raw frameBuffer
GDI
Null Video
Disabled
Where can I find Directdraw?
Thanks

rudeboyxv6600 said:
This may be a stupid question but I don't have an option for directdraw. My only options are
ATI IMAGEON
Raw frameBuffer
GDI
Null Video
Disabled
Where can I find Directdraw?
Thanks
Click to expand...
Click to collapse
Hmm, that's strange under Options/Video I get ATI IMAGEON Decoder and DirectDraw also. What version are you using?

hello, i have try this PATCH ATIFix.cab, and tcpmp work very good....in my htc p3600 , you can found the patch, in ftp xda.

I have tcpmp ver 0.72rc1 on a xv6600

rekelem said:
hello, i have try this PATCH ATIFix.cab, and tcpmp work very good....in my htc p3600 , you can found the patch, in ftp xda.
Click to expand...
Click to collapse
I can't find it, do you have a link?

ok, i have found the link for the patch
http://forum.xda-developers.com/showthread.php?t=297717
=)
bye

rekelem said:
ok, i have found the link for the patch
http://forum.xda-developers.com/showthread.php?t=297717
=)
bye
Click to expand...
Click to collapse
Thank you...digesting that thread .

RAW Mode
I have installed the fixed, but my video has still blocked in it.
I read that I have to put TCPMP into RAW mode but how can I do that?
I can not find this option
Many thanx

jjplayground said:
I have installed the fixed, but my video has still blocked in it.
I read that I have to put TCPMP into RAW mode but how can I do that?
I can not find this option
Many thanx
Click to expand...
Click to collapse
Go to Options:Video and you will see the choice.
This fix worked for me on an Orange M700 (HTC3600). Select the ATI IMAGEON option, not the ATI IMAGEON Decoder.
I also have the Smooth Zoom (only 50%) option and Dither checked.

Thanx, it works oke now...
Now I am searching for dutch spoken movies... anyone?

I have a SPV M700 and I have same problem with TCPMP audio stopping after 2-3 seconds no matter how I configure it. There is another alternative to TCPMP as good as it?
One curios thing I observed is that when I flashed a fresh new WM6 and installed first the TCPMP only I had no problem with it but after i added all the rest of software this problem start to appear.
Another thing I observed if i switch to full screen and back sometimes randomly this problem dissapear.

Full TCPMP v.72 w/ ALL Codecs?

I searched but can't find a 1 .cab install of TCPMP with all the codecs(.wmv, .wma, .flv, etc...). Is there one?

I think you need this one
click

Comments Withdrawn

You guys rock! Thanks!
v.81 plays my 350kbps .wmv files smoothly on my Touch. Smoothly!!! Overclocked to 247 of course...

hi there
is there any plugin that plays rmvb ????
thanks

lord_ice said:
hi there
is there any plugin that plays rmvb ????
thanks
Click to expand...
Click to collapse
Check out the link below it isn't for TCPMP but it is for rmvb play back with WMP:
http://forum.xda-developers.com/showthread.php?t=393680

juiceppc said:
You guys rock! Thanks!
v.81 plays my 350kbps .wmv files smoothly on my Touch. Smoothly!!! Overclocked to 247 of course...
Click to expand...
Click to collapse
Sorry, to ask what i think is a dumb question, but I've been trying to sort out TCPMP all day long and am way too tired now to look through more threads!!!
1. Where do I put the three dll that come in the plugin zip?
2. What's this "Overclocked to 247" mean?
At present, I get sound BUT: a black screen, and refusal to play avi files (coverted by PocketDivXEncoder_0.3.60).
Thanks in advance...
Mattster.

!
exist codec for flash 8 local video??

Mattster_spv said:
Sorry, to ask what i think is a dumb question, but I've been trying to sort out TCPMP all day long and am way too tired now to look through more threads!!!
1. Where do I put the three dll that come in the plugin zip?
2. What's this "Overclocked to 247" mean?
At present, I get sound BUT: a black screen, and refusal to play avi files (coverted by PocketDivXEncoder_0.3.60).
Thanks in advance...
Mattster.
Click to expand...
Click to collapse
1.put The Dll'S in Program Files\Tcmp Folder where Tcmp.exe is
2. Overclocked to 247 mean the cpu is clocked over the default 200mhz speed with omap clock.
Magic Video Converter Is the best converter iv used along with Klite Codecs for xvid

