Hi to all , i'm a new user of TYTN .
I always use it as a modem to surf the web via BT in conjunction with my laptop.
My question is : there is a way to defaul the wireless modem to BT ( it default to usb ) when start the program and ( maybe ) the program starts automatically without select MENU>START....
ALSO : i saw that the internal modem work also when the device is into sleep mode and without starting the wireless modem but in this case the connection hang after few minutes ( i think the BT connection to the PC hang ).
If the device is in active state the internal modem work too and fine but if no data is exchanged for a while the device goes to sleep without advice then connection hang.
No problem using the wireless modem .
Again ... there is a way to add the internet sharing via PAN BT like hermes' brothers ( P3600) ???
thx in advance
Greeting from Italy
Davide
I'm having the same problem, also in Italy on TIM. I have tried two different SIM cards, different data plans, and can not find any pattern to the disonnects. If the connection sits idle, it will suddenly stop passing traffic. I have at times been able to keep the connection active by running a game (WoW) in the background on my laptop, but as soon as I the game quits due to timeout (not playing), the connection gets "stale" and dies. Other times, the game will not keep the connection active either. The time it stays active is inconsistent as well. Sometimes when I connect, I get no received packets, only sent. If I disconnect/reconnect 4 or 5 times, usually I will get a good connect and be able to open a web page. I do find it is worse in the daytime than in the evenings, but this is not always true.
BTW, I'm on a TyTn, MacBook Pro w/ the modem script linked from the wiki.
Any ideas?
@ jcolley :
i don't know about macbook , but a problem like your appear on micro$oft XP with the built in bluetooth stack .... much more better use the widcomm stack or toshiba stack for bluetooth
vdavide said:
Again ... there is a way to add the internet sharing via PAN BT like hermes' brothers ( P3600) ???
Click to expand...
Click to collapse
Nope, as there still isn't an AKU3 ROM for the TyTN.
As far as disconnection problems are concerned, try using a desktop-based ping utility to keep up the connection.
Menneisyys said:
Nope, as there still isn't an AKU3 ROM for the TyTN.
As far as disconnection problems are concerned, try using a desktop-based ping utility to keep up the connection.
Click to expand...
Click to collapse
OK , but i mean if there is an apps to do this .
BTW does AKU 3.3 support more than 1 pc connected to inte rnet trought PAN BT ?
thx.
Vdavide
Related
Hi all!
I have installed the WidComm stack, but since then I cannot use my i-mate as a GPRS Dial-Up Modem. When I select Dial-Up from the Bluetooth devices, after some seconds it pops up a window where I can enter my username, password and the number to be dialed. But when I press Dial, nothing more happens, just a window pops up saying "Dialing *99#..." but then I get an error message "Error 692: There was a hardware failure in the modem...".
I tried it with and without Hardware flow control etc., with and without AT command +cdgcont=1,"IP","internet",0,0 still no success.
On the other hand my old MS Stack lost its SSA profile somehow, so I cannot connect through that one either anymore.
Since noone is saying anything about this issue, I assume everybody is happy and has it working, am I right? :wink:
Any ideas? :?: Please help, I need it badly... :?
Kristof
I have the exact same problem. Have you found the solution?
I think it's caused by the widcomm stack that was extracted from a non phone-edition ppc (which of course cannot be used as a modem). maybe the extracted stack from a hp 6300 works?
Funny thing is I also can't connect via IR.
l did a hard reset & voila, I can use my xda2 as a wireless bluetooth gprs modem again.
Putra,
really ? after a new format u were able to connect using GPRS and USB without any problems ?
I' have the same problem with my i-mate k-jam latest WWE rom...
Error 692: There was a hardware failure in the modem !!!
And the connection were dropped down...
Maybe could be the SPB GPRS Monitor program ?
I've disabled all possible thing related to ActiveSync and Usb connection , either on pc and my k-jam....
I'm goin' to be crazy !!!
Only one time i was able to connect for up to 2 minute, without any problems... and then, after i've tried again to estabilish a new connection, i won't be able... it sais Error 892.... !!!
Anyone Could Help me ?
