cant set Phone Pad as default input method - 8525, TyTN, MDA Vario II, JasJam General

I tried to set the Phone Pad as the default input method by following the instructions here:
http://wiki.xda-developers.com/index.php?pagename=WM5_Tweaks_Other
Set default SIP
The default SIP on practically every device is the Keyboard. You may prefer entry with a different SIP. If so, you can set this to be the default SIP through:
HKCU\ControlPanel\SIP\DefaultIM = |SIP ClassID|
The |SIP ClassID| will depend on the SIP's ClassID, which may vary per-device. You can find the correct ClassID by searching for "IsSIPInputMethod" in HKCR, then going to the top key and checking the name of the SIP that's in the (Default) value.
Please note that this doesn't work with all SIPs. Transcriber/Calligrapher are two examples of this.
You can, however, set Transcriber as the default SIP by starting Transcriber.exe on startup. (This should be moved to, or added to, non-registry Tweaks page)
WARNING: Do not assume that the below ClassIDs would be -as found- on your device! Setting it to a non-existant SIP may prevent your device from booting up!
Howevere, when I did a soft reset, the screen turned white which means that the settings did not work and I hard to hard reset. Is there any other way to get Phone Pad to be the default SIP.

Have you tried Sipchange?
http://forum.xda-developers.com/viewtopic.php?t=56053&highlight=sipchange

search the registry for "Phone Pad" to find the classID to make sure what you put in is correct. the wiki just assumes what the class id is from previous wm5 phones.

i realised that sometimes i am unable to select Phone Pad. any of you facing the same problem too?

vapor said:
i realised that sometimes i am unable to select Phone Pad. any of you facing the same problem too?
Click to expand...
Click to collapse
I've got the same problem!!! It seems that sometimes if I select Phone Pad It doesn't work right and the system shows the default keyb.
How can I fix it?

El_Mar1ach1 said:
vapor said:
i realised that sometimes i am unable to select Phone Pad. any of you facing the same problem too?
Click to expand...
Click to collapse
I've got the same problem!!! It seems that sometimes if I select Phone Pad It doesn't work right and the system shows the default keyb.
How can I fix it?
Click to expand...
Click to collapse
So far, I have yet to find a solution. But if I do, I'll be sure to let you know.

alright it works now:
use this program if you have yet to do so:
http://forum.xda-developers.com/viewtopic.php?t=56053&highlight=sipchange
and follow the instructions there, including using the " when it calls for.
now i have phonepad set as default all the way

Dear all, sorry to hijack but can someone enlighten me to how I can get the phonepad SIP into the 838Pro? I tried installing PhonePad_Magician_Generic_WWE_RC12.CAB and PhonePad_WM5_StrongARM.cab but it does not work after a soft reset.
Can someone advise me which cab file I shld use?

uncaloke said:
Can someone advise me which cab file I shld use?
Click to expand...
Click to collapse
ftp://xda:[email protected]/Hermes/Tools_and_Programs/
There are 2 phonepad CABs here, english and international versions.

@vapor:
yeah, I'm working on a version of SIPChange that will set and manage its own startup shortcut as well as allow you to change the default timeout. Getting the startup shortcut correct is one of the biggest headaches with my little app... I haven't had a lot of free cycles to devote to it lately though.

don't edit registry. it will need hard reset.
use program sipchange 1.1 or phoneAlarm
SIP need to set every reboot that bill gate brain.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Related

