Related
Hi all,
I have installed Widcomm Bluetooth 1.4.2.21 on my PC.
The problem I am facing is that Widcomm can not detect my Com1 Bluetooth Dongle.
Can anyone help me.
Thanks in advance for your help.
Best regards,
Saadi
Hi! Where can I find Widcomm 1.4.2.21 for downloading? Do you have a link?
I have an Acer bluetooth Dongle using an older version of Widcomm Stack (1.3) but its working fine, except networking with XDA2 because of stupid MS Stack, tried to install Widcomm Stack also on XDA2 (with file bluetoothgps.zip)but its not a real solution as the headset doesn't work nicely....and the two stacks interfere.. I you want I can perhaps upload it here, although its quite big (25MB).
Regards
Rainer
widcomm
Do you have an ftp server where I can uploaded for you.
I tried to uplod it here but I could not.
Bets regards,
Saadi
Do you have an ftp server where I can uploaded for you.
How big is it?
I would really appreciate if you can share it with me (others) as well.
My BT dongle came with older version and experiencing some problmes because of it...
Can't you attach it to your message? I've seen tons of people attaching ROMs that are 26mb
you can find it here http://www.filemirrors.com .
Best regards,
Saadi
Nice one! downloading right now :lol:
Great site filemirrors.com!
Thanks a lot, cheers!
Version 1.4.3.4
V1.4.3.4 is also on filemirrors for download.
I've pulled this down, but before I install it, any views as to XDA2 compatability and functionality compared to the built-in stack (ROM 1.6)
Thanks!
Have you tried this? http://home.comcast.net/~spam-target/activesyncz.html
It didn't work with my Orange Blue2 USB dongle.
hmmm strange... when I try to install the widcomm 1.4 versions the com port is always com 0 for the serial port service... I cannot change this or add a port or anything. Now I reinstalled Widcomm 1.3.5 (attached) and everything is fine and I can use serial port com 4 but in Widcomm 1.3.5 theres no Audio Profiles oder HID Profiles . ...but I need com 4 for ActiveSync....I have Acer Bluetooth Dongle..... Anybody has a Solution?
Cheers...
Hey,guys..try this tutorial,so you can install a widcomm 1.4.x.x to any of your Bt dongles without problems! :wink:
http://www.jonsguides.com/bt/en/driver.html
Regards
Very good guide! Will try it tonight, hope it will work...
Thanks for the link...
Hi !
You can download
Widcomm 1.4.2.10
here : http://www.bluwireless.com/products/bw001.html
I have many difficulties with activesync, network etc... /bundle...
I may have some questions soon
mmm...
It may be better not to download the above link... i think there is a license problem...
sorry
Hi,
Anyone knows which version of widcomm blutooth stack works on win2003se 2.2xx tanslated from chinees??? please somebody help me with this...
Thanks
there is a treed on this forum with a working widcomm driver, i personaly have the 2.20 SE ver of windows, and I have it on my hima, it is working perfectly.
my version is 1.5.0.0801, do a search on the forum. there is a guy that made a cab instalation file for it, all that you need is to download the cab and the registry files wavedev and 1[1].5.0801-Final.
read the tread for more info on it.
i really appreciate if you can email me or upload the files since i am totaly confused with this...
Thanks
I would be also very much appreiciated if somebody will be able to upload it here.
thank you
click
Search
type widcom 0801
choose "Search for all terms"
Enter
====> TADA =>>>>http://forum.xda-developers.com/viewtopic.php?t=11729&highlight=widcomm+0801
M4io, Thanks but does it work on win2003se 2.2xx tanslated from chinees?
I don't know, i guess you just have to try.
If you do, please post your experience, so others can benefit
yeah sure, i have installed BlutootGPS and then WidcomPE and is working fine, just sometime says "bloototh could not be correctly initialized" but when it connects works fine.
I told you that the other .cab file is working fine on the 2.20 ver. I know for the message that you get, you need the non phone edition version, look at page 3 of the treed that m4io posted and look fot henrylim's post, there is a file attached called BT Widcomm.zip, download that and then download the other two files that i told you before (wavedev and 1[1].5.0801-Final), this two files are on page 1.
Thanks gotcha_mdaII,
i'll give it a try...
Hi,
I came across this seemingly wonderful BT stack replacement. It advertised to be A2DP, HID, LAP, OPP, PAN, SPP, SYNC, HS (headset) etc. Seems to have an excellent set of profiles!
Can someone try this on their device and tell me whether it works?
I'm looking for WM2003SE and WM2003 fellas (1.60, 1.72)..
http://www.bluesoleil.com/update/index.asp
Download Bluesoleil_CE_Eva_7.30.zip, version 1.4.9 (dated Nov 22, 2004).
It's a 60 days evaluation copy.
I will be the first to admit that it didn't install properly on my device, but then again, my device is now a mis-mash of configurations due to my various test on the registry.
Please check it out, and let us know. Perhaps this might be the solution to end all our problems.
And I hv extracted the HP phone registry - only the Widcomm BT related parts. Can't post the whole thing here, sorry.
Have fun to figure out if HP registry helps in enhancing our Widcomm stack....
Anyone has a XDA2s wavedev.dll?
About Bluesoleil tried it few weeks ago. Not working at least for my headset (Bluetrek G2).
Actually I guessed it's not working at all.
Thanks!
Hey Henry!!!,
Thank you very very very very!! much!!!
Now i have widcomm 1.5 and my bluetooth headset is working and im not get those annoying messages agian!!!!....I LOVE MY DEVICE..Thanks Again!!!
Mr 1 , could u listen to any mp3 by your bluetooth headset now?and how?
