Related
Hi guys,
This is my first post over here >>> Actully i have a problem with the athena i tried to unlouck it using X7500 Unlocker but i faced a really difficult problem. i am getting a black screen only no boot , no hard reset and no USB connection. I tried my best to breing it back up but i couldn't. Plz i need your help to solve this problem.
Thanks in advance,
Waiting ???
omanidev said:
Waiting ???
Click to expand...
Click to collapse
have you tried reading the wiki which has a page on this very topic?
No I haven't >> i9 will try now
I tried all the wiki instruction but actully i am not getting the boot screen at all only black screen no more at all
omanidev said:
I tried all the wiki instruction but actully i am not getting the boot screen at all only black screen no more at all
Click to expand...
Click to collapse
Same happened to one of our units here.
Needed a trip to the service. ALWAYS take out SIM card and miniSD card out when flashing, they're known to cause random f***ups.
jpiskorski said:
Same happened to one of our units here.
Needed a trip to the service. ALWAYS take out SIM card and miniSD card out when flashing, they're known to cause random f***ups.
Click to expand...
Click to collapse
sorry about my english i have the same problem when i press camera key +power +rest i dont have any action and i try the camera +slid volum key down and i try camera + voice key and i try all key but i dont hav any action all this whitout sim and minisd just black sacreen help me plz plz plz
I have interest problem. After step 2 of unlocking i get the black screen. After I have followed of instructions. When I try to flash the ROM, i see: "Error [302]: Update error"
I have no SIM or card inside. I tried with 3 different ROM flash my f***ed device. Nothing helps. May be anyone of u can help me?
Hi there.
Follow the instructions here *word for word*:
http://wiki.xda-developers.com/inde...e Athena Unlocker - the Black Screen of Death
miha_conan said:
I have interest problem. After step 2 of unlocking i get the black screen. After I have followed of instructions. When I try to flash the ROM, i see: "Error [302]: Update error"
I have no SIM or card inside. I tried with 3 different ROM flash my f***ed device. Nothing helps. May be anyone of u can help me?
Click to expand...
Click to collapse
What state is your Athena in ? Bootloader accessible, black screen, what exactly ?
miha_conan said:
I have interest problem. After step 2 of unlocking i get the black screen. After I have followed of instructions. When I try to flash the ROM, i see: "Error [302]: Update error"
I have no SIM or card inside. I tried with 3 different ROM flash my f***ed device. Nothing helps. May be anyone of u can help me?
Click to expand...
Click to collapse
hi
i had similar problem but before any one can help you u have to tell us in what state exactly your device is and try to get it in to bootloader before we can help first thing is you want to check in bootloader is that if your device is hard spl (if yes then you can flash it with any rom)
the eiset way to do it is Rename the .NBH file to ATHEIMG.nbh and copy it to your miniSD card. Press camera+com manager+soft reset to bootloader and wait for reading ATHEIMG.nbh from SD. Remember, the miniSD card must be formatted with a FAT32 filesystem before copying the file ATHEIMG.nbh to your miniSD.
u can use any (athena rom ) as long as it is hard spl other wise if not sure or any doubt use your ship rom (nbh file)
hope this helps
need experts guidence
hi @all
i also got one 7500 for repair, client told me while CID unlocking communications breaks and AMEO is DEAD.
Does not go into BOOT-LOADER mode,
Computer not detects it,
No responce to charger, no ring
Battery is charged with 3.77vDC
Red ring comes for a sec only try to RESET the device with Charger connected
Red ring also visible as long as Battery is not in the Phone and Charger is connected.
IS THERE ANY HOPE TO REVIVE IT
TIA
with Regards
hobbiest_2k3
my Polaris SPL-1.52.0000
when i flash hardspl ,it stops at 0%,and screen of the Polaris remain in bootloader mode(screen in three color) ,and the PolarisUnlocker doesn't works too.
anyone who can tell me why,i'm really appreciate!
Try POWER + CAMERA + SOFTRESET (this enter the bootloader mode) and then install the ROM you like ... you will get no errors !!!
nightfear said:
Try POWER + CAMERA + SOFTRESET (this enter the bootloader mode) and then install the ROM you like ... you will get no errors !!!
