How to shut off camera light / flash? - 8125, K-JAM, P4300, MDA Vario General

My camera flash / light came on for no reason yesterday. Now I can't shut it off. It's killing my battery.
Thoughts or help?
Thx.

Take the battery out quick... a number of guys have burnt their flash leds out on the Universal, using VJCandela. You don't want to risk burning it out, but for research, how long has it been on for?
V

vijay555 said:
Take the battery out quick... a number of guys have burnt their flash leds out on the Universal, using VJCandela. You don't want to risk burning it out, but for research, how long has it been on for?
V
Click to expand...
Click to collapse
Thx for the reply, Vijay555.
To answer your question, it's been on for about 24 hours. I've performed a soft reset no fewer than ten times. I've also turned the phone off and removed the battery for a spell. Nothing is helping.
Strange, this device was performing flawlessly until a few weeks ago. Now it's the wonkiest phone I've owned to date. I still love it but have considered throwing it against a wall.
One other note: When I put the battery back in and the phone is OFF the light comes on. Go figure.

Sounds like a hardware fault. Backup and then hard reset.
If you find it necessary to throw it at the wall, please throw it my way, I need to get hold of a Wizard to finish VJCandela!
V

vijay555 said:
Sounds like a hardware fault. Backup and then hard reset.
If you find it necessary to throw it at the wall, please throw it my way, I need to get hold of a Wizard to finish VJCandela!
V
Click to expand...
Click to collapse
I was hoping to avoid the hard reset. Too busy with work and can't afford to be fooling with the setting it all up right now. Might have to sacrifice the light.
Worry not, if I go to throw it I'll think of you.

did you get one yet...
vijay555 said:
Sounds like a hardware fault. Backup and then hard reset.
If you find it necessary to throw it at the wall, please throw it my way, I need to get hold of a Wizard to finish VJCandela!
V
Click to expand...
Click to collapse
i tried your v0.3 candela on my 8125 and no lightie.

you can get a trial version of SPB back up that will back up your phone, install that, back it up, then hard reset and run the back up to restore all the stuff on your phone.. no need to worry about setting it all up... however from what you described about the phone being off and the light coming on sounds like a hardware fault.. but a hard reset is worth a try

Related

Kill lights

Is there a way to stop/disable the flashing lights, particularly the one on the right hand side of the unit?
...my wife hates them flashing and I cannot keep the device in the bedroom at night!!!
Easy one this to solve, move the wife out of the bedroom
I have been looking for a long time for registry hack or a button to disable her alltogether, or to the very least turn off the Voice/sound function, but to date I could not figure it out!!!
Is there anyone out there who can help. I am sure there are millions of men who would be willing to pay for the solution.
My god yes, im so glad im not the only one the wife goes mental with the falshing lights at night
Why not use an indellible marker to paint them out, or for a less "permanent" solution, use a couple of pieces of black insulation tape?
Cheers,
Steve.
put it in a thick winter sock to hide the flash?
Tweaks2k2 was always good at this, unfortunatly it doesn't support turning the LEDs off on the Universal yet.
I'm sure it will only be a matter of time though.
brnoblade said:
Easy one this to solve, move the wife out of the bedroom
Click to expand...
Click to collapse
By far the best solution. LOL
Ant
The wife cant moan at me as her phone is a samsung e720 which has a really strong blue screen glow.
Anyway if she does moan I wont let her use it in bed when she wants to check her ebay :wink:
Put it on charge, noticed last night that lights stop flashing and only orange charge light comes on and does not flash while on charge.
Regards
gooroo said:
Put it on charge, noticed last night that lights stop flashing and only orange charge light comes on and does not flash while on charge.
Regards
Click to expand...
Click to collapse
The bluetooth light still flashes though :wink:
Then disable bluetooth
"HKEY_LOCAL_MACHINE\Drivers\Builtin\AllLEDMgr" should be the control strings for the LEDs
Try to change something there
BalooDK is correct.
Whilst doing some research for VJElectrify yesterday, I came across this aswell.
I really don't recommend it, but navigate to
"HKEY_LOCAL_MACHINE\Drivers\Builtin\AllLEDMgr"
and rename the dll value "AllLEDMgr.dll" to "AllLEDMgr.dllVJ".
Ensure the value has been set and soft reset. Ta da! No leds.
However, highly unrecommended since you can't tell when bluetooth is on.
Obviously rename to original name to reverse this effect.
There are other less invasive ways to achieve this, but this seems to work well.
NOTE I strongly recommend you export this registry branch before modifying it. You can cause problems in this area of the registry by accident. It's also easier to just import back the old settings when the wife is out of sight!
V
I tried editing above registry value and the lights stoped.
But after a while ... The lights start flashing again ...
I really really don't understand how.
Then I tried to delete the whole "DLL" Value. After a soft reset, the lights where gone. But again back after a while ...
How is this possible. Does WM5.0 have ARR? (Automatic Registry Rebuilder
P.S. Where is the .dll in explorer? Not in my Windows or system dir.
Need to make VJSTFU-woman One day...
V
brnoblade said:
Is there anyone out there who can help. I am sure there are millions of men who would be willing to pay for the solution.
Click to expand...
Click to collapse
Hey!
me and vijay555 are trying to solve the wife problem very hard, for some time now...
It seems, that at first, the project should be renamed to "Kill wife" instead of "Kill lights".
There seems to be a solution for that...
buzz
Try applying the Gucci_HandBag_v0.5 patch. I find that it provides a temporary solution.
However, as Buzz says, we've found better results by twisting her display area back on itself a couple of times. Her buttons will seem to light up, but the rest of the unit will provide adequate functionality without the irrating bugs. Just don't forget to enable the HKLU > IHaveAnAlibi registry setting first :wink:
V

