Related
Hey Guys,
I'm new to the PPC,where i just bought a K-Jam and installed activesync 4.1 on my laptop (winxp sp2).
i have also a bluetooth dongle (MSI) and it seems to be working fine with me, i can connect my kjam to the laptop to syncronize my data.
now when it comes to using the internet via my laptop, i'm lost
i've been reading all threats which confused me when setting up the connection and i'm still not able to work it.
please if anyone can help me step by step , i'll be thankfull
thanx in advance.
I have noted by Bluetooth experiences with connecting my Xda Exec to my Home PC internet connection. It took me over a weeks worth of shouting & frustration to get this working as I ended up falling down every pitfall you could fall down! :evil:
Anyway, take a look here:
http://www.xda-developers.com/viewtopic.php?=42488
GL
Andy
all you need to do is discover your device and connect to the dial-up networking connection.....
once that's done it's just a matter of getting the correct phone number, username and password (if applicable).
In the US for T-Mobile the phone number is *99# and there is no user name or password.
dear underwurld
thinks for your fast response and for trying to help, not sure if the link is working at the moment , i've tried to open it several times.
lvlolvlo,
i donot think it can be that easy, i came across alot of threats were all about the activesync and ports and network connections , what made it more complicated.
any help..?
Oops sorry about that....
Missed a bloody 't' out try again:
http://forum.xda-developers.com/viewtopic.php?t=42488
@lvlolvlo... DUN connection via TMobile.... erm I didn't go anywhere near that
:shock:
@freeway
i donot think it can be that easy, i came across alot of threads were all about the ActiveSync and ports and network connections , what made it more complicated.
Click to expand...
Click to collapse
EXACTLY: Nail. Head. Hammer!
This is EXACTLY what my thread explains - I have combined & condensed so much **** you wouldn't believe.
Andy
Dear Underwurl,
i would like to thank u for these amazing information and references , however ( to tell u the truth) it is still confusing to me..
i thouhgt there might be any guidelines where i could go through steps
1-
2-
.
.
and so on...
i think i have no problem connecting my device to the laptop ( not through the dialup thing but through the activesync 4.1 and it says connected in both)
also all reference were talking about incoming ports and outgoings ones which doesnot exist in activesync4.2 ( i know it might exist on 3.8 ver)
1- if it is somehow connected to the activesync, are there anything to be configured for the proxy server , and how ( i'm using my office lan)??
2- when it says connected i try to open IE but all i get is page is under construction...what does that mean???
3- is it something related to the bluetooth (msi) driver or ghosted ports??
u c....i'm going randomly considering all these thoughts, which is confusing me alot...
will appreciate any help...
OK....
So, just to be clear:
Have you installed those nice WICOMM Bluetooth services installed on your PC?
Andy
PS
Do you have WiFi in your office???? Bin Bluetooth if you have!!!!!!!
yes, I installed the BT software that came with my BT dongle
it shows widcomm in my driver data
and no idonot have wifi in my office
what do u think?
while connected with my laptop via activesync, i checked the tcp/ip setting with pocket mechanic, it is showing a different ip address than the one in my laptop connection (LAN connection),
but showing a correct host name
and it says " Local area networks cannot directly communicate across wide area networks because they are defind by a private class of ip's"
any idea?????
when i open internet explorer on my kjam it says "page not found"
is it that difficult for you guys,
no one have gone through this before??
Hi
I want to use my XDA2i to connect my laptop to the net....
Any ideas how to achieve this, thinking bluetooth laptop to XDA then use GPRS on XDA to connect.
Thanks
Hi,
Look overhere ftp://xdaupload:[email protected]/USB_modem/ for modem driver & documentation.
Cheers, M
Hi
Thanks for the reply, however, I want to connect my laptop through bluetooth to my XDA and use the GPRS on my XDA to connect to the net.
I need to achieve this without using a USB connection, if I understand correctly the link you supplied tells me how to connect USB modem etc.
Maybe I'm completely misunderstanding. It's all so simple using a Nokia 6230i, plug and play virtually!! (until my company deactivated data calls:-()
Any help would be appreciated.
Thanks
Set the Connection Type to Bluetooth in the Wireless Modem program, then push the start button & make the BT connection to your laptop. Hope it works this way or experiment a little with it pls. I use the USB connection & don't have BT on my PC, so can't try the settings myself.
