Hey Guys,
I'm new to the PPC,where i just bought a K-Jam and installed activesync 4.1 on my laptop (winxp sp2).
i have also a bluetooth dongle (MSI) and it seems to be working fine with me, i can connect my kjam to the laptop to syncronize my data.
now when it comes to using the internet via my laptop, i'm lost
i've been reading all threats which confused me when setting up the connection and i'm still not able to work it.
please if anyone can help me step by step , i'll be thankfull
thanx in advance.
I have noted by Bluetooth experiences with connecting my Xda Exec to my Home PC internet connection. It took me over a weeks worth of shouting & frustration to get this working as I ended up falling down every pitfall you could fall down! :evil:
Anyway, take a look here:
http://www.xda-developers.com/viewtopic.php?=42488
GL
Andy
all you need to do is discover your device and connect to the dial-up networking connection.....
once that's done it's just a matter of getting the correct phone number, username and password (if applicable).
In the US for T-Mobile the phone number is *99# and there is no user name or password.
dear underwurld
thinks for your fast response and for trying to help, not sure if the link is working at the moment , i've tried to open it several times.
lvlolvlo,
i donot think it can be that easy, i came across alot of threats were all about the activesync and ports and network connections , what made it more complicated.
any help..?
Oops sorry about that....
Missed a bloody 't' out try again:
http://forum.xda-developers.com/viewtopic.php?t=42488
@lvlolvlo... DUN connection via TMobile.... erm I didn't go anywhere near that
:shock:
@freeway
i donot think it can be that easy, i came across alot of threads were all about the ActiveSync and ports and network connections , what made it more complicated.
Click to expand...
Click to collapse
EXACTLY: Nail. Head. Hammer!
This is EXACTLY what my thread explains - I have combined & condensed so much **** you wouldn't believe.
Andy
Dear Underwurl,
i would like to thank u for these amazing information and references , however ( to tell u the truth) it is still confusing to me..
i thouhgt there might be any guidelines where i could go through steps
1-
2-
.
.
and so on...
i think i have no problem connecting my device to the laptop ( not through the dialup thing but through the activesync 4.1 and it says connected in both)
also all reference were talking about incoming ports and outgoings ones which doesnot exist in activesync4.2 ( i know it might exist on 3.8 ver)
1- if it is somehow connected to the activesync, are there anything to be configured for the proxy server , and how ( i'm using my office lan)??
2- when it says connected i try to open IE but all i get is page is under construction...what does that mean???
3- is it something related to the bluetooth (msi) driver or ghosted ports??
u c....i'm going randomly considering all these thoughts, which is confusing me alot...
will appreciate any help...
OK....
So, just to be clear:
Have you installed those nice WICOMM Bluetooth services installed on your PC?
Andy
PS
Do you have WiFi in your office???? Bin Bluetooth if you have!!!!!!!
yes, I installed the BT software that came with my BT dongle
it shows widcomm in my driver data
and no idonot have wifi in my office
what do u think?
while connected with my laptop via activesync, i checked the tcp/ip setting with pocket mechanic, it is showing a different ip address than the one in my laptop connection (LAN connection),
but showing a correct host name
and it says " Local area networks cannot directly communicate across wide area networks because they are defind by a private class of ip's"
any idea?????
when i open internet explorer on my kjam it says "page not found"
is it that difficult for you guys,
no one have gone through this before??
Related
Hi
I want to use my XDA2i to connect my laptop to the net....
Any ideas how to achieve this, thinking bluetooth laptop to XDA then use GPRS on XDA to connect.
Thanks
Hi,
Look overhere ftp://xdaupload:[email protected]/USB_modem/ for modem driver & documentation.
Cheers, M
Hi
Thanks for the reply, however, I want to connect my laptop through bluetooth to my XDA and use the GPRS on my XDA to connect to the net.
I need to achieve this without using a USB connection, if I understand correctly the link you supplied tells me how to connect USB modem etc.
Maybe I'm completely misunderstanding. It's all so simple using a Nokia 6230i, plug and play virtually!! (until my company deactivated data calls:-()
Any help would be appreciated.
Thanks
Set the Connection Type to Bluetooth in the Wireless Modem program, then push the start button & make the BT connection to your laptop. Hope it works this way or experiment a little with it pls. I use the USB connection & don't have BT on my PC, so can't try the settings myself.