hardwarre problem on wing

so i think my wing may be in the process of biting the big one. A few days ago, my wing restarted itself for no reason, i figured it was probably a system error and didnt think twice about it. Now all of a sudden my wing will constantly restart, sometimes in the middle of a call. Sometimes when it does restart the screen will either turn white or fade to white. I reinstalled the original rom to see if it was a software issue and it is still doing it. Also, it doesnt normally do it when it is just sitting there, and sometimes i cant turn it back on. Any ideas?
Make sure the battery isn't loose inside the case... and that all the prongs are making contact.
For the life of me, i cant figure it out. I know it has to have something to do with the phone not getting power. At this point, it wont even fully turn on. Short of taking it apart and checking the solder, does anyone have any ideas?
dcmtnbkr said:
For the life of me, i cant figure it out. I know it has to have something to do with the phone not getting power. At this point, it wont even fully turn on. Short of taking it apart and checking the solder, does anyone have any ideas?
Click to expand...
Click to collapse
If you already reflashed the original rom, and it is still doing it, that tells you it is definitely a hardware issue. It does sound like it's losing power which could be a host of things. (loose battery, defective battery, loose solder on board, etc) I would try what duprade said, and check to make sure your battery has a good connection first. If you had a friend that had a wing as well, you could try his to make sure it's not the battery.
dougstoner said:
If you already reflashed the original rom, and it is still doing it, that tells you it is definitely a hardware issue. It does sound like it's losing power which could be a host of things. (loose battery, defective battery, loose solder on board, etc) I would try what duprade said, and check to make sure your battery has a good connection first. If you had a friend that had a wing as well, you could try his to make sure it's not the battery.
Click to expand...
Click to collapse
Brand new battery (free from tmo to replace the dynapack) Everything on the mainboard looks like it is soldered well. There is an internal watch batter though, could that have something to do with it?
dcmtnbkr said:
Brand new battery (free from tmo to replace the dynapack) Everything on the mainboard looks like it is soldered well. There is an internal watch batter though, could that have something to do with it?
Click to expand...
Click to collapse
I doubt it. I would guess that's the cmos battery. If that were to go, then your phone wouldn't keep time, but that wouldn't stop your phone from functioning. (I used to work in the service center at a computer store).
maybe its the processor then. sometimes, after it freezes, it artifacts before shutting off
dcmtnbkr said:
maybe its the processor then. sometimes, after it freezes, it artifacts before shutting off
Click to expand...
Click to collapse
There is the possibility of you overclocking your phone, and it heated up and could have burned or cracked some solder. It might even be overheating and that's why it reboots. At any rate, it def. sounds like hardware though. Sorry man. You could try to resolder the connections on the board just to make sure, but it sounds like you have a paperweight. Is it under warranty or do you have insurance?
only ever oc'd once, for a few minutes, and not very high (like 267 i think) It's on right now on the power cable (this wouldnt work yesterday) I honestly have no fricken clue whats going on with it.
Is it possible for the battery to completely diminish itself without being used for a day? Before it died on me last, it had a full battery, now it is showing 1% (and charging).
By the way, as I stated above, it is a brand new battery sent to me by tmo.
Dang it all! Stupid thing just shut off again... ARG!!!
dcmtnbkr said:
Dang it all! Stupid thing just shut off again... ARG!!!
Click to expand...
Click to collapse
Hey dcmtnbkr. I seem to have the exact same problem with my Wing. It shuts off for no reason, and it does it absolutely randomly. Sometimes it would work for 3hrs straight no matter what i use it for. And other times it shuts off every 30sec. and it takes 3 to 10 tries to turn it back on(most of the times it would not get past the windows mobile welcome screen). I was gonna flash it with the newer Rom, but i'm afraid that the damn thing might shut off during flashing . So i'm stuck. If you find the way to fix it - please let me know.
actually, i just talked to tmo, and apparantly NOW after i told them I'm cancelling when my contract is up, now they can apparantly cover it under manufacturer warranty (as opposed to the last time i called about a week ago) I would call them even if you didnt buy it from them, tell them you dont remember where you bought it, but it was some company online. These phone's arent that old and you may still be under the manufacturers warranty. Also, i would try and flash it back to the original. These phones are very hard to brick, and i would ask around to see if a powerdown in the middle of an upgrade would do it. I just got mine to reflash without a problem.
my wing rstarts itself wen i jus tap the back of it where the battery cover is but it wont restart everytime. anyone have any ides?

