Hi
Without going through every application how can I setup the connection options to only automatically connect when wifi is available or when docked. Idealy I would like to be prompted to connect via GPRS or 3g network? Any reg hacks on this one?
Regards
Eric
GPRS connection disable or prompt
hi, I'm having the same issue as above...would like to connect to GPRS manually only.
anyone !??!
me to, i am only on a limited plan for gprs/3g and the costs are quite high 2c p kb.
i use wifi at home a lot, so usually not a problem, but dodgy activesyncs to exchange server, or accidentally opening IE auto connects 3g gprs without prompting.
Any hacks, or software that anybody knows about.
I also need this, i ran my bill up without knowing/wanting to
simon_darley said:
accidentally opening IE auto connects 3g gprs without prompting.
Click to expand...
Click to collapse
I have changed my default IE page to "about:blank" - at least it means that IE doesn't go off trying to load a page by default that I'm most likely not interested in, but it also prevents it from connecting GPRS/3G should you start it by accident.
Cheers,
Steve.
Has anyone had any luck with this? I also am on an expensive tariff and unwanted connections prove costly. I have not yet found the answer, but will keep you all posted if I stumble across a setting/hack.
Would also like some tips on this, dont know whats dialling up 3g, but everytime i looked at my phone it was bloody connected grrrr.
Im also intressted, i need like a on/off button for the gprs. My damn egress updates my blogs/rss streams all the time. I have disable autoupdate in egress but it still wants to update sometimes :/
I've found nothing yet and have resorted to removing my GPRS settings until sorted.
I will crack open C# and attempt my first PDA utility - with the aim being to prevent GPRS/GSM from connecting unless something is manually toggled. Wish me luck
dudes, this has been posted a few times already
it's a part of the t-mob ext rom.
enjoy
joe
joebongo said:
dudes, this has been posted a few times already
it's a part of the t-mob ext rom.
enjoy
joe
Click to expand...
Click to collapse
What does this cab file do exactly? Does it give you an option to manualy connect or does it turn GPRS off completely? Plus where can we find the option to turn it ON if we can?
One more thing please, can I install this cab file on my O2 XDA Exec without any conflicts since it was made for T-Mobile?
I am not 110% but I believe it appears in a number of carrier ext roms, and just stops GPRS from being attached all the time (like an idle disconnect perhaps?)
When you want GPRS, then you can connect by starting the application you want (ie : Internet Explorer) and GPRS kicks in.
Hope it helps.
Joe
couldnt find it in mine, using the imate jj.
will install and see what happens....
using vijay's method http://forum.xda-developers.com/viewtopic.php?t=37963
you still get the msg that it is trying to connect and eventually an error msg, but better than a big phone bill
Hi guys !
I've installed the .cab on my 9000 and G icon is now disappeared
In the future will be possible to uninstall the .cab and restore the icon ?
Thanks :wink:
My o2 wapflat ist working fine most times. and i use pushemail trough this also. but sometimes the gprs connection im using 24 hours a day shows that is is connected but no more sync or even internet works. if i try to reconnect i dont even get a connection to gprs. Only a softrest does help.
Can somebody help?
P.s. I did not install the crappy o2 software from ext.rom
Hallo Sebi
Cannot help you much, only report that with Base flat and Cortado Direct Push I experience no such problems. If GPRS signal is lost out of coverage the device automatically reconnects, and the device never shows GPRS running when in fact there is no connection. Maybe there is a GPRS sensitivy setting in the registry, but I can only speculate. Good luck.
I think the problem is comming from phonealarm. i just get the new beta an know the problem is gone.
This happen since I was using Atom last year, I have changed to Atom Exec and now Atom Life, the problem is still existing in all version of Atoms.
My Atoms were no problem to connect to GPRS/EDGE, Internet Browsing, Email and O2 Connect were working perfectly. When I ever connect them to a wifi access point (wifi connection also ok for all kind of applications), after wifi was turn off, the GPRS/EDGE is not working any more, the symptom as follow
1. O2 Connect cannot establish the GPRS connection automatically
2. PIE cannot browse any website or takes very long time to show up the website.
3. PIE can still browse website with ip address (ie. http://123.123.123.123), page will be display almost instant
4. Soft Reset cannot fixed this problem
5. Only way to fixed this problem is delete all the wifi profiles and make a soft reset. Of course Hard Reset can fixed this problem too.
