Database Users

IMATE JASJAR DEAD after ROM UPDATE

Hi all,
I have dead JASJAR dead after ROM UPDATE.
I cannot enter bootloader menu.
Please any help
Thanx in advance
BR
Julian

If you don't mind explaining more detail on the step that you have done on flashing your universal, maybe someone can come up with some help.

bambacik said:
If you don't mind explaining more detail on the step that you have done on flashing your universal, maybe someone can come up with some help.
Click to expand...
Click to collapse
Here is little explanation about upgrade process;
I upload firs and second file and it was 100 % success, but when I upload the third file in the middle something happen and message appears " restart your device" or somethink similar.
After that device dies, I try all combinations for HARD RESET and BOOTLOADER menu but without success.
Please any HELP
BR
Julian

Press camera+power and soft reset and check if it get into bootloader where u serial top.

hdubli said:
Press camera+power and soft reset and check if it get into bootloader where u serial top.
Click to expand...
Click to collapse
not working this combination any other ideas ?
Thanx in advance

Not camera+power+reset, but backlight+power+reset.

bambacik said:
Not camera+power+reset, but backlight+power+reset.
Click to expand...
Click to collapse
Same ... I tryed all the combinations to enter bootloader, but... no success

BatRambo said:
Hi all,
I have dead JASJAR dead after ROM UPDATE.
I cannot enter bootloader menu.
Please any help
Thanx in advance
BR
Julian
Click to expand...
Click to collapse
A) Plug your phone into your computer via USB.
B) Press the Power and the light button, not the camera.
You should see a faint outline that says USB.
It's now recognized in the Device Manager, run your ROM Update and fix it now.

Where is the "light" buttom? Please.

BatRambo said:
Hi all,
I have dead JASJAR dead after ROM UPDATE.
I cannot enter bootloader menu.
Please any help
Thanx in advance
BR
Julian
Click to expand...
Click to collapse
I had the same problem b4:
try this:
1) plug the usb cable in 1st
2) soft reset the imate (the screen should have a very light "USB" word)
3) run the rom update on the PC
4) after completion, hard reset (press the 2 "-" buttons on the imate) and press the soft reset bottun together.
5) when the screen is re-set, press "X" to exit instead of "0" to go to factory default.

still no solution

only jtag solution can turn on the phone
and i think its possible only in service center

How to restore the orginal S200 ROM ?

Hi people,
I have a mayor problem. I just fu*ked up my phone by installing WM6.
Now the screen freezes when the QTEK "Keep the world in one" logo is visible with the OS Version information. Hard reset wont work.
How can I restore the original rom ?
Please help me!

s200 off
and I have this problem. my phone is off by installing new spl
Now the screen freezes when the QTEK "Keep the world in one" logo is visible with the OS Version information. Hard reset wont work.
How can I restore the original rom ?
Please help me

To go in the boot loader screen you have to:
press & hold camera and commmanager button
press the softreset hole
release the commmanager button and keep hold the camera button until the 3 colours display appear
Byez

but wat can i do after i hav the 3 colour screen come out?
pls help..... i'm very nervous..... i don wanna waste my money coz i screw up my phone.,...
i'm now outstation... can go back to the service center within this 6 mth....

Connect USB Cable. Go in the Boot Loader screen (Hold down camera button, power button and soft reset until the 3 colours display appear). Run Rom upgrade Software.

mrsurya2000 said:
Connect USB Cable. Go in the Boot Loader screen (Hold down camera button, power button and soft reset until the 3 colours display appear). Run Rom upgrade Software.
Click to expand...
Click to collapse
Which rom upgrade software ?

de.schurk said:
Which rom upgrade software ?
Click to expand...
Click to collapse
http://www.romupdate.ru/ghjibdrblkz...rophet_220734_2207114_024721_QtekWWE_Ship.exe --> this software
don't worry, your device isn't bricked as long as you can run it in bootloader
check in WIKI if you have G3 or G4 Prophet

I'm the exact same situation.
And wiki didn't help so far...

Take it easy and flash the ROM as described. Use any WM5 ROM compatible with your device, but preferrably one with no vendor ID. In case you cannot update normally use the RUU-No-Vendor-ID application found in the FTP.
As said above the device is not dead, it can be recovered.

namco said:
Take it easy and flash the ROM as described. Use any WM5 ROM compatible with your device, but preferrably one with no vendor ID. In case you cannot update normally use the RUU-No-Vendor-ID application found in the FTP.
As said above the device is not dead, it can be recovered.
Click to expand...
Click to collapse
Bear with me on the dumb questions
It looks like I managed to re-install
Thank you for your help. I installed the rom dezzer advised (post 7 of this thread) and it worked fine. Does that mean tha NOW i can flash smart1 1.3's?

