Hi All,
I have MDA compact unlocked. When I use a in car charger, it does not charge the phone when I plug the cable into the phone.
I have to do a soft reset with the USB cable attached and then the orange LED will come on. Now, I do not always want to do a soft reset everytime that I wanna charge my phone in the car. Hows anyone had this problem?
Thanks in advance.
im using an orange spv c500 car charger and mines working fine? what charger do you have? motorolla? spv? imate?
I brought one from ebay. so most likely to be a third party make.
How much is your charger?
I think you need the fifth pin connected to ground. This is what the original chargers do. You can either buy a special car cable for the SDA-Music or Magician, or cut the existing cable of your power supply and solder it correctly (Pin 5 to ground). What I did was to solder a 5V car adapter together with the cable of the Magician (Pin 5 to ground), the cable of my GPS mouse and of my BT Headset. You can do that too, provided that the car adapter delivers enough power (800 mA to 1 A) and all the devices you want to load are 5V ones.
£7.99 from orange.co.uk was free delivery when i got it
£7.99 from orange.co.uk was free delivery when i got it
Related
I have been after a car charger for my Exec and as O2 dont sell one i searched ebay for one. There are loads on there so bought one and it was deliverd in 2 days. But it dont work (the charger has a sticker on it saying its for motorola v3) I have emailed the seller 3 times and he wont reply. I will be reporting him to ebay. But i wanted to warn you all to avoid the seller by the ebay user name of siennacommunications.
If anyone out there has bought a car charger for thier exec then i would like to know where you bought it thanks.
I got my car charger from gpsforless.co.uk
www.dsldevelopments.co.uk
is the website of a chap on here called Bryson. He's a Brodit distributor and in fact I got my passive cradle from him. I even later bought a proper USB charger from there, both work a treat.
Cheers
Ant
Blackberry charger works
hi, I too fell into the ebay trap. So I shopped around and bought a Blackberry in car charger from vodaphone shop for £10. works a treat and doesn't look cheap.
Hope that helps
Re: Blackberry charger works
The car chargers from Orange shops @ 9.99, intended for the SPV C500 / SPV C550 / SPV M500 / SPV C600, also work fine (they're HTC devices, after all).
Re: Blackberry charger works
Ineedtoys said:
The car chargers from Orange shops @ 9.99, intended for the SPV C500 / SPV C550 / SPV M500 / SPV C600, also work fine (they're HTC devices, after all).
Click to expand...
Click to collapse
I tried the blackberry charger from O2 but it didnt seem to work correctly i.e it took around 5 to 10 mins before it started to charge, if at all. So i took it back and one of the O2 staff that gave me a refund said that they shouldnt of sold it to me.
I think i will try the one from Orange, because like you said it is a HTC device. And if there were any problems then at least i could get my money back.
BTW that twat from ebay still wont get in touch with me for a refund.
Universal Charger
Got my accessories from www.gpsmidlands.co.uk.
Also selling proper mounts for the Exec
Anton.Valleyman said:
www.dsldevelopments.co.uk
is the website of a chap on here called Bryson. He's a Brodit distributor and in fact I got my passive cradle from him. I even later bought a proper USB charger from there, both work a treat.
Click to expand...
Click to collapse
I used Bryson as well. Quite happy with the solution as well. I got the brodit clip and a window stalk from him.
Motorola V3 charger
-----------But it dont work (the charger has a sticker on it saying its for motorola v3)------------
Hi, I have an i-mate Jasjar and a Motorola V3, and I can use the V3 charger with the Jasjar, the only problem is that the V3 charger has an output of 550mA and the Jasjar charger has (should have) 1000mA.
The only way I managed to charge my Jasjar with the V3 charger is to power it off with the button, closing the lid with the Jasjar in Portrait mode and plugging the V3 charger in to the mini USB port of the Jasjar, you should see the charging led of the Jasjar (in UR case O2 EXEC) turn on Ambar it will take about 5 seconds.
