Hi All,
I have MDA compact unlocked. When I use a in car charger, it does not charge the phone when I plug the cable into the phone.
I have to do a soft reset with the USB cable attached and then the orange LED will come on. Now, I do not always want to do a soft reset everytime that I wanna charge my phone in the car. Hows anyone had this problem?
Thanks in advance.
im using an orange spv c500 car charger and mines working fine? what charger do you have? motorolla? spv? imate?
I brought one from ebay. so most likely to be a third party make.
How much is your charger?
I think you need the fifth pin connected to ground. This is what the original chargers do. You can either buy a special car cable for the SDA-Music or Magician, or cut the existing cable of your power supply and solder it correctly (Pin 5 to ground). What I did was to solder a 5V car adapter together with the cable of the Magician (Pin 5 to ground), the cable of my GPS mouse and of my BT Headset. You can do that too, provided that the car adapter delivers enough power (800 mA to 1 A) and all the devices you want to load are 5V ones.
£7.99 from orange.co.uk was free delivery when i got it
£7.99 from orange.co.uk was free delivery when i got it
I have been after a car charger for my Exec and as O2 dont sell one i searched ebay for one. There are loads on there so bought one and it was deliverd in 2 days. But it dont work (the charger has a sticker on it saying its for motorola v3) I have emailed the seller 3 times and he wont reply. I will be reporting him to ebay. But i wanted to warn you all to avoid the seller by the ebay user name of siennacommunications.
If anyone out there has bought a car charger for thier exec then i would like to know where you bought it thanks.
I got my car charger from gpsforless.co.uk
www.dsldevelopments.co.uk
is the website of a chap on here called Bryson. He's a Brodit distributor and in fact I got my passive cradle from him. I even later bought a proper USB charger from there, both work a treat.
Cheers
Ant
Blackberry charger works
hi, I too fell into the ebay trap. So I shopped around and bought a Blackberry in car charger from vodaphone shop for £10. works a treat and doesn't look cheap.
Hope that helps
Re: Blackberry charger works
The car chargers from Orange shops @ 9.99, intended for the SPV C500 / SPV C550 / SPV M500 / SPV C600, also work fine (they're HTC devices, after all).
Re: Blackberry charger works
Ineedtoys said:
The car chargers from Orange shops @ 9.99, intended for the SPV C500 / SPV C550 / SPV M500 / SPV C600, also work fine (they're HTC devices, after all).
Click to expand...
Click to collapse
I tried the blackberry charger from O2 but it didnt seem to work correctly i.e it took around 5 to 10 mins before it started to charge, if at all. So i took it back and one of the O2 staff that gave me a refund said that they shouldnt of sold it to me.
I think i will try the one from Orange, because like you said it is a HTC device. And if there were any problems then at least i could get my money back.
BTW that twat from ebay still wont get in touch with me for a refund.
Universal Charger
Got my accessories from www.gpsmidlands.co.uk.
Also selling proper mounts for the Exec
Anton.Valleyman said:
www.dsldevelopments.co.uk
is the website of a chap on here called Bryson. He's a Brodit distributor and in fact I got my passive cradle from him. I even later bought a proper USB charger from there, both work a treat.
Click to expand...
Click to collapse
I used Bryson as well. Quite happy with the solution as well. I got the brodit clip and a window stalk from him.
Motorola V3 charger
-----------But it dont work (the charger has a sticker on it saying its for motorola v3)------------
Hi, I have an i-mate Jasjar and a Motorola V3, and I can use the V3 charger with the Jasjar, the only problem is that the V3 charger has an output of 550mA and the Jasjar charger has (should have) 1000mA.
The only way I managed to charge my Jasjar with the V3 charger is to power it off with the button, closing the lid with the Jasjar in Portrait mode and plugging the V3 charger in to the mini USB port of the Jasjar, you should see the charging led of the Jasjar (in UR case O2 EXEC) turn on Ambar it will take about 5 seconds.
Hope this helps
I swapped the curly cable from my Brodit Active cradle for a regular USB cable with a cigarette light/USB adapter, but it didn't work at first. For some reason pin 4 (which isn't normally wired up in a 4pin to 5 pin plug) had to be connected to pin 5. That might be the problem you are suffering from with the non-Exec/HTC cables.
Cheers,
Steve.
o2 car charger
just seen an o2 car charger in the o2 shop today price 14.99
Ive just ordered a hollux slim gps, a mount/cradle from dsldevelopments and a cigerette lighter to 2x usb port adapter from ebay. Only just ordered, waiting for everythign to come at the moment. The adapter is just a cigerette lighter with 2x full size usb ports on back of it, rated at 5v/7.2A, im assuming I can use the supplied usb cable that come with the exec and plug it into this to charge? (along with the gps at same time).
pyrom said:
Ive just ordered a hollux slim gps, a mount/cradle from dsldevelopments and a cigerette lighter to 2x usb port adapter from ebay. Only just ordered, waiting for everythign to come at the moment. The adapter is just a cigerette lighter with 2x full size usb ports on back of it, rated at 5v/7.2A, im assuming I can use the supplied usb cable that come with the exec and plug it into this to charge? (along with the gps at same time).
Click to expand...
