Hi guys
I have a small problem in that when i use the phone as a modem via bluetooth, after about 5 mins it just hangs (according to my laptop im still connected), so i have to disconnect and connect and works for another 5 mins.
It doesn't happen with usb connection only with bluetooth.
any ideas?
bashi007 said:
I have a small problem in that when i use the phone as a modem via bluetooth, after about 5 mins it just hangs (according to my laptop im still connected), so i have to disconnect and connect and works for another 5 mins.
It doesn't happen with usb connection only with bluetooth.
Click to expand...
Click to collapse
i've noticed similar problem two days ago, acutally it wasn't 'hanging', but bluetooth in Vario II just.. turned off by itself. it happened twice, but i didn't have time to investigate it further more.
I just configured my 2day old TyTN for dial up networking via Bluetooth. I've been surfing and checking email (Edge no HSPDA here) for 1hr and 17 min's without a hang up. Running at about 50k per dsl reports.com . It loads pages about twice as fast as my k jam and has not felt warm at all. As I recall the k jam heated up with that much use.
Related
Hi to all , i'm a new user of TYTN .
I always use it as a modem to surf the web via BT in conjunction with my laptop.
My question is : there is a way to defaul the wireless modem to BT ( it default to usb ) when start the program and ( maybe ) the program starts automatically without select MENU>START....
ALSO : i saw that the internal modem work also when the device is into sleep mode and without starting the wireless modem but in this case the connection hang after few minutes ( i think the BT connection to the PC hang ).
If the device is in active state the internal modem work too and fine but if no data is exchanged for a while the device goes to sleep without advice then connection hang.
No problem using the wireless modem .
Again ... there is a way to add the internet sharing via PAN BT like hermes' brothers ( P3600) ???
thx in advance
Greeting from Italy
Davide
I'm having the same problem, also in Italy on TIM. I have tried two different SIM cards, different data plans, and can not find any pattern to the disonnects. If the connection sits idle, it will suddenly stop passing traffic. I have at times been able to keep the connection active by running a game (WoW) in the background on my laptop, but as soon as I the game quits due to timeout (not playing), the connection gets "stale" and dies. Other times, the game will not keep the connection active either. The time it stays active is inconsistent as well. Sometimes when I connect, I get no received packets, only sent. If I disconnect/reconnect 4 or 5 times, usually I will get a good connect and be able to open a web page. I do find it is worse in the daytime than in the evenings, but this is not always true.
BTW, I'm on a TyTn, MacBook Pro w/ the modem script linked from the wiki.
Any ideas?
@ jcolley :
i don't know about macbook , but a problem like your appear on micro$oft XP with the built in bluetooth stack .... much more better use the widcomm stack or toshiba stack for bluetooth
vdavide said:
Again ... there is a way to add the internet sharing via PAN BT like hermes' brothers ( P3600) ???
Click to expand...
Click to collapse
Nope, as there still isn't an AKU3 ROM for the TyTN.
As far as disconnection problems are concerned, try using a desktop-based ping utility to keep up the connection.
Menneisyys said:
Nope, as there still isn't an AKU3 ROM for the TyTN.
As far as disconnection problems are concerned, try using a desktop-based ping utility to keep up the connection.
Click to expand...
Click to collapse
OK , but i mean if there is an apps to do this .
BTW does AKU 3.3 support more than 1 pc connected to inte rnet trought PAN BT ?
thx.
Vdavide
Hi
Is anyone experiencing the following problem on T mobile UK or any other network? [t mobile touch plus]
Using your handset as a modem 'internet sharing' the handset will intermittently stop charging for 15 minutes, after using the connection ‘internet sharing for anything up to 30 minutes (connected to a desktop pc or laptop)
Secondly when the phone reaches 100% fully charged using the internet sharing, the handset stop charging and subsequently the phone switches to battery power and as a result you are working against the standby time, which when empty in let say just over an hour you will have to charge the phone again, before you can resume using internet sharing.
Radio version of handset is 1.58.21.24 it’s
The page results from surfing is fine on desktop and handset just the above problem and heating.
Any thoughts would be much appreciated
yes i get that isssue to on my niki on tmobile uk but its only just started doing it recently
try to soft reset it
All my devices, Qtek S100, Qtek S200, HTC Touch dual - they all stops charging in "Internet Sharing" mode.
internet sharing and charging..... the fix
does your handset stop charging then restarts after a little while using internet sharing, if so read below
a few things to check is to try internet connection on another laptop at the location where it is happening,if the fault is present then you have identified the fault is with the handset or network.
your next step is to try internet sharing at a different location from where you are experiencing the fault and see if the fault reoccurs, for me it wasn't until i decided to try internet sharing in another area that i discovered that the fault was network related, even though tmobile were adamant it wasn't (this fault is also related to cases where the handset gets very hot within a short of time whilst using hspda/gprs).
if the above test is carrried out and you identify that it's location based then speak to tmobile (but be persistant)
today my handset can sit idle or surfing for xyz and it is barely warm....
hopes it help
With internet sharing, my Kaiser used connect to the internet (T-Mobile mobile broadband) without problems fro the past year. Now since I got the HD, my internet connection is inconsistent. Sometimes it tries to load pages for ages, then timeouts, and sometimes it works like a charm. I don't think it's because of the signal, because network coverage seems fine (nearly always at 4 bars with HSDPA).
Has anybody been experiencing something similar ? Don't really think it's a problem related to USB because when my internet connection doesn't work when connected via USB, I sometimes switch to bluetooth, and that seems to work for a while, then it fails again.
