Hi
I want to use my XDA2i to connect my laptop to the net....
Any ideas how to achieve this, thinking bluetooth laptop to XDA then use GPRS on XDA to connect.
Thanks
Hi,
Look overhere ftp://xdaupload:[email protected]/USB_modem/ for modem driver & documentation.
Cheers, M
Hi
Thanks for the reply, however, I want to connect my laptop through bluetooth to my XDA and use the GPRS on my XDA to connect to the net.
I need to achieve this without using a USB connection, if I understand correctly the link you supplied tells me how to connect USB modem etc.
Maybe I'm completely misunderstanding. It's all so simple using a Nokia 6230i, plug and play virtually!! (until my company deactivated data calls:-()
Any help would be appreciated.
Thanks
Set the Connection Type to Bluetooth in the Wireless Modem program, then push the start button & make the BT connection to your laptop. Hope it works this way or experiment a little with it pls. I use the USB connection & don't have BT on my PC, so can't try the settings myself.
Regards, M
As I assume that you're using Windows vom Micro$oft, just Pair the two devices (not using 'Wireless Modem').
It will automatically install a Bluetooth-Modem
David
Hi
What type of connection do I need, I can only find a network access connection to my laptop, thats all that is available.
I am using a HP laptop with XP home, its a new one so would imagine everything is in order.
seek and you shall find
http://forum.xda-developers.com/viewtopic.php?t=24383
Thanks for the replies people...
Although I have to admit I'm struggling still....given up on the bluetooth connection and reverted back to USB cable but still I can't connect.
Here's the steps I have used:
Unticked Active Sync allowing USB connections.
Restarted laptop, connected USB cable to XDA and selected Wireless Modem, used the drop down to select USB and selected Start.....
the documentation etlls me that my laptop will go into a plug and play routine of allowing me to install it as a modem but this does not happen.
And yes, I have admin rights on the laptop.
Do I have to do anything with connections/modems because I haven't.
Am I being thick? Not sure but it's driving me to distraction...
start the modem program on your XDA (Start-Programs) and conenct it, windows will ask for a driver. install the driver from ftp. then create a new modem connection in windows. here (in germany) the number windows must call is *99# (for GPRS/UMTS)
Thank you for your patience...
The XDA installed as stated using driver on FTP, great.
Run up IE, tools, options, connections and added a dial up connection called XDA USB Link.(com8)
Settings of which are:
user name2web
passwordassword
untick automatically detect settings
untick configuration script
untick proxy server
Not sure where I'm going wrong but when I dial it errors with...No dial tone detected.
To recap I am dialing with GPRS connected on XDA and the WModem program connected through USB started
Am I missing something?
Can anyone help??????
Please?????
Try running usbmodemdialer instead of DUN by IE, it's in the package on the ftp.
Cheers, M
Hi
OK, I am now using the HTC USB dialer but I'm receiving an error 734 code, which is a PPP issue.
To recap, I am starting Wmodem, connecting to laptop (GPRS off) using a USB cable. Starting HTC USB Modem with APN as Internet & modem as HTC USB modem.
On XDA I get a connection light, then send and receive lights flash before the lot dissapear. The laptop goes through Connecting/verifying/registering then Remote access error 734.
I'm nearly there...
Please excuse my ignorance on this subject :roll:
Thanks
Yeah seems like it again :--(
Upload is running to ftp://xda:[email protected]/Uploads/
Regards, M
Hi
Ive done everything as suggested but I'm getting a 680 error, this I believe is a "no dial tone" error.
Please, where am I going wrong?
Thanks
Gary
Frankly I haven't got the slightest idea what's going wrong. It works like a charm with my magician & Windows XP Sp2.
M
Hm how could the line be busy? are you phoning the same time? (always when you try to connect? sorry silly question.)
Are you sure your provider give you GPRS Access? (i don't know any who don't )
did you a google search on this error?
Hi
Yes, I googled it and it appears to be "No dial tone" not line busy....I'm not in a call when attempting to connect.
I've tried every possible combination of settings......usernames and passwords etc....
There isn't any issues with my laptop and updates etc. I am sys admin by day!!! This is just beating the hell out of me. Incidentally my laptop is a HP pavillion zd8369ea, a new one!!! Alpine is running radio 1.04.