I have the HTC Touch from Sprint and I have the 0.72 version. I uninstall the 0.72 then install the 0.81 cab. When it was done, I tried to run tcpmp and I get a crash.txt error message.
Can anyone help?
Thanks,

cmai said:
I have the HTC Touch from Sprint and I have the 0.72 version. I uninstall the 0.72 then install the 0.81 cab. When it was done, I tried to run tcpmp and I get a crash.txt error message.
Can anyone help?
Thanks,
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=406905

http://forum.xda-developers.com/showthread.php?t=406905
Based on the link, it seems the fix is only for 0.72 and not for the 0.81. Do you all have this issue with the 0.81 version?

anyway to get this support opera 9.5?

zcink said:
Or Maybe this ones:
Click to expand...
Click to collapse
0.81? woww, the las version that I found is .072 RC1, and it's too old.
is there any new page or any dev team developing it??

rofl.
0.81 is not too old.
you just do NOT know its potential.
and forget about that new recompiled thrash posted there somewhere.

im pretty sure hes saying .72 RC1 was too old...

0.81 and 0.72 are almost SAME programs, all you need is good set of codecs + some knowledge -- how to use it.
of course, there may be some problems on some machines, BUT 2/3 of these problems can be solved with prefs combinations.
do not say there is better program than tcpmp.EVER.
..ok just ignore me now, i am worshipper of tcpmp, and NEVER had ANY problems that i cannot solve...
just 3 cents from me.
just cannot stand if someone is saying that tcpmp is "old" = crappy.
it doesn't matter.
good pack = happiness, NOTHIN more.

I've combined the codecs and tcpmp .81 posted by zcink into one .cab
just install this:
http://www.mediafire.com/?sharekey=442c5108678df88f1686155677bb2685a43d88cace4d0fcb
and you've got it
however, I have a previous version cooked into my ROM, and every time I open it, it says "Unexpected program failure. Please send 'crash.txt' to the developers. Program will now exit."
Is this because of the previous cooked-in version, or a different problem?

mbarvian said:
I've combined the codecs and tcpmp .81 posted by zcink into one .cab
just install this:
http://www.mediafire.com/?sharekey=442c5108678df88f1686155677bb2685a43d88cace4d0fcb
and you've got it
Click to expand...
Click to collapse
Ok, I need some help.
So far, whatever type of media player I use, my videos tend to lag and freeze. They only seem to run smoothly when I play them at 80% speed. I would love perfect playback!!! So:
1. I have read that I am best to use a convertor first. I've tried PocketDivXEncoder_0.3.60, but it converts them to _avi's meaning that no player can play them! I just get "unknown file format!". What am I doing wrong?
2. Only ATI IMAGEON Decoder and ATI IMAGEON give me playback (any other video setting on tcpmp gives me a black screen). BUT, it freezes and lags unless I set speed to 80%! I have as yet found no way to get 100% visual and audio playback.
I've read up on so many threads on this, but there seems to be so much differing advice out there.
Thanks in advance to anyone who has advice.
Mattster.
UPDATE: Coreplayer plays files created by PocketDivXEncoderworks which don't for some reason play on TCPMP, so I'll stick with that!

Mattster_spv said:
At present, I get sound BUT: a black screen, and refusal to play avi files (coverted by PocketDivXEncoder_0.3.60).
Thanks in advance...
Mattster.
Click to expand...
Click to collapse
Any update to the black screen? I've installed the files, and I get audio fine, but no video.

TCPMP

Hi guys!
I have recently tried getting TCPMP to work on TP2. Without any luck.
Firstly there seemed to be a problem with it running on WinMo 6.1. That has however been fixed in a thead somewhere here on xda dev.
I have tried all three of these fixes, and while they managed to get TCPMP open after install (Not get the crash.txt msg), it caused the TP2 to crash when opening a video file (even when trying to run the video that comes with the phone (my documents -> movies)).
Anyone know of any other solutions? because i have been searching but havent found anything to get this working.
Cheers!

same problem to me, I can't even play the video recorded with my TP2. It just hang.

its special TCPMP thats, working here. I have this functional, if you want to post it, just let mi know.
JF

Make it so, please.

Why don't you use Coreplayer for playing movie clips?
I'm having not issues playing most types of movie file... Great player!

Probably because Coreplayer is not freeware.
TCPMP is the predecessor of Coreplayer

its here: http://www.digitwins.com/download/TCPMP-0.72RC1.zip
JF

No luck yet
Thanks for the link, but is this version working on yours? At least I was able to open a video file (mp4) without my TP2 crashing like it did with other recomps I've tried, but the image is all messed up with green lines and **** all over the place...

