Database Users

LumpiStefan >>>>> PLEASE HELP

I purchased a Siemens SX56 and it will not power t has black lines all across the screan. I can get it 2 boot Wallaby Bootloader and run all test, i can get it 2 try 2 boot from sd card ( I do not 1/2 any back up info on it )
DO u think its the battery.
Where can i get a bootable sd card?
any help will be appreciated.
thank U
Adrian Henrnadez

You need to go to lumpistefans kitchen, build a rom and choose sd card flashing from the menu at base of screen, once you download and unzip the file, you will need xdatools, choose the unzipped file as source and choose your sd card as destination from the drop down, this will be the drive letter assigned to your card through a card reader writer, once the sd card is created as a bootable device just put it in the phone, push reset while holding power and then push the centre of the 4 way rocker when asked if you wish to proceed.

Thank u Sr
Tomorrow will go 2 rat shack and get me a card reader and try.
will it fix the screen problem all balck lines.
thanks
adrian
:?

Do the black lines show in bootloader?

Lines
No the bootloader runs thru ok i can even do test 2 all the sd card screen , ect ect
thanks fast respond
adrian
:shock:

I GOT IT!!!!!!!!!!!!!!!!!!!!!!!!
I got it 2 work thank u sir.
The only thng that the phone is asking me 4 the sim unlock code any sugestions of what 2 do.
thank U

Re: I GOT IT!!!!!!!!!!!!!!!!!!!!!!!!
Adrianx99 said:
I got it 2 work thank u sir.
The only thng that the phone is asking me 4 the sim unlock code any sugestions of what 2 do.
thank U
Click to expand...
Click to collapse
You have to unlock your phone.
What version of rom have you installed?
You can try the xdaunlock tool for unlocking.
Check this:
http://wiki.xda-developers.com/wiki/UnlockWiz
HTH
Stefan

I 1/2 unlocked it
I 1/2 no success with phone signal has no signal. I believe it is now unlock what do i need 2 do 2 get signal on my phone.
thank U guys
the web page rules
adrian

Re: I 1/2 unlocked it
Adrianx99 said:
I 1/2 no success with phone signal has no signal. I believe it is now unlock what do i need 2 do 2 get signal on my phone.
thank U guys
the web page rules
adrian
Click to expand...
Click to collapse
Check the label on the back of your device if it's writen PW10A1 then go to bootlader and change the Gsm frequency to 900 or 1800 Mhz depending on your gsm provider or if it was PW10B1 change it to 1900 MHZ.. good luck now

HOW DO MAKE CALL DURATIONS BACK TO ZERO

Hello all,
The subject is pretty self explanatory. Is there any way of making the incoming and outgoing call durations zero ?
If yes, please do let me know.
Thank You,
Regards,
K Thakur

Try This
On my XDAII, you could reset the calander during a call (backwards) and it would subtract time off of the call counter. Be sure not to go back too far. I don't know if it works on the Universal, but it's worth a try. Just calculate how far back you want to go, make a call, and while the call is in progress, reset the clock.
YMMV
Good luck
Panabax

Thanx
Thank You so much.. will try & let you know buddy...
cheers,
mOrph

morphosin said:
Thank You so much.. will try & let you know buddy...
cheers,
mOrph
Click to expand...
Click to collapse
does it work?! What do you mean "reset the clock"?
Thanks

Take off SIM card. put in any SD card
open BL.
open mtty and connect with your pda via USB.
Press Enter
USB>
rtask b "press enter"
a[email protected]=270f,270f "press enter"
call durations will be 0

czaderx said:
Take off SIM card. put in any SD card
open BL.
open mtty and connect with your pda via USB.
Press Enter
USB>
rtask b "press enter"
[email protected]=270f,270f "press enter"
call durations will be 0
Click to expand...
Click to collapse
I tried, but it does not reset the counter

alex_time said:
I tried, but it does not reset the counter
Click to expand...
Click to collapse
Maybe because I have bootloader 1.2 and this works only with 1.0 boot loader. Do you know can I downgrade to bl 1.0?

