Hi, i'd like tu use a BT PAN to play battleship (during meetings of course) !
For what I understand, le BT Stack is crap...
What can I do ?
tyTN (FR)
ROM 1.18.256.2
Radio 1.27.00.00
Thanx
gregouille said:
Hi, i'd like tu use a BT PAN to play battleship (during meetings of course) !
For what I understand, le BT Stack is crap...
What can I do ?
tyTN (FR)
ROM 1.18.256.2
Radio 1.27.00.00
Thanx
Click to expand...
Click to collapse
Please follow my articles - they're all cross-posted to the General forum here. I've elaborated on this question at http://forum.xda-developers.com/showthread.php?t=291605 . In a nutshell: yes, you can; you will need to
1, either install the Widcomm BT stack on your device (see http://forum.xda-developers.com/showthread.php?t=285419 )
2, or install an AKU3 ROM and use Internet Sharing to set up a BT PAN network (see my AKU3-related article at http://forum.xda-developers.com/showthread.php?t=282780 )
hi,
at 1st, thx for your answer.
I guess the best way for me is the 1st one, because of my french ROM.
I tried to read the 20 pages of the thread... but by english is too poor to fond out what i shoudl DL and install.
can you hel a bit more ?
thanks again.
gregouille said:
hi,
at 1st, thx for your answer.
I guess the best way for me is the 1st one, because of my french ROM.
I tried to read the 20 pages of the thread... but by english is too poor to fond out what i shoudl DL and install.
can you hel a bit more ?
thanks again.
Click to expand...
Click to collapse
Just read http://forum.xda-developers.com/showpost.php?p=1072773&postcount=72 - it links in the Widcomm BT stack, which you can install right away.
Hi
Thanks for your answers. I have a few issues with the bbs cab : after install & reset, i had an error message on boot "not enough memory". I have 2 BT icons in settings folder and when BT is activated (blue led flashing), the widcomm icon says BT is off and once I managed to sync them, I couldn't etablish a PAN...
Any ideas ?
Related
Hi all,
I have installed Widcomm Bluetooth 1.4.2.21 on my PC.
The problem I am facing is that Widcomm can not detect my Com1 Bluetooth Dongle.
Can anyone help me.
Thanks in advance for your help.
Best regards,
Saadi
Hi! Where can I find Widcomm 1.4.2.21 for downloading? Do you have a link?
I have an Acer bluetooth Dongle using an older version of Widcomm Stack (1.3) but its working fine, except networking with XDA2 because of stupid MS Stack, tried to install Widcomm Stack also on XDA2 (with file bluetoothgps.zip)but its not a real solution as the headset doesn't work nicely....and the two stacks interfere.. I you want I can perhaps upload it here, although its quite big (25MB).
Regards
Rainer
widcomm
Do you have an ftp server where I can uploaded for you.
I tried to uplod it here but I could not.
Bets regards,
Saadi
Do you have an ftp server where I can uploaded for you.
How big is it?
I would really appreciate if you can share it with me (others) as well.
My BT dongle came with older version and experiencing some problmes because of it...
Can't you attach it to your message? I've seen tons of people attaching ROMs that are 26mb
you can find it here http://www.filemirrors.com .
Best regards,
Saadi
Nice one! downloading right now :lol:
Great site filemirrors.com!
Thanks a lot, cheers!
Version 1.4.3.4
V1.4.3.4 is also on filemirrors for download.
I've pulled this down, but before I install it, any views as to XDA2 compatability and functionality compared to the built-in stack (ROM 1.6)
Thanks!
Have you tried this? http://home.comcast.net/~spam-target/activesyncz.html
It didn't work with my Orange Blue2 USB dongle.
hmmm strange... when I try to install the widcomm 1.4 versions the com port is always com 0 for the serial port service... I cannot change this or add a port or anything. Now I reinstalled Widcomm 1.3.5 (attached) and everything is fine and I can use serial port com 4 but in Widcomm 1.3.5 theres no Audio Profiles oder HID Profiles . ...but I need com 4 for ActiveSync....I have Acer Bluetooth Dongle..... Anybody has a Solution?
Cheers...
Hey,guys..try this tutorial,so you can install a widcomm 1.4.x.x to any of your Bt dongles without problems! :wink:
http://www.jonsguides.com/bt/en/driver.html
Regards
Very good guide! Will try it tonight, hope it will work...
Thanks for the link...
Hi !
You can download
Widcomm 1.4.2.10
here : http://www.bluwireless.com/products/bw001.html
I have many difficulties with activesync, network etc... /bundle...
I may have some questions soon
mmm...