Hope this helps
I swapped the curly cable from my Brodit Active cradle for a regular USB cable with a cigarette light/USB adapter, but it didn't work at first. For some reason pin 4 (which isn't normally wired up in a 4pin to 5 pin plug) had to be connected to pin 5. That might be the problem you are suffering from with the non-Exec/HTC cables.
Cheers,
Steve.
o2 car charger
just seen an o2 car charger in the o2 shop today price 14.99
Ive just ordered a hollux slim gps, a mount/cradle from dsldevelopments and a cigerette lighter to 2x usb port adapter from ebay. Only just ordered, waiting for everythign to come at the moment. The adapter is just a cigerette lighter with 2x full size usb ports on back of it, rated at 5v/7.2A, im assuming I can use the supplied usb cable that come with the exec and plug it into this to charge? (along with the gps at same time).
pyrom said:
Ive just ordered a hollux slim gps, a mount/cradle from dsldevelopments and a cigerette lighter to 2x usb port adapter from ebay. Only just ordered, waiting for everythign to come at the moment. The adapter is just a cigerette lighter with 2x full size usb ports on back of it, rated at 5v/7.2A, im assuming I can use the supplied usb cable that come with the exec and plug it into this to charge? (along with the gps at same time).
Click to expand...
Click to collapse
No, that's the point I was making - that configuration didn't work for me (or my colleague). The standard USB cable that has a USB A at one end and the USB B Mini at the other doesn't have pin 4 wired up in the Mini B, and so doesn't charge the Exec. I had to splice open my moulded plug, and put some solder on pins 4 and 5 to make it work.
Cheers,
Steve.
thx, i was vague (i hope ) by supplied cable, I mean the orginal exec-usb cable that came with the exec, not a generic one. The connectors on the cigerette lighter are full size usb A sockets, not plugs.
StevePritchard said:
...The standard USB cable that has a USB A at one end and the USB B Mini at the other doesn't have pin 4 wired up in the Mini B, and so doesn't charge the Exec. I had to splice open my moulded plug, and put some solder on pins 4 and 5 to make it work.
Click to expand...
Click to collapse
This is weird: I'm charging my Exec using a USB cable that came with my Canon camera and I keep the original Exec cable in my laptop bag for emergencies.
The Canon cable works fine and charges my Exec no probs. Wonder why. Maybe digicam cables also have the pin arrangement you describe?
I have now emailed the prick i bought the car charger from 5 times (ebay) and he is still ignoring me. Do you guys think i should post his email address on here so the UNIVERSAL community can have a go at the twat, or do you think i should cut my losses and move on. After all it is only £5.49 ive lost, but its the first time ive had this trouble from an ebay seller and its winding me up. WHY WONT HE RETURN MY EMAILS?
Leave a neg feedback and open a dispute case would be my advice.
try a guy on ebay 'solwareltd'
i have bought 3 cradles from him Arkon type with car charging systems built in and they worked a treat. Xda2s and Xda2i were perfect as windscreen mounted aswell as charging.
the Exec version i have to mount upside down as the mini USB is obxtruced by the side clamps but with 'rotate screen' option in TomTom this proved not to be a major problem at all.
Trustworthy and reliable i have found this guy to be and i recommend him to anyone whos after the car options for HTC devices.
thanks
SiliconS said:
StevePritchard said:
...The standard USB cable that has a USB A at one end and the USB B Mini at the other doesn't have pin 4 wired up in the Mini B, and so doesn't charge the Exec. I had to splice open my moulded plug, and put some solder on pins 4 and 5 to make it work.
Click to expand...
Click to collapse
This is weird: I'm charging my Exec using a USB cable that came with my Canon camera and I keep the original Exec cable in my laptop bag for emergencies.
The Canon cable works fine and charges my Exec no probs. Wonder why. Maybe digicam cables also have the pin arrangement you describe?
Click to expand...
Click to collapse
The interesting thing is that regular USB cables work if plugged into a PC, it's just when they are plugged into these cigarette lighter adapter devices. My setup in the car actually has one of those with a two port USB hub plugged into it, and that required the mod I mentioned.