6. If a full system backup after the problem happened, Hard Reset and after restore the problem will come back again.
7. In some unknown situation, the problem will be gone even don't have delete the wifi profiles.
Hope somebody can give me some hints how to fix it.
Many thanks!
Does atom and atom exec has 3G and Gprs/edge in it, as in official site it is not mentioned?
Atom and Atom Exec has no 3G. They top out at EDGE. ROT - 3G is a popular feature, and marketers will jump at the chance to say their phone can connect to it. If it is not mentioned, it definitely doesn't have that feature.
As for the PIE issue - try using an alternative browser, like Opera. I think Microsoft left out the Autodetect Proxy Settings when they ported IE to PPC. -.-
dollardollar said:
Does atom and atom exec has 3G and Gprs/edge in it, as in official site it is not mentioned?
Click to expand...
Click to collapse
Atom and Atom Exec only support GPRS/EDGE, no 3G or HSDPA.
Hey,
I have my tytn set to check emails every 5 minutes using my homes wifi connection. My problem is every once in a while i'll look to find GPRS has connected... this is really annoying me, as i don't know then if email is being checked using wifi or GPRS which costs. MAINLY though bcause I don't know WHY it is doing it.
In connections, my top selection is CONTRACT INTERNET which holds my gprs connection settngs and the bottom one is my work network. the slightest change in either of these STOPS INBOX from checking over wifi giving me an ';error synchronsing message;'
Can anyone tell me WHY my tytn persists with this?
thank you
hey, well incase anyone is reading and looking for a short term fix, UNTICKING the remember password box in gprs settings means if it attempts to dial, it CAN'T connect without the password being ntered. not ideal, but it at least stops any nasty surprises when you don't expect them
I had the same issue with WM 5. After upgrading the device to WM 6 this problem was solved for me.
Reflashed my Jade from UK Orange to JADEMAN rom recently...
I don't think this is a ROm related problem (unless you know otherwise !) so I have posted in general part of forum.
Can anyone tell me how to force the phone to use Wifi to connect to the internet.
It connects via GPRS fine but i want to disable the GPRS DATA for travels abroad so I don't run up a huge data bill. I can stop the data with "NoData" app, but if I now try to connect to internet with Opera or Internet explorer if fails..
Is there something I am missing, to tell it either to connect via wifi before using GPRS data or to only connect via wifi. Do I need to create a connection ?
The create new connection page doesn't list using WiFi, bluetooth is the only "WIRELESS" type connection that appears to be offered.
Also when the wireless AP list is shown and I try to connect to an AP showing available that I have previously setup with WEP key etc, it fails to connect.
I am sure to be missing something but I can't spot what the problem is...
Any help appreciated.....
Phil
Normally Windows Mobile connects via WiFi first, if available, and only when not present it uses GPRS. That means that you do not need to disable GPRS if an WiFi-connection is established.
I have no personal experiences with "NoData". Perhaps someone else can help.
phil-w said:
Can anyone tell me how to force the phone to use Wifi to connect to the internet.
It connects via GPRS fine but i want to disable the GPRS DATA for travels abroad so I don't run up a huge data bill. I can stop the data with "NoData" app, but if I now try to connect to internet with Opera or Internet explorer if fails..
Is there something I am missing, to tell it either to connect via wifi before using GPRS data or to only connect via wifi. Do I need to create a connection ?
The create new connection page doesn't list using WiFi, bluetooth is the only "WIRELESS" type connection that appears to be offered.
Also when the wireless AP list is shown and I try to connect to an AP showing available that I have previously setup with WEP key etc, it fails to connect.
Any help appreciated.....
Phil
Click to expand...
Click to collapse
MvBoe said:
Normally Windows Mobile connects via WiFi first, if available, and only when not present it uses GPRS. That means that you do not need to disable GPRS if an WiFi-connection is established.
I have no personal experiences with "NoData". Perhaps someone else can help.
Click to expand...
Click to collapse
AFAIK the moment you invoke any app that requires internet connection (weather update, activesync, opera) Jade invokes data connection first (3G, GPRS, etc) That's how it works on my set. Unless you invoke Wi-Fi connection first, then data connection is ignored.
I have had a bad experience that even if all setups are ok Wi-Fi conn thru Ap fails.