Hard reset solve u problem, for me it works in MIO A 501

Imei-Check unlocker reverse

I am going to unlock a MDA compact 3 with the imei-check unlocker and I was wondering if I could help to make a free unlock tool....
So which tools do I need...

Start here, and read the whole thread accurately:
http://forum.xda-developers.com/showthread.php?t=280819

SIMLock
So is this nice little Programm you developed in so many hard steps also capable of unlocking the new HTC Artemis (MDA Compact III)?? I would need to know that before bying such a nice device.
On the Homepage of the IMEI-Check the Artemis is cracked with the exact same programm you can download there, but i don't feel like paying for the Unlock key ^^ I read the whole Thread in the Hermes Forum but the Artemis isn't mentioned there, so i wonder if this C3v1Unlocker will work with this Key Unlock key you posted because this Key is surely computed for a Hermes based device... Answers appreciated And thanks for your Great work!

Samson711 said:
So is this nice little Programm you developed in so many hard steps also capable of unlocking the new HTC Artemis (MDA Compact III)??
Click to expand...
Click to collapse
no, it patches the Hermes radio will not be valid for Artemis... although should be a very similar patch, because both devices are quite the same.
Samson711 said:
i wonder if this C3v1Unlocker will work with this Key Unlock key you posted because this Key is surely computed for a Hermes based device...
Click to expand...
Click to collapse
The "unlock key" is only valid after patching the radio.

Ah, okay, i see. Is anybody already working on a Radio Patch for the Artemis? I imagine, if the Radio is patched, it should be possible to create a similar Program for the Artemis, once someone gets a key for his Artemis IMEI, or am i wrong with that?

I've been investigating about this, it is not correct what I said previously: the patched radio method used in Hermes or Universal will not work on Artemis.
On Artemis (and other OMAP based devices) the SIM & CID lock area is stored encrypted on Disk-on-Chip (DOC), on the first block of binary partition 1 which can be accessed with pdocread.
I guess imei-check reads this area and patches it (probably they have to load a "fake" bootloader in RAM first to get SecLevel=0, as they did with the activesync part of the Hermes unlocker).
I don't have Artemis and can't do much more, but if someone is interested in researching I will be watching this thread and try to help, so feel free to post tech questions here if you are serious about writing a free unlocker for the Artemis.

thagangsta said:
I am going to unlock a MDA compact 3 with the imei-check unlocker and I was wondering if I could help to make a free unlock tool....
So which tools do I need...
Click to expand...
Click to collapse
have you read this tread ? -> http://forum.xda-developers.com/showthread.php?t=274860
I have "reconstruct" what actually that utility do. Actually utility uses ITSME utilities to access phone, but on exactly adresses. First it reads some area form RADIO of the phone to the file. That area is 16K large and contains IMEI.
pdocread.exe -n 1 0x040000 0x4000 -b 0x4000 "pdocread.dat"
After that in temp file pdocread.dat at addresss 0x300C - 0x3013 is stored IMEI. One digit is for some CRC check, I think CRC8 but didn't check at all. So that "IMEI Wizard" changes IMEI in file pdocread.dat, calculates and changes CRC digit, and writes file back to the RADIO of the phone with command:
pdocwrite.exe -n 1 "pdocread.dat" 0x040000 0x4000 -b 0x4000
So simple and working.
When it doesn't work ? It doesn't work on new G4 phones, even WIZARD and PROPHET. It works on the same phones, but with old G3 chipset. And phone MUST be CID unlocked and RAPI enabled. The reason ultility fail to work on new G4 phones is that pdocwrite is not ready yet to work with that phones. I am looking for utility to change IMEI on P3300 (Artemis i think) or S200 (PROPHET) too.