Thanks a lot in advance...
Raid.
sorry...
Sorry there, but it was so long ago, I cannot even remember what I did.
I have upgraded to the Prophet since Jan, and no longer using the Xda2... it's now my backup in case something happens to my Prophet.
The Bluetooth connection works fine... but sometimes the modem still "hang" and i got Error 692 or TCP Error 743... it seems that the major problems are caused by the ActiveSync, when i disable the USB connection either on my phone and on my laptop everything goes fine...
With the USB connection....no way at all ! After 2 minutes the connection is terminated.... even if i've disabled ActiveSync USB connection...
Hope this helps....
Alessio.
Nothing to do....
Also using BT stack (Microsoft) after few minutes my wireless modem seems still connected, but i cannot send/receive packets over the internet.
It seems like frozen !!!
And after i've clicked the "Disconnect" through the dialup connection icon on my task bar, my wireless modem doesn't respond anymore... i need to reset my device and sometimes this doesn't works at all, Windows stop responding while i'm trying to open the "Network Connections" panel... after the timeout completed and the dialup is disconnected i can open it again !
What's the problem !?
I'm downloading the new Dell BT stack for my laptop... i'll update you again...
I cannot figure the problem is my device... i can surf with opera beta for WM5 without any problems !!!
I solved the problem....
I've upgraded my MS BT stack with the Dell BT stack new update (Latitude D410).
Everything seems working fine now, i can stay connected above 15 minutes now... in this moment i'm writing throught my EDGE connection
I cannot use the USB modem... after 2 minutes i cannot send/receive packets anymore... i've disabled ActiveSync either on phone and laptop !
Some one could help with the USB and my Wizard?
Thanks.
A.
Hey Guys,
I'm new to the PPC,where i just bought a K-Jam and installed activesync 4.1 on my laptop (winxp sp2).
i have also a bluetooth dongle (MSI) and it seems to be working fine with me, i can connect my kjam to the laptop to syncronize my data.
now when it comes to using the internet via my laptop, i'm lost
i've been reading all threats which confused me when setting up the connection and i'm still not able to work it.
please if anyone can help me step by step , i'll be thankfull
thanx in advance.
I have noted by Bluetooth experiences with connecting my Xda Exec to my Home PC internet connection. It took me over a weeks worth of shouting & frustration to get this working as I ended up falling down every pitfall you could fall down! :evil:
Anyway, take a look here:
http://www.xda-developers.com/viewtopic.php?=42488
GL
Andy
all you need to do is discover your device and connect to the dial-up networking connection.....
once that's done it's just a matter of getting the correct phone number, username and password (if applicable).
In the US for T-Mobile the phone number is *99# and there is no user name or password.
dear underwurld
thinks for your fast response and for trying to help, not sure if the link is working at the moment , i've tried to open it several times.
lvlolvlo,
i donot think it can be that easy, i came across alot of threats were all about the activesync and ports and network connections , what made it more complicated.
any help..?
Oops sorry about that....
Missed a bloody 't' out try again:
http://forum.xda-developers.com/viewtopic.php?t=42488
@lvlolvlo... DUN connection via TMobile.... erm I didn't go anywhere near that
:shock:
@freeway
i donot think it can be that easy, i came across alot of threads were all about the ActiveSync and ports and network connections , what made it more complicated.
Click to expand...
Click to collapse
EXACTLY: Nail. Head. Hammer!
This is EXACTLY what my thread explains - I have combined & condensed so much **** you wouldn't believe.
Andy
Dear Underwurl,
i would like to thank u for these amazing information and references , however ( to tell u the truth) it is still confusing to me..
i thouhgt there might be any guidelines where i could go through steps
1-
2-
.
.
and so on...
i think i have no problem connecting my device to the laptop ( not through the dialup thing but through the activesync 4.1 and it says connected in both)
also all reference were talking about incoming ports and outgoings ones which doesnot exist in activesync4.2 ( i know it might exist on 3.8 ver)
1- if it is somehow connected to the activesync, are there anything to be configured for the proxy server , and how ( i'm using my office lan)??