It may be better not to download the above link... i think there is a license problem...
sorry
Hi,
Anyone knows which version of widcomm blutooth stack works on win2003se 2.2xx tanslated from chinees??? please somebody help me with this...
Thanks
there is a treed on this forum with a working widcomm driver, i personaly have the 2.20 SE ver of windows, and I have it on my hima, it is working perfectly.
my version is 1.5.0.0801, do a search on the forum. there is a guy that made a cab instalation file for it, all that you need is to download the cab and the registry files wavedev and 1[1].5.0801-Final.
read the tread for more info on it.
i really appreciate if you can email me or upload the files since i am totaly confused with this...
Thanks
I would be also very much appreiciated if somebody will be able to upload it here.
thank you
click
Search
type widcom 0801
choose "Search for all terms"
Enter
====> TADA =>>>>http://forum.xda-developers.com/viewtopic.php?t=11729&highlight=widcomm+0801
M4io, Thanks but does it work on win2003se 2.2xx tanslated from chinees?
I don't know, i guess you just have to try.
If you do, please post your experience, so others can benefit
yeah sure, i have installed BlutootGPS and then WidcomPE and is working fine, just sometime says "bloototh could not be correctly initialized" but when it connects works fine.
I told you that the other .cab file is working fine on the 2.20 ver. I know for the message that you get, you need the non phone edition version, look at page 3 of the treed that m4io posted and look fot henrylim's post, there is a file attached called BT Widcomm.zip, download that and then download the other two files that i told you before (wavedev and 1[1].5.0801-Final), this two files are on page 1.
Thanks gotcha_mdaII,
i'll give it a try...
Hi,
I came across this seemingly wonderful BT stack replacement. It advertised to be A2DP, HID, LAP, OPP, PAN, SPP, SYNC, HS (headset) etc. Seems to have an excellent set of profiles!
Can someone try this on their device and tell me whether it works?
I'm looking for WM2003SE and WM2003 fellas (1.60, 1.72)..
http://www.bluesoleil.com/update/index.asp
Download Bluesoleil_CE_Eva_7.30.zip, version 1.4.9 (dated Nov 22, 2004).
It's a 60 days evaluation copy.
I will be the first to admit that it didn't install properly on my device, but then again, my device is now a mis-mash of configurations due to my various test on the registry.
Please check it out, and let us know. Perhaps this might be the solution to end all our problems.
And I hv extracted the HP phone registry - only the Widcomm BT related parts. Can't post the whole thing here, sorry.
Have fun to figure out if HP registry helps in enhancing our Widcomm stack....
Anyone has a XDA2s wavedev.dll?
About Bluesoleil tried it few weeks ago. Not working at least for my headset (Bluetrek G2).
Actually I guessed it's not working at all.
Thanks!
Hey Henry!!!,
Thank you very very very very!! much!!!
Now i have widcomm 1.5 and my bluetooth headset is working and im not get those annoying messages agian!!!!....I LOVE MY DEVICE..Thanks Again!!!
Mr 1 , could u listen to any mp3 by your bluetooth headset now?and how?
Alright everyone,
attached is the latest build available of bluetooth from broadcom. My 100 euros is still up for grabs for getting this build to work on a Xda II mini!!!!
[Updated]
Everyone, Just updated it, realised i left some DLL's out. Here is everything!!!
hi did any one try this version what all addittional features does it have, does dialing from bluetooth headset works. does it work with xda iis.
thanks
jeet
Walshie, I just copied the contents of the rar to my \windows directory on the ppc. It does not seem that anything has changed since the old MS stack. Starting e.g. the BTConnmanagerCE.exe on the ppc gives me an error: Cannot find BTConnManagerCE or one of its components. Make sure...etc.... I also don't have the PAN service.
Where did I go wrong??
there are a lot of files missing can u post the complete files.
thanks
jeet
jeet said:
there are a lot of files missing can u post the complete files.
thanks
jeet
Click to expand...
Click to collapse
Did you download the Updated version?? Because i realised that i had left some files out so i found the rest and included them
Has anyone tried this on an XDA II? The last few bluetooth stacks I've tried have hosed my device needing a hard reset.
-no1
Walshie, I forgot to import your registry. having done that at least it starts the wizard, but it hangs on the next steps. Complains about a dll, which is included, but it is reported as missing. Just did a hard reset to get rid of this stack, so I cannot tell you which dll is erroneous. Could of course also be a registry entry which flunked. I did use the updated rar.
works on my pda2k... static seems a little bad at times. also unable to get the phone to allow you to answer a call from the headset, or even auto xfer the call to the headset.. and you cant hangup the call from a headset.