Click to collapse
No, that's the point I was making - that configuration didn't work for me (or my colleague). The standard USB cable that has a USB A at one end and the USB B Mini at the other doesn't have pin 4 wired up in the Mini B, and so doesn't charge the Exec. I had to splice open my moulded plug, and put some solder on pins 4 and 5 to make it work.
Cheers,
Steve.
thx, i was vague (i hope ) by supplied cable, I mean the orginal exec-usb cable that came with the exec, not a generic one. The connectors on the cigerette lighter are full size usb A sockets, not plugs.
StevePritchard said:
...The standard USB cable that has a USB A at one end and the USB B Mini at the other doesn't have pin 4 wired up in the Mini B, and so doesn't charge the Exec. I had to splice open my moulded plug, and put some solder on pins 4 and 5 to make it work.
Click to expand...
Click to collapse
This is weird: I'm charging my Exec using a USB cable that came with my Canon camera and I keep the original Exec cable in my laptop bag for emergencies.
The Canon cable works fine and charges my Exec no probs. Wonder why. Maybe digicam cables also have the pin arrangement you describe?
I have now emailed the prick i bought the car charger from 5 times (ebay) and he is still ignoring me. Do you guys think i should post his email address on here so the UNIVERSAL community can have a go at the twat, or do you think i should cut my losses and move on. After all it is only £5.49 ive lost, but its the first time ive had this trouble from an ebay seller and its winding me up. WHY WONT HE RETURN MY EMAILS?
Leave a neg feedback and open a dispute case would be my advice.
try a guy on ebay 'solwareltd'
i have bought 3 cradles from him Arkon type with car charging systems built in and they worked a treat. Xda2s and Xda2i were perfect as windscreen mounted aswell as charging.
the Exec version i have to mount upside down as the mini USB is obxtruced by the side clamps but with 'rotate screen' option in TomTom this proved not to be a major problem at all.
Trustworthy and reliable i have found this guy to be and i recommend him to anyone whos after the car options for HTC devices.
thanks
SiliconS said:
StevePritchard said:
...The standard USB cable that has a USB A at one end and the USB B Mini at the other doesn't have pin 4 wired up in the Mini B, and so doesn't charge the Exec. I had to splice open my moulded plug, and put some solder on pins 4 and 5 to make it work.
Click to expand...
Click to collapse
This is weird: I'm charging my Exec using a USB cable that came with my Canon camera and I keep the original Exec cable in my laptop bag for emergencies.
The Canon cable works fine and charges my Exec no probs. Wonder why. Maybe digicam cables also have the pin arrangement you describe?
Click to expand...
Click to collapse
The interesting thing is that regular USB cables work if plugged into a PC, it's just when they are plugged into these cigarette lighter adapter devices. My setup in the car actually has one of those with a two port USB hub plugged into it, and that required the mod I mentioned.
Cheers,
Steve.
Ebay seller has just emailed me (after 4 days and six emails to him) and admits he sent the wrong charger. He says he will send me a charger for C500 which he says will do the EXEC. I hope hes right for his sake!!
In my desperation to find a car mount that connects straight into the cigarette lighter so that I don't have to screw/stick one on to the dash, I have been thinking about getting one that's meant for another kind of PDA that hopefully has the same connector as the TyTN.
On Gomadic's site on this page: http://www.gomadic.com/car-auto-mounts-cat.html
they list the HTC: Blue Angel, Falcon, Harrier, Himalaya, Wallaby, Prophet, Apache, Magician, Prodigy, Wizard & Galaxy.
Is anyone sure about whether any of those have the same USB connection as the TyTN? The company makes fantastic mounts which is why I want to get another one from them to replace the one I used for my XDA II.
the power adaptor from the Wizard will work with the TyTN.
Thanks!
I checked this out using pictures from the net and saw it was the same! So I've ordered a suitable holder from Gomadic.
Standard mini-usb, but with an optional extension for their pain in the a$$ audio output/headset. But any mini-usb is fine for power.
V
vijay555 said:
Standard mini-usb, but with an optional extension for their pain in the a$$ audio output/headset. But any mini-usb is fine for power.
V
Click to expand...
Click to collapse
Actually, not completely true!
While any mini-USB cable should be fine for ActiveSync/desktop charging, not all DC mini-USB chargers are alike! There is definitely a specific voltage/wiring configuration requirement required for DC charging the TyTN.
Make sure you pick a charger that is compatible with the Wizard or the Universal, and you'll be fine... Others may or may not work!
The mini-usb for charging has extra pins connected to start charging.
Simplest method is to buy a charger that has a normal USB output (anything from 300mA up will do) best to buy a travel one that has interchangable UK/Europe/US mains heads and a 12/24V cigarette lighter adapter.
Chop the cable off your TyTn mains charger close to the power head and fit a standard USB connector to the cable.
Voila! you have a mains/mobile charger that DEFINITLY works mobile...
need to buy 3-4 of these. One for car/work and 2 for home. I have found some have not worked in past and many break easily/stop working. What type of cable do i Need if i'm buyiong unbranded on ebay. I was wondering if anyone had a cheap supply. I live in the UK.
I just mini-USB cable, any mini-USB cable will do