Cheers,
Steve.
Ebay seller has just emailed me (after 4 days and six emails to him) and admits he sent the wrong charger. He says he will send me a charger for C500 which he says will do the EXEC. I hope hes right for his sake!!
Cannot charge xda executive with car charger ,when connected nothing happens light does not go red and also the connection icon does not show
make sure you dont have a faulty charger... dont know what you are using but i believe most people use the cigarette lighter to usb converter and then just use the usb cable... also have you tried pressing the on and off swith with the charger plugged in ?
BR
car charger
Hi and thanks for the fast reply mate <yes it is a new charger from o2 .
No i have not tried the on off with the switch ,but would i still be able to charge when i am using tomtom
Whell....I use the cigarette lighter to usb adapter and usb cable ...at times i have had to quik press the on/off swith and at times plug and unplug the cable to get it to charge ....I used this as a "jump start" method only and no problems after that with using it whillst on charge (even with tomtom)..... other than that you may have a faulty charger or fag lighter to usb adapter (I never seen what a o2 one looks like).
BR
Is the charger one especially for the exec?
I found normal usb chargers for phones like V3 or a GPS charger cant supply enough current to charge an exec.
hi, yeah i have had this problem, and so have a few of my clients, seems that not enough juice flows through the non branded versions, unlike from o2's or Brodits cables
I found that a regular USB cable into a Cigarette Lighter -> USB Socket didn't work until I joined pin 4 to pin 5 on the USB B Mini plug. All of the adapters I had that worked, but only powered (no data, i.e. Brodit and mains adapter) seemed to have pin 4 joined to pin 5 (pin 4 isn't normally connected at all). Once I did that mod it worked fine.
Cheers,
Steve.
bluesign2k said:
Is the charger one especially for the exec?
I found normal usb chargers for phones like V3 or a GPS charger cant supply enough current to charge an exec.
Click to expand...
Click to collapse
Orange shops carry a charger intended for HTC manufactured devices (i.e. the SPV C500/M500 range) which works fine. Only £9.99.
I am in the UK and looking for a two pin euro charger for my phone - if it is packaged with a 12v charger or any other kit i dont really mind, as I could do with an extra car one.
Alternately - I have a 'plug' for a UK socket that instead of having a cable on it has a socket like a car charger at the back, so I can use it with a car charger for any new mobile I get so I have a second mains charger - is there a euro-two pin plg equivalent of this?
Cheers
Any USB charger (there are many varieties) should work fine, so you just have to find a Euro-plugged USB charger then stick the USB cable into the charger.
For example, I have the iPod USB charger with swappable front plugs, which charge my Wizard, Sony Ericsson phone and the iPod.
Exactly, but it is finding a two pin one that is the problem.
Try Expansys. They usually have a wide variety of weird and random plug combinations so you might be lucky there.
alternatively - a bit uglier - get a travel plug converter (just the plug converter, not the big transformers). The charger that came in the box is rated for 100V-240V and ~50Hz-~60Hz - so it'll work in EU, USA, UK, JP - as long as I bring the plug converter so that it'll physically fit
Here.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=5818157604&rd=1&sspagename=STRK:MEWA:IT&rd=1
£5.99 plus postage. Uses the standard usb cable that came with the device.
I've bought a few things from them - good quality.
pewe said:
Here.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=5818157604&rd=1&sspagename=STRK:MEWA:IT&rd=1
£5.99 plus postage. Uses the standard usb cable that came with the device.
I've bought a few things from them - good quality.
Click to expand...
Click to collapse
By default, the standard USB sync cable will not charge from a cigarette lighter / mains adaptor USB socket, it will only charge via a computer.
If you want to modify the cable so it will charge from a cigarette lighter etc, you need to short pins 4 and 5 of the mini USB end. Do a google search for a diagram etc. Once modified the cable will no longer work as a sync cable.
Richard
By default, the standard USB sync cable will not charge from a cigarette lighter / mains adaptor USB socket
Click to expand...