Yes, data calls are enabled on my SIM, I can connect perfectly to IE on XDA and mail etc.
Taken down all firewalls etc and nothing....
Help
Thanks
Gary
Follow the instructions here:
http://www.seeo2.com/html/HowToUse/XdaII/How to setup Wireless Modem for Bluetooth.htm
At part 5. the line you need is:
AT+CGDCONT=1,"IP","mobile.o2.co.uk","",0,0
At point 11. you don't need a user name or password.
Related
Hello:
I am using the "Wireless Modem" to connect my laptop to the web via GPRS on my PDA2k. When I use the connection via USB (cable between laptop and PDA2k), it works perfectly. When I do it via Bluetooth, I get the error message "Error 734: The PPP link control protocol has been terminated" right after it tries to register the computer on the network. It seems to recognize the username and password fine, but then it shows the error message and drops the connection.
Any clues as to why this is happening? I have the exact same settings in both the USB and BT dialup connections. I'd like to be able to use BT because it is one less cable to carry around.
Any help is greatly appreciated.
Thanks.
Fernando
bluetooth modem connection problem
Hi, i read in other forum about this problem, is it setting problem or XdaII problem?
I plan to get one mainly for this purpose, if it is a problem then i have to get something else.
any one please help to clearify.
thanks
AlexT:
I did this OK with my old MDAII, so I think this is not a Himalaya (MDA2, XDAII) problem, but rather a Blueangel (MDA3, PDA2k) problem.
Fernando
I had this problem recently while abroard.
Even though it "dials" the default GPRS connection you need to manually enter the correct APN name in WirelessModem->tools->settings. It defaults to the APN of the first GPRS account entered rather than the one currently active.
Hope this helps.
Do you know which ROM your version of wmodem came with? (wmodem is installed with the OS ROM not the Ext ROM, right?) Looking at mine, which I think is from i-mate, there is no tools menu in the wmodem applet, and therefore, no place to set/check the APN...
hey anyone has the JAM driver for the wireless modem? If yes can someone please post it here or attach it on this thread. I really need it in an emergency as I am away from my home and don't have the CD with me for the time being. Please please please can someone send me the file
thanks in advance
ysatti
hey anyone has the JAM driver for the wireless modem? If yes can someone please post it here or attach it on this thread. I really need it in an emergency as I am away from my home and don't have the CD with me for the time being. Please please please can someone send me the file
thanks in advance
ysatti
I figured my question out. It is included in the ExtRom. The version included in OEM_TMO_NL_IssueFix_142115.sa.CAB in T-Mobile_MDAIII_Ext_Rom_142115_WWE.rar has the Tools menu.
ysatti, there are a few versions floating around. Try this modem driver:
ftp://xda:[email protected]ers.com/Uploads/USB_modem
or this one:
ftp://xda:[email protected]/Uploads/Blueangel/O2_UK_Xda_IIs_Upgrade_v140242.exe/
If those don't work, try the attached CDMA version, even though you have a GSM phone. (Remeber you have to be logged in to see attachments)
hello, did anybody found out the solution? I had exc the same problem with my xda mini now. But couple months ago I canuse the bt wireless modem without any problem. I don't know what's up, I did not make any change on setting and installed new progame this period. Last the bt is worked, I can send and received files between the pc and mini.
hello, did anybody found out the solution? I had exc the same problem with my xda mini now. But couple months ago I canuse the bt wireless modem without any problem. I don't know what's up, I did not make any change on setting and installed new progame this period. Last the bt is worked, I can send and received files between the pc and mini.
Hi!
Did you add in modem properties initialisation string?
For me: AT+CGDCONT=1,"IP","www.umc.ua". I didnt use modem dialer, only usbmdm driver. Connection set up manualy. Sorry my little English ).
kevino said:
I had this problem recently while abroard.
Even though it "dials" the default GPRS connection you need to manually enter the correct APN name in WirelessModem->tools->settings. It defaults to the first GPRS provider entered rather than the one currently active.
Hope this helps.
Click to expand...
Click to collapse
That's work for me. After add the APN, now I can use bt wireless modem.
Thanks
bartman,
Glad it helped.
Dasert75's solution should work as well, and for people without the "tools menu" because it does the same thing.