Click to expand...
Click to collapse
thx for your answer,the same ,ERROR 262
try replacing the data cable and reinstalling the activesync;
then enter bootloader
see that you get "usb" and then try to upgrade.
first thing i would do is reinstall the activesync (sometimes bad drivers get registered in windows)
cwb1230 said:
when i flash hardspl ,it stops at 0%,and screen of the Polaris remain in bootloader mode(screen in three color)
Click to expand...
Click to collapse
Did you follow instructions and unplugged and then replugged your Polaris when it told you to on the bootscreen?
operating system?
do you use windows XP? if vista you should try on XP..
Remove your SD card before flashing !
Unplug and replug your device when you see 'Replug device'
thanks you !!my computer is xp,i have three data cable,none works!enter bootloader or Remove SD card doesn't works too!
Now i'm try to reinstall my computer system......god bles me!
Hello,
I've got the same problem, different computer, windows xp, sd removed, camera+power+reset the update stay at 0%.
Does someone got another idea ?
Regards
Same for me. No updates can be done....
Indicator stuck on 0% no matter what I'm trying to update.
Any1 pls????
JB
Same thing happens to me. I am stuck on bootloader with official SPL, and i can only flash Official rom, nothing else works. Not even HardSPL. V2.
How can i try to flash HardSPL from SD card ? any instructions ? please ?
goranapo said:
Same thing happens to me. I am stuck on bootloader with official SPL, and i can only flash Official rom, nothing else works. Not even HardSPL. V2.
How can i try to flash HardSPL from SD card ? any instructions ? please ?
Click to expand...
Click to collapse
you should go here to get a tutorial Flashing Via MicroSD Card
Hakim Rahman said:
you should go here to get a tutorial Flashing Via MicroSD Card
Click to expand...
Click to collapse
Thanks but that thread is for HTC LEO, ?!!?
goranapo said:
Thanks but that thread is for HTC LEO, ?!!?
Click to expand...
Click to collapse
Well, this
- Get a MicroSD card that is formatted as Fat32. The card must be formatted as Fat32 otherwise it will not work. It doesn't need to be blank or freshly formatted (but it wont hurt if it is)
- Find the ROM image you would like to use, normally named RUU_Signed.nbh, and rename it to "POLAIMG.nbh". Depending on the source of your ROM file, it may not be named RUU_Signed.nbh, but just rename the nbh file you obtained to POLAIMG.nbh
- Copy the file POLAIMG.nbh to the root of your microSD card
- Plug the card into the phone, then enter boot loader mode by pressing down the Camera button, then using the stylus, press and hold the RESET button at the bottom of the phone. Release both buttons once the bootloader screen appears.
- You will first see a tri-color screen then the information on the card. Press power button to start flashing.
- After all these are done, press the reset button located at the bottom of the phone to reset the device.
Hi,
while updating my ROM of HTC P3400, i have bricked it. Now when i press any button on the phone nothing happens. Only red and green light flashes once and nothing else happens. No bootloader mode (tri color). No battery charging indication nothing. Phone is compeletely dead. I have some ROM images and set of tools (mentioned on this site) available with me. Please help me recovering my cell phone. let me know some links etc or any other means of getting my cell phone back.
I am in need of desperate help.
thanks
Ashish
Dude read properly here. esp from step no.4
if u tried olip's method n ur mobile is not working.this indicates u hav new gene.proceed from step no.4 from here
i am not able to come in Boot loader mode as well. When i press cmaera key with power on key...nothing happens. Battery is also not out. i have tried my phone's battery successfully in frn'z cell.
Power on your device. When the leds blinks hold camera button and reset the device. That way you should go to bootloader mode and flash another rom.
When I have that problem I solve this way.
Thanks a ton man...
i have flashed new rom and it works absolutely fine.
htc gene bricked
guys I have the same problem. My htc gene is bricked.I have tried all the methods. I am unable to recover using Orefkov's method. When I try to press power key or soft reset button , onlr red and green light blinks. Nothing else happens. I am even not getting the tri color screen.please help me.
Not bootloader mode
i pressed camera button+power buttton but nothing happen
plz help me what i do????//
how can i get now booltloader mode
I have the same problem when i enter to bootloader the usb appears on the bottom of screen but i can"t execute the ""mitty.exe""".there is no usb button...