Phone skin settings in registry

In my Vario i had the ugly T-Mobile skin in the phone app. I've found the registry entry HKEY_LOCAL_MACHINE\Security\Phone\Skin, with the keys for defining whole skin.
If Enable is changed to 0, after the reset is skin ignored and phone looks as the keypad for PIN enter. The bad thing is that smartdialing doesn't work.
So i tried another way. My friend has qtek 9100. In the registry he have no keys for defining skin, cust Enable entry with value 1 and dll path.
So i changed my registry in this way, but it didn't work. Skin entries are back an i can no more change Enable value to 1.
Does anyone know how to remove phone skin with smardialing working?
I have been looking at this - I tried renaming the subkeys (DIALER and PROGRESS) and that mostly de-skinned it (had to soft reset after changing them before it took effect). The smart dialing still worked (enable was still set to 1). The smartdialer graphics were not deskinned though.
However, changing it seemed to conincide with problems I had with my GPRS settings going dodgy, and on changing back GPRS seems fine. That could just be a conincidence though.
I have found that all the skin graphics are in graphices files in the windows directory. Some of them are the ones mentioned in the registry here, and some of them are called indialer_*. These indialer_ graphics are the ones that were not deskinned by renaming the DIALER and PROGRESS keys.
There is also carrierlogo.gif that is used in the background.
I recon that renaming the keys, and getting the indialer_ graphics from a non-skinned ROM should do the trick. But I am not sure if my GPRS problems were related or not.
Not had a chance (or another ROM) to play further though.
I've tried to rename DIALER and PROGRESS keys, but noeffect. After reset, the are back the same.
I know that indialer* is skin for smardialer. Smartdialer is sometimes called interdialer..
Finally, I've made it. Skin is nice blue with working smartdialing.. New know-how about registries.
The Skin!!!
Hey can u post a screen shot of the skin you are using and if possible how to change the ugly T-mobile skin!, i just got my Vario a few days ago and havn't found how to change the skin.
Thanks
It looks exatly like PIN enter screen.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
how have you done this? let us into your secret!
Thanks
Ash
I've desribed that here http://forum.xda-developers.com/viewtopic.php?p=207192

REQ: Dialer which I can use with Fingers?

I am looking for a Dialer for Windows Mobile 5 that lets me dial contacts without the use of a stylus or without having to use the pushbuttons - just the touchscreen.
Basically I am looking for something like this - but in either english or german.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Right below your post
http://forum.xda-developers.com/viewtopic.php?t=35326
Thanks will give it a try!
You should use Smart dialing.It's default in wizard.
What's the difference between Smart Dialer and the one from http://forum.xda-developers.com/viewtopic.php?t=35326
I have a Wizard, but I dont know SmartDialing...screenshot anybody?
AFAIK smartdialing is just an add on to the original phone app that lists contacts that match the nubers you have diald already. It doesent make it any easier to acctually dial the numbers. I dont use smart dialer at all, it was just in my way most of the time. So last time I did a hard reset I then followed with a soft reset at the "your device will be customized in 3 seconds" screen and then installed all the CAB's I did want manually.
Later; Lew
lewcamino said:
AFAIK smartdialing is just an add on to the original phone app that lists contacts that match the nubers you have diald already. It doesent make it any easier to acctually dial the numbers. I dont use smart dialer at all, it was just in my way most of the time. So last time I did a hard reset I then followed with a soft reset at the "your device will be customized in 3 seconds" screen and then installed all the CAB's I did want manually.
Later; Lew
Click to expand...
Click to collapse
I have tried almost all types of smartdialing from default one to third-party software and i strongly recommend you to use the followings:
- Imagine Finger Clix WM5 (English version)
- Inesoft Address Book
They are not free but the biggest advantages of these software are that they both allow seaching contacts with two clicks thanks to wise T9 system and they are super fast with beatiful skin
Give them a try and you would never disappoint, especially inesoft address book (don't forget to accept assigning inesoft to hot key when setup)
molski said:
What's the difference between Smart Dialer and the one from http://forum.xda-developers.com/viewtopic.php?t=35326
I have a Wizard, but I dont know SmartDialing...screenshot anybody?
Click to expand...
Click to collapse
When you use smartdailing, just type in the name from the person you want to call and smartdailer looks it up in your contacts. This works like T9, for example push the numbers 665754 (or less when it allready in your screen) to call Molski. With this tool you don't have to know the whole phonenumber and you don't have to go to your contacts for calling.
I hope it is al little bit clear how Smartdailing works.....and I don't want working with out it any more!!

Is there a basic large PHONE pad available ?