Seems silly that it uses the default GPRS account but does not get the APN from the settings for that account though.
com open error (8)
i installed wm2005
but when i try to activate the witreless modem on my device on usb connection it says
com open error (8)
any one has any idea ?
I have Imate pda 2 .I Want to use it as an external modem and connect my notebook ( Hp Pavillion 4141) to the internet via GPRS through bluetooth
Could someone please give me a step by step ( I am a novice ) instruction as to how to do this?
hi
did u find a solution ! ??? i can help if u r still Not able to do it.
i could do with a hand
i have the O2 XDAIIi. I followed the O2 instructions from there web site. Im connecting my Tosiba Laptop to the XDA via USB. i can get the laptop to see the xda as a wireless modem, it talks to the xda and the xda shows the 'flashing' modem lights on the screen. the problem i have is the laptop just says page cant be displayed. If you have idiot instructions that wouls be great. the laptop is running XP home edition.
Thanks Pete
I'm very interested in this, because I have "free" gprs at the moment, and if i could run my laptop VIA gprs (even if it is slow) it would free my life up alot!
I didn't even manage to get as far as my laptop seeing my XDA IIi as a wireless modem. Could you send me the link on the O2 site on how to get that far?
the site is here
http://www.my-xda.com/xda2i_spec.html
scroll down and you find this and more
http://www.my-xda.com/downloads/SettingUp_XdaII_s_i_modem.pdf
No when I came to set this up I found my XP didnt match the screen shots so did my best.
also it tells you to put the xda in modem opertation when in the cradle but you need to do it before for, so the PC sees it as a modem rather than xda
Pete
Hi
Someone knows where to get the HTC USB modem driver ?
I don't have thedisk
Thanks
I got it....should be tagged to this message!!
I also managed to get the thing working in the end...
I uninstalled the modem and the network link.
ran the modem prog on the xda, hit start plugged into the usb on the laptop
The laptop active sync disabled before plug in!!
Finds the HTC modem and installs
Then rather than setting up a connection I launched internet explorer, tool, internet options, connections
set one up through there...
YOU DO NEED to add the initalization string from the O2 instruction sheet for the serial connection though. otherwise it fails the connection
AT+CGDCONT=1,"IP","MOBILE.O2.CO"
also check out this place for more info on GPRS settup
http://www.filesaveas.com/gprs.html
Pete
perfect!!
TDIPower said:
I got it....should be tagged to this message!!
I also managed to get the thing working in the end...
I uninstalled the modem and the network link.
ran the modem prog on the xda, hit start plugged into the usb on the laptop
The laptop active sync disabled before plug in!!
Finds the HTC modem and installs
Then rather than setting up a connection I launched internet explorer, tool, internet options, connections
set one up through there...
YOU DO NEED to add the initalization string from the O2 instruction sheet for the serial connection though. otherwise it fails the connection
AT+CGDCONT=1,"IP","MOBILE.O2.CO"
also check out this place for more info on GPRS settup
http://www.filesaveas.com/gprs.html
Pete
Click to expand...
Click to collapse
thats exactly... the way it should be.. 100% working!
anybody out there with a macintosh who has done this??????
Just getting around to trying your instructions.
If this works I will be super happy. More happy than a Chocoholic in a chocolate wearhouse....or an alcoholic with the keys to a brewary.
this stupid board
just to clear this up for the USB mode you still need to enter the string. which can be found on the O2 instructions for the serial connetion of i posted there anyway.
Pete
I attempted to set it up, but got no-where really....
The instructions are very confusing.
tomw86 Ive added you to msm so you if you're on i can try and chat you through it.
Did you get the modem installed??
Here's how I did it.
Open active sync, File, connection settings.
Disable the USB option.
Close Active sync
fire up the XDA, Programs, WModem (wireless modem program)
Plug the XDA into the computer.
It should now find the modem and go through the give me a driver bit. Tell it to go manual and point it to where the drive is located, if it is the one I posted above then you will need to unzip it first (I had to zip it to upload onto here) or point to the location on the cd.
Let me know if you get that far. Ill try and sort out the rest. I got the modem connected and the laptop to talk to it, connecting to O2 but my IE wouldnt connect through it. I ended up removing the connection and staring again and it worked.
