Related
last week i upgrade my xda to the 2003 versie
now i wanne go back
I've I tryed to "update" to the new XDA-Def. 1.2 then Flashprog stops after a few seconds and the Active Sync 3.7 stops to run...
A reset can wake up my xda, but no new developers rom .
please can somebody explane help how to rol back to developers v1.2
help
thx decodertje
Flash it by using an SD Card. Use XDArit and write the SERom 1.2 onto your card and flash it with the Bootloader.
I am writing up some documents regarding this. I will post them later today.
i just do wat u sad
and now my xda = dead
when i put it in the cradle it says unknown usb device
only the light from batterie is orange for the rest nothing
please help xda developers
what way did you use to upgrade to 2003?
i put the file 2003 from jef summers on a sd card
hard reset en instalt it
its works fine, but i like the xda developers rom 1.1 very much
then i want to instal v1.2 and i put the exe file from jef summers on the sd card .then i hard reset en instalt the rom,wait then it says compleet cold reset now ,thats wat i did and now its dead
and you only put and .nb1 on the card?
and left the 'bootloader' checkbox unchecked?
bootloader i also put a x
i think that was wrong right?
what to do ??
Hi!
I did the same but not the bootloader... 8)
But I've also the Problem to go back and
the 1.1 / 1.2 ist only an EXE and i could not burn
it on an SD card, right?
Stefan
yes. it is somewhat of a wonder that your 2003 actually works.
to fix a corrupt bootloader when you still have a working 2003. you would have to write a program to flash from ce. ( and figure out how to do flashing )
if your xda does not boot at all, take a look at jtag. maybe you can find someone who also does pda memory upgrades to do this for you.
i think u not understand me because my englisch
last week i upgrade my xda to the 2003 versie
now i wanne go back
I've I tryed to "update" to the new XDA-Def. 1.2 then Flashprog stops after a few seconds and the Active Sync 3.7 stops to run...
A reset can wake up my xda, but no new developers rom .
please can somebody explane help how to rol back to developers v1.2
help
that was the first problem to go back to v2.1
then i did
Flash it by using an SD Card. Use XDArit and write the SERom 1.2 onto sd card and flasht it with the Bootloader
i wait till it was finish.
the xda say compleet , en cold reset u xda . thats what i did.
but the xda dont work anymore.
when i put it in the cradle only the battery led burn.
windows xp say unknown device and dont regonice my xda.
when i put the powerbutton and softreset i dont see wallaby bootloader anymore??
what to do now
help me please xda developers
I think I do understand you, and that
if your xda does not boot at all,
Click to expand...
Click to collapse
is your current problem, and
take a look at jtag. maybe you can find someone who also does pda memory upgrades to do this for you.
Click to expand...
Click to collapse
is your only option left.
@XDA developer Itsme
thx for the help
i am lucky
there is a compagny in maarssen in the netherlands, its only 50km from almere, they upgrade my xda to 64 mb :lol:
do u now how the xda runs whit 128mb????
next week i go there and i let u know how it end
decodertje from the netherlands bye
Decodertje I'm from the Netherlands also and I changed back from 2003 to SE 1.2. So if you give me a private message I think I can solve your problem. And you can speak in Dutch then.
I'll explain in english what I did:
- Extract 'Jeff's SE 1.2 EXE' to an folder. (don't run it!)
- Then burn the NK.nbf found in the folder to an SD card with a SD reader (or MMC card/reader like I did) and put it in the device.
- Hold the power button and press the RESET switch.
- It will go into the Wallaby bootloader and will see the ROM on the SD card. Press the action button (middle position of the 4-way button).
It will load the new ROM and when it is finished (about 5 min.) press the RESET switch. And it will boot with the BEST ROM ever!
Hope this helps.
IMPORTANT
I forget something:
Burn the nk.nbf to an SD card with XDArit, but ONLY the Windows CE, do NOT select the bootloader!!!!