Just wondering if there is a very basic phone pad skin available for the M3100...
Just a single line for the number, maybe 2 if the number is too long so the digits don't get too small...
Large buttons for numbers, no video buttons etc just numbers, no need for the TALK/END sort of stuff as the hardware green/red buttons work fine..
Just looking for something that people with wide fingers can use without a stylus....
If there isn't one, what do I need to do to create one ??
Searched the forum but can't really find anything of use on the subject.
Many thanks Phil
I found that the vista theme on Paulya.com worked wonders for this:
http://www.paulya.com/etenskins.htm
http://www.paulya.com/Projects/Eten_Skins/Vista/Vista_Trans/Vista_Trans_Origin.zip
I am tempted to go back to this dialer as it was so good on my Wizard - just lacks a video button.
Hi, Thanks for that.... Managed to get the skin to work that is included with the eten dialer... I also downloaded the eten_ans etc .zip and put it in the windows dir on the phone after extracting it.. can't seem to find how to enable it (am I thick or something... Don't answer that !!)
The only thing I didn't do was use active sync... I copied the extracted file to my memory card then copied them over from that as the PC I'm at, at the moment doesn't run activesync 4 or higher (horrible win98 se machine..
Any comments much appreciated
Phil
I jast ran the cab file from my storage card and it installed perfectly. I did have diffulculty installing additional skins though.
Hi Phil,
There is a CAB on the FTP here which gives you the phonepad software EXACTLY like in older HTC phones: ftp://xda:[email protected]/Hermes/Tools_and_Programs/Phone Pad - English Only.CAB
I installed it and it's great!
Gavin.
GavinN said:
Hi Phil,
There is a CAB on the FTP here which gives you the phonepad software EXACTLY like in older HTC phones: ftp://xda:[email protected]/Hermes/Tools_and_Programs/Phone Pad - English Only.CAB
I installed it and it's great!
Gavin.
Click to expand...
Click to collapse
Great - Any chance of a screenshot?
Have you guys seen Buzz's Virgy DeepOcean Dialer for WM5 QVGA?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://buzzdev.net/component/option,com_remository/func,fileinfo/id,335/
V
Hi sorry to be thick
ok i downloaded the buzzdev.net qvga dialer
but how does one install it. Do i just run the cab via activesync or run it on the vario2 or what sorry about the stupid questions
also i download the splash screen stuff from there too how do i make that appear instead of the default tmobile one when starting up
thanks
JEREMY
Just stick it onto your device, tap it to load it, install and then when prompted reboot (just hit OK and it'll do it) - the PIN entry screen remains the same, but the main dialer screen changes.
It looks very nice, and I'd use it all the time - except there's no way to use the T9 dialing feature which the regular dialer offers (where you can just type the name of the person you wish to call and it shows all valid entries from the list, so e.g. if I wanted to call my Mum - whose entry is Mum, ironically - I'd type 6-8-6 and then hit Dial). It's quite sad to see that this feature is missing, probably for a good reason as it does cause a fair bit of slowdown on my phone - more than on my old Alpine! - but I still use it all the time and I'm going to have to uninstall the skin because I really neeeeeeeeed that feature. :/
ok if I wanted to get the original tmobile dialer back then all I would have to do is uninstall it then? cool
how would I install the splash screen then?
Jeremy
Vijay55,
I installed it OK, the large buttons are awesome, however I have had the following problems:
1) DTMF (Tones) don't work properley when accessing voice mail etc (UK T-mobile) or any other press x application
2) Jog Dialer not active
3) No Smart dialling
Am I doing anything wrong?
Have had to pull it off becasue of the DTMF problem, I've installed it, removed it, rebooted, changed the options etc, nothing seems to fix it.
Fixed it!!
Though I am now using the Eten dialler with smart dial support and one of Paulya's Dark Blue Glass skins.
Editing the registry and setting the value to 0, then soft reboot and dtmf tones are working.
Setting it to 0 wasn't the obvious choice, and previously I hadn't soft rebooted.
Found the following from dhushy in:
http://forum.xda-developers.com/showthread.php?t=276700
Worked it out. For anyone with a similar problem, use the registry editor to locate the following key:
HKLM,"Drivers\BuiltIn\RIL","EnableDTMFSupport",0x0 0010001,1
Change the value from 1 to a 0 and Bob's yer Uncle (for non-British readers that means everything will be cushty - see Only Fools and Horses for a contextual translation)
Did this and I was able to manipulate my voicemail messages as normal.
Click to expand...
Click to collapse
I am on T-Mobile UK.