Click to collapse
I am puzzled. I understand what you are saying about the connections, but what puzzles me is I have a GPS receiver that I bought which came with a flexible USB charger and had a cigarette adapter and mains adapter (both US and UK) in the box.
I bought a cradle for my Vario (complete with usb sync cable) so don't need the the usb sync cable supplied with the Vario in the office. So I use it in the car with the USB Cigarette adapter that came with the GPS unit and it charges the Vario in the car with no problem.
I haven't tried it with the USB mains adapter yet, but having seen the above reply will try it tomorrow, but I'm sure it will work because its the cable that should prevent it.
fluffcat1 said:
By default, the standard USB sync cable will not charge from a cigarette lighter / mains adaptor USB socket, it will only charge via a computer.
If you want to modify the cable so it will charge from a cigarette lighter etc, you need to short pins 4 and 5 of the mini USB end. Do a google search for a diagram etc. Once modified the cable will no longer work as a sync cable.
Richard
Click to expand...
Click to collapse
I beg to differ. My shiny white Apple iPod USB charger works perfectly as a charger for the Wizard, with the USB cable provided with the phone.
I'm aware that some phones including the Razr and Blackberry are sometimes reported to be picky about the USB chargers, but so far Wizard has no such curiosities.
ZeBoxx said:
alternatively - a bit uglier - get a travel plug converter (just the plug converter, not the big transformers). The charger that came in the box is rated for 100V-240V and ~50Hz-~60Hz - so it'll work in EU, USA, UK, JP - as long as I bring the plug converter so that it'll physically fit
Click to expand...
Click to collapse
Not really viable - as often when abroad i just take a rucksack and see where i end up - so ideally everything is light and preferably a cable that is permanently attached to the plug.
Incidentally - there is a company in italy called Wind doing a PAYG sim that offers a gig of data in Italy for 20 euros - so not much use to most here - but if you use it for roaming in europe - they drop it to 20% of that - so 204.8 meg for 20 euros per month - Tmobile charges 1500 and orange 2 grand for the same!
So I visited my local Walmart and discovered a car charger, designed for Blackberry 6200 through 7500 and Motorola RAZR series phones.
The connector is the same, mini USB B.
$25,000 Question: Can I use this to charge my TMO MDA? Same connection, just worried the voltage or wiring might not be the same.
The AC chargers that came with my Razr and MDA are the same voltage-wise (5V) but not the same Amps.
MDA is 5V 1A, Razr is 5V 0.5A, they are not the same
However, it shouldn't damage the battery, just charge slower.
Just so you know, USB ports output 5V at 0.5A as well.
Edit: Sorry, I realize I completely changed my post, but didn't want incorrect info out there.
Thanks...I figured that, but was just making sure.
I got it in case of emergency...I almost always charge via USB; just leave it plugged in all day.
But you never know.....
Thanks!
fuzzie said:
Thanks...I figured that, but was just making sure.
I got it in case of emergency...I almost always charge via USB; just leave it plugged in all day.
But you never know.....
Thanks!
Click to expand...
Click to collapse
Don't expect it to charge if you battery is below 30-20% charge. I'm not sure why this is an issue but it has bitten me in the rear once already.
Does anybody know why it's a problem for "less-than-1amp" chargers to charge back from the low threshold?
boxwave.com sells a 1 amp car charger. It has a USB port, so you just use it with any cable that normally plugs into a USB port. Since my Globalsat GBH-820 BT adapter came with a cable with large USB at one end, and _two_ mini USB at the other end, I can charge the GBH-820 and my 8125 at the same time.
oconnor.jb said:
boxwave.com sells a 1 amp car charger. It has a USB port, so you just use it with any cable that normally plugs into a USB port. Since my Globalsat GBH-820 BT adapter came with a cable with large USB at one end, and _two_ mini USB at the other end, I can charge the GBH-820 and my 8125 at the same time.
Click to expand...
