Related
go to hklm\software\oem\voicecommand and set the value of "launchapenable" from 1 to 0
when activating voicedial from your headset (press connect button at the headset 2 sec.) it diverts all audio to the bluetooth.
works also with musik.
pressing the button again it disconnects the bluetooth and the main speakers are active again.
in this case the original voice dial does not work anymore until you change the value back to 1.
for me a good solution because i don't use voice dial and prefer insted skype and headset.
Very good tip...will try that!
Cheers...!
Works on QTEK S100 with Jabra Bt 250 Headsets?
Do you happen to know if the BT specification of the EXEC allows it to transmit stereo audio? Say from a mediaplayer to a BT car kit?
If so, that would send me over the edge and Id have to buy a BT carkit!
...ohh, on 2nd thoughts, it would also depend on the bandwidth too. Anyone know what sort of frequency range BT stereo may be limited to?
for stereo output is another reg.hack needed i think. because pushing the voicedial button at the handset it activates the bluetooth headset profile for listening to the voice but voicedial doesnt start. so you can use it for normal micro and loudspeaker.
maybe anybody knows how to activate in this case the "high quality audio profile" by editing the registry instead of "headset profile"?
Great job, The sound (in music) is good ? i tested this but the sound wasnt good.... I think my headset isnt good for music.
yes it depends on the bluetooth profile. for good quality "high quality audio" (A2DP) profile is needed.
blueangel
would this work on a blueangel running WM5?
gazela00 said:
Works on QTEK S100 with Jabra Bt 250 Headsets?
Click to expand...
Click to collapse
How did u do it....I mean yours is not a WM 5 OS...Pls advice
hdubli said:
gazela00 said:
Works on QTEK S100 with Jabra Bt 250 Headsets?
Click to expand...
Click to collapse
How did u do it....I mean yours is not a WM 5 OS...Pls advice
Click to expand...
Click to collapse
No it does not work in QTEK s100....
Works -but not great
very tinny muffled sound on my moto HT 820, was hoping it would work as well as the bluetooth stack update for the magician.
Sound does come out in both ears on my stereo phones. but I dont desire to listern to the tinny sound.
Still great find and discovery. Just hope someone can progress it to A2DP asap.
sorry, but can anybody tell me how to edit the registry in WM5? I never did it before. What tool do you guys use? Is it something free?
Thanks.
I used PHMREGedit
Here's the link:
http://www.freewareppc.com/utilities/phmregistryeditor.shtml
andyes....it's free.
Tried it with my BT200
I know the registry works....but cannot get it to play on the headset.
It works...becos upon pressing the phone button on the head set for 2 sec, the audio comes from the handset. On redoing it again, the audio goes off from the handset.
Mine is working fine. I really like the way its now.
Thanks a lot.
Ooops....
my Bt200 wasn't working. That's why there was no audio coming from it.
Need to figure out why there is no audio coming from the headset.
Sigh another problem!
So basically, the registry works.
Im using Total Voice COmmander and it works with WMP.. No need to install another software to play music thru BT.
I just press my Jabra headset twice and it goes "Say Command".. then I say "Play a music"..
Sometimes it's stubborn and Calls someone or Says "Today you have no Appointment" but I guess with a lot of practice, my Dopod understood what Im saying and played me a song.. Now, Im having trouble with my Dopod catching the title of the song i want it to play. I've placed voice tags on the songs and 50% of the time, my dopod got it right.. got to work on the other 50% though..
I just cannot believe my ears. I have used my Qtek S200 with a SonyEricsson stereo BT headset for months with great results (some occasional drops but very seldom). Today I bought a P3600, paired the headset and guess what? A2DP output is not stereo. I couldn't be more upset!
anonimo said:
I just cannot believe my ears. I have used my Qtek S200 with a SonyEricsson stereo BT headset for months with great results (some occasional drops but very seldom). Today I bought a P3600, paired the headset and guess what? A2DP output is not stereo. I couldn't be more upset!
Click to expand...