Aurora13
u got pm
@XDA developer Itsme
i just phone to the compagny
they say it is no problem to upgrade to 64 mb
but i lost my bootloader
and whitout a bootloader i can not flash the rom. correckt me if i am wrong.
do u now a way to put back the bootloader in the rom???
is it possible flash the walliby in my rom??
decodertje
Can you boot into the bootloader? (Hold power button and press reset)
no i can not come in the bootloader anymore
Then I'm afraid I can't help you and you have a real problem. The only way is the jtag way (see aboce for a URL).
i think i go buy anather ppc
what is a good ppc at the moment simuler to the xda??????
only faster and better
and whit many assersoires
thx for reply's folks
My MDA was unable to get back to bootload after a unsuccessful ROM upgrading. Is it possible to replace the ROM (hardware) so that I can save my MDA?
I tried the Power on key and softreset to reset it but only return to a messive screen.
Pls help. Thanks
cris...
you dont need to replace the hardware rom!!
try runing the upgrade program again, it sometimes picks up where it left off. if that dont work, try the SD card method.
i'd go into more details, but all that info is here in these forums already.
if u still need help though, contact me, and i'll try to help you.
good luck
Dear Ntabikha,
Thanks v much!
However, I tried the upgrade program many times and the decktop just said the computer cannot recognise the device.
So, I think method 1 is not possible.
For method two, I will try to put the nk.nbf file into my SD card and put it in the device and see whether the MDA can pick up the ROM. Will let you know whether it is successful.
BTW, when the screen is on, it only appears some fuzzy horizontal lines and two small empty boxes, have you seen this before?
Chris
yes, i had the same fuzzy lines. i fixed That problem via the SD card method.
just remember that, you have to write the nbf file to SD card, not just copy it to SD card
dont laugh, i did that mistake at first
good luck
How can I "write" it to the card?
I thought I only copy the file to the card through a SD reader.
Well, I know now, use rom kitchen to cook the rom and use osimagetool to copy the nb1 file into a sd card.
All i need to do next is to insert into the MDA and press power button together with softreset key for several times until successful....
Dear ntabikha,
I am still unable to obtain the bootloading screen of my MDA after inserting the SD with nb1 file written by xdatool. I tried many times power button and soft reset simultaneously (more than 20times) and the screen are still full of messy lines and 2 big empty boxes.
Can you help please? What is the fix broken bootloader in the xdatool?
I really did search around the forum but still can't be able to get back the bootloader screen. Pls help.
Chris
ntabikha said:
yes, i had the same fuzzy lines. i fixed That problem via the SD card method.
just remember that, you have to write the nbf file to SD card, not just copy it to SD card
dont laugh, i did that mistake at first
good luck
Click to expand...
Click to collapse
I'm wondering if you could not see bootloading screen , how could you use SD card to restore OS and bootloader ?
No, there is no bootloading screen at all.
I took the MDA out to a repair shop and they said that is a hardware failure. And they don't have the stock to replace it.
But I don't believe that cause I was just downloading the OS. It shouldn't hurt the hardware that much.....
chris_khho said:
BTW, when the screen is on, it only appears some fuzzy horizontal lines and two small empty boxes, have you seen this before?
Chris
Click to expand...
Click to collapse
I fixed couple such phones "horizontal lines and two small empty boxes" due to failure upgrading (all flash ROM messed up).
You have to use hardware flash ROM writer to wire the flash ROM pin to write bootloader and CE directly to chip.
I can help you to fix the problem (I'm in Canada, my email is [email protected])
Hi, I have similar trouble. My boss upgrade his MDA TMO (Austria) to official TMO version of OS and now it coming only to splash screen. MDA doesn't sync through cradle, doesn't seems to be charged, and I cannot enter BOOT mode for flashing ROM from SD card.
Is there any chance to fix it by myself?
Thanx, Ivan
TO CGIGATE: If you have any solution, can you post it here? Or it is so dangerous for nonexpert people? :wink:
Ivan said:
Hi, I have similar trouble. My boss upgrade his MDA TMO (Austria) to official TMO version of OS and now it coming only to splash screen. MDA doesn't sync through cradle, doesn't seems to be charged, and I cannot enter BOOT mode for flashing ROM from SD card.
Is there any chance to fix it by myself?
Thanx, Ivan
TO CGIGATE: If you have any solution, can you post it here? Or it is so dangerous for nonexpert people? :wink:
Click to expand...