Regards, M
As I assume that you're using Windows vom Micro$oft, just Pair the two devices (not using 'Wireless Modem').
It will automatically install a Bluetooth-Modem
David
Hi
What type of connection do I need, I can only find a network access connection to my laptop, thats all that is available.
I am using a HP laptop with XP home, its a new one so would imagine everything is in order.
seek and you shall find
http://forum.xda-developers.com/viewtopic.php?t=24383
Thanks for the replies people...
Although I have to admit I'm struggling still....given up on the bluetooth connection and reverted back to USB cable but still I can't connect.
Here's the steps I have used:
Unticked Active Sync allowing USB connections.
Restarted laptop, connected USB cable to XDA and selected Wireless Modem, used the drop down to select USB and selected Start.....
the documentation etlls me that my laptop will go into a plug and play routine of allowing me to install it as a modem but this does not happen.
And yes, I have admin rights on the laptop.
Do I have to do anything with connections/modems because I haven't.
Am I being thick? Not sure but it's driving me to distraction...
start the modem program on your XDA (Start-Programs) and conenct it, windows will ask for a driver. install the driver from ftp. then create a new modem connection in windows. here (in germany) the number windows must call is *99# (for GPRS/UMTS)
Thank you for your patience...
The XDA installed as stated using driver on FTP, great.
Run up IE, tools, options, connections and added a dial up connection called XDA USB Link.(com8)
Settings of which are:
user name2web
passwordassword
untick automatically detect settings
untick configuration script
untick proxy server
Not sure where I'm going wrong but when I dial it errors with...No dial tone detected.
To recap I am dialing with GPRS connected on XDA and the WModem program connected through USB started
Am I missing something?
Can anyone help??????
Please?????
Try running usbmodemdialer instead of DUN by IE, it's in the package on the ftp.
Cheers, M
Hi
OK, I am now using the HTC USB dialer but I'm receiving an error 734 code, which is a PPP issue.
To recap, I am starting Wmodem, connecting to laptop (GPRS off) using a USB cable. Starting HTC USB Modem with APN as Internet & modem as HTC USB modem.
On XDA I get a connection light, then send and receive lights flash before the lot dissapear. The laptop goes through Connecting/verifying/registering then Remote access error 734.
I'm nearly there...
Please excuse my ignorance on this subject :roll:
Thanks
Yeah seems like it again :--(
Upload is running to ftp://xda:[email protected]/Uploads/
Regards, M
Hi
Ive done everything as suggested but I'm getting a 680 error, this I believe is a "no dial tone" error.
Please, where am I going wrong?
Thanks
Gary
Frankly I haven't got the slightest idea what's going wrong. It works like a charm with my magician & Windows XP Sp2.
M
Hm how could the line be busy? are you phoning the same time? (always when you try to connect? sorry silly question.)
Are you sure your provider give you GPRS Access? (i don't know any who don't )
did you a google search on this error?
Hi
Yes, I googled it and it appears to be "No dial tone" not line busy....I'm not in a call when attempting to connect.
I've tried every possible combination of settings......usernames and passwords etc....
There isn't any issues with my laptop and updates etc. I am sys admin by day!!! This is just beating the hell out of me. Incidentally my laptop is a HP pavillion zd8369ea, a new one!!! Alpine is running radio 1.04.
Yes, data calls are enabled on my SIM, I can connect perfectly to IE on XDA and mail etc.
Taken down all firewalls etc and nothing....
Help
Thanks
Gary
Follow the instructions here:
http://www.seeo2.com/html/HowToUse/XdaII/How to setup Wireless Modem for Bluetooth.htm
At part 5. the line you need is:
AT+CGDCONT=1,"IP","mobile.o2.co.uk","",0,0
At point 11. you don't need a user name or password.
I want to setup my P3600 (English ROM) as a 3.5G modem for my PC but not successful yet. The Telco service staff has no idea too and pass me a manual for dopod 838 pro. The mentioned programs are not there, nor in my dopod D810 CD.
I can:
- Activesync using USB
- Activesync using bluetooth
Question:
- Should I use the same HTC modem dialer on my PC for XDA?