Click to collapse
oh... and my device have this BUG too
no point to be upset.
A2DP output set to jointstereo by default. set use jointstereo to "0" in registry to get rid of this "BUG"
SecureGSM said:
no point to be upset.
A2DP output set to jointstereo by default. set use jointstereo to "0" in registry to get rid of this "BUG"
Click to expand...
Click to collapse
Done! I love you! How can they be so stupid to set the default for a stereo profile to mono??????
SecureGSM said:
no point to be upset.
A2DP output set to jointstereo by default. set use jointstereo to "0" in registry to get rid of this "BUG"
Click to expand...
Click to collapse
GOOOOD MAN!
I create A2DP stereo activator - Download
anonimo said:
I just cannot believe my ears. I have used my Qtek S200 with a SonyEricsson stereo BT headset for months with great results (some occasional drops but very seldom). Today I bought a P3600, paired the headset and guess what? A2DP output is not stereo. I couldn't be more upset!
Click to expand...
Click to collapse
@anonimo
Hi, do you have any problems with SonyEricsson BT stereo headset? I mean, if you listen to music with player and there is coming a phone call. Does it change from music to phone and automaticaly back to phone?
I have bought a new SE hbh-ds970 and have a few problems with that point. Mostly I have (to listen to music again) to warmstart my P3600.
Any ideas?
webfrog said:
@anonimo
Hi, do you have any problems with SonyEricsson BT stereo headset? I mean, if you listen to music with player and there is coming a phone call. Does it change from music to phone and automaticaly back to phone?
I have bought a new SE hbh-ds970 and have a few problems with that point. Mostly I have (to listen to music again) to warmstart my P3600.
Any ideas?
Click to expand...
Click to collapse
I have it and no problem with windows media.
webfrog said:
@anonimo
Hi, do you have any problems with SonyEricsson BT stereo headset? I mean, if you listen to music with player and there is coming a phone call. Does it change from music to phone and automaticaly back to phone?
I have bought a new SE hbh-ds970 and have a few problems with that point. Mostly I have (to listen to music again) to warmstart my P3600.
Any ideas?
Click to expand...
Click to collapse
I haven't tried yet with the P3600 but answering calls and resuming music used to work with the Qtek S200 and the SE HBH-DS970. I will try and let you know.
One thing I found with my old setup was that when resuming music sometimes the headset volume would be set to 0 and I had to turn up the volume.
----------
PS: I have tried a couple of times now and it seems to be working. It takes a few seconds for the music to resume but it does. I think the trick is to end the call using the headset button, not the phone button.
not only in 3600!!
It looks to be a Mobile 5 feature. I found same reg key in same state pn Eten Glofiish X500. after applying change, x500 also started stereo. I am using SE stereo BT headset and it works for stereo..
May be this is disabled because it may result in bad quality on mono headsets..
AS
anonimo said:
I haven't tried yet with the P3600 but answering calls and resuming music used to work with the Qtek S200 and the SE HBH-DS970. I will try and let you know.
One thing I found with my old setup was that when resuming music sometimes the headset volume would be set to 0 and I had to turn up the volume.
----------
PS: I have tried a couple of times now and it seems to be working. It takes a few seconds for the music to resume but it does. I think the trick is to end the call using the headset button, not the phone button.
Click to expand...
Click to collapse
ok, thanky you - I will have a try again ... we will see. Did you managed with the in build pocket player?
Yes I am using the inbuilt windows media player.
I've been checkin' some things in the registry too... and i've found that "Quality" is set to '30'. Somewhere on the Hermes wiki (i think), i've read that this is only medium quality. I saw this list with diffent quality-grades, with '48' mentioned for the 'good' quality.
Does anyone know if it can harm either the headset (Jabra 620s) or the Trinity, or can i safely set it to a higher quality level ?
I stand to be corrected, but the figure of 48 seems be referring to the 'bits-per-second' of an audio stream. Based on this assumption I do not think that any damage could be done.
Hi,
I search for joinstereo in registry but no result. Would you pls post the full path in registry?