Questions and Answers Section for BA Forum. Post Your Questions Here.

@All,
As a celebration for my 1000th post, I decided to open a new thread based on Tweakman's idea, which seemed to work very well in the Development and Hacking Section. The idea is simple, a single thread for all Questions, Problems, and Concerns regarding Blue Angel. This includes, but it is not limited to:
[highlight]*Problems with Flashing.[/highlight]
Can't get your device in bootloader? Did it freeze during flashing and now it doesn't get past the 4 colored screen? Are you a complete noob and need some guidance as to how to flash? Etc.
[highlight]*Have questions about which Rom is best?[/highlight]
[highlight]*Want to install software but don't know if it is compatible with your BA[/highlight]
You get my point. All the questions that I have seen/answered over the past couple of months are just repetitions of posts, threads, and things that are readily available on the wiki or in other threads. However, people are either lazy, don't know what a Wiki is / where to find it, or just flat out don't know how to search (or read the forum rules for that matter). Having something general (in this case a sticky) that says "Hey, if you have a question, you can ask here" should draw enough attention and start minimizing the number of new threads and posts opened by users (both new and seasoned). This way, we will be able to keep the development threads a little cleaner and smaller... hence making the site's search function work a little better in the process.
@Seniors,
Kinda like the Q&A team, I will need your help in trying to keep the influx of questions to a certain level by answering them as we see them. None of us are logged in 24/7 (or at least some of us aren't ), but if you guys see a question, please try to answer it. I know that xplode, Chef_Tony, markanthonypr, red_hanks, sun_dream, imatrix, +Que_PPC, motisu, and others normally try to keep this under control, but if we centralize it and contain it, we will have a cleaner forum.
Reserved for future use.
Post Stickied Per Request...
Siemens SX66 BlueAngel Q&A, Help
You know very well you can count on us. Great idea mate. Also congrats on your 1,000's post. I've added a few "tags" to the thread. I hope some others do the same to. Tags help users to find what they are looking for when they use search.
hi
hi specialists
my friend has Blue Angel,he has strange problems.
in (sounds & notification),it didnot saved after changing any parameter,we tried by reflash the rom again,but nothing changed,also we reinstalled radio 1.15 but no change,also the ring tone of the msg is discontinue or irregular when played,and some times didnot wake up (of the device) when recieve a msg.
this is strange issued problems but in mine (BA) every thing is ok,this problems only in my friend (BA),I mate PDA2K.
any ideas?any suggestions?
thnx
notice:when we down grade to wm 6.1 every thing is ok
homam_france said:
hi specialists
my friend has Blue Angel,he has strange problems.
in (sounds & notification),it didnot saved after changing any parameter,we tried by reflash the rom again,but nothing changed,also we reinstalled radio 1.15 but no change,also the ring tone of the msg is discontinue or irregular when played,and some times didnot wake up (of the device) when recieve a msg.
this is strange issued problems but in mine (BA) every thing is ok,this problems only in my friend (BA),I mate PDA2K.
any ideas?any suggestions?
thnx
notice:when we down grade to wm 6.1 every thing is ok
Click to expand...
Click to collapse
Hey homam,
Thanks for kicking things off
First of all, which OS were you having problems with? This is important because it could have been a bug in a rom that could have been fixed in a later version.
@mark,
I know I can count on you, buddy I need help from the mods as well though. I cannot redirect posts to here and/or close threads
My BA, keeps turning on from standby, by a light shock! I maen, if you press the Power button, and then you knock gently on it's back, it turns back on!!
I've set to "Lock all buttons except the power button", However, I still have this issue.
Well, I must confess that once it dropped off of my hand, and it's the result of that...
Any ideas?
by "it turns back on" i assume you mean it wakes up from stand by, it doesn't really start like after a soft reset, right?
since the BA's only battery activated wake-up is in the cradle and we are not talking about soft reset, my first guess is, the battery is not to blame.
have you checked whether you can use your camera at all time? i mean, the camera_detect does not usually run at all times but if the camera connector is a little lose, from now and then it could "discover" the new camera hardware and wake up, that is unlikely for normal devices, but if yours had a crash before...