Regards, M
As I assume that you're using Windows vom Micro$oft, just Pair the two devices (not using 'Wireless Modem').
It will automatically install a Bluetooth-Modem
David
Hi
What type of connection do I need, I can only find a network access connection to my laptop, thats all that is available.
I am using a HP laptop with XP home, its a new one so would imagine everything is in order.
seek and you shall find
http://forum.xda-developers.com/viewtopic.php?t=24383
Thanks for the replies people...
Although I have to admit I'm struggling still....given up on the bluetooth connection and reverted back to USB cable but still I can't connect.
Here's the steps I have used:
Unticked Active Sync allowing USB connections.
Restarted laptop, connected USB cable to XDA and selected Wireless Modem, used the drop down to select USB and selected Start.....
the documentation etlls me that my laptop will go into a plug and play routine of allowing me to install it as a modem but this does not happen.
And yes, I have admin rights on the laptop.
Do I have to do anything with connections/modems because I haven't.
Am I being thick? Not sure but it's driving me to distraction...
start the modem program on your XDA (Start-Programs) and conenct it, windows will ask for a driver. install the driver from ftp. then create a new modem connection in windows. here (in germany) the number windows must call is *99# (for GPRS/UMTS)
Thank you for your patience...
The XDA installed as stated using driver on FTP, great.
Run up IE, tools, options, connections and added a dial up connection called XDA USB Link.(com8)
Settings of which are:
user name2web
passwordassword
untick automatically detect settings
untick configuration script
untick proxy server
Not sure where I'm going wrong but when I dial it errors with...No dial tone detected.
To recap I am dialing with GPRS connected on XDA and the WModem program connected through USB started
Am I missing something?
Can anyone help??????
Please?????
Try running usbmodemdialer instead of DUN by IE, it's in the package on the ftp.
Cheers, M
Hi
OK, I am now using the HTC USB dialer but I'm receiving an error 734 code, which is a PPP issue.
To recap, I am starting Wmodem, connecting to laptop (GPRS off) using a USB cable. Starting HTC USB Modem with APN as Internet & modem as HTC USB modem.
On XDA I get a connection light, then send and receive lights flash before the lot dissapear. The laptop goes through Connecting/verifying/registering then Remote access error 734.
I'm nearly there...
Please excuse my ignorance on this subject :roll:
Thanks
Yeah seems like it again :--(
Upload is running to ftp://xda:[email protected]/Uploads/
Regards, M
Hi
Ive done everything as suggested but I'm getting a 680 error, this I believe is a "no dial tone" error.
Please, where am I going wrong?
Thanks
Gary
Frankly I haven't got the slightest idea what's going wrong. It works like a charm with my magician & Windows XP Sp2.
M
Hm how could the line be busy? are you phoning the same time? (always when you try to connect? sorry silly question.)
Are you sure your provider give you GPRS Access? (i don't know any who don't )
did you a google search on this error?
Hi
Yes, I googled it and it appears to be "No dial tone" not line busy....I'm not in a call when attempting to connect.
I've tried every possible combination of settings......usernames and passwords etc....
There isn't any issues with my laptop and updates etc. I am sys admin by day!!! This is just beating the hell out of me. Incidentally my laptop is a HP pavillion zd8369ea, a new one!!! Alpine is running radio 1.04.
Yes, data calls are enabled on my SIM, I can connect perfectly to IE on XDA and mail etc.
Taken down all firewalls etc and nothing....
Help
Thanks
Gary
Follow the instructions here:
http://www.seeo2.com/html/HowToUse/XdaII/How to setup Wireless Modem for Bluetooth.htm
At part 5. the line you need is:
AT+CGDCONT=1,"IP","mobile.o2.co.uk","",0,0
At point 11. you don't need a user name or password.
How can you use GPRS Internet from your O2 Exec/JASJAR on Laptop/Desktop computer?
I am guessing there should be a way through the wireless modem. Any ideas guys?
Activate the wireless modem, install the device as a modem on the computer.
Dial *99# with the computer..
Hi all
I just avtivated by wireless modem through similarly named app on Exec.
Then on laptop dialed *99# and all was looking well until Win XP laptop said registering computer on the network.
Then error message on Laptop said device wasn't functioning.