Another problem I find with my iclip, I can listen to music. But when I use phone book to dial, it just give a continuous tone. If I dial by numnbers, it works. Any similiar problem for other BT stero headset.
My mono headset has no such problem.
Trinity with iTech clip/touch/SonyE
leon100 said:
I stand to be corrected, but the figure of 48 seems be referring to the 'bits-per-second' of an audio stream. Based on this assumption I do not think that any damage could be done.
Click to expand...
Click to collapse
That's correct, should have mentioned it clearer...
It's from the key "BitPool", which is set to 30. But there's also a key called "MaxSupportedBitPool" that's also set to 30.
My actual question would be; can it do any harm if a change the "MaxSupportedBitPool"-key into 48 as well ? Cause that might just be hardware related...
mobiler2 said:
Hi,
I search for joinstereo in registry but no result. Would you pls post the full path in registry?
Click to expand...
Click to collapse
It's: HKLM\SOFTWARE\Microsoft\Bluetooth\A2DP\Settings\
Here you'll find the key "UseJointStereo"; set it to 0.
Moaske said:
That's correct, should have mentioned it clearer...
It's from the key "BitPool", which is set to 30. But there's also a key called "MaxSupportedBitPool" that's also set to 30.
My actual question would be; can it do any harm if a change the "MaxSupportedBitPool"-key into 48 as well ? Cause that might just be hardware related...
Click to expand...
Click to collapse
Cannot really say if any damage will be done, but then what damage can be done? You could take a full backup of the device and try changing the two registry settings you mentioned. At the most perhaps no sound will be heard, in which case you can restore the device from the backup taken.
Moaske said:
It's: HKLM\SOFTWARE\Microsoft\Bluetooth\A2DP\Settings\
Here you'll find the key "UseJointStereo"; set it to 0.
Click to expand...
Click to collapse
Got it. Thanks.
Does Wing work with Stereo Bluetooth Headset _ONLY_? One bluetooth headset I have works with Dell X51v, but has no luck with the Wing. Seems Wing requires A2DP(??).
Any ideas?
gbzbz said:
Does Wing work with Stereo Bluetooth Headset _ONLY_? One bluetooth headset I have works with Dell X51v, but has no luck with the Wing. Seems Wing requires A2DP(??).
Any ideas?
Click to expand...
Click to collapse
No, stereo is not required. I have two very cheap bluetooth headsets that both work with my Wing. The wing doesn't require A2DP, but does support it (supposedly).
On that note, is your headset visible in the Wing when you go and search for bluetooth devices (add new) in the bluetooth applet?
The headset works fine with X51v PDA so I know it is functional.
Yes, the headset is visible in the Wing's BT management interface. It can pair the partnership without any problem, when I tried to connect, sometimes I saw the microphone icon appear in the top bar of the screen, but it disappeared in seconds.
When I adjusted the volume, sometimes I heard clicks from the headset, but when I played music/sound, they always came out from the speaker.
What am I missing here? Thanks!!
psyop1 said:
No, stereo is not required. I have two very cheap bluetooth headsets that both work with my Wing. The wing doesn't require A2DP, but does support it (supposedly).
On that note, is your headset visible in the Wing when you go and search for bluetooth devices (add new) in the bluetooth applet?
Click to expand...
Click to collapse
update:
I got the bluetooth headset to work in the phone mode. but not with mp3/movie.
everything from the mp3 players (pocket music and media player) still come out of Wing's speaker...
gbzbz said:
The headset works fine with X51v PDA so I know it is functional.
Yes, the headset is visible in the Wing's BT management interface. It can pair the partnership without any problem, when I tried to connect, sometimes I saw the microphone icon appear in the top bar of the screen, but it disappeared in seconds.
When I adjusted the volume, sometimes I heard clicks from the headset, but when I played music/sound, they always came out from the speaker.
What am I missing here? Thanks!!
Click to expand...
Click to collapse
any solution for listenning to music!?!?!?!?
bt audio is a cab where the music will play on bluetooth
my headset is not stereo, and after i tried bt audio nothing happened.