I also stop the webcomm.exe from task manager ;;;; pls hellp meeeeeeeeeee,,,,,
pressed camera button+power buttton but nothing happen
Click to expand...
Click to collapse
Hold the camera button and press the reset button. Read what ramersonw has said.
I also stop the webcomm.exe from task manager
Click to expand...
Click to collapse
Right click on the Activesync icon and deactivate USB Connection. Wait for the device to be recognized, if it is not being recoginized, change the cable.
ALso BRICKED
Very stck, my HTC still well not run all i get is a 3 colour screen red top green mid and blue bottom this being the bootloader screen,
onbl 1.07.0000
spl 1.07.oref
I also get a USB at the lest bottom coner!
I do not know how i can find a rom that is corect for my gene 3400 also if you can pleass let me know were i can find the tool to load the new rom too that would be the best
manyu many thanks guys
Vitor Jose said:
Very stck, my HTC still well not run all i get is a 3 colour screen red top green mid and blue bottom this being the bootloader screen,
onbl 1.07.0000
spl 1.07.oref
I also get a USB at the lest bottom coner!
I do not know how i can find a rom that is corect for my gene 3400 also if you can pleass let me know were i can find the tool to load the new rom too that would be the best
manyu many thanks guys
Click to expand...
Click to collapse
You can install any ROM you feel like, the choice is yours - just make sure that it says that it is for "New Gene"
PPL, I've tried all of it.. hold the camera key and reset/power on etc but my p3400 denies to boot. only answer n disconnect key blinks while trying to reset.
while trying to press the power on key nothing happens,,, no led blinks at all....
pls help...
ramersonw said:
Power on your device. When the leds blinks hold camera button and reset the device. That way you should go to bootloader mode and flash another rom.
When I have that problem I solve this way.
Click to expand...
Click to collapse
Hi,
I m having the same problem. I have tried as per your instruction. I m getting the tricolor screen written ONBL 1.17.000 SPL 1.10.Olip
When I m trying to upload ROM, it is showing : error 300 invalid update tool
Pls help.
my HTC still well not run
Vitor Jose said:
Very stck, my HTC still well not run all i get is a 3 colour screen red top green mid and blue bottom this being the bootloader screen,
onbl 1.07.0000
spl 1.07.oref
I also get a USB at the lest bottom coner!
I do not know how i can find a rom that is corect for my gene 3400 also if you can pleass let me know were i can find the tool to load the new rom too that would be the best
manyu many thanks guys
Click to expand...
Click to collapse
my HTC still well not run all i get is a 3 colour screen red top green mid and blue bottom this being the bootloader screen,
onbl 1.07.0000
spl 1.10.Olip
I also get a USB at the lest bottom coner!
I do not know how i can find a rom that is corect for my gene 3400 also if you can pleass let me know were i can find the tool to load the new rom too that would be the best
manyu many thanks guys
---------- Post added at 01:40 AM ---------- Previous post was at 01:34 AM ----------
[email protected] said:
Hi,
I m having the same problem. I have tried as per your instruction. I m getting the tricolor screen written ONBL 1.17.000 SPL 1.10.Olip
When I m trying to upload ROM, it is showing : error 300 invalid update tool
Pls help.
Click to expand...
Click to collapse
The same
my HTC still well not run
I have tri colours
ONBL 1.07.0000
SPL 1.10.Olip
When I m trying to upload ROM, it is showing : error 300 invalid update tool
Pls help
Thanks
HCT p3400i is dead pls help
my htc p3400i is only blink red and green light pls give the solution pls pls pls bro i need this phone its very urgent do something pls
jamshed said:
my htc p3400i is only blink red and green light pls give the solution pls pls pls bro i need this phone its very urgent do something pls
Click to expand...
Click to collapse
try to flash rom your device ! here tutorial to do it --> http://forum.xda-developers.com/showthread.php?t=472169
Hi,I bought an htc hd2 that show only HTC green logo without red information. The seller told me that He bricked it flashing a rom (that I don't know if it is a wrong rom). What should I do ? Thanks in advance
Try pushing vol up + en power button when the phone is off. What do you get then?