Whilst it was trying though the coloured lights on the wireless modem(exec) app were flashing away like merry.
That was entertaining enough but any clues as to where I'm going wrong?
Using a bluetooth dongle with IVT soleil on laptop.
Which works for activesync and headset.
Have stopped activesync on exec in order to get this far.
Phil
You have to install USB modem drivers for your Exec on your XP desktop. I don't know if the modem will work through bluetooth. I use USBmodem drivers with my Vario and it works perfectly. I don't know if you need to use different drivers for your Exec, but I will attach the ones that work with the Vario.
fillippe said:
Then error message on Laptop said device wasn't functioning.
Phil
Click to expand...
Click to collapse
Try a soft reset (that worked setting up a mate's Universal with the same error), sounds like you have the modem installed and everything else set up.
Btw when his couldn't connect with that error, it couldnt connect to the network when not functioning as a modem anyway.
thank you for the modem driver for Universal! I really looking for it :wink:
this is about the best walkthrough i have ever read. so Koksie thanks if you wrote this....
anybody got any ideas when this error comes up when i go to start "4- Then in Programs, click on "Wireless Modem". With the Connection type on USB, click on "Start". " and i click start thie error "ERROR .... COME OPEN ERROR"
any ideas what that means?!
Jay
I did not write it myself, just found it and passed it on because it worked perfectly for me. I have no idea why it gives the error you mention. I think the walk through was found on this forum, perhaps try to find the thread and ask the question there? The person who posted this originally might perhaps know the answer. good luck!
I've tried this loads of times all I get is a COM OPEN ERROR on the XDA.. it did work once briefly then wont work again..
I've tried this loads of times all I get is a COM OPEN ERROR on the XDA.. it did work once briefly then wont work again..
I had the same problem. In bluetooth settings delete all the outgoings port that you created. In my case it was port 8 for gprs....Now works¡¡
well thanks for the help.. lol although that doesn't sound to promising maybe i will take it back to o2?
arhh just saw dherrero's reply i may try thatl
jay
hey hey! great thanks for that works brillantly. now i just need to test my tomtom to see if he can stil connect to my GPS device:
Update
Koksie and Kevino most helpful.
I gave up on Bluetooth and got me USB cable out.
The USB modem connects and works well now.
I am not sure the "receive all incoming beams" tick is neccessary?
For O2 customers I found this which was quite useful for the USB Modem Connections settings on the Laptop/PC.
http://flash.o2.co.uk/productsservices/mobileweb/pdfs/Windows manual set up instructions.pdf
BTW I can connect for my emails but have to setup a new Email Account in Outlook to send using the O2 smtp server (smtp.o2.co.uk).
However I still can not get Internet Explorer to be able to browse on this GPRS connection, any ideas?
Re: Update
fillippe said:
BTW I can connect for my emails but have to setup a new Email Account in Outlook to send using the O2 smtp server (smtp.o2.co.uk).
However I still can not get Internet Explorer to be able to browse on this GPRS connection, any ideas?
Click to expand...
Click to collapse
Well m8...as you bring this up...
If anyone can shed some light on this it would be great.
It seems to me tat this problem is only with o2 :?
I have also tried in the passed to make phones work with laptops an tomtom go's etc for the gprs connection usage and had no joy.... at first i thought it was the phones...tested with Nokias 6310i, 6230, 6230i, SE t630, w800, w900i, etc all running the latest firmware and 02 active settings and always connection errors.
In the meantime ALL the other networks like voda, t-mobile, orange etc work like a charm on the same setups.
:?: :?:
BR
Like already write, I'm looking to helps ref a singular problem in my ppc branded SB but with sw THC in english - I was buy it in thailand one month ago and until 20 of december everythink was ok, but...
I found that the ROM contain the: HTC TyTN 1.18.255.106 ExtROM WWE
The NETWORK MANAGER show me that the tytn is CONNECT to WIFI access point but in the CONNECTIONS always appear no any presence of WIRELESS SERVICE that I can select to use for browse my server , internet and/or skype call
If I use the usb connection there is connection, same by umts and gprs services
Really I don't unterstand what's happen!
I was already many time doing the hard reset but nothing is change!
What you think about?
May be that there are corrupted files that avoid to install few commands?