Pete
How can you use GPRS Internet from your O2 Exec/JASJAR on Laptop/Desktop computer?
I am guessing there should be a way through the wireless modem. Any ideas guys?
Activate the wireless modem, install the device as a modem on the computer.
Dial *99# with the computer..
Hi all
I just avtivated by wireless modem through similarly named app on Exec.
Then on laptop dialed *99# and all was looking well until Win XP laptop said registering computer on the network.
Then error message on Laptop said device wasn't functioning.
Whilst it was trying though the coloured lights on the wireless modem(exec) app were flashing away like merry.
That was entertaining enough but any clues as to where I'm going wrong?
Using a bluetooth dongle with IVT soleil on laptop.
Which works for activesync and headset.
Have stopped activesync on exec in order to get this far.
Phil
You have to install USB modem drivers for your Exec on your XP desktop. I don't know if the modem will work through bluetooth. I use USBmodem drivers with my Vario and it works perfectly. I don't know if you need to use different drivers for your Exec, but I will attach the ones that work with the Vario.
fillippe said:
Then error message on Laptop said device wasn't functioning.
Phil
Click to expand...
Click to collapse
Try a soft reset (that worked setting up a mate's Universal with the same error), sounds like you have the modem installed and everything else set up.
Btw when his couldn't connect with that error, it couldnt connect to the network when not functioning as a modem anyway.
thank you for the modem driver for Universal! I really looking for it :wink:
this is about the best walkthrough i have ever read. so Koksie thanks if you wrote this....
anybody got any ideas when this error comes up when i go to start "4- Then in Programs, click on "Wireless Modem". With the Connection type on USB, click on "Start". " and i click start thie error "ERROR .... COME OPEN ERROR"
any ideas what that means?!
Jay
I did not write it myself, just found it and passed it on because it worked perfectly for me. I have no idea why it gives the error you mention. I think the walk through was found on this forum, perhaps try to find the thread and ask the question there? The person who posted this originally might perhaps know the answer. good luck!
I've tried this loads of times all I get is a COM OPEN ERROR on the XDA.. it did work once briefly then wont work again..
I've tried this loads of times all I get is a COM OPEN ERROR on the XDA.. it did work once briefly then wont work again..
I had the same problem. In bluetooth settings delete all the outgoings port that you created. In my case it was port 8 for gprs....Now works¡¡
well thanks for the help.. lol although that doesn't sound to promising maybe i will take it back to o2?
arhh just saw dherrero's reply i may try thatl
jay
hey hey! great thanks for that works brillantly. now i just need to test my tomtom to see if he can stil connect to my GPS device:
Update
Koksie and Kevino most helpful.
I gave up on Bluetooth and got me USB cable out.
The USB modem connects and works well now.
I am not sure the "receive all incoming beams" tick is neccessary?
For O2 customers I found this which was quite useful for the USB Modem Connections settings on the Laptop/PC.
http://flash.o2.co.uk/productsservices/mobileweb/pdfs/Windows manual set up instructions.pdf
BTW I can connect for my emails but have to setup a new Email Account in Outlook to send using the O2 smtp server (smtp.o2.co.uk).
However I still can not get Internet Explorer to be able to browse on this GPRS connection, any ideas?
Re: Update
fillippe said:
BTW I can connect for my emails but have to setup a new Email Account in Outlook to send using the O2 smtp server (smtp.o2.co.uk).
However I still can not get Internet Explorer to be able to browse on this GPRS connection, any ideas?
Click to expand...
Click to collapse
Well m8...as you bring this up...
If anyone can shed some light on this it would be great.
It seems to me tat this problem is only with o2 :?
I have also tried in the passed to make phones work with laptops an tomtom go's etc for the gprs connection usage and had no joy.... at first i thought it was the phones...tested with Nokias 6310i, 6230, 6230i, SE t630, w800, w900i, etc all running the latest firmware and 02 active settings and always connection errors.
In the meantime ALL the other networks like voda, t-mobile, orange etc work like a charm on the same setups.
:?: :?:
BR
Hi all.
I want to setup my O2 Exec to use as a modem for my laptop.