IMEI Change?!
The "older" HTC Devices can all be unlocked without changing the IMEI i think, there has to be a way to unlock this phone without changing the IMEI of the unit. Apart from the unlocking process being illegal already, changing the IMEI of a Celluar Phone is even worse Maybe i got your post wrong and you do not intend to really change the IMEI, i dunno...

Samson711 said:
The "older" HTC Devices can all be unlocked without changing the IMEI i think, there has to be a way to unlock this phone without changing the IMEI of the unit. Apart from the unlocking process being illegal already, changing the IMEI of a Celluar Phone is even worse Maybe i got your post wrong and you do not intend to really change the IMEI, i dunno...
Click to expand...
Click to collapse
I DO intend to change IMEI. Who do you think are ? My mother ? What's next ? To pull my ears ?
Yes, we ALL know consequences from changing IMEI. And we ALL read well-written topic about it >> IMEI changing is going to get you sore!. << Did you ?
And did you know that is some countries you just MUST to change IMEI to use your phone ? I will save your time for searching and point one of hundreds topics about this >> To all TURKISH fellows and others a must read story !!! <<. And because of this I can't upgrade to better phone ... for now.
So .. if you don't offer anything constructive but just criticism - please, go to flame on some other topic. Or better - just shut up.

serious business!
Kircho cool down and tell me something
I may be coming to Turkey early next year (January, maybe). Please confirm that roaming with my current provider for a week is no problem? Or do I have to carry my receipt?

kircho,
Probably you've been confused because the company that sells SIM-Unlocker for the Artemis is called "imei-check", but we were discussing about SIM-Unlock here, not imei-changing.

Haha!
Lol, Kircho... how old are you??
I don't care what you do with you IMEI, believe me, i really don't! All i said is that i would love to have a method to disable SIM Lock without messing around with my units IMEI, thats all.
It was NO CRITICISM of your work, my knowledge with PDAs and Windows Mobile does not suffice to render any code to unlock a device and i am not flaming here. If this thing you figured out works for your device, thats cool and i am glad for you, i just wouldn't do it with my device, thats it...

victoradjei said:
Kircho cool down and tell me something
I may be coming to Turkey early next year (January, maybe). Please confirm that roaming with my current provider for a week is no problem? Or do I have to carry my receipt?
Click to expand...
Click to collapse
There is no problem with roaming. If your SIM card is issued by some forign operator like UK Vodafone or Dutch KPN - you can use any phone in Turkey with such card.

Pof
Do you know of a way to unlock extended rom on Artemis? I tried the wizard unlock. It appeared to work for a while but ultimately it has done strange things. The extended rom seems to be visible but not the files within...after a while even the visibility of extended rom is lost.
Thanks, a.

I again have a Artemis (dutch mda compact 3) and I can test with for 2 days...
Im gonna unlock it with the paid imei check software....
I have tried to enter bootloader but it won't enter...
How can I be helpfull to do make an unlock tool...

@apap: sorry I don't have an Artemis, and I don't know.
@thagangsta:
Have a look at this thread in order to understand how this was done in the Hermes:
Reverse engineering the HERMES imei-check unlocker
The bootloader commands for the Hermes are explained in these wiki pages, someone should start researching Artemis bootloader and put the commands on the wiki, it is very similar to Hermes.
Hermes Bootloader Information
Hermes Radio Bootloader and AT command interpreter
Some hints that may help you:
1. You can run the unlocker as many times as you want, it doesn't matter if you've already unlocked your device, the imei-check unlocker will behave the same.
2. In order for the USB monitor capture to be useful, you need to click on the "COMPLETE" tab and when you have captured it, export it as ANSI TEXT.
3. If the app fails (communication error) you need to create 2 admin users, 1 for running usb monitor and the other for running the unlocker. Use right click, "run as..." and then select the other admin user. You need to repeat this process several times until you can successfully get the log.
4. be careful on what you post here, as imei-check has intelectual property rights on their work. Do not "copy" their solution, but reimplement it in another way.