Am I doing something wrong?
Please help!
Thanks!
Also havng trouble rerouting calls to headset...
Any advise???
I've spent days searching and trying all sorts of tweaks but I can't get anything to work. Can anyone PLEASE help!
I use Tomtom 7 and I've always sent the voice instructions to the bluetooth speaker in my bike helmet (just a handsfree paired item). I've previously done this on HTC devices with BTAudio and a one line registry tweak. Can anyone offer a solution to send all the audio to a bluetooth handsfree on the HD2?
I really hope someone can help, I've got the HD2 setup just right except for this last remaining item.
Many thanks,
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
xardus said:
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
Click to expand...
Click to collapse
Yes I've tried the "manage system audio in handsfree device" option. I can get some background noise on the headsets (I'm trying with a Scala Rider and Motorola 700 & 850) but I never manage to get any sound.
Can anyone please offer a solution? It's a big disappointment for me if this isn't possible. Any suggestions welcome, many thanks.
My Observations
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Fadetogrey said:
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Click to expand...
Click to collapse
It gives me some hope that you've got it to work with one bluetooth device. Can you please let me know exactly what you did to get the $20 bluetooth earpiece to work?
Thanks,
yeah that was my idea but without a stereo bt device i cant try to myself...i ordered to vodafone one with some of my tons of points...3 weeks and no answer!
I had the same issue and on my old phone, the HTC Touch HD, I used the following program to my satisfaction:
BTAudio
On my HTC HD2 however this doesn't seem to work anymore. :-(
it does the same thing of the inbuild bt option on hd2 its just a "quick link" to place on the bar
anyone of u have any problem with bt device volume? before i have an Artemis and 3 different device i used the device volume was every time the one i choose...now every time a new call starts phone volume its right but device volume jump to minimum level and every time i have to press + button like as i'm playing videopoker to dont miss fist seconds of a conversation
Works fine with Jabra 3030, all audio over it, music, system sounds and calls.
Maybe it's only working for bluetooth devices that are setup as stereo. Can anyone please offer a solution here?
I've installed a 6.5 rom (dutty v7 - thank you) on my HD and after a sprite restore (level 2) bluetooth audio divert works fine. Although I notived that the bluetooth options remained the old settings (possibly due to my backup restore) and the divert was done using the BTAudio. Sorry to keep asking but if anyone can shed light on this.
Is it possible to tweak the HD2 so that audio can be sent to any bluetooth headset/handsfree or is there some hardware limitation that stops this from being done?
I've tried every app and tweak that I can think of! Please can anyone help, even iof it's to let me know why this can't be done.
Thanks,
its what we all are trying to do......now i think its only a bt device problem...if it support bt2.1 and a2dp with edr seems to work all good....
i solved in car with headphone in the box...but bluetooth should be much and much better without any cable that always have to remove nodes (its the right word? sorry if not hehe)
I'm connecting to my HD2 using Jabra Stone, an A2DP headset. When I selected the stereo headset profile on the HD2, it redirected all system sounds to the headset: reminders, SMS alert, soundtrack for videos, audio player....except phone ring. I used BT Audio over a non-A2DP headset before with Diamond2, but the ausio is very poor, and the connection drops very often. Since I changed to A2DP headsets, the Diamond2 and HD2 supports it out of the box - no hack needed.
So look for A2DP headsets if you want to redirect audio.
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
I have an LG HBM-220 bluetooth and cannot put audio to in, only phone calls!
How can i manage to do it?
I blame it on the stupid Widcomm Bluetooth stack... If the HD2 used the better MS stack, BT would play nice with with more of our periphirals and apps
I can't use MSVC properly with BT either....
the solution is to go to the bluetooth settings, select your device and connect the stereo audio connection.
Way back, Microsoft decreed that ONLY the phone app could use a mono BlueTooth headset, although any audio could be redirected to a stereo A2DP headset.
In order to get around this you need to fudge the sytem with something like BTAudio or TekSoft's BlueAudio.