Regards Freddie
There are the other part of sw that are install in the device by the manufacturer or seller that are not include inside the rom place?
Thanks in advance for your helpings
Black Eagle
go to setting >connections>network cards>
then
you will see a bunch of access points
when you see the one that says available
hold the styles down on it
tap connect
and you should be ok
also check the drop down menu on the bottom of the page
make sure its on both access points and whatever else it says
and also disable the cingular proxy
start>settings>connections>connections>setup proxy server>uncheck the uses proxy server to connect to the internet box
Sorry may be that I was wrong explaine you:
1. in the setting>connections>network cards = no problem my tytn find the access point and after my prompt connect without problem.
2. the problem is in the setting>connections>connections>advanced>select networks>my ISP>edit ... = where there are no tracks of the wireless network available to be select, in way to use the wifi connection that in setting>connections>network cards is ON
I wait your reply thanks
Black Eagle
black eagle,
I think I've undertand your question...
If you have found the WiFi access point and have gotten conected, there is no need to set a conection for that access point;At least, for me that it's not necesary.
When I go to a public place with wifi, or in my home LAN, just let the connections settings to "My ISP" without any changes (no new modem, nothing at all) and thats all, you can surf the net.
regards;
mablan
my problem solved
hi mablan,
thanx very much, fortunately i searched the forum for wifi and got ur post.
i too had the problem of getting good wifi connectivity over my adsl router witg my prophet( O2 neo) but not able to surf net in PIE. when i selected network as "My ISP" it all gone and now i am able to surf my adsl on neo, without any prblem.
thanx once again.
now only problem arises of autometically shifting/choosing of network for wifi and gprs. i remember it is stated somwhere in forum, i will make a try.
Hello mablan,
thanks for your interesting in my singular problem.
I understand what you mean but is not my case, even if my ppc in the setting>wireless lan>advanced>status result connected to the network, I cannot surf internet.
If I go to setting>networks cards i find my home hotspot that result waiting to connecting but ... always not connected
= in the wireless lan I am connected but in the network cards my connection don't exist - also in the connections>connections there is not the choice to select wireless network, don't exist
Hi BlackEagle, now I undestand your problem.
I'm sorry, I don't know what could be the cause of your problem.
Just a dumb question: Have you try to change the settings of your wireless network? I mean, in settings>connections>networkcards tap the name of the wn you want to use and change the settings of the Network key and 802.1x tabs...
If I found arround someplace something that can help you will let you know
regards and hope you find the answer..I'm sure someone here at the forum will help you
mablan
The Wifi Problem Is Now Solved
Hi friends,
I have find the cause of my problem all was in the .NET CF too old
after install of .NET CF 2.0 my problem was end
crazy that my problem was just an old driver
In any case thanks to all that just reply my questions
BLACK EAGLE
Hello I have the same problem, my wireless connection is there, I try to connect and it goes unavailable!!!!
I changed my tytn system from japanese to english but it was working just fine before. after for the first 2 days...
Now even when I reset it to Japanese S.O. does not connect to wifi only GPRS3G!!
Maybe too many hard reset???
What is .NET CF??
Maybe I should try that?
I have a lot of network cards in the list
IEEE 802.11b/g Compatible Wi-Fi Ad...
NE2000 Compatible Ethernet Driver
Virtual Ethernet Intermediate
Remote-NDSI Host
PPTP NDISWAN Miniport
L2TP NDISWAN Miniport
Microsoft null Ethernet Miniport Driver
????????????????????????????????????
Which one shuold I choose????
????????????????????????
Hi,
.NET CF2 is the microsoft.NET software that can you download from msoft website:
http://www.microsoft.com/downloads/...cb-4362-4b0d-8edd-aab15c5e04f5&displaylang=en
download it 22,6 mb and with your device connect by usb install it, when you start the installation, it find your device connect and install just the appropriate drivers, not all the sw
Black Eagle
Thanks Black Eagle I`ll try that!
BLACK EAGLE said:
Hi,
.NET CF2 is the microsoft.NET software that can you download from msoft website:
http://www.microsoft.com/downloads/...cb-4362-4b0d-8edd-aab15c5e04f5&displaylang=en
download it 22,6 mb and with your device connect by usb install it, when you start the installation, it find your device connect and install just the appropriate drivers, not all the sw
Black Eagle
Click to expand...