Click to collapse
If you don't have a working OS and a working bootloader, the only solution is hardware solution. You have to wire the flash chip directly to the flash ROM writer ...
yes, it is dangerous for nonexpert people
Thank you CGIGATE for quick answer. Anyway I wrote you an email, could you be so kind and send me informations how I can do that, or where I can find these steps?[/quote]
in two day ago i post i cannot flash rom to 2003 but only 2002 that ok..
i repair infared and flash again ....now that's work for all of rom that kitchen have.....But now I have big problem to repair radio upgrade fail .... Help me please
At first I read this ...http://forum.xda-developers.com/viewtopic.php?t=4123&highlight=rsu+upgrade+error already but still cannot fix it pass 1%...upgrade fail
I have two model of my friends to repair
In first case.... I don't know version of radio this model before but i think may be he try to upgrade in 4.21. ...i test wallaby and That show gsm error on bootloader screen V5.17 .... I reset it and that show 3.14 and no radio...and g...then i press volume key until that show today screen...but no have start menu
That show blue color on top of screen ...but have owner name calendar and contact .... I cannot go to start menu coz cannot align sceen i try in 4-5 times but same...
I decide to flash rom to xda.ser12 by patch wallaby.... Finish.. cold reset...
It show front page of loader in xda-developers and 3.17.03 no s ..g same
But i can go to aligne screen and go to today screen....... I try to find Rsugrade.lnk and ...this
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUPgrade.exe
But cannot find .........????
I sync with pc..... That show screen in active sync... But cannot find...
I copy this file from pc
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUPgrade.exe
To card reader because i cannot sync with pc
I put a card in xda and copy 4 files to /windows ..... And run ... Rsupgrade.exe
That show ..radio stack upgrade but cannot pass 1% it's show fail press ok to reset ...
I try to do in same at 5 time and results is Same..... How can i do ... I don't know the way to pass 1%.....
2. In another model my friend he told me...
His O2 is rom 4.00.11ENG and Radio is 4.16
He want to upgrade to 4.21 .....
but he didn't up radio by use Program B to upgrade ...
He remove sim card and fully charge of battery.... And copy 4 files of Pc to xda by active sync ....
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUPgrade.exe
And he put out of cradle .. And go to start-file explorer and press rsugrade.exe
That make it go to radio stack upgrade screen.... 1%...5%....10%....and stop at half and hours.... He press softreset...and that show screen of ..test only not for sale..
4.00.11 but no have radio ...e press volume key to go today screen.... That ok. Not same as in one case that i wrote... He delete..
monitor_ul_bs.m0
monitor_ul_bs.map
RSUpgrade.cp64
RSUPgrade.exe
From O2 and reset..... Wait to go today screen..... And sync with Pc... Pass can sync with Pc... He copy 4 files from pc to xda by active sync... Put it of and ran...rsugrade.exe same...that i wrote cannot pass 1% same show upgrade fail press ok to reset and he try to do like this in 4 times but same result.....
I read this..... From this forum
lbazil wrote
Date: Thu Dec 11, 2003 03:32
I only have two things to add:
1. RSUpgrade _fails_ much more often without SIM card inside the phone;
2. Your battery should be fully charged (100%) before you start the upgrade, since if it does fail, the battery will stop charging, and the next time you attempt to upgrade, you may not be able to get past 1%, even if you have power adapter plugged in. If you happen to have another XDA, you could swap batteries, or use an extended battery, if you have one.
Good luck...
And MrDollyMaker wrote
I never do the RSUpgrade with a SIM in my phone.... Never failed unless I tried to do it with the EXE thing. But I do agree to make sure you have a full battery, but since it already is at the 1% error, you can charge it with the charger if you do not do anything when the error comes up. just let it sit and charge.
This mean i must charge battery in another and wait until show green led light in another O2 and swap battery to dead xda.... And ran rsupgrade.exe this way is make me pass 1% ????? Or not... I have no idea to repair it... Please somebody advice me to repair...