Corrected such a way;
Under 'Wireless /Lan' settings
Power mode should be brought to 'best performance'
azahidi said:
AFAIK the moment you invoke any app that requires internet connection (weather update, activesync, opera) Jade invokes data connection first (3G, GPRS, etc) That's how it works on my set. Unless you invoke Wi-Fi connection first, then data connection is ignored.
Click to expand...
Click to collapse
That's what I meant: You have to activate WiFi by yourself to prevent jade using GPRS (etc.). Your description is more precise, I did not make it clear enough. Thanks for correction.
Hi and thanks for replies so far...
I have just done a hard reset to make sure I haven't loaded anything that may mess up the wifi connection... Even when wifi is on and I am connected to a wifi access point OK it still uses gprs/3g not wifi..
Back to the "drawing board" I think...
Any more ideas please...
Phil-w
with this app you can disable or enable data connections as you please.
there is another app here in the xda that will disable data when roming automatically, but i don't remember the name.
faria said:
with this app you can disable or enable data connections as you please.
there is another app here in the xda that will disable data when roming automatically, but i don't remember the name.
Click to expand...
Click to collapse
Hi faria
Unfortunately I find it better to go into connection manager, select airplane mode, then enable wifi. Then do any surfing, live messenger etc. Then once finished go back into connection manager, re-enable phone.
Like others, I'm on Orange, wifi no longer stays the internet source even if it is connected. I have it on all the time, but if I use the internet, I have to go through the above procedure or it costs me credit through Orange.
Janeway
janeway said:
Unfortunately I find it better to go into connection manager, select airplane mode, then enable wifi. Then do any surfing, live messenger etc. Then once finished go back into connection manager, re-enable phone.
Click to expand...
Click to collapse
The only disadvantage is here is that, you'll miss calls when there are incoming calls because your phone is inactive (while PDA is). You can just disable data connection (CommManager - Data Connection - off) and leave wi-fi connected.
Like others, I'm on Orange, wifi no longer stays the internet source even if it is connected. I have it on all the time, but if I use the internet, I have to go through the above procedure or it costs me credit through Orange.
Click to expand...
Click to collapse
Just wondering.. how you identify which connection is being used, wi-fi or 3G/GPRS when both are connected.
What if you disconnect data connection (3G/GPRS) without activating the airplane mode, can you surf using wi-fi connection.
One possible reason - set connected to the AP via wi-fi but AP is not connected to internet, thus set seeks 3G as another route to internet.
Hi azahidi, thanks for taking time to reply to me . Your points as follows:
Yes, missing calls is the disadvantage, but I use my pda more for data and hardly any calls, so not so important for me, but obviously we be much better if that were possible as I do sometimes forget to swich back. If I disable the data connection, it automatically re-initializes itself as soon as ANY data is being transmitted - even with just wifi active - except when it is in airplane mode. This is a new thing for me with the Jade, didn't have that problem before with my previous HTC phone.
There is an icon for the 3G - when its in use it shows it - it goes from being a large G in a square to a smaller one with signal bars.
Wifi is definitely connected, I surf online with it all the time.
Its like 3G has priority over wifi - there should be a way to change that.
Hope the above makes sense.
Janeway
I'ven been using 'Nodata' succesfull the last past months, it does it's job well, but i'm not on Orange as you are, that might be the difference.
Just to be sure i've also changed my settings:
start > settings > connections > connections > advanced > select network > My work network (twice).
and
start > settings > connections >advanced network > uncheck HSDPA and in SMS choose 'GSM'
(all is translated from Dutch, hope i used the right words)
Thanks Nirak.
One of my settings was wrong - I should have known that from last time, but my brain's elsewhere at the moment!
Must have upset it when I flashed
Cheers for now.
phil-w said:
Hi and thanks for replies so far...
I have just done a hard reset to make sure I haven't loaded anything that may mess up the wifi connection... Even when wifi is on and I am connected to a wifi access point OK it still uses gprs/3g not wifi..
Back to the "drawing board" I think...
Any more ideas please...
Phil-w
Click to expand...
Click to collapse
Phil, can't you simply switch the "Data Connection" on/off switch to 'off' ?
I have it in the Comm Manager right at the bottom. The Wi-Fi and Phone could be left 'on'. I can't try if it works because I only use the phone on 2G.
