Database Users

Registry hack to turn off flashing LEDs - and phone Vibrate

To turn off all of the flashing LEDs (Blue LED from coming on with Bluetooth, Green for phone signal, Yellow for charging, etc), go to:
1. Hkey_Local_Machine/Drivers/Builtin/AllLEDMgr
1a. Change the Index value below it to "0" (by default it is set to "1")
Soft Reset and the LEDs will not turn on.
There is also an "LEDMgr" key at the same level, but it does not seem to have any effect.
This is a variant for the Magician of the original Blue angel thread:
http://forum.xda-developers.com/viewtopic.php?t=18861
Enjoy! (Finally, I can sleep with the jam on the end-table next to me at night ;-) )

I'm waiting for the hack/program that makes my LED pulsate instead of blink, like some laptops when in suspend mode.

Trick included in version 3.6.0 of Tweaks2k2 released today!
More info at www.tweaks2k2.com/downloads.htm

That's how I like it... grabbing the infos for free and integrating it into a commercial product.
The same has been with NetFilter code already in hardware appliances - they've been charged for it!
You should at least offer the original poster a license free of charge for gaining from his efforts.

Actually he did
Chatty,
I contacted Ctitanic to let him know about this key. He offered me a free license days ago, and I have been testing the new version for him. I wanted those who were uncomfortable hacking the registry to have access to this.
Sorry we didn't let you know first. Open mouth, remove foot ;-)

*ClickEditSelectAllDeleteSave*
Did I say anything? I always said, ctitanic is such a nice and humble person. I deeply honor his work.

Chatty said:
*ClickEditSelectAllDeleteSave*
Did I say anything? I always said, ctitanic is such a nice and humble person. I deeply honor his work.
Click to expand...
Click to collapse
jajajaja
it´s a no written policy of me to give free copies to those sending me hacks that are included in Tweaks2k2. If I find a little time I will write it down at my site so every body knows about it. But for now let me write it here
I GIVE FREE COPIES OF MY PROGRAM TO THOSE WHO SEND ME REGISTRY HACKS IF THOSE HACKS ARE APPROVED TO BE INCLUDED IN FUTURE VERSION OF THE PROGRAM.
:twisted:

Bummer :-(
I just verified that this registry hack also disables the vibrate function on my phone also :-(
Due to this, I'm backing off the hack (vibrate is more important to me). Doen't ask me why AllLEDMgr is controllling the vibrate function, but it is. I played with this area of the registry for a while, and couln't find a way to disable the LEDs, and have vibrate working. If anyone else does, let me know. Otherwise, I guess it's time for black electrical tape over the LED for me.
I'll let ctitanic know.

dschur said:
Bummer :-(
I just verified that this registry hack also disables the vibrate function on my phone also :-(
Due to this, I'm backing off the hack (vibrate is more important to me). Doen't ask me why AllLEDMgr is controllling the vibrate function, but it is. I played with this area of the registry for a while, and couln't find a way to disable the LEDs, and have vibrate working. If anyone else does, let me know. Otherwise, I guess it's time for black electrical tape over the LED for me.
I'll let ctitanic know.
Click to expand...
Click to collapse
Well, I´ll add this to the list of known issues. I think that for some people the hack is good even when it disables the vibration. In another hand, you can apply the hack during the night and activate the LEDs back in the morning

Is it possible to turn of LEDs/vibrate without a soft reset?

Technically yes... you have to end the service via a system call. One would have to implement this in a tiny program. Could be useful in apps like PZP - so go and tell zendrui

I'm using the Wizard with WM5 (Norwegian ROM), and I can't seem to find the AllLEDMgr key in the registry. Is this tweak for WM5?

@pborthwick: It is for the Magician... you posted in the Magician forum! The Magician is WM2003 btw.

How to shut off camera light / flash?

My camera flash / light came on for no reason yesterday. Now I can't shut it off. It's killing my battery.
Thoughts or help?
Thx.