What should I push ? vol up and end call ?
hold vol down, tap and release power.
i cant say for certain whether yours is the same as the situation i had, but my original hd2 wouldnt boot and would only show a white screen with the green HTC and none of the rom/radio info in red in the bottom corner..it ended up being toast and had to be replaced under warrenty. not saying yours is, but thats what happened with mine.
Razorbacktrack5535 said:
Hi,I bought an htc hd2 that show only HTC green logo without red information. The seller told me that He bricked it flashing a rom (that I don't know if it is a wrong rom). What should I do ? Thanks in advance
Click to expand...
Click to collapse
Wrong rom? Probably - wrong radio... Congrats! You bought a nice paperweight.
I had the same a week ago. I had my phone for just 2 hours, then it suddenly stopped working when I restarted it. My HD2 wouldn't boot and did only show the white screen with HTC logo. I tried to do a hard/soft reset, and I even updated the rom, but nothing worked. I't happened because I was removing a app in the Windows Mobile Device centre and it crashed. My phone is now in repair.
Follow the 2nd part of this guide:
http://www.htc.com/europe/howto.aspx?p_id=297&id=182
Had the same prob with op and kept sticking at white logo htc and didn't progress any further. Just do that guide and phone will return back to normal.
Razorbacktrack5535 said:
Hi,I bought an htc hd2 that show only HTC green logo without red information. The seller told me that He bricked it flashing a rom (that I don't know if it is a wrong rom). What should I do ? Thanks in advance
Click to expand...
Click to collapse
Download from HTC site the original ROM from you phone using the serila number under the battery. Unzip it in some directory. Rename the file RUU_signed.nbh to LEOIMG.nbh. Put the SD card from your phone in the computer, format it to FAT32 and copy LEOIMG.nbh file to the rot directory of SD card. Put the card back in phone (phone should be switched off). Then put phone in boot loader: push and hold VOLUME DOWN button and push for short the POWER button, keep holding VOLUME DOWN button until bootloader starts (4 colors screen). Follow the instructions on screen. The phone will be flashed with the original SPL, ROM & Radio from the file LEOIMG.nbh on SD card.
After that it should work normally. After flashing perform hard reset.
Note that battery should be well charged before flashing.
If above does not work your phone probably has hardware defect which could be rectified only in service by changing of some PCB inside. I had similar problem but not related to flashing and service changed power PCB (on warranty).
@AndrewSh
The seller tell me that he flashed a rom from emulr
Razorbacktrack5535 said:
@AndrewSh
The seller tell me that he flashed a rom from emulr
Click to expand...
Click to collapse
You know - English is not my native so can you please be more specific - what do you mean by emulr - emulator or anything else?
Anyway - open the battery rear cover, find the Reset (bottom left), press and hold Volume down and push reset with a stylus or pen or whatever, holding Volume down. It will try to enter to bootloader mode. Do not release Volume down until the three-color picture will appear on screen.
Read what you see and write down here....
Sorry I made an error. I would say emule ,the filesharing program
If you can see the HTC logo your device isn't bricked.
This means that SPL is still alive and working. You only need to enter bootloader mode and flash a FULL RUU.
@kholk
Can you tell me what should I do ? Can you give me the link to the files that I need?
kuwait said:
Download from HTC site the original ROM from you phone using the serila number under the battery. Unzip it in some directory. Rename the file RUU_signed.nbh to LEOIMG.nbh. Put the SD card from your phone in the computer, format it to FAT32 and copy LEOIMG.nbh file to the rot directory of SD card. Put the card back in phone (phone should be switched off). Then put phone in boot loader: push and hold VOLUME DOWN button and push for short the POWER button, keep holding VOLUME DOWN button until bootloader starts (4 colors screen). Follow the instructions on screen. The phone will be flashed with the original SPL, ROM & Radio from the file LEOIMG.nbh on SD card.
After that it should work normally. After flashing perform hard reset.
Note that battery should be well charged before flashing.
If above does not work your phone probably has hardware defect which could be rectified only in service by changing of some PCB inside. I had similar problem but not related to flashing and service changed power PCB (on warranty).
Click to expand...
