Hey
so before this happend i used mwifi router app for like an hour the phone got hot abit so i disabled it and disconnected ,then wifi stopped working :S , this morning i just thought hey i will just reflash to defaults and i did ... as usual i done that few times and nothing bad happend , until now
only says : device booting ...
ipl 0.8 ;/
i have no idea what to do thats my only phone at this moment , any thoughts on how to bring it back to life ?
nothing interrupted the flashing so i dont know what failed
I am facing the same problem
try downloading the AL1.DIO again, maybe it was corrupted, and then re-flash your device.
Hope this helps.
Everyone who encountered this problem! Try another MiniSD card. Encountered this twice. First - my O2 atom Life. Second - G6 Rover. In both cases, helped to change MiniSD Card
Related
Hi all,
Since last friday I'm the happy owner of an S200, until sunday atleast. After a soft-reset, initiated from windows, my device won't boot anymore. It hangs in the red-green-blue bootloader screen (says: IPL 2.09, SPL 2.09). I've tried soft-resets and hard-resets, but the device would consequently keep hanging in the bootloader.
So for the past few days I've been searching the web and just managed to update the ROM. I was expecting that updating the ROM succesfully would mean my device would boot again, but it still keeps hanging in the bootloader (saying IPL 2.09 SPL 2.15 now, so the update did take place).
Does anyone has any idea whats wrong with my phone? Or how to fix this? Please help.
* bump *
I've been searching further and tried to do a SD dump, but I'm getting the message I don't got enough rights to perform a SD dump. This meens my S200 isn't CID unlocked. Is there any way to CID unlock the device without the need of booting into WM?
The solution to your problem
Hello, if you are having bootloader screen right after starting your mobile (prophet) check if your camera button is depressed since i had the similar problem. In my case i had to disassembly the phone in order to fix it. Right after fixing the button it worked fine
hi syzzer,
i really feel with you - why? - i have the exactly same problem. after i tried to upgrade my rom from o2-germany to another one the device isn't starting anymore and hangs in the beautiful-colored bootloader. and now, if i just even want to re-install the same or another rom, doesnt matter which one, the s200 wont start again. i think this is a really unlucky situation for us to stand alone with our weak pda =) hoping for more help, otherwise we have to take up our warranty and try to get it fixed by the store we did buy it (if a rom-update damage is still in warranty )
good luck
budy!
awechris said:
Hello, if you are having bootloader screen right after starting your mobile (prophet) check if your camera button is depressed since i had the similar problem. In my case i had to disassembly the phone in order to fix it. Right after fixing the button it worked fine
Click to expand...
Click to collapse
in my case, the camera button is not pressed in... i truly don't know what to do hopeless? mhm?
greets!
budy!
hello Syzzer
I have the same problem, but i make a soft reset and it works.
Camera but + Com Button + Power
Wait until message appear.
You Get the message : For Hard reset press send
If you choose other key the system boots normaly.
I had already tried all your suggestions, but nothing seemed to work.
About a month ago I bought a Trinity. In the mean while, I forgot I had put my S200 in my bag and carried it around for a month. When I found it a week ago and started pressing random buttons, it suddenly booted and has been working ever since! The problem has gone as mysterious as it came. I can only imagine there was some hardware failure / dirt in my device that caused the trouble and is now gone / moved to some place it does not do harm. Because I already bought a Trinity, I gave the S200 to my brother. He's been using it ever since and did not have any problems. So keep your head up, there's hope!
I m also having the same problem
Now I am having the same problem, no button is pressed, and I can not install the NVID ROM
Actually I can install only a few ROMs, the NVID ROM was working before on my Neo perfectly but, I think it can be because I have changed many ROMs, from a month, actually I have tried different WM6 ROMs and I used NVID ROMs mostly for Step 1.
Now when I install any ROM, it shows a msg some nbf one after 80% or 95%
It can install the pdaviet first step ROM, but now the problem is that it hangs very much and it can not start Wifi, it has stopped working, a few more ROMs i have tried, but the WIFI is completely stopped.
When I press it in communication manager, it will show busy icon for a few seconds and will not start it in end.(I tried it in both WM5 and WM6, same problem, I also tried after soft reset and hard reset, the problem is still there)
Please someone help me out.
Hi All,
I had this device for few months now after selling off my Eten X500.
The Universal was a big device but I truly loved the XGA big screen. And yesterday disaster struck. Normally sometimes the device would go haywire but a few soft resets or hardreset would set it back on course. But yesterday it refused to move on from the bootloader mode and when I used Buzz utility prgram, it did move away from the bootloader but didn't swith on anyway. And yes, I have flashed the ROM's quite a few times and I managed to flash it with T-Mobile's latest WM5 ROM today morning. The flash was successful but it just wont work normally.
I have 2 batteries but bith yieled the same result. I could only get it to switch on if I hardreset it on a table with 2 fingers firmly pusing the soft keys down. It would sometimes would boot but would hand after it fully loaded. I have removed the SD card as well as the SIM card. Not sure if the devie motherboard is having any issues or some connection problem. One thing for sure if I hold both edges of the device and press it hard and try a soft reset, it would boot sometimes. I even have the external battery charger and I can charger the batteries full.