This is my trouble
1. Xda in first case can go to today screen and use pda.. But cannot sync with pc coz it's show cannot find .... And after try to another rom in 2002 or 2003...it hank and show blue color on top of screen ...but have owner name calendar and contact .... I cannot go to start menu coz cannot align screen ...but in xda-developers ser12 that mae me go to today screen and use file explorer
2.xda in second case can go to today screen,sync with pc,copy 4 files to xda by active sync but cannot pass ...1% i didn't flash os rom to another coz 4.00.11 can pass to today screen...
Please someone guide me to fix 2 dead xda for my best friends in my life.... I beg u..
Sorry to long story and very bad english...
And i hope for help ..... Best regard...
anybody ???????
any idea ? help me please
It looks like you have tried just about everything, rs 4.21 was the baddest of the bad when it was released, the tales of woe are endless where that radio stack is concerned. There is a person on this forum that can fix your xda but he lives in Canada and it may not be worth the trouble. I think his nickname is cgigate.
ok i will email to him or change mainboard
thx u for share idea i will email to him or decide to change mail board.... in my country a price of mailboard is ......1,150 us dollars.... that's expensive ? ........ last way i can do...
Re: ok i will email to him or change mainboard
[email protected] said:
thx u for share idea i will email to him or decide to change mail board.... in my country a price of mailboard is ......1,150 us dollars.... that's expensive ? ........ last way i can do...
Click to expand...
Click to collapse
Contact your dealer for the nearest repair centre. They will replace your radio with a new one using a special SD-card. This will work regardless of your current radio.
thx for reply me
but repsir center in my country is say only word... can't fix it u must change mainboard.... Dumb center........
now i can sync with pc
last try to flash rom in first case to 4.01.16 original roby t mobile....until finish i can go to today screen and align screen......and..can...sync dead xda in 1 case with pc...and copy 4 files to xda....run rsupgrade.exe...bad luck cannot pass 1% same in all lastest radio all of version
( asia,at&t,t-mobile)and when i flash back to another rom like a xda-developre ser 1.2 that cannot show align screen.... but jump to today screen without align screen ?.....and cannot sync to pc ...
i have 2 rom to bring me in today screen ...and use file explorer another rom except this make me hank on boot screen..//
1.xda-dev ser 1.2 cannot sycn
2.4.01.16 can sync but cannot pass 1% to upgrade
may be tomorrow i will trow it in a bin ....... thx for any reply
You need to replace the radio stack using a special SD-card, and your dealer (or a repair shop) should definitely be able to do this for you. This is the normal way for the service guys to do an upgrade, they won't rely on the USB sync to work.
I had the same thing happening to a friend of mine, and we got his device updated for free.
thx for reply
thx bamse ..... for reply but i think people in xda-dev.. so clever more than my repair center : (
hello all,
After spending some night to test on the xda1. I found that if your radio stack error, you can never get the radio stack fix in any way. So, don't try it because i waste your time. We can only fix it when we have the sc card radio stack fix by using the bootloader. (there is no way to fix it in window)
SX56 GSM ERROR YOU CAN FIX IT
In Some cases, you can fix this yourself, read this thread (last line of this post links to it), and try my solution, or PM me and I will make arrangements to fix it for you.
Too many people are getting this error, SIEMENS only wants your money, everyone is looking for an answer. It took some time, but I fixed mine, and I'll help anyone who needs it do the same for their SX56.
http://forum.xda-developers.com/viewtopic.php?t=10702
only sd update can help
Yes I totally agree that only SD update can help
but to do it we need at least some serial cable to xda
Where to find it or meyby anyone can post some schema of it
rgds
Lukasz
Yes. we need a man to help us how tho backup a radio stack in the sd card so we can load it in the bootloading mode. Please help us out!!!!
hoanghon said:
Yes. we need a man to help us how tho backup a radio stack in the sd card so we can load it in the bootloading mode. Please help us out!!!!
Click to expand...
Click to collapse
who can help??!!!! I have the same problem!
Can somebody make a ROM GSM on SD card?
Hi
I have searched the forum but cannot seem to find a way to reset my call durations. My free minutes and texts start on the first of every month. I was wondering if there is a software that can show me the call durations and also reset it first of every month.
