hello all,
problem 1:
recently my exec has been dropping calls just as they connect. signal seems to jump up and down quite frequently and i'm not receiving some messages from abroad and some messages sent abroad don't make it to the receiver either.
that last issue may be a network issue as it seems to only happen randomly but is getting worse.
would a hard reset help much or is something else wrong here?
any insight would be much appreciated.
problem 2:
i want to disable or remove the voice command application that comes built in the exec (cybertronics?), i don't use it but it locks up the phone on odd occasions.
anyway to remove it without some extensive tinkering.
problem 3:
i remember a friend used to be able to connect his ipaq to his pc then run msn messenger on the ipaq (whilst cradled). is this possible with the exec as it doesn't seem to get a good wifi signal unless i'm right next to the wifi router.
i would have had a 4th problem but i just got AS working finally and jeyo mobile companion to go with it Very Happy
again, any help with any of these problems would be much appreciated.
regards,
haji.
having the same problem with signal. If i was in a location with no signal and i move to a location with good signal, the phone does not seem to detect this change. I have to reset the phone for it to get signal. so disapointed.... just sharing, sorry, ive got no solution.
For problem 3:
If you right click on ActiveSync icon in your system tray (version 4.2 not sure where the option i is on older versions) and choose "Connection Settings..." then there is an option which says:
"This computer is connected to:" and my copy was defaulted to "My work network", changing this to "The Internet" allows me to browse the internet using my computers internet on my XDA Exec.
I think this is what your friend would have been doing.
Regards
G
thanks gquipster! i'll try that out.
raffy, i've switched the phone over from 'auto' to gsm, that seems to have improved signals and i don't lose txts anymore. when set to auto it keeps trying to find the best 3g connection (i think).
if you don't need the 3g connection then try this:
start > settings > phone > band tab > change network type box from 'auto' to 'gsm'
i hope that helps a bit mate.
still got problem 2 to go then, any takers?
Related
Hello,
After performing a hard reset on my XDA Exec I used the various posts within the forum to set-up the machine. Of course one of the thinks I have set up as been the "My ISP" and "My Work Network" section to connect to the Internet via 3G. I also implemented the registry mod to have my 3G/GPRS connection always up.
Now here comes the problem bit ....
After a soft reset the 3G connection automatically comes up and am able to sync with the exchange server and surf the web. All seems fine. However after syncing with the USB cable, manually disconnecting the 3G connection or a making/receiving a phone conversation I am no longer able to connect to the net. Neither My ISP or My Work Network works any more. The error message I get is "No modem at above number...." I have double checked my connection setting and they all seem fine. Am at a loss to explain this.
Any thoughts?
TIA
Hi,
did you solve the problem. I have the same problem with my MDA Pro. When I change from wifi to gprs or modem I get the same error message. I have to turn off the telephone and back on and then it will work. This is really bad. Friends of mine at work have the same problem.
Any ideas?
Holger
Hello,
hmartin said:
...did you solve the problem. ...Holger
Click to expand...
Click to collapse
Sorry, no. Did not manage to fix it. I eventually returned the exec back to O2. Think I'll give it a couple more months while I do a bit more research and then re-upgrade to it again.
Regards
Hi guys,
I'm all new to your forum...
I have the o2 xdII, xdaIIs and now i'm using the xda Exec.
I have a strange problem that even o2 technical support team can't fix...
When i start internet explorer it will connect to either gprs or 3g (whatever is available). when i finish browsing the internet, i just close internet explorer and then close the connection by clicking the disconnect button. Where my problem is, is when i want to reconnect to the internet again (say 5 mins after i close the last connection), i cant get any connection whatsoever. I have a good receiption (gprs and 3g). And i have this weird message :
Dialed: mobile.o2.co.uk
The answering modem has disconnected. To check your connection settings and change them if needed, tap Settings.
So after a lot of talking with o2, i still have this problem.
I have tried to uprgrade to the new rom, and nothing, i have change the settings of the cennection, still nothing. i even changed the handset as i and o2 thought it could have been a faulty handset, but still nothing...
The only solution at the present is to do a soft reset everytime i want to connect to the internet... Its very annoying !!!!
Would annyone have a solution ??? Please ?????
Thank you in advance for your help....
Personally; I wouldn't suggest closing the connection and you won't get charged any extra.
this is easy to fix, but you will lose some software you've got installed.