I have 2 apps on the XDA, Modem Link and Wireless Modem
If I use Modem Link and change the connection to USB, when I click activate it says " Unsupported or unavailable connection. Verify that your phone supports etc etc.". I have closed Activesync on the XDA and tried clicking Activate in modem link when the PC is disconnect to the laptop and also when it is conencted. ActiveSync on laptop is set up not to use USB.
I also tried to use the Wireless Modem app, set to USB and click start, it lights up connected, but can't see how I use it from the laptop.
Can anyone offer any help?
Thanks
Merlin
http://forum.xda-developers.com/viewtopic.php?t=37298
Thanks. I did a quick search and couldn't find that one!
Merlin
rbmerlin said:
Thanks. I did a quick search and couldn't find that one!
Merlin
Click to expand...
Click to collapse
I didn't even search for it, it's on the first page :lol: Did it work you for ya?
Hi. Oh!
No and yes! No, with a USB cable it didn't, Exec kept saying "you must end data call first"
Switched it to use USB and setup laptop to dial *99# on Bluetooth modem and it works. Actually, bluetooth is better then I can keep XDA in my car kit charging in car and use laptop without looking for a cable!
richard
hows the conection done? hopefully usb?
what setting / software are needed on the lappy and tytn?
if at all it can be done?
You can do it through USB, Bluetooth or IrDA.
These instructions are for universal, but the same applies for TyTN:
BlueTooth
IrDA
USB
maybe we should put this on the wiki?
yak86 said:
maybe we should put this on the wiki?
Click to expand...
Click to collapse
Wiki updated, I've put it on FAQs:
http://wiki.xda-developers.com/index.php?pagename=Hermes_FAQs
DUN
Is there a way to use DUN now that it's been disabled because of Internet Sharing?
New Tyten and Vista
Ok, I've been through the 3 ways to connec as a modem, I actually manged to connect ages ago with XP.
I now have a new Tyten, well new for the states but probably old in the rest of the world.
Anyway the New Tyten has a thing called Internet Sharing instead of wireless modem
None of the old settings are there anymore.
It also has a new way to connect via Blue Tooth Pan.
I've tried the Pan way but I had no luck, the connection seemed to work but I couldn't get on the internet.
I then tried USB, I couldn't get Vista to recognise the Tyten, even when I turned off the active synch, anybody got any ideas????
with Vista and WM6 internet sharing I think its easier than DUN. there is a whole how to in the help program on your hermesjust open the help app and search for internet sharing. just make sure your phone and laptop are connected via bluetooth and then open the internet sharing app and click connect make sure its set to bluetooth PAN. on my laptop I have a little bluetooth icon when its on so I right click that and then connect via persoanl network and then a little pop up pops up and I click on the connect bottun and it connects in about 15 seconds pretty easy! I know for USB you have to open the WMDC connection settings and uncheck allow usb connections.
Thanks
Cheers for that, I'll give it a go, although to be honest I've been trying it all afternoon..
I get the connection but no Internet connection..
Help Still needed
Ok, the plot thickens, I found drivers on the HTC Europe site to connect your Hermes to Vista.
I uninstalled all of the previous active synch hardware and also thre previous modem
When I plug the phone in it doesn't open the new downloads.
Any ideas, I'm running Windows 5.1, is there an official Windows 6 I can update to?
Some help with Macbook
So the instructions are great but how does it work on an Apple Macbook? I've searched through the forum many times without any luck. Any ideas on how to connect via USB and/or bluetooth?
elnino132 said:
So the instructions are great but how does it work on an Apple Macbook? I've searched through the forum many times without any luck. Any ideas on how to connect via USB and/or bluetooth?
Click to expand...
Click to collapse
Search, then you'll find.
It is ok for me using 10.4.10 with USB via MissingSync.
http://forum.xda-developers.com/showthread.php?t=302977&highlight=MissingSync
this may help...
For anyone having trouble getting their laptop to recognize the 8525 as a modem this may be the solution.
http://www.terranettech.net/DisplayPg.aspx?codeid=1128
my phone was working fine but when I tried to set my wife's up to tether it wouldn't show new hardware found when plugged in and when I tried to manually install the driver the process bix just kinda stalled out and wouldn't go forward with the driver even though I had browsed to the right one. I had to uninstall the driver which was viewing the phone as a serial device. if you're having this trouble then try following te directions in the link above. it worked for me...