Hi, first post, please be gentle
I have an o2 XDA Mini S which I have reflashed with the latest T-Mobile UK rom as I'm using a T-mobile UK sim. I've bought a bluetooth GPS device which should arrive tomorrow morning and reading through the forums it seems I will need to set an outgoing com port for this to work with my tomtom 5.21 software. However, I do not have the option of creating an outgoing com port. There is only an option to create a new incoming port. Will this option appear after I have paired the devices? Or do I need to do something else to make this option appear?
thanks
ROM version: 2.26.10.2 WWE
ROM Date: 6/7/06
Radio version: 02.25.11
Protocol version: 4.1.13.12
ExtRom version: 2.26.10.105
i also just got a vario and have updated it to the latest ROM version 2.21 which I got from here:
http://www.tm-phonedownloads.com/download_manager_mda_vario.html
Haven't heard about the later 2.26 u have got. May I ask where you got it from?
Cheers
PS. sorry can't answer ur question(yet!)
Check this forum for upgrades http://forum.xda-developers.com/viewforum.php?f=40
Im having a similar problem... I have set my bluetooth on my phone to COM Port 7 and created a partnership with my computer. Yet when I try and connect through activesync it still isnt working?! Do I need to configure a port on my computer ?
OP: To set a new outgoing bluetooth com port;
Start -> Settings -> Connections -> Bluetooth -> COM Ports -> New Outgoing Port
Then select the devie you want to add (you already need to have your GPS device turned on), and go from there through the steps. Good luck 8)
That's the key...you have to have the device paired to the pda in order to set up a com port for it.
Ive linked mine up together and can use my bluetooth software to share them but I cant use activesync to sync them?
I was reading somewhere about Bluetooth Support on my computers control panel yet I dont have this? Im working on Windoxs XP SP 2 aswell
chrisredmayne said:
Ive linked mine up together and can use my bluetooth software to share them but I cant use activesync to sync them?
I was reading somewhere about Bluetooth Support on my computers control panel yet I dont have this? Im working on Windoxs XP SP 2 aswell
Click to expand...
Click to collapse
If you are using AS 3.8 or higher, you can not do blutooth sync! It does not surport it!
No way?! I think Im on the latest version...
But it must support it as its in its help files.
It tell sme to open up the control panel and open bluetooth support. then select a COM port
chrisredmayne said:
No way?! I think Im on the latest version...
But it must support it as its in its help files.
It tell sme to open up the control panel and open bluetooth support. then select a COM port
Click to expand...
Click to collapse
The MDA (T-MO USA) most certainly does support BT activesync!
1. Pair with the host computer.
2. Under services "ActiveSync" should be an option. Check it.
* If it doesn't show, you may need to do some setup on your computer to make that service available.
3. Go to ActiveSync.
4. Under Menu, select "Connect via Bluetooth"
5. You should be in!
Note for Mac users: Use Missing Sync by MarkSpace, which includes this capability.
hjafary said:
i also just got a vario and have updated it to the latest ROM version 2.21 which I got from here:
http://www.tm-phonedownloads.com/download_manager_mda_vario.html
Haven't heard about the later 2.26 u have got. May I ask where you got it from?
Cheers
PS. sorry can't answer ur question(yet!)
Click to expand...
Click to collapse
2.26 can be obtained from molski.biz and its stripped down, it has no carrier customizations
Hi, i'd like tu use a BT PAN to play battleship (during meetings of course) !
For what I understand, le BT Stack is crap...
What can I do ?
tyTN (FR)
ROM 1.18.256.2
Radio 1.27.00.00
Thanx
gregouille said:
Hi, i'd like tu use a BT PAN to play battleship (during meetings of course) !
For what I understand, le BT Stack is crap...
What can I do ?
tyTN (FR)
ROM 1.18.256.2
Radio 1.27.00.00
Thanx
Click to expand...
Click to collapse
Please follow my articles - they're all cross-posted to the General forum here. I've elaborated on this question at http://forum.xda-developers.com/showthread.php?t=291605 . In a nutshell: yes, you can; you will need to
1, either install the Widcomm BT stack on your device (see http://forum.xda-developers.com/showthread.php?t=285419 )
2, or install an AKU3 ROM and use Internet Sharing to set up a BT PAN network (see my AKU3-related article at http://forum.xda-developers.com/showthread.php?t=282780 )
hi,
at 1st, thx for your answer.
I guess the best way for me is the 1st one, because of my french ROM.
I tried to read the 20 pages of the thread... but by english is too poor to fond out what i shoudl DL and install.
can you hel a bit more ?
thanks again.
gregouille said:
hi,
at 1st, thx for your answer.
I guess the best way for me is the 1st one, because of my french ROM.
I tried to read the 20 pages of the thread... but by english is too poor to fond out what i shoudl DL and install.
can you hel a bit more ?
thanks again.
Click to expand...
Click to collapse
Just read http://forum.xda-developers.com/showpost.php?p=1072773&postcount=72 - it links in the Widcomm BT stack, which you can install right away.
Hi
Thanks for your answers. I have a few issues with the bbs cab : after install & reset, i had an error message on boot "not enough memory". I have 2 BT icons in settings folder and when BT is activated (blue led flashing), the widcomm icon says BT is off and once I managed to sync them, I couldn't etablish a PAN...
Any ideas ?
hello guys
i have a t002 rk3066 stick no bt inside realtek 8188ETV
what is the rom compatible for this model?
i found only rom without option bluetooth (only wifi & ethernet) . the option is troncate and replaced by ethernet
the firmware have a logo rinkomagic
I would use the bt dongle but the software does not allow me to enable the voice bluetooth
sorry if I expressed myself badly , but I do not speak English well .. :silly:
thank you
ps my stick is :