I had this problem and have worked it out to be conflicts between software that handles the phone line. I had mortring, phonealarm and photo contacts pro installed and my gprs would not reconnect after the 2nd attempt. Putting the phone into flight mode and then back into normal mode would allow gprs to reconnect but only once.
So I uninstalled the above 3 applications one by one and found the gprs would reconnect great with only one installed (any one it didn't matter)
So try removing software that handles the phone line until your gprs reconnect works.
Daz
Hi, i have a very strange and unpleasant problem with my Hermes.. At home I am using my wifi connection to receive mails etc. My Hermes connects to the wifi network normally, but when I want to use internet connection (IE, Outlook..) it will start GPRS. I have to turn wifi of and back on to be able to use it. It is pretty annoying as you can imagine. Now I am using latest Tytn WWE rom, but i have had same problems with T-mobile rom.
My old Wizard is connecting normally and has never done something stupid like this Do anyone have some clue what may cause this strange behaviour?
Have you confirmed that the home WiFi connection is configured as 'Connects to: The Internet'? In comm manager turn off the WiFI then go into settings/connections/Network Cards and you will be presented with all the networks used or previously found by your TyTn wireless card.
Select you named home wireless connection and you will be presented with the screen "Configure Wireless Network". Make sure that the entry against "Connects to:" i sset to The Internet - then press OK (top right), then dismiss the settings windows.
Try the connection again - it worked for me a while back. If already set at "connects to the Internet" then try deleting the settings and creating the entry again: press and hold on the connection (your home WiFi) then select "Remove Settings". Then turn on networked and set it up again remembering to select "connects to the Internet" when asked during the configuration of the WiFi connection. Of course you will again be prompted for a network key if you have a secure wireless router.
- if you all this then sorry but you didn't say. Hope it helps
I have already set it to connect to the internet few days ago. But i will try to remove those settings and do it again.. Hope it will solve the problem.
Thanks for your help. I'll report later..
naciniak said:
I have already set it to connect to the internet few days ago. But i will try to remove those settings and do it again.. Hope it will solve the problem.
Thank's for your help. I'll report later..
Click to expand...
Click to collapse
Mine does the same thing and I am set the same way, even though it connects to GPRS etc it still uses the WiFi (ran speed test on IE to confirm)
Hi
I hear good things about Danielherrero's bandswitch app. This is a long thread and I think there are revisions along the way so best read through a sample of the pages:
http://forum.xda-developers.com/showthread.php?t=286844&highlight=danielherrero
Whether it will solve your particular issue I don't know - but worth a look?
Mike
mikechannon said:
Hi
I hear good things about Danielherrero's bandswitch app. This is a long thread and I think there are revisions along the way so best read through a sample of the pages:
http://forum.xda-developers.com/showthread.php?t=286844&highlight=danielherrero
Whether it will solve your particular issue I don't know - but worth a look?
Mike
Click to expand...
Click to collapse
Hmm.. I am already using that band switcher. Really a great program but unfortunatelly it cannot solve this issue.
But.. I can see a light at the end of the tunnel I've deleted my network settings and than set it again. And now it seems to be working! Hmm.. cannot be quite sure if it isn't just lucky day, but I've tested it more than 10 times and it seems to be OK.
Anyway... thanks for your help
Hopefully it will continue to work.
PS Is "cancer man" still alive or have the ciggies killed him off?
Mike
Glad to hear it worked OK. I too found it was teh only way to get mine initially working - since deleting and recreating the link it has worked OK (3 mths plus)
Aaah.. I heard that cancer man is still alive. But.. trust no one Hope he will not follow the Marlboro Man..
And by the way.. After few hours it still seems to be working. Thanks guys!!
Out of a month of use it has happened to me only once. I just turned off wifi then turned it back on. I believe the tytn is not recognising that it has a valid Internet connection.
Hi guys. If you don't remember me - here's my story in a nutshell. I got a 8525 about a week ago. Since day one I tried and tried and tried but never managed to get the wifi working... (as you can imagine I am beyond desperate at this point)
Anyway last night I got thinking and decided to give it another stab. I hard reset, messed with the settings again...and this time manage to get a little further. My phone is now showing me as "connect to network", only problem is I get a message saying "Cannot connect with current connection settings. To change connection settings, tap Settings." each time I try to access anything internet related. I know I'm close especially since I'm actually connected now, I think it's just AT&T's rom doing everything it can to get me to use their networks (I'm on T-Mobile and don't have a dataplan anyway...).