Thanks
please help
hi
can someone please help me
thanks
hard reset doesn't work.
try using SK Tools - there is an option in there.
firstbuddha said:
hard reset doesn't work.
try using SK Tools - there is an option in there.
Click to expand...
Click to collapse
No, the SK Tools only clear the call history not call duration.Until now, I think there's no way 2 clear UNI call duration
Reset Call Duration Links
I saw these 2 links:
http://forum.xda-developers.com/showthread.php?t=232258
http://forum.xda-developers.com/showpost.php?p=1047379&postcount=124
I tried the method, but it does not work on my O2 Xda Exec. Maybe I did not carry out the procedure properly. Or, probably the method only works for certain earlier version of ROM.
Please try it out and post your result.
Got it working!
First, need to make the device (Universal) SuperCID by unlocking the SIM and CID (see the sticky thread on how, by Buzz. Thanks.).
Then, put the device to Boot mode.
Use mtty to connect to the device.
Enter to bring out USB>
Check if already SuperCID by using task 32 or info 2.
Enter rtask b
Enter [email protected]=270f,270f
The lifetime duration should become all zeros.
(I have shorten the description. You should do a search in the forum to get a full description. This hack is discovered by POF. Thanks.)
great work, though i have yet to test it out.
It's works, at least on my universal with bootloader 1.0. Thanks you very much!!
ttvt said:
It's works, at least on my universal with bootloader 1.0. Thanks you very much!!
Click to expand...
Click to collapse
CAN you point where you read the full description plz ??
uh oh, after the hard reset, the time returns back .
kimcng said:
First, need to make the device (Universal) SuperCID by unlocking the SIM and CID (see the sticky thread on how, by Buzz. Thanks.).
Then, put the device to Boot mode.
Use mtty to connect to the device.
Enter to bring out USB>
Check if already SuperCID by using task 32 or info 2.
Enter rtask b
Enter [email protected]=270f,270f
The lifetime duration should become all zeros.
(I have shorten the description. You should do a search in the forum to get a full description. This hack is discovered by POF. Thanks.)
Click to expand...
Click to collapse
my exec is sim free
but i cant get the rtask b
to work
i get some sort od sd error
any help???
frz
kimcng said:
First, need to make the device (Universal) SuperCID by unlocking the SIM and CID (see the sticky thread on how, by Buzz. Thanks.).
Then, put the device to Boot mode.
Use mtty to connect to the device.
Enter to bring out USB>
Check if already SuperCID by using task 32 or info 2.
Enter rtask b
Enter [email protected]=270f,270f
The lifetime duration should become all zeros.
(I have shorten the description. You should do a search in the forum to get a full description. This hack is discovered by POF. Thanks.)
Click to expand...
Click to collapse
my exec is sim free
but i cant get the rtask b
to work
i get some sort od sd error
any help???
frz
You need to have the SD card inserted. Also, make sure SIM free & SuperCID.
htc universal call duration
please explain deeply freind
Did u use JAFWM to Reset Call Duration on the Universal
umairhasan said:
please explain deeply freind
Click to expand...
Click to collapse
What he should Explain Deeply?He is talking clear about
"Reset Call Duration on the Universal"
Hello
I'm trying for a long time to reset call duration on my universal... But everytime I enter rtask b in mtty.exe it says:
USB>rtask b
Radio AT command debug with security check.
SD:Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from response.
SDetected one card
SD:ready for transfer OK
d.total_lba=1DEA00
d.block_size=200
d.RCA=B368
d.drv_type=40000000
d.busWidth=1
Total card size=3BD40000
Read singal error D3
SD read fail!
0
I've got SD card inserted, I've entered bootloader mode and really don't know what else to do... When I enter info 2, on the end of lines it says: HTCSSuperCID @ÀHTCE
I guess that means that it's SuperCID, that's ok right?
Please help, I'm getting really borred with this.
Thanks in advance,
Mike
I think this thread should not be here! Why you people want to reset call duration? I know that many people bought second-hand devices, change the cover, reset call duration then sell them at brand new price. its not good in general
it's realy work 1000%. tks all... after HR lifetime still 000000
Tamagochi said:
I think this thread should not be here! Why you people want to reset call duration? I know that many people bought second-hand devices, change the cover, reset call duration then sell them at brand new price. its not good in general
Click to expand...