2- when it says connected i try to open IE but all i get is page is under construction...what does that mean???
3- is it something related to the bluetooth (msi) driver or ghosted ports??
u c....i'm going randomly considering all these thoughts, which is confusing me alot...
will appreciate any help...
OK....
So, just to be clear:
Have you installed those nice WICOMM Bluetooth services installed on your PC?
Andy
PS
Do you have WiFi in your office???? Bin Bluetooth if you have!!!!!!!
yes, I installed the BT software that came with my BT dongle
it shows widcomm in my driver data
and no idonot have wifi in my office
what do u think?
while connected with my laptop via activesync, i checked the tcp/ip setting with pocket mechanic, it is showing a different ip address than the one in my laptop connection (LAN connection),
but showing a correct host name
and it says " Local area networks cannot directly communicate across wide area networks because they are defind by a private class of ip's"
any idea?????
when i open internet explorer on my kjam it says "page not found"
is it that difficult for you guys,
no one have gone through this before??
I have some problems with GPRS/EDGE connection using the wireless modem...
I flashed my i-Mate K-Jam Italian, with the latest i-Mate WWE ROM.
Before the flash i never tried the wireless modem, so i dunno if it is a ROM problem....
But...
1) I have serious problems using the USB modem link option, in this mode after about two minutes my modem seems hangs and the connection still stays up but i cannot send/receive any packets from the internet. Also, when i try to disconnect the remote connection through the windows connection icon on my taskbar, the modem logs shows up timeout error contacting modem...... when the timeouts end i cannot use the modem anymore and i got a Error 692...hardware error.... i need to reset the modem or turn on/off the flight mode...
2) After updating my BT Stack (Microsoft) with the native BT drivers of my laptop (Dell Latitude D410), the bluetooh connection seems working fine... but after about 15-20 minutes the modem still hangs like happen with the USB connection. Before the driver upgrade i was stuck in the same way of the USB connection !!
I've disabled ActiveSync USB either on my phone and on my Pc...
My KJAM works fine if i use OperaBeta or IM+ on my phone... so i can connect/disconnect and so on whenever i want !
I've got a Nokia 6021 that ROCKS with EDGE on my laptop, compared to my K-JAM!
Anyone have a solution ?
Is a known problem of the last iMate ROM?
I'm going to be crazy....please someone help me ! Razz
My configuration is:
Dell Latitude D410
ActiveSync 4.1 build 4841
Dell BT driver (Toshiba model)
Software on phone:
SPB PocketPlus, Diary , Backup
OperaBeta 8.5
TotalCommander
smartskey in background
Tomtom
I've uninstalled SPB GPRS monitor and IM+
PS: i'm sorry if i made some English errors i'm italian !
I had the same problem since oct'05 with pda2k. Then I thought I was having a faulty device, so I bought kjam since nov'05. From that month to today I didn't found any solution. I search forums, ask ISP, upgrade to O2, Qtek ............ Nothing worked. So, I think using nokia or a sierra card is the solution.
I want to setup my P3600 (English ROM) as a 3.5G modem for my PC but not successful yet. The Telco service staff has no idea too and pass me a manual for dopod 838 pro. The mentioned programs are not there, nor in my dopod D810 CD.
I can:
- Activesync using USB
- Activesync using bluetooth
Question:
- Should I use the same HTC modem dialer on my PC for XDA?
- Should I use the Start->Program->Internet Sharing?. It allows me to choose bluetooth or USB to PC but both not working too after connect.
Anyone successfully connect their PC via P3600 using HSDPA, pls share the steps. Many thanks.
Eventually, I figure it out myself.
Forget all the HTC modem dialer or wireless modem program as in Xda.
1. Start->Program->Internet Sharing on WM5.0
2. Select the connection type: USB or BT
3. Select "Connect"
4. Then connect the USB and done.
For BT, it would have instruction for you to start PAN now. done.
Woo, it's much easier than the HTC dialer. But now my problem is VPN problem with my telco.
Thanks very much for reporting this info back, it will come in useful when I get my trinity!
mobiler2 said:
Eventually, I figure it out myself.
...