The latter worked on my XDA Orbits (1 and 2) but does not work on my Touch HD with Dutty's R6 ROM (WM 6.5) possibly because BlueAudio requires the Microsoft BlueTooth stack and I suspect Dutty's ROM has the Widcomm stack. But I could be wrong about that.
BTAudio sort of works on my Touch HD, but outgoing audio is speeded up like I've been breathing Helium.
So no current solution to yet another idiotic gotcha from Microsoft.
Noony said:
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
Click to expand...
Click to collapse
Hmmm. When I conect via gprs to youtube aps I can hear the voice in my mono headset (jabra 2020) but via wifi and computer as modem voice is only in phone speaker. So maybe we should look gprs or youtube aps reg tweek.
Guys
i have a nokia HB-100 headset and i'm experiencing all kinds of strange behavours
sometimes system sounds including music ...etc get directed to the headset and some other time it just directs calls no matter how hard i try thru soft resets or unchecking then checking the "play system sounds ..." option!
very strange, any insights about this? is there a tweak to go with or is it a known WM defect?
I have been reading many threads on getting the "stereo audio" connection to auto connect fot BT Stereo headsets. It seems that when you pair it the first time, both "Hands Free" and "Stereo Audio" are working. When you disconect your headset and reconnect it again, only "Hands Free" connects.
I have tried A2DP toggle and A2DPSwitch, but they dont seem to work on the HD2. A2DP toggle did work when I had my old Samsung Omnia i900, so I can assume that its something to do with the HTC Phone Bluetooth stack
Each time I want to use the BT Stereo headset, I need to go to settings/menu/all settings/Bluetooth/590Plantronics and expand + and select "Stereo Audio". They then connect.
What I would like to do is until there is a fix for this, to reduce the number of taps, is create a shortcut to the Bluetooth Control Panel that shows the 590Plantronics device.
Is this possible?
Thanks Chris
Just make a shortcut to Windows\BTManager.exe and add it as a quicklink.
hi,
i have a jabra 3030 and a motorola s705 and both are reconnecting (handsfree and stereo audio) properly, when i turn them of and on again. when i go out of range (eg. forgot the mobile in teh car), when i come back the handsfree connects direct, and the setereo audio after i press the play button once. maybe this works for you also.
regards mad
I installed AutoA2DP on my phone and ever since, whenever I turn on my headset, it always connects as both stereo bluetooth and headset. I haven't tried it on an HD2 but you should definitely try it out.
I found the .cab of AutoA2DP awhile ago but forgot where I found the download link. In any case, I have attached it for your convenience.
D.W
Hi kilrah, thanks for your advice! That cuts out a few blinkin clix now and will do as a work around till this fiasco is solved, lol
I also noticed something very bizzare, and it is confirming my suspicions that HTC is in cahootz with MS or Widcomm or both, lol.
I tried using auto a2dp as suggested by GurWu, leaving the a2dp.ini file as wmplayer.exe. I then deleted the Plantronics from the system, re-paired them and what should spring to life after turning on the cans? You guessed it..WMP all paired up with HF and Stereo Audio. Turned off the headsets, turned them back on again and sure enough, WMP launches and plays thru the headsets.
All good, except I wont use WMP as it STILL doesnt have an EQ (Not getting in to why one needs an EQ or not here, lol)
No problems, I thought, Ill just set the a2dp.ini to pocketplayer.exe (my preferred player) turned on the headsets and.......nothing....no pocket player came to life.
Doing a manual launch of PP revealed that the headsets were only paired as HF, so back to my original problem.
Renamed a2dp.ini back to wmplayer.exe and it all works as it should....mmmmmm...does this wreak of a MS/HTC/Widcomm ploy? LoL
PS @ mad: When you said press the play button, were you referring to the play button on the software of your chosen media player or a hardware button as I dont have a play button on my HD2
PPS: Got a reply bacl from a2dp toggle author, says that it only supports M$ BT stack :-(
Cheers Chris