Database Users

Widcomm Bluetooth 1.4.2.21

Hi all,
I have installed Widcomm Bluetooth 1.4.2.21 on my PC.
The problem I am facing is that Widcomm can not detect my Com1 Bluetooth Dongle.
Can anyone help me.
Thanks in advance for your help.
Best regards,
Saadi

Hi! Where can I find Widcomm 1.4.2.21 for downloading? Do you have a link?
I have an Acer bluetooth Dongle using an older version of Widcomm Stack (1.3) but its working fine, except networking with XDA2 because of stupid MS Stack, tried to install Widcomm Stack also on XDA2 (with file bluetoothgps.zip)but its not a real solution as the headset doesn't work nicely....and the two stacks interfere.. I you want I can perhaps upload it here, although its quite big (25MB).
Regards
Rainer

widcomm
Do you have an ftp server where I can uploaded for you.
I tried to uplod it here but I could not.
Bets regards,
Saadi

Do you have an ftp server where I can uploaded for you.
How big is it?
I would really appreciate if you can share it with me (others) as well.
My BT dongle came with older version and experiencing some problmes because of it...

Can't you attach it to your message? I've seen tons of people attaching ROMs that are 26mb

you can find it here http://www.filemirrors.com .
Best regards,
Saadi

Nice one! downloading right now :lol:
Great site filemirrors.com!
Thanks a lot, cheers!

Version 1.4.3.4
V1.4.3.4 is also on filemirrors for download.
I've pulled this down, but before I install it, any views as to XDA2 compatability and functionality compared to the built-in stack (ROM 1.6)
Thanks!

Have you tried this? http://home.comcast.net/~spam-target/activesyncz.html

It didn't work with my Orange Blue2 USB dongle.

hmmm strange... when I try to install the widcomm 1.4 versions the com port is always com 0 for the serial port service... I cannot change this or add a port or anything. Now I reinstalled Widcomm 1.3.5 (attached) and everything is fine and I can use serial port com 4 but in Widcomm 1.3.5 theres no Audio Profiles oder HID Profiles . ...but I need com 4 for ActiveSync....I have Acer Bluetooth Dongle..... Anybody has a Solution?
Cheers...

Hey,guys..try this tutorial,so you can install a widcomm 1.4.x.x to any of your Bt dongles without problems! :wink:
http://www.jonsguides.com/bt/en/driver.html
Regards

Very good guide! Will try it tonight, hope it will work...
Thanks for the link...

Hi !
You can download
Widcomm 1.4.2.10
here : http://www.bluwireless.com/products/bw001.html
I have many difficulties with activesync, network etc... /bundle...
I may have some questions soon

mmm...
It may be better not to download the above link... i think there is a license problem...
sorry

XDA II and Newlink Bluetooth dongle

Hello everyone,
I have a Newlink Bluetooth dongle and i have a problem with it:
i have downloaded the driver from his home page and instaled but windows force to put it's own.
Q: how can I put his driver instead of windows one?
thanks and best regards

the drivers have to be of a newer date to work after xp sp2
i got some newer ones from belkin i could use but if all you need is
sync then you can just use the ms ones

Thanks
Could you give a link with a new driver? I have XP with the latest updates and SP installed on my PC. Where can I find that driver?
regards

Help setting up bluetooth com ports needed

Hi, first post, please be gentle
I have an o2 XDA Mini S which I have reflashed with the latest T-Mobile UK rom as I'm using a T-mobile UK sim. I've bought a bluetooth GPS device which should arrive tomorrow morning and reading through the forums it seems I will need to set an outgoing com port for this to work with my tomtom 5.21 software. However, I do not have the option of creating an outgoing com port. There is only an option to create a new incoming port. Will this option appear after I have paired the devices? Or do I need to do something else to make this option appear?
thanks
ROM version: 2.26.10.2 WWE
ROM Date: 6/7/06
Radio version: 02.25.11
Protocol version: 4.1.13.12
ExtRom version: 2.26.10.105

i also just got a vario and have updated it to the latest ROM version 2.21 which I got from here:
http://www.tm-phonedownloads.com/download_manager_mda_vario.html
Haven't heard about the later 2.26 u have got. May I ask where you got it from?
Cheers
PS. sorry can't answer ur question(yet!)

Check this forum for upgrades http://forum.xda-developers.com/viewforum.php?f=40
Im having a similar problem... I have set my bluetooth on my phone to COM Port 7 and created a partnership with my computer. Yet when I try and connect through activesync it still isnt working?! Do I need to configure a port on my computer ?

OP: To set a new outgoing bluetooth com port;
Start -> Settings -> Connections -> Bluetooth -> COM Ports -> New Outgoing Port
Then select the devie you want to add (you already need to have your GPS device turned on), and go from there through the steps. Good luck 8)

That's the key...you have to have the device paired to the pda in order to set up a com port for it.

Ive linked mine up together and can use my bluetooth software to share them but I cant use activesync to sync them?
I was reading somewhere about Bluetooth Support on my computers control panel yet I dont have this? Im working on Windoxs XP SP 2 aswell

chrisredmayne said:
Ive linked mine up together and can use my bluetooth software to share them but I cant use activesync to sync them?
I was reading somewhere about Bluetooth Support on my computers control panel yet I dont have this? Im working on Windoxs XP SP 2 aswell
Click to expand...
Click to collapse
If you are using AS 3.8 or higher, you can not do blutooth sync! It does not surport it!

No way?! I think Im on the latest version...
But it must support it as its in its help files.
It tell sme to open up the control panel and open bluetooth support. then select a COM port

chrisredmayne said:
No way?! I think Im on the latest version...
But it must support it as its in its help files.
It tell sme to open up the control panel and open bluetooth support. then select a COM port
Click to expand...
Click to collapse
The MDA (T-MO USA) most certainly does support BT activesync!
1. Pair with the host computer.
2. Under services "ActiveSync" should be an option. Check it.
* If it doesn't show, you may need to do some setup on your computer to make that service available.
3. Go to ActiveSync.
4. Under Menu, select "Connect via Bluetooth"
5. You should be in!
Note for Mac users: Use Missing Sync by MarkSpace, which includes this capability.

hjafary said:
i also just got a vario and have updated it to the latest ROM version 2.21 which I got from here:
http://www.tm-phonedownloads.com/download_manager_mda_vario.html
Haven't heard about the later 2.26 u have got. May I ask where you got it from?
Cheers
PS. sorry can't answer ur question(yet!)
Click to expand...
Click to collapse
2.26 can be obtained from molski.biz and its stripped down, it has no carrier customizations

upgrade/change(language)rom via BT

Hi!
Is possible to change rom (for changing language) using the procedure linked here http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade using bluetooth instead of usb cable or cradle?
Thanks

No, because BT needs a working ROM which cannot be available during upgrade! (Can you change your car while driving?)

ehm...
:roll: probably I was drunk!
Sorry

[Q] Touch2 bluetooth module

Hi guys, first of all i want to be excused not to check out all the threads that've been posted.My problem is with the BT application which is originally installed and has a few problems which im trying to deal with. Does anyone know how to fix BT with the original interface of WM6.5?! I'll try to upload images to be more specific. Thanks in advance
p.s In my case the BT module in TOUCH2 can pair with the device only by COM2!
The standart BT module on other device with clean mobile 6.5 allows you to choose outgoing COM port from 1-9.

Moved to general as not rom development