Take the battery out quick... a number of guys have burnt their flash leds out on the Universal, using VJCandela. You don't want to risk burning it out, but for research, how long has it been on for?
V

vijay555 said:
Take the battery out quick... a number of guys have burnt their flash leds out on the Universal, using VJCandela. You don't want to risk burning it out, but for research, how long has it been on for?
V
Click to expand...
Click to collapse
Thx for the reply, Vijay555.
To answer your question, it's been on for about 24 hours. I've performed a soft reset no fewer than ten times. I've also turned the phone off and removed the battery for a spell. Nothing is helping.
Strange, this device was performing flawlessly until a few weeks ago. Now it's the wonkiest phone I've owned to date. I still love it but have considered throwing it against a wall.
One other note: When I put the battery back in and the phone is OFF the light comes on. Go figure.

Sounds like a hardware fault. Backup and then hard reset.
If you find it necessary to throw it at the wall, please throw it my way, I need to get hold of a Wizard to finish VJCandela!
V

vijay555 said:
Sounds like a hardware fault. Backup and then hard reset.
If you find it necessary to throw it at the wall, please throw it my way, I need to get hold of a Wizard to finish VJCandela!
V
Click to expand...
Click to collapse
I was hoping to avoid the hard reset. Too busy with work and can't afford to be fooling with the setting it all up right now. Might have to sacrifice the light.
Worry not, if I go to throw it I'll think of you.

did you get one yet...
vijay555 said:
Sounds like a hardware fault. Backup and then hard reset.
If you find it necessary to throw it at the wall, please throw it my way, I need to get hold of a Wizard to finish VJCandela!
V
Click to expand...
Click to collapse
i tried your v0.3 candela on my 8125 and no lightie.

you can get a trial version of SPB back up that will back up your phone, install that, back it up, then hard reset and run the back up to restore all the stuff on your phone.. no need to worry about setting it all up... however from what you described about the phone being off and the light coming on sounds like a hardware fault.. but a hard reset is worth a try

Disabling the annoying green-phone-light

Hi there y'all,
my xda neo / Prophet is always blinking green while he has got an telephone-connection with my provider and i hate that blinkin light, especially in my bedroom.
Has anyone got an idea how to disable this? Is there any possibility via Registry?
Thanks for any help!

a piece of black tape perhaps?

Try
HKLM\Drivers\BuiltIn\AllLEDMgr\Index
change the value to 0
__________________

I used LED Toggle which I attached. It works fine.
You do have to watch out though: disconnect your phone from power or your computer before you activate it. Using it once stops the light and using it again turns it back on.
It looks like the effect is gone after a softreset.
And another thing: some hours after using it my phone didn't respond at all for a few minutes. The only solution was a soft reset. This has happened several times now and when I keep the light on it seems to be working normal again. I don't know if it's just my Prophet but if you encounter the same problem we know where it's coming from.

Jayxz said:
I don't know if it's just my Prophet but if you encounter the same problem we know where it's coming from.
Click to expand...
Click to collapse
Thanks Jay, your little program works perfect. I'll see if i'll get the same problem and report it here
niketkumar, thanks for your help. I first try Jays Software, if i get the same problems i'll use your registry hack.
Thanks to both of you from my girlfriend, too - cause now it's less greener in our bedroom

So? Any news?
I stopped using the software and my phone hasn't crashed once. How's yours behaving?

Had the exact same problem, when using LED Toggle my device occasionally hangs. Since I stopped using it everything works just fine..

Man, that just sucks. I was so happy to be rid of that stupid light.
Now about that registry hack. I can find everything up to "\builtin" but the rest (AllLEDMgr\Index) doesn't exist. Do I have to create a new folder with an index file which has the value set to 0 or what?

Don't remember if I've tried the registry hack mentioned above, but I followed the thread about this issue in Modaco and tried numerous registry hacks before ending up with the only solution (that I'm aware of) that currently seems to work.
Which, unfortunately is the LED Toggle attached above, which in hand makes your device quite unstable..
So, back to the drawing board guys - hope someone finds a solution!

Just checked the corresponding thread on Modaco (http://www.modaco.com/index.php?showtopic=243948&st=0) and indeed this solution is not working flawlessly on our beloved Prophets..