Woo, it's much easier than the HTC dialer. But now my problem is VPN problem with my telco.
Click to expand...
Click to collapse
just 2¢...
Sadly, because Internet Sharing is actually a NAT server running on your phone, it could prevent you from using 'classic' VPN. You can find more details by googling for 'VPN over NAT'.
for VPN purposes you can always use old good wireless modem mode. it works well.
I don't think it is related to NAT. As long as the VPN ports are opened, it should work. I am using a Wireless router at home and no trouble at all for using VPN under NAT.
Checked with telco. They can enable it for me with extra charge/month. and also the traffic would be charged as expensive GPRS plan. What kind of service!!!
Think twice before subscribing. I used "WonToFee / 1-1-" . The sales that say it can work for VPN may not even know what a TCP port is.
Anyone has use VPN over HSDPA with another telco? e.g. SMOOTH TONE
Hello,
This thread is a bit old, however I think it is related to my problem: I am trying to use Internet Sharing on my P3600 (ROM 1.23.405.2 / Radio ROM 1.38.00.11). Using BT, it works just fine. However, when connected on USB it works fine only for the first time. When I tap "disconnect", the HSDPA connection is stopped, but the status keeps displaying "Connected". There is now way to use Internet Sharing again before a soft reset (Windows XP wouldn't even recognize the P3600 again). Is this a known issue? I have googled a bit, but I haven't found any similar problems.
Thanks!
shefful said:
Hello,
This thread is a bit old, however I think it is related to my problem: I am trying to use Internet Sharing on my P3600 (ROM 1.23.405.2 / Radio ROM 1.38.00.11). Using BT, it works just fine. However, when connected on USB it works fine only for the first time. When I tap "disconnect", the HSDPA connection is stopped, but the status keeps displaying "Connected". There is now way to use Internet Sharing again before a soft reset (Windows XP wouldn't even recognize the P3600 again). Is this a known issue? I have googled a bit, but I haven't found any similar problems.
Thanks!
Click to expand...
Click to collapse
Hi shefful,
I have had the same problem. I have come across a possible solution while browsing forums. When you need to disconnect press and hold down the red end call button for a few seconds and this disconnects the modem. I haven't tried this yet but it's worth a shot.
regards
Adam
shefful said:
Hello,
This thread is a bit old, however I think it is related to my problem: I am trying to use Internet Sharing on my P3600 (ROM 1.23.405.2 / Radio ROM 1.38.00.11). Using BT, it works just fine. However, when connected on USB it works fine only for the first time. When I tap "disconnect", the HSDPA connection is stopped, but the status keeps displaying "Connected". There is now way to use Internet Sharing again before a soft reset (Windows XP wouldn't even recognize the P3600 again). Is this a known issue? I have googled a bit, but I haven't found any similar problems.
Thanks!
Click to expand...
Click to collapse
Hi shefful,
I have had the same problem. I have come across a possible solution while browsing forums. When you need to disconnect press and hold down the red end call button for a few seconds and this disconnects the modem. I haven't tried this yet but it's worth a shot.
regards
Adam
Hi adamwolfe,
Thanks for your help, unfortunatelly this is not the solution to my problem. The GPRS connection ends (according to the icon on top of the screen), but the status keeps displaying "Connected". The application stops responding and can't be stopped from Settings/Memory/Runnning Programs.
Hi shefful,
Yeah, I have the same problem too. Looks like the program freezes in the Connected status. Even tried terminating Internet Sharing with Start/Settings/.../Memory/Running Programs and relaunching Internet Sharing.
Sometimes I get a popup message saying the remote host has terminated the connection before the program hangs. I think this may be the cause of the problem. Which mobile operator are you on?
Rebooting is the only solution so far. Fortunately the Trinity reboots in 20 seconds - one of the fastest in the PPC market I think.
Hi ayhansan,
For other reasons I needed to hard reset my Trinity and the freezing problem has disappeared. I don't know what had caused this problem, I just hope it won't happen again. If I disconnect the USB cable, the status changes to "disconnected" and I can always reconnect.
same problem here
i am connecting to laptop thru USB
after I disconnect UMTS phone syaing still connected
and want kill Internet Sharing
???
thanks
regards
mobiler2 said:
Eventually, I figure it out myself.