Sorry, Im not using TCPMP for viewing pics. Didnt noticed that. And Im not gonna use it fot it ;-)
JF

Hi there... i'm having problems to get work on tp2 a player that supports subtitles. Do you know anyone? Thank you very much.
Regards.

Coreplayer dont use in touch pro 2
Coreplayer dont use with processor touch pro 2. In the web of Coreplayer it ist possible reed.
Thank you and sorry for me english

I just use this app now works like a charm.
http://divx-player-mobile.en.softonic.com/pocketpc

It is not possible for me :
- Core player can't start, I don't see the app after pressing the icon
- TCPMP-0.72RC1 open, but the videos are not working, it crashes
Is it a problem of 3D driver or somethong like that?

Well I too am using Coreplayer and it works just fine. v1.3.2 build 6909 for ARM. Plays VGA .avi files perectly...

Had the same problem with TCPMP crashing until I unchecked "DirectDraw" in Video Settings (i.e. use GDI or Raw Frame Buffer).

twana, that is brilliant, I'd given up on TCMP having tried every version I could find.
Did you find out how to fix the blacked-out buttons in the toolbar?

Black buttons are caused by the theme you're using. And yes even HTC standard theme is causing this

Hello!
Thank you Twana, TCPMP works fine for me when I put "GDI" in the video settings!
It is great.

cheetahx said:
its here: http://www.digitwins.com/download/TCPMP-0.72RC1.zip
JF
Click to expand...
Click to collapse
Thanks a lot.
Now my babies can watch toons on my rhodium!
bye

coreplayer/tcpmp
Selecting gdi/rawframe buffer in video settings is a must. Also check tools -> preferences -> file associations if you want them to play aac mp4 etc it must be checked there.

Coreplayer

Im starting to get the feeling my phone never came with it. I can't find it anywhere.. does anyone know where it should be? Even a directory location would be helpful but i've searched the phone from top to bottom looking for it

coreplayer is not included software for htc hd2 (as far as i know)

Its not included, you can get it from http://coreplayer.com/
While I get 158% on benchmark and it plays really smoothly (in the benchmark) it then judders and is useless when not in benchmark mode, so I wouldn't bother with it...

I am having problems installing Coreplayer. Running the purchased pocketpc cab file it tells me my hardware isn't supported. I have been in touch with Coreplayer (who take at least 24 hours to respond) and all they can tell me is I need to use the pocketpc version, this is what I am using. I've paid for this and it won't run on my phone even after factory resetting, I'm getting frustrated now after 3 days of trying.
Has anybody else had problems? Are there any possible solutions such that I can install it?
Any help gratefully received

Ah cheers guys. I hate video reviews that show apps and claim that they come with the phone lol. Yeah i'm not reading great things about it though so I deffo wont be purchasing it.

It's working just fine with me, make sure you set GDI as video output.

Coreplayer works fine on mine... although it doesnt rotate or follow the GUI like it used to on my omnia.
This seems to be a failing throughout the interface... the rotation doesnt follow the device.
Is there any way to fix this
GG

Direct Draw seems better than GDI on mine, wierd

Coreplayer installs and works fine, however i am unable to enable A2DP functionality with with my headset. It recognises volume control but not pause, Forward or backward.
However i think this is a device issue, as i've tried installing S2P and it does exactly the same thing!
Anyone have any ideas?

I have the feeling that the image quality on HD with QTV enabled on Coreplayer is better when playing the same file on HD2 with GDI or RAW FB.
Anybody can confirm ?

I just found this thread and wanted to thank tnyynt as I had been using Coreplayer with the default DirectDraw setting and the playback wasn't so great but changed to GDI and it surpasses my Archos 5 IMT. Top stuff.

So GDI is better than DirectDraw ? haven't noticed any difference, at least for me. Although GDI takes advantage of hardware acceleration at some points.

In scenes where the camera was panning sideways with Directdraw you could see the image kind of wobble as it redrew the picture from top to bottom but with GDI selected this no longer happens. Much smoother playback of XviD's for me.

Can you guys please post details of the verions of Coreplayer you are using?
I ask I was 'acquired' a copy of v1.3.2 to test and it seemed fine. I then went and purchased a copy (latest - v1.13.6) however on installing this it seems dreadful no matter what settings I used.
Not sure if this is something to do with me uninstalling one version then installing another, or a ROM upgrade etc, however just wanted to check.
Cheers, Simon

CorePlayer v1.3.6 on HD2 only 50% qality rending any video !!!
The video image quality on HD2 with CorePlayer v1.3.6 GDI or RAW is lower with 50% !!! When playing the same file on HD2 with HTCvideoPlayer video image is the best !!!