- Should I use the Start->Program->Internet Sharing?. It allows me to choose bluetooth or USB to PC but both not working too after connect.
Anyone successfully connect their PC via P3600 using HSDPA, pls share the steps. Many thanks.
Eventually, I figure it out myself.
Forget all the HTC modem dialer or wireless modem program as in Xda.
1. Start->Program->Internet Sharing on WM5.0
2. Select the connection type: USB or BT
3. Select "Connect"
4. Then connect the USB and done.
For BT, it would have instruction for you to start PAN now. done.
Woo, it's much easier than the HTC dialer. But now my problem is VPN problem with my telco.
Thanks very much for reporting this info back, it will come in useful when I get my trinity!
mobiler2 said:
Eventually, I figure it out myself.
...
Woo, it's much easier than the HTC dialer. But now my problem is VPN problem with my telco.
Click to expand...
Click to collapse
just 2¢...
Sadly, because Internet Sharing is actually a NAT server running on your phone, it could prevent you from using 'classic' VPN. You can find more details by googling for 'VPN over NAT'.
for VPN purposes you can always use old good wireless modem mode. it works well.
I don't think it is related to NAT. As long as the VPN ports are opened, it should work. I am using a Wireless router at home and no trouble at all for using VPN under NAT.
Checked with telco. They can enable it for me with extra charge/month. and also the traffic would be charged as expensive GPRS plan. What kind of service!!!
Think twice before subscribing. I used "WonToFee / 1-1-" . The sales that say it can work for VPN may not even know what a TCP port is.
Anyone has use VPN over HSDPA with another telco? e.g. SMOOTH TONE
Hello,
This thread is a bit old, however I think it is related to my problem: I am trying to use Internet Sharing on my P3600 (ROM 1.23.405.2 / Radio ROM 1.38.00.11). Using BT, it works just fine. However, when connected on USB it works fine only for the first time. When I tap "disconnect", the HSDPA connection is stopped, but the status keeps displaying "Connected". There is now way to use Internet Sharing again before a soft reset (Windows XP wouldn't even recognize the P3600 again). Is this a known issue? I have googled a bit, but I haven't found any similar problems.
Thanks!
shefful said:
Hello,
This thread is a bit old, however I think it is related to my problem: I am trying to use Internet Sharing on my P3600 (ROM 1.23.405.2 / Radio ROM 1.38.00.11). Using BT, it works just fine. However, when connected on USB it works fine only for the first time. When I tap "disconnect", the HSDPA connection is stopped, but the status keeps displaying "Connected". There is now way to use Internet Sharing again before a soft reset (Windows XP wouldn't even recognize the P3600 again). Is this a known issue? I have googled a bit, but I haven't found any similar problems.
Thanks!
Click to expand...
Click to collapse
Hi shefful,
I have had the same problem. I have come across a possible solution while browsing forums. When you need to disconnect press and hold down the red end call button for a few seconds and this disconnects the modem. I haven't tried this yet but it's worth a shot.
regards
Adam
shefful said:
Hello,
This thread is a bit old, however I think it is related to my problem: I am trying to use Internet Sharing on my P3600 (ROM 1.23.405.2 / Radio ROM 1.38.00.11). Using BT, it works just fine. However, when connected on USB it works fine only for the first time. When I tap "disconnect", the HSDPA connection is stopped, but the status keeps displaying "Connected". There is now way to use Internet Sharing again before a soft reset (Windows XP wouldn't even recognize the P3600 again). Is this a known issue? I have googled a bit, but I haven't found any similar problems.
Thanks!
Click to expand...
Click to collapse
Hi shefful,
I have had the same problem. I have come across a possible solution while browsing forums. When you need to disconnect press and hold down the red end call button for a few seconds and this disconnects the modem. I haven't tried this yet but it's worth a shot.
regards
Adam
Hi adamwolfe,
Thanks for your help, unfortunatelly this is not the solution to my problem. The GPRS connection ends (according to the icon on top of the screen), but the status keeps displaying "Connected". The application stops responding and can't be stopped from Settings/Memory/Runnning Programs.
Hi shefful,
Yeah, I have the same problem too. Looks like the program freezes in the Connected status. Even tried terminating Internet Sharing with Start/Settings/.../Memory/Running Programs and relaunching Internet Sharing.