I also tried it on a PC with XP, and had similar problems. Any ideas ?
Thanks
sbirsen said:
With internet sharing, my Kaiser used connect to the internet (T-Mobile mobile broadband) without problems fro the past year. Now since I got the HD, my internet connection is inconsistent. Sometimes it tries to load pages for ages, then timeouts, and sometimes it works like a charm. I don't think it's because of the signal, because network coverage seems fine (nearly always at 4 bars with HSDPA).
Has anybody been experiencing something similar ? Don't really think it's a problem related to USB because when my internet connection doesn't work when connected via USB, I sometimes switch to bluetooth, and that seems to work for a while, then it fails again.
I also tried it on a PC with XP, and had similar problems. Any ideas ?
Thanks
Click to expand...
Click to collapse
Hey there,
I'm experiencing the exact same problem with my Touch Diamond ...
My internet sharing via usb has been working fine for months now until this this week. Now, since monday, connection times out, loads half a page, etc. i.e. exact same symptoms as yours.
Internet sharing via bluetooth works fine.
Need help PLEASE!!!
Cheers
[email protected] G
It lasted for a few days and since last week it's working brilliantly as it should. Maybe it was just a network issue ? Did you manage to get your connection to work again ?
I also think it's network related ...
It was working fine again for one day, then it just started acting up again.
I now use the bluetooth connection instead of USB. Seems to be much more reliable and for some reason I'm getting better speeds than via USB.
I always thought USB wud be much quicker.
If only our ISP can get their damn act together.
Thanx for the feedback ..
Cheers
Has anyone found a solution to this problem? I'm having the same exact issue with my Raphael.
Hey... my Problem is the Internet, Data Connection to works fine very fast.... but the Internet Sharing with computer doesnt work anymore since Yesterday... but i dont know why... i flash new ROM and Radio Yesterday soo maybe thats why...
I flash Duttys V2.1 and the 1.12.25.16 radio....
Is it at all possible to use internet sharing and activesync or use the phone as a modem while using active sync?
O and O said:
Is it at all possible to use internet sharing and activesync or use the phone as a modem while using active sync?
Click to expand...
Click to collapse
So far i know active Sync Closing if you use it as Modem...
So no Sync and modem at all? That sucks, worked great for ym old Nokia.
I have noticed the following problem:
When I use my HD as a modem it functions properly for about the first 15 minutes, then HSDPA icon disappear and remain fixed only 3G icon and the connection becomes very slow.
Similarly this happens even if I use my HD with built in opera browser; besides in this manner I notice that the memory usage increases: even if I stop the internet connection and I delete cache the memory usage remain high and it is necessary to perform a soft reset to fix it.
I've tried with another sim card and GSM operator; with HSDPA and HSUPA enabled and supported by the operator, but I've experienced the same problems.
If I use my old USB or express card wireless modems I have no problems and the connection is always very fast
A ROM upgrade by HTC to solve once and for all this problem will be appreciated !!!
I use a laptop to connect wirelessly to a modem but my brother connects to the modem through an ethernet cable (for his laptop). Whenever I'm connected to the internet alone, it works fine. But, once my brother turns on the computer and connects to the internet, the connection crashes. It takes roughly 3 minutes to fix itself, but it crashes a few minutes later. If one person turns off the computer, the internet connection becomes stable again.
This problem started about two days ago, but the modem has been there for a few years, the laptops are not recently bought, so there really were no changes that I know of that could have affected the modem to crash like that.
This problem gets really annoying and any help would be great. Thanks
I ve got a plc adapter of d-link(DHP-P306 ).Ι had a successful internet connection in three different rooms.Suddenly.i lost connection and since then I am randomly connected,except for the pc that is in the same room with the router.I ve set up the adapters through a process that i found in various websites(pushed the safety button to synchronize adapters).But still i ve got problem( Huston)!! Is there any hint?
any thoughts?
Hi buddy
Actually I had a similar problem, and then I noticed that the PLC from D-Link have a power saver mode that, if you don't use it for a certain amount of time (mine is 5 minutes) it will cut the internet connection. For me, 5 minutes is the most moronic thing they could have done, so whenever I don't use the internet for 5 minutes, it closes the connection, even if I'm logged in my PS3 session, it just stop working. I have noticed that this is in various d-link models, maybe that's the same issue with yours?
mauchito said:
Hi buddy
Actually I had a similar problem, and then I noticed that the PLC from D-Link have a power saver mode that, if you don't use it for a certain amount of time (mine is 5 minutes) it will cut the internet connection. For me, 5 minutes is the most moronic thing they could have done, so whenever I don't use the internet for 5 minutes, it closes the connection, even if I'm logged in my PS3 session, it just stop working. I have noticed that this is in various d-link models, maybe that's the same issue with yours?
Click to expand...
Click to collapse
is it feasible to deactivate this option?i don know if thats the same problem because so far i had no disconnections.. :/
ask5868 said:
is it feasible to deactivate this option?i don know if thats the same problem because so far i had no disconnections.. :/
Click to expand...
Click to collapse
what is more..i turn on my computer that is connected to a plc adapter.i have an internet connection.if another computer,that is in another room,turns on then i lose my connection.its like the other pc "steals" my connection's power.
another incident,if i remove the laptop's plug and i use only the battery then i can be connected.like there is not enough power for energy and sign transmission simultaneously.
any idea for causes and solutions??
some idea?