EHh Pof
Just read the thread for the hermes unlocking. I'm not a complete noob but i'm still stunned by the technical data.
Removed a unformiliar program a week ago called "- -" after canceling a imeicheck upgrade (had no valid .unl file)
Reading "First the imei-check unlocker transfers a CAB file to the device via ActiveSync which installs an application named "- -", which contains at least MIGsoft LTD security certificate (used to sign the NBH file with the bootloader upgrade) and runs some other stuff like this (not completed):"
This must mean the unlockers of the hermes and the artemis work in the same way.
Main Questions are:
Is an unlock for the Artemis using imei-check able to use SuperCID?
Which bootloader can we use that is able to flash all roms?
Which code can we use for unlocking.
Edit
I've found an crack for themida secured files. POF You've stated that the .unl files are themida protected could some people post their unl files.
Could be an easy solution......

Perjan said:
Removed a unformiliar program a week ago called "- -" after canceling a imeicheck upgrade (had no valid .unl file)
Click to expand...
Click to collapse
You can usb-sniff what is transfered over activesync without the need to pay for it, it is done before it requests .unl file. For sniff the rest of the process (which is done in bootloader mode without activesync) you need to pay for the unlocker.
Perjan said:
This must mean the unlockers of the hermes and the artemis work in the same way.
Click to expand...
Click to collapse
Yes, they must be very similar.
Perjan said:
Is an unlock for the Artemis using imei-check able to use SuperCID?
Click to expand...
Click to collapse
Yes, but it's not sticky (will loose it after 1st rom flash after applying unlocker). I have solution for this to make supercid sticky if you reverse the process.
Perjan said:
Which bootloader can we use that is able to flash all roms?
Click to expand...
Click to collapse
Most probably the earliest shipped bootloader version. See to which version of bootloader imei-check unlocker downgrades your device when run with the proper key.
Perjan said:
Which code can we use for unlocking.
Click to expand...
Click to collapse
You will see it when usb-sniffing the unlocker.
Perjan said:
I've found an crack for themida secured files. POF You've stated that the .unl files are themida protected could some people post their unl files.
Click to expand...
Click to collapse
Available cracks for themida are for older versions... this is not the way to go for sure, I also investigated and got nowhere.
About .unl files I don't know... I said exe unlocker file is packed with themida, never looked at .unl myself, I think its pointless because usb-sniffing is easier.
Good luck!

Just used the monitor with the unlocker but i'm not able to understand what it does and don't have a .unl file.
Here is the logfile ftp://xdaupload:[email protected]/Artemis/Mdacompac3_unlock_no_unl_file.ms2
Pof Could you help me further.

ms2 is not useful... export capture in ANSI text format please.
Edit -> Export and Save as type "ANSI Text files".

Anyone in this community able to answer this question? - EDIT! - problem solved!

After emailing back and forth with the HTC support team about the Leo's "too loud ear piece" and after asking me a million questions they finally sent me the Debug tool 3.4 to run it in my Leo and send them the logfile.
Well the stupid application it's been running for days and never seems to stop. It did create some 20 DM files on my SD card which can't be seen in explorer anymore. I put it into a card reader to see what's happening.
I hard reseted my Leo to stop the debugging tool but no use, I reflashed, taken out the sd card, but nu use the darn thing still runs and kills my battery! WIFI doesn't work either!!!
What should I do?
Please help!!!
G

hard reset
The only solution that always works

funny but not helpful!
thimiost said:
The only solution that always works
Click to expand...
Click to collapse
If you have the answer just give it to me! Trust me I've searched every possible forum!
Regards,
G

wmfreak said:
If you have the answer just give it to me! Trust me I've searched every possible forum!
Regards,
G
Click to expand...
Click to collapse
you must read carefully it is hard reset

he just told you m8 perform a hard reset on the device

I guess nobody read my post!
evo6 said:
he just told you m8 perform a hard reset on the device
Click to expand...
Click to collapse
If look carefully it does say that I've hard reseted, reflashed with different rom including cooked rom but same problem!!!
any help?
regards,
G

Format Your sdcard. the file must be on there if youve reflashed

Done that too!
fards said:
Format Your sdcard. the file must be on there if youve reflashed
Click to expand...
Click to collapse
I even swapped SD cards, formatted them you name it I've done it!
Please share your wisdom if you have an answer!!!
PS debug tool 3.4 is what's causing the problem!