you could refer to this site for checking possible hardware reasons:
http://www.land-of-kain.de/ppc/mda3/disassembly/
the hardware things aside, there are also many possible software reasons for the device to wake up on:
- update of titanium weather
- automatic email checking
- cell broadcast
- if bluetooth is on
- if beam is on
- automatic update of any software...
plus of course the usual:
- incoming call
- incoming text message
- incoming mms
- upcoming calendar event...
so please check the possible software wake ups first to make sure this is really a hardware issue, because that would be a shame, that could be tricky to solve.
or let me put it this way, if it is really the moving that wakes it up, you have the first BA with accelerometer
EDIT: last but not least, it could only be a bug, maybe a hard reset or change of the rom could also be a way to go, since spontaneous waking up is a known bug for BAs
Chef_Tony
If there was only a way to hack the hardware and make this work at least on Edge. I can live with everything else, but its a shame paying for a full unlimited Internet service and only getting G connection Sighhhhhhh
Ok, I had to let that frustration out !!!!!!
Chef_Tony said:
by "it turns back on" i assume you mean it wakes up from stand by, it doesn't really start like after a soft reset, right?
since the BA's only battery activated wake-up is in the cradle and we are not talking about soft reset, my first guess is, the battery is not to blame.
have you checked whether you can use your camera at all time? i mean, the camera_detect does not usually run at all times but if the camera connector is a little lose, from now and then it could "discover" the new camera hardware and wake up, that is unlikely for normal devices, but if yours had a crash before...
you could refer to this site for checking possible hardware reasons:
http://www.land-of-kain.de/ppc/mda3/disassembly/
the hardware things aside, there are also many possible software reasons for the device to wake up on:
- update of titanium weather
- automatic email checking
- cell broadcast
- if bluetooth is on
- if beam is on
- automatic update of any software...
plus of course the usual:
- incoming call
- incoming text message
- incoming mms
- upcoming calendar event...
so please check the possible software wake ups first to make sure this is really a hardware issue, because that would be a shame, that could be tricky to solve.
or let me put it this way, if it is really the moving that wakes it up, you have the first BA with accelerometer
EDIT: last but not least, it could only be a bug, maybe a hard reset or change of the rom could also be a way to go, since spontaneous waking up is a known bug for BAs
Chef_Tony
Click to expand...
Click to collapse
Wow! Tony! I really appreciate your complete answer. I mean it.
Yes, as you correctly assumed, I meant wake-up. It just wakes up and continues the routine WinMo operation; no soft-reset occurs.
It's less than a year that I've replaced the battery with a new one. I remember all the funny things used to happen when the old battery was dying. But non of them were similar to this one.
It can't be the Camera. Well, I'm able to use it all the time, and the "camera_detect" has been always loaded in the processes whenever I've checked it. About the looseness thing, ummm, I'm not sure. I tried to knock on it to see if it's more sensitive than other parts. I think the upper part of the device is more likely to wake it up by an easy hit (like knocking). but it's the whole upper part, not only the camera section nor the camera button.
Unfortunately, the software possibility, is unlikely to be the problem:
I've used many ROMs on my lovely BA which 3-4 times of them taken place since the wake-up problem.
The software and the usual reasons you counted, do wake it up. but shakes, too.
Finally, to be honest, I'm agree with you! This is the first Blue Angel with accelerometer. yeaaah! I did it!
I bet my friends that I can wake my BA up, without touching any buttons or screen! It's fun this way, but I comes to be annoying when I put it in my pocket or just put it on a table! and it wakes up... consider the forced battery consumption, unwanted screen taps if I don't lock the screen. God bless A_C! and... .
I know it's a hardware issue (((((
@raizaM: My Thought.... Have you ever taken it apart? One of my BA's had 3 loose bolts inside. All 3 were from what I think is the Radio/Antenna part at top. However, in my case, I had a rattle going inside. Thats why I put it apart. You might have something loose inside, causing a connection to arc when you knock on your phone. If you do deside to open it, there is a tutorial on the wiki on how to.
markanthonypr said:
@raizaM: My Thought.... Have you ever taken it apart? One of my BA's had 3 loose bolts inside. All 3 were from what I think is the Radio/Antenna part at top. However, in my case, I had a rattle going inside. Thats why I put it apart. You might have something loose inside, causing a connection to arc when you knock on your phone. If you do deside to open it, there is a tutorial on the wiki on how to.
Click to expand...
Click to collapse
Hey mark!
I had that same issue a while back, but with only one screw (also from the same area as yours).
@raizaM
Just to knock off Chef_Tony's theory out of the table completely, try to erase camera_detect.lnk from \Windows\startup and SR your device. If Chef was right, then your issue might be gone. However, I would follow markanthony's advice and take it apart in case Chef's idea doesn't work.
Oh man, your not my hero anymore LoL.. and here I thought I would be the only one with a mechanic inside my phone.
markanthonypr said:
Oh man, your not my hero anymore LoL.. and here I thought I would be the only one with a mechanic inside my phone.
Click to expand...
Click to collapse
Well, it kept me entertained when my BA would run out of juice
Thanks for your kind advices.
Actually, I tried to remove "camrea_detect" from the startup once, but any way, I gave it a shot again... no success...
Frankly, I'm a lil bit afraid to take my lovely BA apart... :-s... What if... :-(
But, I guess sooner or later I need to do so. so what the heck... lets do it.
Maybe I'll do it tonight. Guys please help me through it. I don't wanna loose my Angel!
Ton'y link provided in the previous posts, would be my start:
http://www.land-of-kain.de/ppc/mda3/disassembly/
any more advices?
raizaM: You're not going to go that far deep. Only remove the cover. If you look at picture #4 on that link, the top green area has about 6 bolts all around it. Those were the ones that were loose on mine. 2 of them were rattling inside the phone. I still can't believe they didn't cause a short circuit. You don't need to go down into the camshell area. Do you use the sliding keyboard? If so, you could have a bad flex cable. But, don't worry about tha for now. Just remove back cover and carefull inspect for loose bolts. Don't over tighten them.
all the master please help, my BA strange,,,,, the screen suddenly go dead after actived wifi or playing game, its suddenly dead, and i must push power button to turn it on again through proses like softreset, that in battery power. but if i conect in charger power mode, i turn wifi,playing game, its normal, the BA still on and working normal,
please2,,,,,if someone knows the problem please help, im desper now....
loryshoe said:
all the master please help, my BA strange,,,,, the screen suddenly go dead after actived wifi or playing game, its suddenly dead, and i must push power button to turn it on again through proses like softreset, that in battery power. but if i conect in charger power mode, i turn wifi,playing game, its normal, the BA still on and working normal,
please2,,,,,if someone knows the problem please help, im desper now....
Click to expand...
Click to collapse
It seems that you have the backlight settings set to dim/turn off too fast. Go to \Settings\System\Backlight and modify the settings in there (particularly the ones labeled "On Battery Power"). Then, soft reset the device (stylus on the bottom).
Hope this helps.
markanthonypr said:
raizaM: You're not going to go that far deep. Only remove the cover. If you look at picture #4 on that link, the top green area has about 6 bolts all around it. Those were the ones that were loose on mine. 2 of them were rattling inside the phone. I still can't believe they didn't cause a short circuit. You don't need to go down into the camshell area. Do you use the sliding keyboard? If so, you could have a bad flex cable. But, don't worry about tha for now. Just remove back cover and carefull inspect for loose bolts. Don't over tighten them.
Click to expand...
Click to collapse
egzthunder1 said:
It seems that you have the backlight settings set to dim/turn off too fast. Go to \Settings\System\Backlight and modify the settings in there (particularly the ones labeled "On Battery Power"). Then, soft reset the device (stylus on the bottom).
Hope this helps.
Click to expand...
Click to collapse
not the setting, it got black scren, its dead screen after running wifi or application, suddenly goes dead, black screen,.
Have you tried with another battery? It sounds to me like your battery is about to die. It won't hold the heavy battery consumption of Wi-Fi and heavy CPU usage while on Games. Try with another battery. Also make sure you followed Egzthunders suggestion to change your Power Settings. If you still need help, post back and include more info about your device, such as, what version of Windows are you running and how old/new is your battery.