Click to collapse
That's not true,... if you use the VersaCharger like I do. This is where I learned of the "charging only" cable that Boxwave sells (how conveinent) and then they sell a Sync/charger for USB only. I have a Boxwave VersaCharger that I can't use without buying their "cable" to make it charge the 8125. I found this out because I have a Belkin retractable sync/charge cable that doesn't work with the VersaCharger as I had hoped. The cable that you have may work with 1amp charger but it probably won't work with theVersaCharger.
What is the output on the "min-usb" connector end of the cable? This sounds like the cable that I need for the 2 devices that I use.
...I wonder if they are putting some electronics in the cable connector...?
I bought the bundle that had a car charger (I have the regular; not the high output; not the Versa) and two mini-Sync (retractable) cables. I got caught by the fact that one of them is "charging only" when I was trying to use the "charging only" cable between my laptop and my TI-84plus calculator. I switched to the mini-USB cable that came with my calculator, and it worked fine, as did my phone with AS. That's when I looked closer at the two mini-sync cables and noticed that one was for "charging only". So, that mini-sync cable (the charging only) stays in the car, and works fine for charging my phone or my GBH-820. The really odd thing is that the "charging only" cable looks "thicker" than the one that works for syncing. Maybe lower gauge wire to help the higher current flow easier.
I have also used my other USB-miniUSB cables with my car adapter. E.g. the cable that came with the phone, the cable that came with my TI-84plus calculator.
My Bluetake headphones came with their own USB cable that has, for lack of any better term, an ultraminiUSB (or some kind of proprietary connector, cause it's not marked with a USB symbol like the other cables) plug at the end. I just plug the regular USB end of that cable into the car charger, and it charges the Bluetake's just fine.
Excellent car charger for Wizard
I have purchased and used the "Ecovell 4x USB" adapter on both a Wizard and a Universal. It provides a 2 Amp output which is equivalent to the AC adapter and works with any mini-USB cable. It will charge a Universal from absolutely dead which I have not been able to do with any other adapter. Here is the link to the item on Yes Depot:
http://www.yesdepot.com/product/ud0520.html
I've ordered from them and the service was OK. I haven't seen the item available anywhere else.
Regards,
Dave
In my desperation to find a car mount that connects straight into the cigarette lighter so that I don't have to screw/stick one on to the dash, I have been thinking about getting one that's meant for another kind of PDA that hopefully has the same connector as the TyTN.
On Gomadic's site on this page: http://www.gomadic.com/car-auto-mounts-cat.html
they list the HTC: Blue Angel, Falcon, Harrier, Himalaya, Wallaby, Prophet, Apache, Magician, Prodigy, Wizard & Galaxy.
Is anyone sure about whether any of those have the same USB connection as the TyTN? The company makes fantastic mounts which is why I want to get another one from them to replace the one I used for my XDA II.
the power adaptor from the Wizard will work with the TyTN.
Thanks!
I checked this out using pictures from the net and saw it was the same! So I've ordered a suitable holder from Gomadic.
Standard mini-usb, but with an optional extension for their pain in the a$$ audio output/headset. But any mini-usb is fine for power.
V
vijay555 said:
Standard mini-usb, but with an optional extension for their pain in the a$$ audio output/headset. But any mini-usb is fine for power.
V
Click to expand...
Click to collapse
Actually, not completely true!
While any mini-USB cable should be fine for ActiveSync/desktop charging, not all DC mini-USB chargers are alike! There is definitely a specific voltage/wiring configuration requirement required for DC charging the TyTN.
Make sure you pick a charger that is compatible with the Wizard or the Universal, and you'll be fine... Others may or may not work!
The mini-usb for charging has extra pins connected to start charging.
Simplest method is to buy a charger that has a normal USB output (anything from 300mA up will do) best to buy a travel one that has interchangable UK/Europe/US mains heads and a 12/24V cigarette lighter adapter.
Chop the cable off your TyTn mains charger close to the power head and fit a standard USB connector to the cable.
Voila! you have a mains/mobile charger that DEFINITLY works mobile...