Database Users

wmodem.cab

can someone with a xda2 using the extended rom builder extract and post a wmodem.cab from an english version ?
thanks

Hi!
I have just download it from a brand new I-mate with WM2003PE. My friend bought it. I have no time to try it with the I-mate.
With my Wallaby, I cant use it. If you can, please tell me a detailed setup! I try it with USb and with IrDA. My PC does not recognise the PDA as an USB or IrDA modem.

Hey Ya
Anyone got the O2 Xda II version of this CAB file please?

The file that I attached is from a Himalaya!

Does anyone have a .cab for Wmodem, that will work on an HTC TP2 (Rhodium T7380)?
I realize it's an old thread, and an OLD phone...
I'm trying to do a workaround, and connect to a pfSense box, which is a firewall and router. Mine is on a tower/pc x86, not on a plastic embedded router.
I've been pointed at this forum thread, not hyperlinked/broken, to allow me to post:
ubuntuforums.org/showthread.php?t=780339
I've been using WMWifiRouter, have the .cab and the free license code .cab, which is now free to all.
However, per the thread above, and a poster on pfSense.org, I may need to try a client side (desktop) dialer.
It would be much easier, I suppose, to flash Timberwolf671's cooked rom. And, if bluetooth, camera or other hardware issues were never worked out, dual boot Android, via Haret...

Post any xda gprs/mms setting for Indonesia's Matrix

I've been browsing the net and searching all over xda-developers.com for Satelindo Matrix' gprs/mms setting and i just want to post my findings here for any other xda users using Matrix in jakarta, indonesia...i've only come up with the gprs settings, currently trying my way to set up ezwap for mms...
A VERY IMPORTANT NOTE : DO NOT USE XDA WITH RADIO STACK ROM OTHER THAN VERSION 4.16 BECAUSE ANY OTHER VERSION IS NOT COMPATIBLE AND WILL CAUSE TROUBLE WITH MATRIX' 64 KB SIM CARDS.
GPRS settings :
1. start -> settings -> connection -> connection and tap new..
2. name it SatGPRS for an example
3. tap the modem tab and tap new
4. enter SatGPRS as name for an example, Select A Modem : Cellular Line (GPRS), Baud Rate : anything u want
5. tap advanced and tap the name servers tab, enter 202.152.162.66 as the primary dns
6. tap ok at the top right and tap next, enter satelindogprs.com as the access point name
7. tap finish
you're all done...please anyone if u have cooked a working setting for exwap to sent mms, post it here...hope i can be any help...
tista

hi tista, .. I wanna ask you bout the Radio Stack ROM u're mentioned before ..
A VERY IMPORTANT NOTE : DO NOT USE XDA WITH RADIO STACK ROM OTHER THAN VERSION 4.16 BECAUSE ANY OTHER VERSION IS NOT COMPATIBLE AND WILL CAUSE TROUBLE WITH MATRIX' 64 KB SIM CARDS.
Click to expand...
Click to collapse
can u tell me where to download the Radio Stack ROM v 4.16 ? .. I'm using matrix
I have a trouble with the receive or dial a call .. and sms always comes late ..
TIA ..
-reza-

IM3 GPRS setting
Do u know GPRS and MMS setting for IM3?
I try to search the forum but i can't find it yet

have u tried the auto configuration ? setting, system, auto configuration .. then choose the IM3 ...
maybe that will do ..
then if you an Indonesian how about join us in o2 club at [email protected] maybe you can find the info you seek there ..
good luck ..
-peter-

Asia including Indonesia MMS Setup
I thought this might help anyone to set their MMS:
http://www.myxda.com/web/template/ShopEzWAPHowTo.vm/shop_item_name/EzWAP
Brgds

Widcomm for Win2003SE Ver. 2.2xx on Himalaya

Hi,
Anyone knows which version of widcomm blutooth stack works on win2003se 2.2xx tanslated from chinees??? please somebody help me with this...
Thanks

there is a treed on this forum with a working widcomm driver, i personaly have the 2.20 SE ver of windows, and I have it on my hima, it is working perfectly.
my version is 1.5.0.0801, do a search on the forum. there is a guy that made a cab instalation file for it, all that you need is to download the cab and the registry files wavedev and 1[1].5.0801-Final.
read the tread for more info on it.

i really appreciate if you can email me or upload the files since i am totaly confused with this...
Thanks

I would be also very much appreiciated if somebody will be able to upload it here.
thank you

click
Search
type widcom 0801
choose "Search for all terms"
Enter
====> TADA =>>>>http://forum.xda-developers.com/viewtopic.php?t=11729&highlight=widcomm+0801

M4io, Thanks but does it work on win2003se 2.2xx tanslated from chinees?