Are you doing a hard reset without your sd card inserted?..
If the answer is yes, then try..
format your sd card, then flash a new rom using goldcard method.... it is virtually impossible for the file to stay storaged in the sd (after format) or the device (beacuse u did format it when doing the flashing process).

In makes sense but!
doctorcete said:
Are you doing a hard reset without your sd card inserted?..
If the answer is yes, then try..
format your sd card, then flash a new rom using goldcard method.... it is virtually impossible for the file to stay storaged in the sd (after format) or the device (beacuse u did format it when doing the flashing process).
Click to expand...
Click to collapse
I've reflashed even without SD (upgrade ROM 1.48 from 1.43) and the stupid and the Htclog folder is still iin File explorer under MyDevice working hard at creatinf log files!!!
I've tried to rerun the stupid Debug tool 3.4 but it says "Fail to read MFG area (6)" all the time!
I'm desperate! Pls Help!!!
G

wmfreak said:
I've reflashed even without SD (upgrade ROM 1.48 from 1.43) and the stupid and the Htclog folder is still iin File explorer under MyDevice working hard at creatinf log files!!!
I've tried to rerun the stupid Debug tool 3.4 but it says "Fail to read MFG area (6)" all the time!
I'm desperate! Pls Help!!!
G
Click to expand...
Click to collapse
I know hard reset should have helped, but try letting the phone empty and then remove the battery for a couple of hours-day, then try it agian.
Mabey I don't get the question but.. how come it's still working with the debugging tool while the phone is flashed? The debugging tool is prob. placed on a special sector of the main memory normaly not accessed by a rom, the program it self doesn't run from normal memory sectors, so you might have a try with a SPL update/overwright. If all fails send it back, why would htc give you this program? they allways say send it back and you'll get a new one?...

please post the tool, might give some insight after disasm. MFG area is interesting.
It's been written to special memory place.
Again, please post the tool you were given

how are you doing a hard reset?, are you using the clean memory tool software on your device, or are u pressing vol up and down simultaneously while powering on the device...... I just dont get how the program stays in memory after hard reset, even after flashing.

lucid said:
please post the tool, might give some insight after disasm. MFG area is interesting.
It's been written to special memory place.
Again, please post the tool you were given
Click to expand...
Click to collapse
yes, please post it.
if i "pdocread.exe -l" i find a 20MB-partition seperately.
could you post this part too?
okokur

Here is the tool! (BTW i fixed the problem)
okokur said:
yes, please post it.
if i "pdocread.exe -l" i find a 20MB-partition seperately.
could you post this part too?
okokur
Click to expand...
Click to collapse
I've attached the toll. I finally got rid of it by being able to rerun the program (which i prior tried a million times) and rewrite the parametres to "0" instead of 435 and 401. Give it a go if you know what you're doing and you can read log files.
regards,
G

You got rid of it. I edit out the post

Solution:
First backup your SD, after format with FAT32 .... reinstall your ROM and after insert your SD.

got dmmnit, glad u got rid of it, maybe we can learn how it.doez stick to the rom like that n use it in other apps like smartprotect. congrats!:

hi, do u mind sharing how u got rid of it?

