hi
I have tried to upload a german language pack to my o2 xda 1 but cabel broke now it is freezed on that screen
at first I started phone in Bootlader mod 5.14 and tried to ubgrade it with sd card but after upgrading it doesn´t even go into bootloader mod after reset only upgrading screen and nothing more
is it gone forever now?
how to solve that any advices?
greets
hi
I can´t belive that noone have any solution for that problem
so it is
it seems that I´m alone with this problem
anyone else with same troubles here ??
Related
Anyone have rom PW10B1, i tried to use adaptrom but until step 4 everithing stop and my XDA screen becomes hang (white screen) I need to know how to solve this problem because i can't access my bootloader..i want install PPC2002 3.17.03 version.....please help......
I had exactly the same problem using 'PW10B1'. In the end I decided to upload the ROM via the SD card..everything worked fine then.. not sure what the problem is though or how to solve it.
How to upload
Hai gdavies100,
You can access the bootloader ? i tried push power botton and do soft reset in the same time but show only OZONE on my screen. If you solved already the problem like this please let me know step by step how to do it. Thanks for your repply.
i just upgraded to O2 latest ROM which is 1.30.xxx. and it wont power up again. After browsing the internet, someone said is the bootloader causing problem. so i checked my bootloader, and it is v1.00 and it should not be a problem. Is any one having the same problem???
or is anyone can teach me how to flash the old ROM wiht a dead xda exec :roll: :roll:
Just a dumb question from me, did you hard reset the device after the upgrade?
Dead exec?
Try to reflash again
its work!!!!
it was the latest O2 ROM (v1.30.162) giving me problem. i have done soft/hard reboot after the upgraded the ROM but it wont power on. So i reinstall the old ROM and it works!!!! Any idea what is wrong with the v1.30.162?
hi all,
i have an htc p 3300, actually used to have... becasuse;
i have tried to upgrade to wm 6.0... no problem seems to appear for the first two days... but then, suddenly screen gone black... i have tired to reboot it but no way... i took the battery away for a while... then it worked... i downgraded to 5.0... but the same problem still exists... now the situation is; if i remove battery for a while, it works; both in bootloader, and normal wm 5.0... i uspl it, flash new rom... but the common things such as 260-270 errors etc... a few times i succeeded to flash new rom... it worked again.. but then screen goes black as if it was broken... it is freezing and getting fade to black...
any body could help me???? i've been working for 3 months.... i bought a new kaiser plus a new iphone... but i miss my arteMISS
hate to say it but in this situation I'm inclined to think that it is a hardware issue.
Sorry you have this issue. I have a service manual for my Wizard/Prodigy.
There may be a way for you to put your ppc into bootloader by using the buttons, and then reflash the rom.
I once had a malfunction flashing the rom and that fixed it. on mine it was [Camera +Reset+release camera] i don't know if that might work, but it is worth a try to put your phone into bootloader first. also, you should remove the battery and hold the power button for a few to make sure that the ram is completely wiped. Flash the official rom and see if that worx.
Good luck.
hi
My artemisis also dead. Afterhard reset it start the bootscreen and nothing als. What must i do ?
Please helo my. Thanks
Hey
so before this happend i used mwifi router app for like an hour the phone got hot abit so i disabled it and disconnected ,then wifi stopped working :S , this morning i just thought hey i will just reflash to defaults and i did ... as usual i done that few times and nothing bad happend , until now
only says : device booting ...
ipl 0.8 ;/
i have no idea what to do thats my only phone at this moment , any thoughts on how to bring it back to life ?
nothing interrupted the flashing so i dont know what failed
I am facing the same problem
try downloading the AL1.DIO again, maybe it was corrupted, and then re-flash your device.
Hope this helps.
Everyone who encountered this problem! Try another MiniSD card. Encountered this twice. First - my O2 atom Life. Second - G6 Rover. In both cases, helped to change MiniSD Card
well my phone after i flashed and installed wm 6.5 it was working totally fine, but this morning i turned it off and then on and it totally freezes at the startup screen and never loads windows. what i can do?
i'll appreciate any comments
i have then same problem switches on displays, disigned for windows mobile 6.5.5 then freezes
Yeah many ppl has this issue... be sure to flash first the att stripped att stock rom then hard reset then boots then reflash the custom rom then hardreset then try again to use th rom maybe it works ok now
I have the same problem
but I have the same problem. I bought a second hand phone and also freezes on the welcome screen and to make the rom? I need it so I can re-flash the windows
I have problem with my tytn, i was traying 7-8 rom of win mobile 6.1 or 6.5 but no help, my htrc cant find nework or when he find network he was online 1 hour and after hat he he offline in phpne mode, what is a problem, radio, rom or... ????
miljan017 said:
I have problem with my tytn, i was traying 7-8 rom of win mobile 6.1 or 6.5 but no help, my htrc cant find nework or when he find network he was online 1 hour and after hat he he offline in phpne mode, what is a problem, radio, rom or... ????
Click to expand...
Click to collapse
try to upgrade radio version on your device !! you can find Radio Rom Wizard in http://forum.xda-developers.com/showthread.php?t=300713 or at http://forum.xda-developers.com/showthread.php?t=268031
i cant start update proces always error 260 or 262
Jasjam Freez on i-mate logo
Dear Friends
my jasjam stop on first screen(i-mate Logo) . I did soft and hard reset again and again but nothing!i remove battery and sim card along the night but nothing again.pls help me what's problem
Thnkas and goodluck
Batman1351 said:
Dear Friends
my jasjam stop on first screen(i-mate Logo) . I did soft and hard reset again and again but nothing!i remove battery and sim card along the night but nothing again.pls help me what's problem
Thnkas and goodluck
Click to expand...
Click to collapse
probably you need reflash again your device with Original Shipped ROM
JasJam Freez on Logo
Dear Rahman
sorry for my bad english.Thank u for ur reply.jasjam freez on the first page!it mean i can not connect it to PC via active sync because it no load to windows!PC can not detect device!so how can i fix this problem without a PC connection ?