Click to collapse
Did u even tried that? I am 99% sure that that will work!
Razorbacktrack5535 said:
@kholk
Can you tell me what should I do ? Can you give me the link to the files that I need?
Click to expand...
Click to collapse
I told you what to do and what to write here afterward. Then we will see what to do after you read your current SPL info....
Hi,
I tried to power on the phone after some days and it didn't show nothing,black screen.I opened It and the "power keyboard" was broken in two parts (the connector and the keyboard).So I bought a new one and The phone doesn't want to show something.What should I do ? Please,Please help me :'(
Up :'( Please help me
Little Up :'(
Razorbacktrack5535 said:
Hi,
I tried to power on the phone after some days and it didn't show nothing,black screen.I opened It and the "power keyboard" was broken in two parts (the connector and the keyboard).So I bought a new one and The phone doesn't want to show something.What should I do ? Please,Please help me :'(
Click to expand...
Click to collapse
When I first started reading posts in this thread i thought you had some hope, but now, your device is officially bricked
Send it in for repair, even without warranty . You have to, unless you know how to fix it. Sorry
hi,
my HD mini got problems with the "sleep of death" I tried some some things and after I formatet the SD card, I thought my SOD was gone.
But tomorrow my device wath off, so I tried to put it on. it vibrates, the HTC logo appaeres (only HTC, no quietly brilliant) than the screen freezes for about 10 seconds and the deviece shut down. I made a few hard resets, but everytime the HD mini wants to restart its the same.
I hope anyone knows about that problem.
Daphoz
Daphoz said:
hi,
my HD mini got problems with the "sleep of death" I tried some some things and after I formatet the SD card, I thought my SOD was gone.
But tomorrow my device wath off, so I tried to put it on. it vibrates, the HTC logo appaeres (only HTC, no quietly brilliant) than the screen freezes for about 10 seconds and the deviece shut down. I made a few hard resets, but everytime the HD mini wants to restart its the same.
I hope anyone knows about that problem.
Daphoz
Click to expand...
Click to collapse
try to remove the SD card and restart the phone
tzacapaca said:
try to remove the SD card and restart the phone
Click to expand...
Click to collapse
I did that already, I also tried it without simcard. unfortunately without succes.
Daphoz said:
I did that already, I also tried it without simcard. unfortunately without succes.
Click to expand...
Click to collapse
Sounds to me like you need to reflash a stock rom.
when powering on hold vol up to enter bootloader then flash official rom.
bruce2728 said:
Sounds to me like you need to reflash a stock rom.
when powering on hold vol up to enter bootloader then flash official rom.
Click to expand...
Click to collapse
first question: where do i get the official rom, or is it left an the device?
second question: when i press vol up and power nothing happens, so I thought try the other direction (vol down and power) so I get red,green,blue and white beam.
at the red beam:
PB92100
SPL-1.31.0000
ENGID 0xF
PCBID 0x80
at the green beam:
MicroP(LED) 0x05
TP SYNAPTICS
at the blue is nothing
at the white:
serial
I can´t do anything on this screen.
yep its vol down for bootloader sorry
you can get official roms from shipped-roms.com
once you have downloaded to your pc unzip the exe with winrar and extract ruu_signd.nbh and flash usin dft_sspl_mini which can be found with a quick search of the forum
hope this helps
try to search the dev forum on the rom, flashing using sd card. it might help. been there done that...
http://forum.xda-developers.com/showthread.php?t=1041988
OK, thanks for all your help.
As I posted in another thread, I started my HD mini is ok, since wednesday evening. I can´t say how I solved the problems, I made a few hardresets and suddenly it works fine. Now I test some things step by step to look whether I can find the reason. At the moment I guess it´s something with the sd card...
If I will find something I will tell you, perhaps its helpfull.
http://forum.xda-developers.com/showthread.php?t=1092430
I have the same problem, but I don't know how to solve it!
I have the same problem, because I wanted install android to device, but after I install recovery the phone didn't boot up! :/
Pls help me!!
Erkaft95 said:
I have the same problem, because I wanted install android to device, but after I install recovery the phone didn't boot up! :/
Pls help me!!
Click to expand...
Click to collapse
I thought that I answered you in your Thread.