Click to collapse
Yo! Tamagochi, if you can't help please don't answer anything... It's not your concern why we need to reset call duration!
BTW. I need it because I want to know how much time did I talk every month, so I could know how much will I have to pay for that month and how much of free minutes I have left...
So please, if anybody can help...
Mod Edit: Donations should be requested in your signature only~TheRomMistress
XDA Forum Rules said:
8. Donations.
We appreciate all donations to xda-developers.com, it keeps our forum online and well maintained. As a user you're allowed to ask for donations in your signature as a thank you for your hard work. However donations up front are not allowed, this forum is about sharing, not about getting paid to do something, that's what your job is for.
Click to expand...
Click to collapse
Fully Charge.
Unrar SDDL.rar,copy all files to storage card
Unrar T01A_to_SP50_wm65-new_theduyet.rar and Create prg folder in storage card and copy enc file after unrar into it.
Remove the SIM Card
- Remove the black plastic tab under where the SIM lies
- Replace the battery
- Secure the battery - use Velcro cable tie, rubber band or sticky tape [vital it does not fall out while Flashing ! ]
- Short (connect together) Pin 1 and Pin 3; then press the Reset Button
- Hold for 10 seconds or so; then release
- Turn phone over and should show white Flash screen in progress until completed and says Successful - Rebooting
Link SDDL: http://t0a.duyet.com/SDDL.rar
Link Rom :http://t0a.duyet.com/T01A_to_SP50_wm65-new_theduyet.rar
Shorten pin Method
See Pic: http://img689.imageshack.us/img689/9964/img0023lp.jpg
To enter downloader mode bridge pin 1 and 3 and press reset. release reset and keep bridge for few seconds. DO NOT PRESS RESET AGAIN. check screen and see what happens.
Secure your battery with duct tape it can drop very easy. If you use short pin method it can drop while you turn phone with screen up. Since you will turn phone just after you reset it will be flashing bootloader and and phone will be bricked for ever.
Click to expand...
Click to collapse
This is the ROM file for T01A only(a japanese version of TG01) .It is made from UK ORANGE ROM for TG01 with modifying.It can NOT work with TG01 or X02T
If you like this rom ,you can make a donation for cedesmith *Link Removed* who found the key for decrypting
It works. Thank you...
i,i will need the unlock code to use my phone?because i live in japan and still gonna use docomo simcard
Following Cedesmith ,the T01A is still locked by docomo after flashing.
So you can continue to use your phone.
tks,I'll try to do it soom
Your phone is working great?Any issues?
mr.mike said:
Fully Charge.
Unrar SDDL.rar,copy all files to storage card
Unrar T01A_to_SP50_wm65-new_theduyet.rar and Create prg folder in storage card and copy enc file after unrar into it.
Remove the SIM Card
- Remove the black plastic tab under where the SIM lies
- Replace the battery
- Secure the battery - use Velcro cable tie, rubber band or sticky tape [vital it does not fall out while Flashing ! ]
- Short (connect together) Pin 1 and Pin 3; then press the Reset Button
- Hold for 10 seconds or so; then release
- Turn phone over and should show white Flash screen in progress until completed and says Successful - Rebooting
Link SDDL: http://t0a.duyet.com/SDDL.rar
Link Rom :http://t0a.duyet.com/T01A_to_SP50_wm65-new_theduyet.rar
Shorten pin Method
If you like this rom ,you can make a donation for cedesmith who made Tg01 tool and Cotulla who found the key for decrypting
Click to expand...
Click to collapse
Mr.Mike, I'll use your method description for a common post for everyone about how to flash a TG01 and link it from any ROM posted, I hope that doesn't bother you.
Works fine,i loved!
thanks a lot to all...
Mr.Mike, I'll use your method description for a common post for everyone about how to flash a TG01 and link it from any ROM posted, I hope that doesn't bother you
Click to expand...
Click to collapse
No problem...It doesn't bother me.
In this thread,i also use the content from the other users's posts
I can't conect to the docomo internet...How to fix this please?