OpMon - Script to change operator name

I whipped up a little MortScript package with installer to let you easily set a custom operator name and the interval in which the script will check to make sure your operator name is set. It's a two-part MortScript, opmon is the config GUI and opset is the background process which will run on first load and at system startup to ensure your custom name "sticks".
Installation & Usage
1. Download the zip file below and extract the CAB installer.
2. Run the CAB on your device to install.
3. Launch the config GUI by going to Start -> Programs -> OpMon.
4. Set your name and delay, then exit to apply the changes.
This has only been tested on my Mogul, but there is nothing device specific in the script, so it should work on almost any phone.
As always, suggestions are welcome and I hope you like it!
SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Very neat program works on my XV6700 WM5 AKU 3.5
What did you guys use to customize your Today plug-in? HTC Home Plugin Customizer v0.8b??
Reverts to default
I'm using this on my vario II and no matter what i set my delay to it changes back from custom to default after i've used an app or even change to a different tab on htc home.
Is there a fix?
Johnston411 said:
I'm using this on my vario II and no matter what i set my delay to it changes back from custom to default after i've used an app or even change to a different tab on htc home.
Is there a fix?
Click to expand...
Click to collapse
Don't know why that's happening. Do you have a task manager? If you do could you check to see if opset.exe is running in the background?
It's also possible that your delay is set too high. If something changes your custom name back to default, it will stay like that until the opset program checks at the specified interval.
this thing rocks...WOOT
emunutz said:
Don't know why that's happening. Do you have a task manager? If you do could you check to see if opset.exe is running in the background?
It's also possible that your delay is set too high. If something changes your custom name back to default, it will stay like that until the opset program checks at the specified interval.
Click to expand...
Click to collapse
Love the program.....but.......
I have the delay set to 90 seconds yet it seems to take up to 5 minutes for it to change from default (UMTS 3) to my setting. AS it changes back every time the screen goes to sleep it is a bit of a pain.
Am I doing anything wrong?
Andych said:
Love the program.....but.......
I have the delay set to 90 seconds yet it seems to take up to 5 minutes for it to change from default (UMTS 3) to my setting. AS it changes back every time the screen goes to sleep it is a bit of a pain.
Am I doing anything wrong?
Click to expand...
Click to collapse
Seems I have managed to get it working as it should. Just required a soft reset.
http://img222.imageshack.us/img222/8846/sshot001lg5.png
Very Cool!
AT&T,
Welcome to the new RayT&T Network! Muahahaha...
Very empowering even if only a facade.
Thanks
Thank you Emunutz.Good job !
Tested to Mio A701 and work perfect.
Johnston411 said:
I'm using this on my vario II and no matter what i set my delay to it changes back from custom to default after i've used an app or even change to a different tab on htc home.
Is there a fix?
Click to expand...
Click to collapse
I have got the same problem.
The same problem also occurs when I edit this register file:
HKLM\System\State\Phone\Current Operator Name
Has someone a solution/fix. Thanks in advance!
I reinstalled it to device and that seemed to fix iy for me
Wow
Good work
Hi all,
I'm a total noob that needs a little help.
I'm excited to find and try this file on my new HTC touch.
Can you tell me how I install after I unzip the file?
Thanks in advance, --Ray.
Undo the name change
How does one undo the name change? through registry only?
CEPi said:
How does one undo the name change? through registry only?
Click to expand...
Click to collapse
I haven't tried, but you could always uninstall the program.
Andych said:
I haven't tried, but you could always uninstall the program.
Click to expand...
Click to collapse
Which is..some kind a problem for me. I've been trying to uninstall OpMon, but had some funny problems. The lowdown:
1. Install in Device, works but opr. name keeps reverting back.
2. Decide to uninstall from Remove Programs, but says that it cannot be removed.
and "emunutz OpMon" remains on the remove programs list and on device.
3. Tried uninstalling with MemMaid, mentions that there is an error but I force uninstalled. Files & regs are gone (I think..) but OpMon still remain on the list!
Help?
ps. I've had this problem once with the HTC Diamond Keyboard circling around. Except that one didn't uninstall at all no matter what I try and had to HR.
Doesn't seem to work on Verizon. I have the settings confirmed and it still says Verizon Wireless.
great program been looking for it for sometime thanx
Hello,
Is there a way to keep the changes after turning off the device (HD) and even after SR?
Thanks!