Forget all the HTC modem dialer or wireless modem program as in Xda.
1. Start->Program->Internet Sharing on WM5.0
2. Select the connection type: USB or BT
3. Select "Connect"
4. Then connect the USB and done.
For BT, it would have instruction for you to start PAN now. done.
Woo, it's much easier than the HTC dialer. But now my problem is VPN problem with my telco.
Click to expand...
Click to collapse
does this work with Mac as well?
With internet sharing, my Kaiser used connect to the internet (T-Mobile mobile broadband) without problems fro the past year. Now since I got the HD, my internet connection is inconsistent. Sometimes it tries to load pages for ages, then timeouts, and sometimes it works like a charm. I don't think it's because of the signal, because network coverage seems fine (nearly always at 4 bars with HSDPA).
Has anybody been experiencing something similar ? Don't really think it's a problem related to USB because when my internet connection doesn't work when connected via USB, I sometimes switch to bluetooth, and that seems to work for a while, then it fails again.
I also tried it on a PC with XP, and had similar problems. Any ideas ?
Thanks
sbirsen said:
With internet sharing, my Kaiser used connect to the internet (T-Mobile mobile broadband) without problems fro the past year. Now since I got the HD, my internet connection is inconsistent. Sometimes it tries to load pages for ages, then timeouts, and sometimes it works like a charm. I don't think it's because of the signal, because network coverage seems fine (nearly always at 4 bars with HSDPA).
Has anybody been experiencing something similar ? Don't really think it's a problem related to USB because when my internet connection doesn't work when connected via USB, I sometimes switch to bluetooth, and that seems to work for a while, then it fails again.
I also tried it on a PC with XP, and had similar problems. Any ideas ?
Thanks
Click to expand...
Click to collapse
Hey there,
I'm experiencing the exact same problem with my Touch Diamond ...
My internet sharing via usb has been working fine for months now until this this week. Now, since monday, connection times out, loads half a page, etc. i.e. exact same symptoms as yours.
Internet sharing via bluetooth works fine.
Need help PLEASE!!!
Cheers
[email protected] G
It lasted for a few days and since last week it's working brilliantly as it should. Maybe it was just a network issue ? Did you manage to get your connection to work again ?
I also think it's network related ...
It was working fine again for one day, then it just started acting up again.
I now use the bluetooth connection instead of USB. Seems to be much more reliable and for some reason I'm getting better speeds than via USB.
I always thought USB wud be much quicker.
If only our ISP can get their damn act together.
Thanx for the feedback ..
Cheers
Has anyone found a solution to this problem? I'm having the same exact issue with my Raphael.
Hey... my Problem is the Internet, Data Connection to works fine very fast.... but the Internet Sharing with computer doesnt work anymore since Yesterday... but i dont know why... i flash new ROM and Radio Yesterday soo maybe thats why...
I flash Duttys V2.1 and the 1.12.25.16 radio....
Is it at all possible to use internet sharing and activesync or use the phone as a modem while using active sync?
O and O said:
Is it at all possible to use internet sharing and activesync or use the phone as a modem while using active sync?
Click to expand...
Click to collapse
So far i know active Sync Closing if you use it as Modem...
So no Sync and modem at all? That sucks, worked great for ym old Nokia.
I have noticed the following problem:
When I use my HD as a modem it functions properly for about the first 15 minutes, then HSDPA icon disappear and remain fixed only 3G icon and the connection becomes very slow.
Similarly this happens even if I use my HD with built in opera browser; besides in this manner I notice that the memory usage increases: even if I stop the internet connection and I delete cache the memory usage remain high and it is necessary to perform a soft reset to fix it.
I've tried with another sim card and GSM operator; with HSDPA and HSUPA enabled and supported by the operator, but I've experienced the same problems.
If I use my old USB or express card wireless modems I have no problems and the connection is always very fast
A ROM upgrade by HTC to solve once and for all this problem will be appreciated !!!