Phone is working fine,but I don't know how to configure docomo network
Because your internet configuration is the configuration for Orange.So you should contact Domoco to get the information about this or you can "googling"
Beside that,you can use a program to automatic configuration as HTC Network Wizard.
Try this my friend
http://oldsap.blogspot.com/2008/04/network-wizard.html
I currently use the same version as from that link but my "about page" have no HTC logo.
If it doesn't work on your T01A, please tell me I will upload another file for you
Hi Tra,with your simunlock,Can you access internet as GPRS or 3G.
Now ,does your sim unlock work well?I think that maybe i need to buy another sim unlock...
mr.mike said:
Hi Tra,with your simunlock,Can you access internet as GPRS or 3G.
Now ,does your sim unlock work well?I think that maybe i need to buy another sim unlock...
Click to expand...
Click to collapse
Yes, it still works well. I get full signal bar instead of 3 bars.
Now I can still access internet through EDGE (it's 17 hours after I flashed your ROM). It ""may"" get 3G signal but I cannot test 3G because my carrier doesn't support 3G.
I think different ROM may somehow act differently to simunlock (just my theory).
I hope the signal will not lose shortly.
Some simunlock make a phone usable by telling that it is in roaming mode (I think you guys already known). My "3G" simunlock also works like that.
However, some simunlock tell the phone that it's used in China so every time you want to find your location in Google map, it always points you at some where in China (experienced from one of "i-smart phone" simunlock model but other models of this brand works well with Docomo's Touch PRO).Unfortunately, I don't know how to check and avoid from buying this poor quality simunlock.
....Just poped up in my thought. My T01A's radio version is 5005.1901.20.
I used to update every patch update from Docomo for Japanese ROM (I mean every update for 6.1 and 6.5) that may updated my radio. If your T01A radio rom has the older version from mine, try to find the way to flash back to Japanese ROM and update it before flash modified UK ROM.
Again, I may be wrong
tra33372 said:
Yes, it still works well. I get full signal bar instead of 3 bars.
Now I can still access internet through EDGE (it's 17 hours after I flashed your ROM). It ""may"" get 3G signal but I cannot test 3G because my carrier doesn't support 3G.
I think different ROM may somehow act differently to simunlock (just my theory).
I hope the signal will not lose shortly.
Some simunlock make a phone usable by telling that it is in roaming mode (I think you guys already known). My "3G" simunlock also works like that.
However, some simunlock tell the phone that it's used in China so every time you want to find your location in Google map, it always points you at some where in China (experienced from one of "i-smart phone" simunlock model but other models of this brand works well with Docomo's Touch PRO).Unfortunately, I don't know how to check and avoid from buying this poor quality simunlock.
....Just poped up in my thought. My T01A's radio version is 5005.1901.20.
I used to update every patch update from Docomo for Japanese ROM (I mean every update for 6.1 and 6.5) that may updated my radio. If your T01A radio rom has the older version from mine, try to find the way to flash back to Japanese ROM and update it before flash modified UK ROM.
Again, I may be wrong
Click to expand...
Click to collapse
what is roaming mode?
bird_9527 said:
what is roaming mode?
Click to expand...
Click to collapse
The phone will show a triangle on the taskbar when it detect that our T01A's used outside Japan. This is Roaming mode.
See my the second attatched picture.
http://forum.xda-developers.com/showthread.php?t=654373&page=4
In roaming mode, the signal is quite unstable (depends on various factors eg. phone, simunlock and the quality of your SIM).
What is your radio version?
OK。。。I see，my phone have no roaming mode....
my radio version is 5005.1901.20,too
Yeah, but I can't adjust the setting to use the GPRS function with my Mr.sim.And the signal is very unstable, only in city center, outside I will get "no service" meassage
Work with X02T too?
plz you know if this new way for flash the TG01 japanese will work with X02T too? or just with T01A?
You should contact to cotulla and he can find the encrypt key ,maybe the x02 rom is different with t01A... after that you contact cedesmith to add this key into tgtool...
and maybe you need to create a English rom for X02T by your self .It's not difficult....
have any way for check if the key or Rom will work with my X02T (TG01 by SoftBank)?