Click to collapse
Black Eagle
This installable is for computer, its not for a mobile device. The microsoft webpage does not say this is for Windows Mobile OS.
KTyTnUser, check the date of the last post so as not to make a fool of yourself. It was almost 2 years ago....
ultramag69 said:
KTyTnUser, check the date of the last post so as not to make a fool of yourself. It was almost 2 years ago....
Click to expand...
Click to collapse
so?
i am having the same problem with windows M 6 so looking for solutions. how does it matter if someone else faced the same problem 2 years ago?
Its relevant because MS may not be offering the same software to download. I've noticed that some of the older solutions aren't any good for certain things anymore as the apps no longer work for the OS I'm using or that the app, though easily found a while ago, is no longer supported by certain sites.
2 years is forever in the computer world....
Hi Guys finally i get this nice device but it seem to don't like my MacBook..
For Sync i used the Missing Sync programm and all work Good but for going in Internet using my Trinity as a modem it NO WAY...
Who can slove this problem?
Have you try to use it as a Modem for an apple copmputer?
Thx a lot Guys!
Try this: go to Settings, Connection, USB to PC and uncheck "Enable advanced network functionality". This way the phone should be recognised as a USB modem.
(I don't have a Mac so I haven't tried this myself)
thx i try it but it doesn`t work!
I try on xP and i have the same problem!
BrigateGB said:
Hi Guys finally i get this nice device but it seem to don't like my MacBook..
For Sync i used the Missing Sync program and all work Good but for going in Internet using my Trinity as a modem it NO WAY...
Who can solve this problem?
Have you try to use it as a Modem for an apple computer?
Thx a lot Guys!
Click to expand...
Click to collapse
I certainly have been trying... the first thing that I find is that when I connect it to the Apple using the USB cable is that it doesn't recognise it. Has anyone had more success with this? The only problem is that I can't remember what happened when I first connected it - perhaps it asked me to set up a connection and I got it wrong. This is my first return to Macs in ten years, so I was a little overwhelmed by trying to get familiar both with it and with a new phone (Dopod D810).
If I did set up a connection... (!) then I think the connection is called "SerialPort-1", and the network report says that it is configured, but not connected. I don't seem to be able to delete it and start again. Maybe the Mac isn't even recognising the USB connection?...? Any feedback would be much appreciated!
This has been discussed many times - no DUN service with Trinity ...
But no problem going online with your MacBook. Make sure you update to the latest OSX.
Then delete old bluetooth connections to Trinity on your MacBook and reconnect using bluetooth
Then start Internet connection sharing on your Trinity - then click on the bluetooth symbol (top right) on your MacBook and choose the New Option connect to Bluetooth Pan (your owner name)
Hope it helps
Hello,
I have a huge problem concerning my XDA Neo (Prophet)!
Months ago I had a XDA Mini and when it was connected to my computer I had an internet connection on my XDA.
This does not work on my XDA Neo. Im not able to establish a connection and I really need to, because several programms (SPB Insight) need to update via Internet, and normally they would start automatically but they cant connect to the internet!
I tested Pocket IE and it doesnt work either! If I establish a connection via GPRS everything works fine.
Are there any differences between XDA Neo and Mini that could explain this problem? Do i have to change settings in order to get a connection?
Did i miss anything else?!?
Please Help, I didnt find anything useful via Search or via Google. Everything was related to WLAN !
Thank you in advance!
Jack Bauer
Well, it works .. now?!? Dont ask me why. I established a new partnership (did this 2 times .. before), and now I have a connection!?
If someone has a clue why it didnt work ... tell me !?
Bauer
Two possibilities:
1) Firewall, since with WM 5 and up the device is recognized as a network by the PC.
2) Mismatch in settings between ActiveSync->Connection settings->'This computer connects to...' and (on the phone) Settings-Connections->connections->Advanced->Network selection
Hi, i had a similar problem, tried a few things, and it worked
1. On your device, open Connections, click Advanced :
Select MY ISP for programs that connect to the internet
Select MY WORK NETWORK for private network
2. Open Activesync, Connection settings, Select "Internet"
Try and see if that works, if it doesnt, there is a LVM Reg patch file in this forum for the desktop, which makes it work for sure.
Cheers
zeusin