Anyway can you guys think of what the problem might be? I'm so close I can taste it! Thanks.....
Bump... Anyone home?
where did you get your 8525? my wifi on my 8525 works perfectly fine, have u tried upgrading to WM6?
I have WM6 already. I got it off ebay. Everything is perfectly fine with it, it just doesn't want to use the wifi connection to get online.
Try a hard rest.
my 1st 8525 i got off ebay, and it worked great up until a few weeks ago, when the screen stopped functioning it just turned white, i called AT&T and they sent me a new 1 i just got it this morning and now, i cant make calls >.> it will ring then my phone will say i have no service when i have full service and the call will end. but my wifi is fine... did u use the WM6 upgrade that was released by AT&T
No thanks re: the hard reset. I've already done that... If I can't figure this out I'm going to sell my phone and steer clear of ppc phones. I like it, but I bought it for wifi and this is just getting ridiculous. I have tried everything. I've spent hours and hours on this. I've reset my router god knows how many times, played with security settings, reset my phone over and over to start over.....
The worst part now is that I know it's connected. The wifi aspect is fine. It's just the stupid phone not wanting to use the wifi connection for the internet.
Maybe someone with a 8525 and a Linksys router can post ALL of their wireless related settings for me.
Ekh
Yes I used the AT&T update.....
i use wifi and my linksys router, the 8525's range isnt that great u need to be within a few feet of the router to get good reception, im about 30 feet from mine and i get 2 Wifi signal bars and an ok speed. but try this
Start > Programs > Proxy Manager > Disable Proxy
then try to use your wifi, then go back and restore the proxy when your done, i think some 1 told me to do that because att uses that so u can use their internet service or sumthin
Thanks but I'm way ahead of you. I've already tried every piece of advice I've come across on xda. My last hope is someone elses detailed settings.
is your network passworded by a WEP or TKIP ?
It's WPA... My device has the password, and I added the MAC to my router table. It's connecting to the router/wifi...
...it's just that my device won't use the connection
* Sigh * Looks like another one of my please help me posts has gone dead...again...
olly666 said:
...it's just that my device won't use the connection
Click to expand...
Click to collapse
Your problem may be one of the following:
1. The wifi connection is specified as connecting to "work" and programs are set to use an internet connection.
2. The wifi connection is specified as connecting to "internet" and programs are set to use a work connection.
Nope that's not it. But it does remind me of something so thanks. I deleted all the connections seeing as I don't have a dataplan... I made a new connection called "Wifi". BUT, it's not like I can specify any connection for it so it's just blank (no connection specified). By this I mean the options for a connection are:
bluetooth, cellular line, cellular line (GPRS, 3G), Generic IrDA, Hanes...COM1. No option for wireless...
Does that help?
Check that your router is set to allow connections by devices with 802.11b, which the Hermes uses. Most default to 802.11g only.
It's set for b and g
Helloooo...?
Hallelujah!!!!!
People, I have WIFI!!!
Thanks to everyone who tried to give a helping hand... It's really appreciated.
For future reference to those who are suffering from the same problem - this is what seemed to fix it... I entered google into IE via it's IP address rather than it's name (open command prompt, ping google.com...). To my surprise the page quickly loaded. I then instantly realized that the problem was with the DNS settings. I opened up "Wi-Fi" in settings, went to the "Network Adapters" tab at the bottom and entered in the DNS addresses for "IEEE 802.11b/g...". If you need help with this just PM me (I consider myself somewhat of an expert on this topic now).
I thought I was never going to get online. There IS a god!
Hey,
I have my tytn set to check emails every 5 minutes using my homes wifi connection. My problem is every once in a while i'll look to find GPRS has connected... this is really annoying me, as i don't know then if email is being checked using wifi or GPRS which costs. MAINLY though bcause I don't know WHY it is doing it.
In connections, my top selection is CONTRACT INTERNET which holds my gprs connection settngs and the bottom one is my work network. the slightest change in either of these STOPS INBOX from checking over wifi giving me an ';error synchronsing message;'
Can anyone tell me WHY my tytn persists with this?
thank you
hey, well incase anyone is reading and looking for a short term fix, UNTICKING the remember password box in gprs settings means if it attempts to dial, it CAN'T connect without the password being ntered. not ideal, but it at least stops any nasty surprises when you don't expect them
I had the same issue with WM 5. After upgrading the device to WM 6 this problem was solved for me.