Missing Files
This is a list of missing files can u pls post the complete package.
BTBusinessCard.exe
BTCePimCmdApp.exe
HFPUI.exe
CheckFile.exe
aceddi.dll
acevidcap.dll
ahioem.dll
AudioGW.dll
BTAudioGW.dll
BtCeBCSPTrans.dll
BtCeIf.dll
BTCeOsif4.dll
btcepan.dll
BtCeProfiles.dll
BtCeSendToPoom.dll
BtCeStack.dll
BtContextMenuPE.dll
BtPhoneIf.dll
FrontLight.dll
HFPControlPanel.dll
Keybddr.dll
SdkCE.dll
SerialBTUR.dll
SerialCmd.dll
tiacxwln.dll
Wavedev.dll
wbtapiCE.dll
CeSetup.dll
Click to expand...
Click to collapse
...any news on magician and widcomm ?!?!
nope, reward up to 200 eur!!!
Does this new build include A2DP the (Advanced Audio) profile?
yes it does
Re: Missing Files
jeet said:
This is a list of missing files can u pls post the complete package.
BTBusinessCard.exe
BTCePimCmdApp.exe
HFPUI.exe
CheckFile.exe
aceddi.dll
acevidcap.dll
ahioem.dll
AudioGW.dll
BTAudioGW.dll
BtCeBCSPTrans.dll
BtCeIf.dll
BTCeOsif4.dll
btcepan.dll
BtCeProfiles.dll
BtCeSendToPoom.dll
BtCeStack.dll
BtContextMenuPE.dll
BtPhoneIf.dll
FrontLight.dll
HFPControlPanel.dll
Keybddr.dll
SdkCE.dll
SerialBTUR.dll
SerialCmd.dll
tiacxwln.dll
Wavedev.dll
wbtapiCE.dll
CeSetup.dll
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Be careful with some of the files u requested. Some of them are XIP device specific and will hang your device.
Re: Missing Files
henrylim said:
Be careful with some of the files u requested. Some of them are XIP device specific and will hang your device.
Click to expand...
Click to collapse
Correction. This update does not contain XIP DLLs. All DLLs are normal (not in eXecute-In-Place format), though lots of them are device-specific and would not work on other devices.
Does it work on xda lls ?
WHat is the steps to install ito my lls ? Thanks
WiFi
Thanks!
The BT update works on my MDA III.
I've seen the tiacxwln.dll. Is it an updated version?
Re: WiFi
RalfPPC said:
I've seen the tiacxwln.dll. Is it an updated version?
Click to expand...
Click to collapse
It is older than version used in 1.31 WWE ROM. And some other DLLs are also outdated.
I have a question:
Does anybody know what to delete in the bt list shown above that switches bt off when the pda is also off??? My bt stays on when the pda is off..
Thanks
does it work on i-mate Jam?
Hello,
it seems to be right: http://forum.xda-developers.com/showthread.php?t=363977
"newer WIFI driver, with this I have no problem with reconnecting Wifi after standby, not tested WPA , with driver not working LED signalling , that WIFI is ON."
i can confirm: wifi reconnect after standby works with this ROM!
But it's polish.
Can someone please extract that wifi driver ? and bringt it to a english ROM ? or a .CAB ?
incubus72 said:
Hello,
it seems to be right: http://forum.xda-developers.com/showthread.php?t=363977
"newer WIFI driver, with this I have no problem with reconnecting Wifi after standby, not tested WPA , with driver not working LED signalling , that WIFI is ON."
i can confirm: wifi reconnect after standby works with this ROM!
But it's polish.
Can someone please extract that wifi driver ? and bringt it to a english ROM ? or a .CAB ?
Click to expand...
Click to collapse
I TRY FOR YOU GIVE ME SOMETIME
incubus72 said:
Hello,
it seems to be right: http://forum.xda-developers.com/showthread.php?t=363977
"newer WIFI driver, with this I have no problem with reconnecting Wifi after standby, not tested WPA , with driver not working LED signalling , that WIFI is ON."
i can confirm: wifi reconnect after standby works with this ROM!
But it's polish.
Can someone please extract that wifi driver ? and bringt it to a english ROM ? or a .CAB ?
Click to expand...
Click to collapse
here you go run exe on pc
please can any one make sure if its working alright without any Bugs..i dont want to hardreset in case if necesarry
ather90 said:
please can any one make sure if its working alright without any Bugs..i dont want to hardreset in case if necesarry
Click to expand...