Sometimes I get a popup message saying the remote host has terminated the connection before the program hangs. I think this may be the cause of the problem. Which mobile operator are you on?
Rebooting is the only solution so far. Fortunately the Trinity reboots in 20 seconds - one of the fastest in the PPC market I think.
Hi ayhansan,
For other reasons I needed to hard reset my Trinity and the freezing problem has disappeared. I don't know what had caused this problem, I just hope it won't happen again. If I disconnect the USB cable, the status changes to "disconnected" and I can always reconnect.
same problem here
i am connecting to laptop thru USB
after I disconnect UMTS phone syaing still connected
and want kill Internet Sharing
???
thanks
regards
mobiler2 said:
Eventually, I figure it out myself.
Forget all the HTC modem dialer or wireless modem program as in Xda.
1. Start->Program->Internet Sharing on WM5.0
2. Select the connection type: USB or BT
3. Select "Connect"
4. Then connect the USB and done.
For BT, it would have instruction for you to start PAN now. done.
Woo, it's much easier than the HTC dialer. But now my problem is VPN problem with my telco.
Click to expand...
Click to collapse
does this work with Mac as well?
Like already write, I'm looking to helps ref a singular problem in my ppc branded SB but with sw THC in english - I was buy it in thailand one month ago and until 20 of december everythink was ok, but...
I found that the ROM contain the: HTC TyTN 1.18.255.106 ExtROM WWE
The NETWORK MANAGER show me that the tytn is CONNECT to WIFI access point but in the CONNECTIONS always appear no any presence of WIRELESS SERVICE that I can select to use for browse my server , internet and/or skype call
If I use the usb connection there is connection, same by umts and gprs services
Really I don't unterstand what's happen!
I was already many time doing the hard reset but nothing is change!
What you think about?
May be that there are corrupted files that avoid to install few commands?
Regards Freddie
There are the other part of sw that are install in the device by the manufacturer or seller that are not include inside the rom place?
Thanks in advance for your helpings
Black Eagle
go to setting >connections>network cards>
then
you will see a bunch of access points
when you see the one that says available
hold the styles down on it
tap connect
and you should be ok
also check the drop down menu on the bottom of the page
make sure its on both access points and whatever else it says
and also disable the cingular proxy
start>settings>connections>connections>setup proxy server>uncheck the uses proxy server to connect to the internet box
Sorry may be that I was wrong explaine you:
1. in the setting>connections>network cards = no problem my tytn find the access point and after my prompt connect without problem.
2. the problem is in the setting>connections>connections>advanced>select networks>my ISP>edit ... = where there are no tracks of the wireless network available to be select, in way to use the wifi connection that in setting>connections>network cards is ON
I wait your reply thanks
Black Eagle
black eagle,
I think I've undertand your question...
If you have found the WiFi access point and have gotten conected, there is no need to set a conection for that access point;At least, for me that it's not necesary.
When I go to a public place with wifi, or in my home LAN, just let the connections settings to "My ISP" without any changes (no new modem, nothing at all) and thats all, you can surf the net.
regards;
mablan
my problem solved
hi mablan,
thanx very much, fortunately i searched the forum for wifi and got ur post.
i too had the problem of getting good wifi connectivity over my adsl router witg my prophet( O2 neo) but not able to surf net in PIE. when i selected network as "My ISP" it all gone and now i am able to surf my adsl on neo, without any prblem.
thanx once again.
now only problem arises of autometically shifting/choosing of network for wifi and gprs. i remember it is stated somwhere in forum, i will make a try.
Hello mablan,
thanks for your interesting in my singular problem.
I understand what you mean but is not my case, even if my ppc in the setting>wireless lan>advanced>status result connected to the network, I cannot surf internet.
If I go to setting>networks cards i find my home hotspot that result waiting to connecting but ... always not connected
= in the wireless lan I am connected but in the network cards my connection don't exist - also in the connections>connections there is not the choice to select wireless network, don't exist
Hi BlackEagle, now I undestand your problem.
I'm sorry, I don't know what could be the cause of your problem.