Yep. Turn off the phone, make it sync with activesync and run UPDATE_ROM.bat.
Then cross your fingers Kidding. It will surely work. Remember to hard-reset after the upgrade.
If anything goes wrong just reflash WM5 and hard-reset. Always hard-reset after ANY OS upgrade.

Bricked phone.. Or what?

Hey !
I think i have bricked my Hurricane Device.. I was trying to install WM6 on it, and another WM6 SPL..
When i looked in the topic "WM6 for C550" i grabed the Patched RUU with SPL in it.. I quickly flashed it, but just after i found out that the rom image's name was SP3i ! And this is not the Hurricane, but i Typhoon right?
So now after i flashed this i can only get the device to show me an all white screen.. And when i use the USB Cable, the computer dosn't see it at all!
I try to insert cable press while pressing camera button = White screen
I try camera button + power button = White screen
What can i do? Is the device bricked forever?

Da9L said:
Hey !
I think i have bricked my Hurricane Device.. I was trying to install WM6 on it, and another WM6 SPL..
When i looked in the topic "WM6 for C550" i grabed the Patched RUU with SPL in it.. I quickly flashed it, but just after i found out that the rom image's name was SP3i ! And this is not the Hurricane, but i Typhoon right?
So now after i flashed this i can only get the device to show me an all white screen.. And when i use the USB Cable, the computer dosn't see it at all!
I try to insert cable press while pressing camera button = White screen
I try camera button + power button = White screen
What can i do? Is the device bricked forever?
Click to expand...
Click to collapse
try to flash a compatible rom from sd...

marcosorano said:
try to flash a compatible rom from sd...
Click to expand...
Click to collapse
Can you tell me how i do that ?

No one that can help me ?

I searched in the XDA-Wiki for "SD" and "flash" and found this
http://wiki.xda-developers.com/index.php?auto_redirect=1&pagename=TitleSearch&s=sd+flash

eightball said:
I searched in the XDA-Wiki for "SD" and "flash" and found this
http://wiki.xda-developers.com/index.php?auto_redirect=1&pagename=TitleSearch&s=sd+flash
Click to expand...
Click to collapse
Tried the guide for vox, but still if i insert the sd card with a nbh file it still just gives me the white screen..
Anything else i can do ?

no one want reply me :=(

with big mistake i was flashing my ELF with a wrong rom( svp s650)..
it unbootable I tried everytings hard reset soft reset nothing changes: = (just the green light that stays on ..
help plz and thanks
Reply With Quote

muslim2009 said:
with big mistake i was flashing my ELF with a wrong rom( svp s650)..
it unbootable I tried everytings hard reset soft reset nothing changes: = (just the green light that stays on ..
help plz and thanks
Reply With Quote
Click to expand...
Click to collapse
Hi
Sorry to hear your problem, try to read this guide http://forum.xda-developers.com/showthread.php?t=406721 and the stickies in the Elf Upgrading
Hope you can save your device

i have read it but i dont find the sollution :=(
can you help me plz ????

muslim2009 said:
i have read it but i dont find the sollution :=(
can you help me plz ????
Click to expand...
Click to collapse
Hi
Does it go into bootloader (3 colors )?

no no bootloader...
just the green light that stays on
i was tried bootloader and soft resest and hard reset nothing :=(

nothing again
no no bootloader...
just the green light that stays on
i was tried bootloader and soft resest and hard reset nothing :=(..
if you can give a vedio explean how i can result this problem..
and big thanks from morrocco

muslim2009 said:
no no bootloader...
just the green light that stays on
i was tried bootloader and soft resest and hard reset nothing :=(..
if you can give a vedio explean how i can result this problem..
and big thanks from morrocco
Click to expand...
Click to collapse
Hi muslim2009
I tried a few searches but all the results say you need the bootloader screen , are you sure you didn't miss a step in hard reset or bootloader mode :
To enter the bootloader:
Hold down the camera button and reset device with the stylus. Keep holding the camera button until you see 'tricolor' bootloader screen.
An alternative way to enter bootloader:
Switch the device off by long pressing O/I (power) button. hold down the camera button while pressing the O/I button about 1 second. Keep holding the camera button until you see 'tricolor' bootloader screen.
Alternative(universal?) bootloader(3)
As almost all htc smartphones with onboard camera, when you push and hold the camera(photo) button, and plug in usb adapter. Even a "stupid" usb power adapter will work.
To hard reset:
Hold down send/reject buttons (green/red at the front) and reset with the stylus; release the stylus but keep holding the buttons till you get 'this will erase all your personal data' message, then press 'action' (big front button) to hard reset.
I sincerely hope it helps
I was also born in Morrocco at Casablanca and lived there until age 16. Anyway I'll continue searching.
Tito

thanks for help,but it won't work :=(..
[email protected]
add me if i can show you my htc ..
thanks from morocco