default IM on WM6

Ok, I'm having a little problem with my default sip, on a newly installed WM6 rom on my MIO A701 (found here).
I can only use a HTC phone pad, which is available somewhere on the net ^^ It's the only one that has a good cellphone-esque layout AND all portuguese symbols.
I'm having a lot of trouble setting the Phone Pad as a default On WM5, I used IMSelector or SipChange and it would end up working fine. Right now, SipChange isn't doing anything, and IMSelector is on the same boat (the only version I found was the WM5 one). Right now, I can't even use Phone Pad, because every time I try to change the keyboard it automatically switches back to the default windows one. Although I did get to use phone pad right after I installed it, so it does work on WM6.
So, is there any other way of changing the default keyboard on WM6? I really need this keyboard working, and didn't really want to switch back to WM5
Thank you.
Bazaa said:
Ok, I'm having a little problem with my default sip, on a newly installed WM6 rom on my MIO A701 (found here).
I can only use a HTC phone pad, which is available somewhere on the net ^^ It's the only one that has a good cellphone-esque layout AND all portuguese symbols.
I'm having a lot of trouble setting the Phone Pad as a default On WM5, I used IMSelector or SipChange and it would end up working fine. Right now, SipChange isn't doing anything, and IMSelector is on the same boat (the only version I found was the WM5 one). Right now, I can't even use Phone Pad, because every time I try to change the keyboard it automatically switches back to the default windows one. Although I did get to use phone pad right after I installed it, so it does work on WM6.
So, is there any other way of changing the default keyboard on WM6? I really need this keyboard working, and didn't really want to switch back to WM5
Thank you.
Click to expand...
Click to collapse
Try SKtools, there one function to switch in the start of the system to your favorite keyboard!
edit the link in autostart folder and rise the timeout value (if you use sk tools). in sipchange you can set the timeout directly in the programm. i had the same problem on wm6 setting phonepad as default.
Thank you, that did the trick
Bazaa said:
Ok, I'm having a little problem with my default sip, on a newly installed WM6 rom on my MIO A701 (found here).
I can only use a HTC phone pad, which is available somewhere on the net ^^ It's the only one that has a good cellphone-esque layout AND all portuguese symbols.
I'm having a lot of trouble setting the Phone Pad as a default On WM5, I used IMSelector or SipChange and it would end up working fine. Right now, SipChange isn't doing anything, and IMSelector is on the same boat (the only version I found was the WM5 one). Right now, I can't even use Phone Pad, because every time I try to change the keyboard it automatically switches back to the default windows one. Although I did get to use phone pad right after I installed it, so it does work on WM6.
So, is there any other way of changing the default keyboard on WM6? I really need this keyboard working, and didn't really want to switch back to WM5
Thank you.
Click to expand...
Click to collapse
Please send me A701_USB_ROM_updater.zip
[email protected]
sdr said:
Please send me A701_USB_ROM_updater.zip
[email protected]
Click to expand...
Click to collapse
U know that mio a701 = Scoter
so there it is all u need:
I use program sipchange 1.1 or phoneAlarm
SIP need to set every reboot that bill gate brain.
Work fine on WM6.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
maremestera said:
U know that mio a701 = Scoter
so there it is all u need:
Click to expand...
Click to collapse
i think i'm doing something wrong, when i run the udater tool i always get a error. so i don't can't load the WM6-EN-1948-18548-MKX.zip

Categories

Resources