Joe
jfranek said:
Phil, can't you simply switch the "Data Connection" on/off switch to 'off' ? I have it in the Comm Manager right at the bottom. The Wi-Fi and Phone could be left 'on'. Joe
Click to expand...
Click to collapse
That's how it should work actually. Either one, Wi-Fi or 3g/GPRS. But what phil is saying is that it also activates data connection (3G/GPRS) even when wi-fi is connected.
On my set, and in my network (not Orange but standard GSM).. this is how it works :
The moment I invoke any application that requires internet connection (weather update, activesync, opera, etc) Jade invokes data connection first (3G, GPRS, etc). Unless if I invoke Wi-Fi connection on first, then data connection is ignored, it will stay off.
So what I normally do is, whenever I want to use internet, I connect using wi-fi then browse the internet. If there is no available AP, then I turn off wi-fi and continue browsing , which is then connected using 3G/GPRS/EDGE?HSDPA
azahidi said:
(...) The moment I invoke any application that requires internet connection (weather update, activesync, opera, etc) Jade invokes data connection first (3G, GPRS, etc). Unless if I invoke Wi-Fi connection on first, then data connection is ignored, it will stay off.
So what I normally do is, whenever I want to use internet, I connect using wi-fi then browse the internet. If there is no available AP, then I turn off wi-fi and continue browsing , which is then connected using 3G/GPRS/EDGE?HSDPA
Click to expand...
Click to collapse
This is the way it normally works and should work under WindowsMobile. The Orange-ROM seems to be "manipulated" by the provider (?) not to work in this desirable way. All (or some?) Orange-ROM-Handsets seem to activate the data connection (3G/GPRS) every time ignoring the established Wi-Fi-connection. This rises the providers business volume.
It would appear to be correct about orange having had the method of connection changed.
I have just found and installed a different RADIO.ROM to my Orange Touch 3G and now it appears to connect as required.
Still not 100pc happy but will post my observations later with the rom numbers if it helps anyone else out..
Phil-w
Look on the HTC JADE reflashing on this site
Hi All,
There is no way around the Orange apps to enable WiFi, but I successfully reflashed the Roms in my Orange touch 3g yesterday.
Have a look here for the details on what to do:
http://forum.xda-developers.com/showthread.php?t=514406
Follow the instructions carefully, and I chose to install the Stock HTC ROM 1.40.721.2 from the ROM post.
Wifi is then free....
)
Well I appear to have got around the Orange Unique problem.
I upgraded the Rom on my Orange UK Touch 3G to the Jademan SuperRom V3. That got rid of the Unique side of things but with no improvement with Wifi connectivity.
The connectivity problem with wifi still caused problems, the internet connection would NOT use wifi even if I disabled the GPRS / 3G data connection with "NoData" It just returned a message saying it had failed to connect.
I decided to find a new radio rom image which I managed to on this Jade forum. I flashed the new rom and tested the same connections again. This time the wifi connected via Wifi first and without any problem... It would appear that flashing the Jademan rom didn't update the radio as well, I needed to update the radio as well.
The clue may be in the radio rom version number,
Original orange 0.29.30.U23
New Radio rom 0.41.30.12
A assume that the U in the orange rom refers to "Unique", which now I have replaced it, it appears to have cured the wifi problem and it is working just as any other Non-Orange Jade / Touch 3G does....
I have not noticed any problems with any other radio related issues since the upgrade, GPS, 3G/GPRS etc all seem to be fine.
I do find that the phone does struggle to connect with some Dlink AP's though... It may be a problem with the Dlink more than the phone but I still need to do more tests on that.
May be that will help a few other people out there...
Phil-w
Hi Phil,
I had exactly the same problem!
Started with an unlocked HTC Touch 3G with Orange customised ROM and then replaced it with the SuperROM. WiFi was unusable so (having read your post) I re-flashed with the standard ROM released from HTC and then re-flashed the SuperROM. This gave me the same Radio ROM that you show above however the WiFi problems seemed to be no better.
While I liked the idea of having the SuperROM I have gone back to the latest standard HTC ROM and all seems to be well.
John
Hi John,
My wifi now seems fine except not liking Dlink AP's for some reason.
I don't even need to stop gprs data with NoData etc, if there is a wifi connection available that I have setup previously it will use that rather than GPRS..
I appear to have "de-Oranged" it !!!
What probs do you still have on your Touch 3G ??
Phil