I'm not sure if it's possible with the HTC Touch, but I know when I was playing around with an old iMate SP3i (smartphone) I was able to do a ROM upgrade from files on the memory card.. Took me a few attempts to get it right, but it worked. I think I also upgrade my SP5 to WM6 from WM5 that way, but I'm not too sure about that.
Either way, a basic idea of what I'm talking about can be found here, but that is obviously for a different phone.. Maybe some of the more common members here would have better luck finding a similar process on a Touch....?

maybe its will be workin but what marterial i will need for this opperation??

On some HTC devices (cheetah, for example) if you put the ROM file (.bin) in the root directory of the SD card, the phone will flash directly from the SD card.
I think you do require to put the phone into bootloader for that to work though ... not 100% sure, but probably worth looking up.

Ok... Been trying to search for more information for you, but with not really knowing all the correct terminology it's taken me a while longer than I thought. I've found two threads that have some of the information I was looking for:
Recover / Revive your dead / bricked HTC ELF or ELFIN
Recover HTC Touch from tricolors RUU boot-loader (Mtty)
The second link is actually found inside the 2nd post (I think) of the first thread I mentioned here, looks like they are linked in some way. Your best bet is to read through and see if it is something that may help. Let us know if this works for you...?

thanks you man,i was read the first link befor..i will see for the second
hope will work.thank you again

[Q] dead device

Hi
Plssssss Help me. i'm using HTC touch 3450 and i have upgraded my device with wm6.1
NOW THE PROBLEM IS...
1. MY DEVICE BUTTONS(HARD KEYS) NOT WORKING BUT I CAN MAKE THE DEVICE IN BOOTLOADER (TRICOLOR) MODE BY PRESSING CAMERA + POWER BUTTON.
2. AFTER INSTALLING A ROM WHENEVER MY DEVICE STARTS IT SHOWS THE HARD RESET SCREEN (BLACK SCREEN........... ALL THE DATA ...BLAH BLAB......)
I HAVE TO REMOVE THE BATTERY AND START THE DEVICE AFTER 30 MINS.) PLEASE NEED THE SOLUTION ......
3. I AM TRAYING THIS FOR A MONTH BUT NOTHING HAPPENS
PLZ GUYS HELP MEEEEEEEEEEEE OTHERWISE I'LL BE CRAZY!!!!!

rupesh baviskar said:
Hi
Plssssss Help me. i'm using HTC touch 3450 and i have upgraded my device with wm6.1
NOW THE PROBLEM IS...
1. MY DEVICE BUTTONS(HARD KEYS) NOT WORKING BUT I CAN MAKE THE DEVICE IN BOOTLOADER (TRICOLOR) MODE BY PRESSING CAMERA + POWER BUTTON.
2. AFTER INSTALLING A ROM WHENEVER MY DEVICE STARTS IT SHOWS THE HARD RESET SCREEN (BLACK SCREEN........... ALL THE DATA ...BLAH BLAB......)
I HAVE TO REMOVE THE BATTERY AND START THE DEVICE AFTER 30 MINS.) PLEASE NEED THE SOLUTION ......
3. I AM TRAYING THIS FOR A MONTH BUT NOTHING HAPPENS
PLZ GUYS HELP MEEEEEEEEEEEE OTHERWISE I'LL BE CRAZY!!!!!
Click to expand...
Click to collapse
hi
if u can get ur tricolor screen then try this
connect the usb cable to pc and see if u get the USB words on the phone tricolor screen if so good try flashing any official ROM the same happened to my phone long back did the above got my phone back asuming u have done HSPL for ur phone if u have not done that then the only way is to take it to service
hope it helps good luck
thanks
hari

Wrong forum.. Touch P3450 is not a touch 3g , its the original touch (ELF version)
but i will try and help as i have owned both.
if your hardware buttons are not working it could be possible that your send and end keys are stuck down as this key combo brings up the hard reset you are talking about.
think you are going to have to open it as it sounds like a hardware fault, and if you cannot get into bootloader you cannot flash
if it was working alright before this is not the case, but either way you will have to fix your camera button and get into bootloader