Any idea how much would it cost (I'm in Singapore) for a repair or anyone who could help me with this.
The worst thing is, this is my only phone and I really need it to work asap.
Hope someone could shed some light on this.
Thank you all in advance.
Techx
Have a look at the wiki...
I had the same problem after I put it on charge with no battery in - very smart I know . It explains about using MTTY and how you format the DOC which should solve your problem - hopefully...
Hi all,
I tried the MTTY utility but I can format the DOC files. everytime I try to format it, I get an error like this :-
USB>set 14 0
HTCSF kEØ(HTCEUSB>task 28 55aa
Wait..
flFormatPhysicalDrive:status=20
Read data error in tag
DOC_format failed!
USB>
So anyone can help in this issue plssssssssssssssss
Thank you all.
Techx
anyone????
Anyone? pls help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Do h3lp!!!!!!!!!!!!!!!!!!!!!!!
Anyway of getting the unit fixed? Anyone from Singapore can recommend a shop or anything?
Hy could someone help me,
A day ago, my battery flated out, so phone did shut down, when i got home and charged it, i already werent working.. wm6 does starting to load up..
So, when its started up first screen comes up everything looks fine, then it goes to 2nd screen and then nothing happening.
i did hardspl to it ages ago, but what sould i do now? i tryed to reflash it with the same rom, but it sais that it cant find devise. i've tryid to do the same in bootloader mode, doensnt do anything ither.
so what should i do? plz help me, i cant live without cell.. its so wierd without it.
try flashing with ur microsd card
thanks its worked
hi all,
my jasjar had an error while upgrading to ranju 7.7,
i tried to reset, didn't came back,
hard reset neither,
i went to bootloader mode, i could,
i connected it again to the pc, it showed usb,
i tried to flash to Rom that was working previously it arrives to 7% than stops,
what should i do ...
i tried to flash with official rom, it says that the rom wasn't designed for this model, it has worked before...
please help...
Hi,
if you search in the ranju's thread there's the solution.
You could have the doc corrupted. Simply read the wiki,
you must use mtty to format your device and then reflash the rom you want (with radio rom also).
Had similar problem
upgrading Imate JasJar to Ranju 7.7, only at first it showed as success, then it started behaving funny during customization, then failed to customize, then got stuck on Windows 6.1 green flash screen and eventually refused to budge beyond blue Imate screen with versions info. I tried everything, a few dozens of hard resets returned me to the same problem, removing the battery didn't do much and mtty didn't show USB as available option, so couldn't even use that. I was pretty much stuck solidly and for a while. At my wits end I read that problems like mine are associated with DOC corruption and my JasJar is as good as dead, quite a few people suggested to those who are in the same position to throw their bricked babies away, as there is no economic solution apart from sending it for service where the corrupted chip may be replaced. What do you know, I followed wiki recommendation and entered a boot screen by pressing light power reset, then just flashed back to Ranju 7.6 and my JasJar was brought back to life!!! The update went without a glitch and everything is working fine. I guess I will keep the 7.7 on my O2 and 7.6 on my Imate for now, won't be risking an update anymore on the JasJar, don't think I have much hair left after all the pulling I did trying to bring it back to life. Hope this helps someone in the same predicament
jokove said:
hi all,
my jasjar had an error while upgrading to ranju 7.7,
i tried to reset, didn't came back,
hard reset neither,
i went to bootloader mode, i could,
i connected it again to the pc, it showed usb,
i tried to flash to Rom that was working previously it arrives to 7% than stops,
what should i do ...
i tried to flash with official rom, it says that the rom wasn't designed for this model, it has worked before...
please help...
Click to expand...
Click to collapse
does it turn on at all?
Does the device turn on at all after a hard reset?
Dude, I had a same problem it rectified though, check following of my blog...
http://jay-joshi.spaces.live.com/blog/cns!851D717EDFF14CEC!3258.entry
or
http://buzzdev.net/read.php?40,13307,page=1
Rarest_Kind said:
Dude, I had a same problem it rectified though, check following of my blog...
http://jay-joshi.spaces.live.com/blog/cns!851D717EDFF14CEC!3258.entry
or
http://buzzdev.net/read.php?40,13307,page=1
Click to expand...
Click to collapse
Problem resolved?
Hello.
Had a previous problem with my O2 Atom.. It freezes most of the time, when i tried to soft-reset the device.. it freeze at start-up (at the O2 Screen)..
Ive tried reflashing the ROM (both WM5 - Quanta and WM6 - Master Jiggs) via bootloader, but after reflashing the device, it will also still freeze at "Device clean boot".. I've just reflashed my atom (again) and i cant use it no more
Ive managed to go to Diagnostic Mode, All 5 test went well except for the flash test (failed).. Does this mean i have a bricked atom?
Also, Ive already tried removing the battery and putting it back in after 2 days (well, just to be sure..) but still the same problem.
Please help me bring my atom back to life.. no social life here
Thanks!
Alibot
I'm not sure what the exact problem could be but you could always try flashing with a new/empty SD card with just the ROM you want to use and see if that works.