Click to collapse
it works for me
Hello,
strange, it doesn't work for me. i even tried with your ROM from http://forum.xda-developers.com/showthread.php?t=364881
i also tried the ROM from http://forum.xda-developers.com/showthread.php?t=343738
i have still 2 problems:
- most times i try to start with comm manager - i have to "turn on WLAN" first
- when both is on it doesn't find my WLAN on the 1st time - i have to turn it off with comm Manager - turn it on again - then it works.
how can we make sure we have that driver from http://forum.xda-developers.com/showthread.php?t=363977 ?
incubus72 said:
Hello,
strange, it doesn't work for me. i even tried with your ROM from http://forum.xda-developers.com/showthread.php?t=364881
i also tried the ROM from http://forum.xda-developers.com/showthread.php?t=343738
i have still 2 problems:
- most times i try to start with comm manager - i have to "turn on WLAN" first
- when both is on it doesn't find my WLAN on the 1st time - i have to turn it off with comm Manager - turn it on again - then it works.
how can we make sure we have that driver from http://forum.xda-developers.com/showthread.php?t=363977 ?
Click to expand...
Click to collapse
i ant got that rom ive got this one http://cid-c6ca8547e47a4a79.skydriv...o Hà Nội/ROM 6.1 OS 5.2.19716_hoangdat_VT.rar
Hello,
that's the same - right ?
http://www.4shared.com/file/37006216/cc45a4de/ROM_61_OS_5219716_hoangdat_VT.html
i tried this also - the same !
i don't get it. what else do you have - radio 1.15 ?
wow do you switch wlan on/off ? with the comm manager (wifi) - or with "turn wlan on" ?
Today I tested WPA-PSK TKIP and with my ROM and newer driver it's working.
hello johh,
yes i know it works with your rom. but your rom is only available in polish-right?
sorry, i dont speak polish-so i need a english rom.
thank you.
Now I have no time to prepare english version of ROM, maybe in weekend if you want I try make test cab with patch for you( but for WM6 - for me WM6.1 ROMS on BA are simple fakes - all which I analized ( 2 versions) have old WM6 core, only SYS part are taken from WM6.1).
hello,
that would be nice. please build a english rom or cab. wm6 is fine. for me the most important thing is, that wifi works (as in your polish version).
thank you very much in advance.
Hello,
When i go to the connectionManager, i see the bluethoot but not the WIFI !
Nevertheless, when i go in the wifitools, i can see my wifi card ( samsunf wlm, 54mbps.....)
Have you an idea ??
Great thanks !!
Nixeus said:
Hello,
When i go to the connectionManager, i see the bluethoot but not the WIFI !
Nevertheless, when i go in the wifitools, i can see my wifi card ( samsunf wlm, 54mbps.....)
Have you an idea ??
Great thanks !!
Click to expand...
Click to collapse
You are a senior member???
When you need help, you need to tell us the devices' name and currently installed ROM (official, or cooked ROM) and Radio.
oo sorry !
I have a MIO P550, and i have succed to port a wm6.1 rom, and the wifi functionned with my previous beta ! And here, , the wifi don't function and i don't succed to find where is the problem
MIO P550, with wm6.1 !
is not a driver problem, because,in my previous beta, it functionned !
Great thanks !
Radio?????????????
I had a similar problem with my xda stealth after upgrading....try soft reset few times and it may come back....for me it took more than 3 months
Hummm, it's not a pdaphone, but about the version of the wifi, in wireless tool :
UTILITY Version : 2.18
Firmware version : ( there is nothing )
Driver version : ( nothing )
Mac Adress : (nothing)
WLAN Status : ON
I don't hav other information
This might be a stupid question but this caught me out, but when I'm sync'd with my pc the wifi connection button etc did not show in the connection manager, I kept soft resetting, and then realized that be default activsync turns off wireless connections when connected. I had to set the option to allow it to work when connected.
I guess what I'm saying is your device connected to your computer when this happens?
This occurs with ASUS P525 and ASUS P535 also and we fix it with sorg Wifi fix.
It seems the shell load more faster than the Wifi driver.
Ask sorg for help or d/l my RK for Wm6.1 P525 at my signature.
In the OEM of the RK has the folder sorg Wifi fix.
Try it yourself.
vivi
I have rebuild all my kitchen and, wifi is OK !
Probably an error in my OEM folder !
Great thanks!
That happen to my XDA Stealth...
Anyone can give me some help?
please read this
This occurs with ASUS P525 and ASUS P535 also and we fix it with sorg Wifi fix.
It seems the shell load more faster than the Wifi driver.
Ask sorg for help or d/l my RK for Wm6.1 P525 at my signature.
In the OEM of the RK has the folder sorg Wifi fix.
Try it yourself.
vivi
Click to expand...
Click to collapse