I run this tool too, but after have no way to stop first try to read forum. Solution to stop program already is given from wmfreak. It is not need to make hard reset or to reformat SD card. Only things to do is to run program one more time and:
wmfreak said:
I finally got rid of it by being able to rerun the program (which i prior tried a million times) and rewrite the parametres to "0" instead of 435 and 401.
Click to expand...
Click to collapse
Thank you wmfreak

[ROM] T01A English Rom

Mod Edit: Donations should be requested in your signature only~TheRomMistress
XDA Forum Rules said:
8. Donations.
We appreciate all donations to xda-developers.com, it keeps our forum online and well maintained. As a user you're allowed to ask for donations in your signature as a thank you for your hard work. However donations up front are not allowed, this forum is about sharing, not about getting paid to do something, that's what your job is for.
Click to expand...
Click to collapse
Fully Charge.
Unrar SDDL.rar,copy all files to storage card
Unrar T01A_to_SP50_wm65-new_theduyet.rar and Create prg folder in storage card and copy enc file after unrar into it.
Remove the SIM Card
- Remove the black plastic tab under where the SIM lies
- Replace the battery
- Secure the battery - use Velcro cable tie, rubber band or sticky tape [vital it does not fall out while Flashing ! ]
- Short (connect together) Pin 1 and Pin 3; then press the Reset Button
- Hold for 10 seconds or so; then release
- Turn phone over and should show white Flash screen in progress until completed and says Successful - Rebooting
Link SDDL: http://t0a.duyet.com/SDDL.rar
Link Rom :http://t0a.duyet.com/T01A_to_SP50_wm65-new_theduyet.rar
Shorten pin Method
See Pic: http://img689.imageshack.us/img689/9964/img0023lp.jpg
To enter downloader mode bridge pin 1 and 3 and press reset. release reset and keep bridge for few seconds. DO NOT PRESS RESET AGAIN. check screen and see what happens.
Secure your battery with duct tape it can drop very easy. If you use short pin method it can drop while you turn phone with screen up. Since you will turn phone just after you reset it will be flashing bootloader and and phone will be bricked for ever.
Click to expand...
Click to collapse
This is the ROM file for T01A only(a japanese version of TG01) .It is made from UK ORANGE ROM for TG01 with modifying.It can NOT work with TG01 or X02T
If you like this rom ,you can make a donation for cedesmith *Link Removed* who found the key for decrypting

It works. Thank you...

i,i will need the unlock code to use my phone?because i live in japan and still gonna use docomo simcard

Following Cedesmith ,the T01A is still locked by docomo after flashing.
So you can continue to use your phone.

tks,I'll try to do it soom
Your phone is working great?Any issues?

mr.mike said:
Fully Charge.
Unrar SDDL.rar,copy all files to storage card
Unrar T01A_to_SP50_wm65-new_theduyet.rar and Create prg folder in storage card and copy enc file after unrar into it.
Remove the SIM Card
- Remove the black plastic tab under where the SIM lies
- Replace the battery
- Secure the battery - use Velcro cable tie, rubber band or sticky tape [vital it does not fall out while Flashing ! ]
- Short (connect together) Pin 1 and Pin 3; then press the Reset Button
- Hold for 10 seconds or so; then release
- Turn phone over and should show white Flash screen in progress until completed and says Successful - Rebooting
Link SDDL: http://t0a.duyet.com/SDDL.rar
Link Rom :http://t0a.duyet.com/T01A_to_SP50_wm65-new_theduyet.rar
Shorten pin Method
If you like this rom ,you can make a donation for cedesmith who made Tg01 tool and Cotulla who found the key for decrypting
Click to expand...
Click to collapse
Mr.Mike, I'll use your method description for a common post for everyone about how to flash a TG01 and link it from any ROM posted, I hope that doesn't bother you.

Works fine,i loved!
thanks a lot to all...

Mr.Mike, I'll use your method description for a common post for everyone about how to flash a TG01 and link it from any ROM posted, I hope that doesn't bother you
Click to expand...
Click to collapse
No problem...It doesn't bother me.
In this thread,i also use the content from the other users's posts

I can't conect to the docomo internet...How to fix this please?
Phone is working fine,but I don't know how to configure docomo network

Because your internet configuration is the configuration for Orange.So you should contact Domoco to get the information about this or you can "googling"
Beside that,you can use a program to automatic configuration as HTC Network Wizard.