Just a dumb question: Have you try to change the settings of your wireless network? I mean, in settings>connections>networkcards tap the name of the wn you want to use and change the settings of the Network key and 802.1x tabs...
If I found arround someplace something that can help you will let you know
regards and hope you find the answer..I'm sure someone here at the forum will help you
mablan
The Wifi Problem Is Now Solved
Hi friends,
I have find the cause of my problem all was in the .NET CF too old
after install of .NET CF 2.0 my problem was end
crazy that my problem was just an old driver
In any case thanks to all that just reply my questions
BLACK EAGLE
Hello I have the same problem, my wireless connection is there, I try to connect and it goes unavailable!!!!
I changed my tytn system from japanese to english but it was working just fine before. after for the first 2 days...
Now even when I reset it to Japanese S.O. does not connect to wifi only GPRS3G!!
Maybe too many hard reset???
What is .NET CF??
Maybe I should try that?
I have a lot of network cards in the list
IEEE 802.11b/g Compatible Wi-Fi Ad...
NE2000 Compatible Ethernet Driver
Virtual Ethernet Intermediate
Remote-NDSI Host
PPTP NDISWAN Miniport
L2TP NDISWAN Miniport
Microsoft null Ethernet Miniport Driver
????????????????????????????????????
Which one shuold I choose????
????????????????????????
Hi,
.NET CF2 is the microsoft.NET software that can you download from msoft website:
http://www.microsoft.com/downloads/...cb-4362-4b0d-8edd-aab15c5e04f5&displaylang=en
download it 22,6 mb and with your device connect by usb install it, when you start the installation, it find your device connect and install just the appropriate drivers, not all the sw
Black Eagle
Thanks Black Eagle I`ll try that!
BLACK EAGLE said:
Hi,
.NET CF2 is the microsoft.NET software that can you download from msoft website:
http://www.microsoft.com/downloads/...cb-4362-4b0d-8edd-aab15c5e04f5&displaylang=en
download it 22,6 mb and with your device connect by usb install it, when you start the installation, it find your device connect and install just the appropriate drivers, not all the sw
Black Eagle
Click to expand...
Click to collapse
Black Eagle
This installable is for computer, its not for a mobile device. The microsoft webpage does not say this is for Windows Mobile OS.
KTyTnUser, check the date of the last post so as not to make a fool of yourself. It was almost 2 years ago....
ultramag69 said:
KTyTnUser, check the date of the last post so as not to make a fool of yourself. It was almost 2 years ago....
Click to expand...
Click to collapse
so?
i am having the same problem with windows M 6 so looking for solutions. how does it matter if someone else faced the same problem 2 years ago?
Its relevant because MS may not be offering the same software to download. I've noticed that some of the older solutions aren't any good for certain things anymore as the apps no longer work for the OS I'm using or that the app, though easily found a while ago, is no longer supported by certain sites.
2 years is forever in the computer world....
probebly this is a stupid request , i am struck with a auto connection to internet option when i connet usb to my computer , i do not get the htc option sceeen any more , now i am not able to sync to my pc or use memory card, please help
Go to Start Menu...Settings...Connections.... USB to PC and then select Activesync.
You can also re-enable the ask me every time option if you like.
thanks tried that .. still does not work
thanks guys , problem solved after restarting my pc
it dosent work for me.... i cannot connect my HD to my Computer. he always wanna start the internet shainrg... please help!
ActiveSync does not allways works properly with all computers. You could try Start Menu...Settings...Connections.... USB to PC and then uncheck the first option after ActiveSync (something like 'activate advanced network functionality' -I am sorry but my OS is in Spanish-).
I had to do this in one of the PCs I sync with HTC HD, though in other case it synced with no problem.
hmm its worked, but the internet sharing are starting too...
hi i have same problem with automatic start internet sharing... It is some solution for me how disable opening internet sharing after connect to usb?
No matter what I do, I can't get rid of this either... Any more thoughts?
Thanks,
m
This problem seems to have cropped up on at least 3 different threads, and with no sensible fix so far!
I am having problems on my stock Rhodium WWE, where I used to get a choice of AS or Storage card as mass storage, now I just get the internet connection sharing screen.
I have tried the various other fixes presented, but no luck so far.
same problem...
hxxp://forum.xda-developers.com/showthread.php?t=649963
here too.