worse then soft brick, HELP!

ok so basically i installed a custom rom, great.. not really.
it wouldn't connect to a network, my usb failed and countless other things were missing.
fine and dandy, rom manager asked me to do a backup of my original rom so i'll just load that... file unloadable.
great.
Miraculously i managed to get a new rom on my sd card and installed it.
got stuck at bootscreen then loaded in to a black screen that only showed the notification bar.
by now i've gotten pretty flustered and figure a battery pull should re set everything and let it load up fine (after all i'm a previous bb user lol)
but no
no, now my phone won't even power on.. even when i plug it into the wall to charge the screen stays black.
holding any button combination doesn't work..
its literally a brick.
is there any way to fix this?
so far all i've found are fixes for "soft bricks"
sounds like i'm a little past that stage...
Ok, take out the battery, sim, and sd card from your phone. Now with the battery out, plug the phone into the usb and connect to pc. Now, while holding down the volume up/down at the same time, but NOT the power button, put in the battery. And there you should have download mode, odin away.
Good luck.
kylecore said:
so far all i've found are fixes for "soft bricks"
sounds like i'm a little past that stage...
Click to expand...
Click to collapse
I'll give you $100 for it, PM me
Telanis said:
I'll give you $100 for it, PM me
Click to expand...
Click to collapse
well i had just bought it that day so it was covered under warranty.
i took it back and told them the upgrade to 2.2 did it.
they gave me a new one no questions,
it also helps that i work for them and am their tech guy so they would have given me the phone to try to fix had it been a customer lol.
kylecore said:
well i had just bought it that day so it was covered under warranty.
i took it back and told them the upgrade to 2.2 did it.
they gave me a new one no questions,
it also helps that i work for them and am their tech guy so they would have given me the phone to try to fix had it been a customer lol.
Click to expand...
Click to collapse
Please stop scamming...
Its "worse than", not "worse then"
grennis said:
Its "worse than", not "worse then"
Click to expand...
Click to collapse
This too...