I don't know, i guess you just have to try.
If you do, please post your experience, so others can benefit

yeah sure, i have installed BlutootGPS and then WidcomPE and is working fine, just sometime says "bloototh could not be correctly initialized" but when it connects works fine.

I told you that the other .cab file is working fine on the 2.20 ver. I know for the message that you get, you need the non phone edition version, look at page 3 of the treed that m4io posted and look fot henrylim's post, there is a file attached called BT Widcomm.zip, download that and then download the other two files that i told you before (wavedev and 1[1].5.0801-Final), this two files are on page 1.

Thanks gotcha_mdaII,
i'll give it a try...

Hi,
I came across this seemingly wonderful BT stack replacement. It advertised to be A2DP, HID, LAP, OPP, PAN, SPP, SYNC, HS (headset) etc. Seems to have an excellent set of profiles!
Can someone try this on their device and tell me whether it works?
I'm looking for WM2003SE and WM2003 fellas (1.60, 1.72)..
http://www.bluesoleil.com/update/index.asp
Download Bluesoleil_CE_Eva_7.30.zip, version 1.4.9 (dated Nov 22, 2004).
It's a 60 days evaluation copy.
I will be the first to admit that it didn't install properly on my device, but then again, my device is now a mis-mash of configurations due to my various test on the registry.
Please check it out, and let us know. Perhaps this might be the solution to end all our problems.

And I hv extracted the HP phone registry - only the Widcomm BT related parts. Can't post the whole thing here, sorry.
Have fun to figure out if HP registry helps in enhancing our Widcomm stack....
Anyone has a XDA2s wavedev.dll?

About Bluesoleil tried it few weeks ago. Not working at least for my headset (Bluetrek G2).
Actually I guessed it's not working at all.

Thanks!
Hey Henry!!!,
Thank you very very very very!! much!!!
Now i have widcomm 1.5 and my bluetooth headset is working and im not get those annoying messages agian!!!!....I LOVE MY DEVICE..Thanks Again!!!

Mr 1 , could u listen to any mp3 by your bluetooth headset now?and how?

a little help needed!

ok i have just a small query as to upgrading firmware on my wallaby...
i have ROM version 3.17.03 ENG radio version 4.20.00 protocol version 32s54
is it actually possible to update this, and which would be the best update? i have downloaded the xda developers v1.2, which i would use programme A and active sync i presume(?) but just checkin to see if this would actually work or whether it would bugger everything up lol i have backed the ROm up with OSimage tools and activesync so i think i have covered my bases! Also i am running ezwap v2.5 mms working all that and most wap pages, but when i try to open some pages, i.e mobile.msn.com it comes up with a download box which i click yes on (if i click no it cancels it) and then it comes up with there is no application associated with /temp/ ****** not a valid pocket pc application. its driving me mad, as im unable to check any email or basically sign into anything, and even my DS running opera can do that!!!
cheers for help!

anyone please?

bluetooth problems in wm6/wm6.5

hi
i have the herm100 device using wm5
i update my rom to wm6 and 6.5 and still have a big problem getting files from other devices by bluetooth connection
i can sent files but cant get them from other - i get an error from other device tat i dont have a ftp or opp service active
everything worked hust fine on my mobile 5
please help
if i want to go back to wm5 the original how can i do it ?

amirnili said:
hi
i have the herm100 device using wm5
i update my rom to wm6 and 6.5 and still have a big problem getting files from other devices by bluetooth connection
i can sent files but cant get them from other - i get an error from other device tat i dont have a ftp or opp service active
everything worked hust fine on my mobile 5
please help
if i want to go back to wm5 the original how can i do it ?
Click to expand...
Click to collapse
Enable Beam and Bluetooth (+make your device visible) then try to send. That's how I solved the problem.

i tried it but it doesnt help
how can i go back to wm5 if i want to ?

Try to check this:
Enable receiving of files over BlueTooth/IrDA:
HKLM\Software\Microsoft\Obex\IsEnabled = 1 (DWORD decimal)
If you want to prevent receiving files over BlueTooth or IrDA, you can set the following value:
HKLM\Software\Microsoft\Obex\IsEnabled = 0 (DWORD decimal)

amirnili said:
hi
i have the herm100 device using wm5
i update my rom to wm6 and 6.5 and still have a big problem getting files from other devices by bluetooth connection
i can sent files but cant get them from other - i get an error from other device tat i dont have a ftp or opp service active
everything worked hust fine on my mobile 5
please help
if i want to go back to wm5 the original how can i do it ?
Click to expand...
Click to collapse
May i know who's the chef who cooked your rom, maybe you can give a feedback to him..
And also you can choose another version of ROM. AFAIK, the 6.5 is not yet as stable as WM6/6.1.
BTW, i'm currently using Schap's 4.31. And so far, i haven't encounter any problems yet.