Try this my friend
http://oldsap.blogspot.com/2008/04/network-wizard.html
I currently use the same version as from that link but my "about page" have no HTC logo.
If it doesn't work on your T01A, please tell me I will upload another file for you

Hi Tra,with your simunlock,Can you access internet as GPRS or 3G.
Now ,does your sim unlock work well?I think that maybe i need to buy another sim unlock...

mr.mike said:
Hi Tra,with your simunlock,Can you access internet as GPRS or 3G.
Now ,does your sim unlock work well?I think that maybe i need to buy another sim unlock...
Click to expand...
Click to collapse
Yes, it still works well. I get full signal bar instead of 3 bars.
Now I can still access internet through EDGE (it's 17 hours after I flashed your ROM). It ""may"" get 3G signal but I cannot test 3G because my carrier doesn't support 3G.
I think different ROM may somehow act differently to simunlock (just my theory).
I hope the signal will not lose shortly.
Some simunlock make a phone usable by telling that it is in roaming mode (I think you guys already known). My "3G" simunlock also works like that.
However, some simunlock tell the phone that it's used in China so every time you want to find your location in Google map, it always points you at some where in China (experienced from one of "i-smart phone" simunlock model but other models of this brand works well with Docomo's Touch PRO).Unfortunately, I don't know how to check and avoid from buying this poor quality simunlock.
....Just poped up in my thought. My T01A's radio version is 5005.1901.20.
I used to update every patch update from Docomo for Japanese ROM (I mean every update for 6.1 and 6.5) that may updated my radio. If your T01A radio rom has the older version from mine, try to find the way to flash back to Japanese ROM and update it before flash modified UK ROM.
Again, I may be wrong

tra33372 said:
Yes, it still works well. I get full signal bar instead of 3 bars.
Now I can still access internet through EDGE (it's 17 hours after I flashed your ROM). It ""may"" get 3G signal but I cannot test 3G because my carrier doesn't support 3G.
I think different ROM may somehow act differently to simunlock (just my theory).
I hope the signal will not lose shortly.
Some simunlock make a phone usable by telling that it is in roaming mode (I think you guys already known). My "3G" simunlock also works like that.
However, some simunlock tell the phone that it's used in China so every time you want to find your location in Google map, it always points you at some where in China (experienced from one of "i-smart phone" simunlock model but other models of this brand works well with Docomo's Touch PRO).Unfortunately, I don't know how to check and avoid from buying this poor quality simunlock.
....Just poped up in my thought. My T01A's radio version is 5005.1901.20.
I used to update every patch update from Docomo for Japanese ROM (I mean every update for 6.1 and 6.5) that may updated my radio. If your T01A radio rom has the older version from mine, try to find the way to flash back to Japanese ROM and update it before flash modified UK ROM.
Again, I may be wrong
Click to expand...
Click to collapse
what is roaming mode?

bird_9527 said:
what is roaming mode?
Click to expand...
Click to collapse
The phone will show a triangle on the taskbar when it detect that our T01A's used outside Japan. This is Roaming mode.
See my the second attatched picture.
http://forum.xda-developers.com/showthread.php?t=654373&page=4
In roaming mode, the signal is quite unstable (depends on various factors eg. phone, simunlock and the quality of your SIM).
What is your radio version?

OK。。。I see，my phone have no roaming mode....
my radio version is 5005.1901.20,too

Yeah, but I can't adjust the setting to use the GPRS function with my Mr.sim.And the signal is very unstable, only in city center, outside I will get "no service" meassage

Work with X02T too?
plz you know if this new way for flash the TG01 japanese will work with X02T too? or just with T01A?

You should contact to cotulla and he can find the encrypt key ,maybe the x02 rom is different with t01A... after that you contact cedesmith to add this key into tgtool...
and maybe you need to create a English rom for X02T by your self .It's not difficult....

have any way for check if the key or Rom will work with my X02T (TG01 by SoftBank)?