[Q] It seems to be a "full brick"

Was updating using Odin when, as my luck always proves out, a circuit breaker tripped and cut power to my PC. The phone seemed to be frozen on the "Download Mode" screen (30+ minutes of zero activity) so I pulled the battery. Upon reinserting the battery I discover that the phone is 100% unresponsive. I've tried every trick google could produce for me with the exception of the "homemade jig" method as it seemed fairly clear that the phone needed some semblance of life for that to be effective.
So, my question is... WTF??? I've soft modded wiis, hard modded xboxes, hacked PSPs flashed hundreds of phones and generally revel in futzing around in this manner of endeavor and have NEVER bricked a device (even after some incredibly stupid mistakes). This just doesn't make sense and I haven't seen sysmptoms such as mine presented in any of my web searches. Any ideas???
I'm not saying your not a modder, but you should know to have a UPS hooked up to your dev box, for me its a laptop, so...
Anyway, try removing the battery for 1m, press power button with batt removed, now start up Odin, plug the phone in (batt removed still) and see if the phone connects. I'm sure someone will pop in here and provide links to several threads that describe different methods to help you fix this, I would but I'm sorta busy...
Help support autism awareness,it only takes 2 seconds to help make a difference...
http://picketfenceblogs.com/vote/3616
Sent from MyEF02 using XDAPA...
Keep the battery out for like a half hour and then try again. That has worked for some people.
Or try the mysterious button that may or may not exist. I know I'd be pushing the heck out of it just in case.
Thank you so much for your quick input... I tried precicely that 3-4 times (google search turned it up) and it was a futile endeavor.
And yes, I am fully aware of all the proper precautions to take, unfortunately I am also fully stupid with frightening regularity (well, maybe just lazy and reckless), I seem to have become a tad cocky as I have never really had to face disaster before today.
It won't happen again!
plug phone into computer without battery. Then hold power and 1 to go into download mode (still no battery)
That there is what I've seen as most effective thing to work on bricked phone's.
cool... I just popped out the battery and will let you know the result in about 40 minutes...
this happened to me recently, i found a post with the solution being to pull the battery out of the phone hold down 1 and the power button at the same time before popping the battery back in and it will send you to the proper screen to odin back to what you need, worked perfect for me
oh crap I editted my previous post. i forgot to mention go into download mode...
It's --
Remove battery and plug into computer. then go into download mode WITHOUT Battery still.
If your not getting any sign of life from ur phone, try this:
http://forum.xda-developers.com/showthread.php?t=1042746
It worked for me.
Krojian said:
If your not getting any sign of life from ur phone, try this:
http://forum.xda-developers.com/showthread.php?t=1042746
It worked for me.
Click to expand...
Click to collapse
there is no hole in the back case of my device. I've had my device powered on and bent the **** out of a paper clip trying to push the 'hidden magic button' to no avail.
YMMV (false hope ??)
Cool, didn't know that little button existed!
I bricked mine the same way a few weeks ago and tried every trick in the book over the course of 2 days. It was truly bricked. I don't have insurance; however, my phone was under warranty. Since I couldn't get the phone to boot or anything I figured there was no real way of telling what went wrong. I sent it in for warranty repair and 10 days later, the phone returned in working order. Work order says they replaced the main board. I marked the phone before returning it so I know its the same phone and it works fine now.
And before anyone says anything, I know, I'm an evil bastard. But I figure it's payback for a samsung flatscreen that died 6 months out of warranty.
I've done this, leaving my battery out for 20 mins or so, and leaving it out while going into download mode worked for me. I don't know why but sometimes I can't even get into download mode with my battery in.
keeepinitgansta said:
Cool, didn't know that little button existed!
Click to expand...
Click to collapse
it doesn't..
to prove this (or dis-prove it).. go into clockwork and make a nandroid backup (you know, just in case)...then boot normally and while you're looking at your home screen, jam a paper clip in there as hard as you can. Your device will do nothing.
daddymikey1975 said:
it doesn't..
to prove this (or dis-prove it).. go into clockwork and make a nandroid backup (you know, just in case)...then boot normally and while you're looking at your home screen, jam a paper clip in there as hard as you can. Your device will do nothing.
Click to expand...
Click to collapse
I hope you guys are messing with him...
hardrock121 said:
I hope you guys are messing with him...
Click to expand...
Click to collapse
No, it's just not proven. Some people swear by it, some say it's a myth and some say it depends on when your phone was made.
Sent from Godot's place.

Categories

Resources