Why not just place it face down on your dresser at night?

this has to be one of the dumbest hack request on the site!!! do as blunt man said and put it face down if it's that annoying!

gibster said:
this has to be one of the dumbest hack request on the site!!!
Click to expand...
Click to collapse
maybe you just don't understand it

gibster said:
this has to be one of the dumbest hack request on the site!!!
Click to expand...
Click to collapse
this has to be one of the dumbest comments i ever got in an professionals-board.
Jayxz, any of the workarounds i found generated problems so i just painted the light black. Not really the best solution but it sucked so badly

I find the green light annoying too, but i'd still like to have the orange warning when i received a msg or missed a call....
I hope that somebody could find a working solution for this

You can try the attached File i found at the MoDaCo Forum.
It works on my Prophet but some Users told that it drains the Battery
cu seneca

seneca said:
You can try the attached File i found at the MoDaCo Forum.
It works on my Prophet but some Users told that it drains the Battery
cu seneca
Click to expand...
Click to collapse
i tried this one but a taskmanager shows that ~10% cpu-usage is caused by this tool

enabling led blinking
Hi to All,
my HTC TYTN II always blinking green while he has got on phone-connection with my provider, and i love that. But now i have xperia and...no blinking on phone connection. It is possible to made it blinking when phone connection with provider is on

Questions and Answers Section for BA Forum. Post Your Questions Here.

@All,
As a celebration for my 1000th post, I decided to open a new thread based on Tweakman's idea, which seemed to work very well in the Development and Hacking Section. The idea is simple, a single thread for all Questions, Problems, and Concerns regarding Blue Angel. This includes, but it is not limited to:
[highlight]*Problems with Flashing.[/highlight]
Can't get your device in bootloader? Did it freeze during flashing and now it doesn't get past the 4 colored screen? Are you a complete noob and need some guidance as to how to flash? Etc.
[highlight]*Have questions about which Rom is best?[/highlight]
[highlight]*Want to install software but don't know if it is compatible with your BA[/highlight]
You get my point. All the questions that I have seen/answered over the past couple of months are just repetitions of posts, threads, and things that are readily available on the wiki or in other threads. However, people are either lazy, don't know what a Wiki is / where to find it, or just flat out don't know how to search (or read the forum rules for that matter). Having something general (in this case a sticky) that says "Hey, if you have a question, you can ask here" should draw enough attention and start minimizing the number of new threads and posts opened by users (both new and seasoned). This way, we will be able to keep the development threads a little cleaner and smaller... hence making the site's search function work a little better in the process.
@Seniors,
Kinda like the Q&A team, I will need your help in trying to keep the influx of questions to a certain level by answering them as we see them. None of us are logged in 24/7 (or at least some of us aren't ), but if you guys see a question, please try to answer it. I know that xplode, Chef_Tony, markanthonypr, red_hanks, sun_dream, imatrix, +Que_PPC, motisu, and others normally try to keep this under control, but if we centralize it and contain it, we will have a cleaner forum.

Reserved for future use.

Post Stickied Per Request...

Siemens SX66 BlueAngel Q&A, Help
You know very well you can count on us. Great idea mate. Also congrats on your 1,000's post. I've added a few "tags" to the thread. I hope some others do the same to. Tags help users to find what they are looking for when they use search.

hi
hi specialists
my friend has Blue Angel,he has strange problems.
in (sounds & notification),it didnot saved after changing any parameter,we tried by reflash the rom again,but nothing changed,also we reinstalled radio 1.15 but no change,also the ring tone of the msg is discontinue or irregular when played,and some times didnot wake up (of the device) when recieve a msg.
this is strange issued problems but in mine (BA) every thing is ok,this problems only in my friend (BA),I mate PDA2K.
any ideas?any suggestions?
thnx
notice:when we down grade to wm 6.1 every thing is ok

homam_france said:
hi specialists
my friend has Blue Angel,he has strange problems.
in (sounds & notification),it didnot saved after changing any parameter,we tried by reflash the rom again,but nothing changed,also we reinstalled radio 1.15 but no change,also the ring tone of the msg is discontinue or irregular when played,and some times didnot wake up (of the device) when recieve a msg.
this is strange issued problems but in mine (BA) every thing is ok,this problems only in my friend (BA),I mate PDA2K.
any ideas?any suggestions?
thnx
notice:when we down grade to wm 6.1 every thing is ok
Click to expand...
Click to collapse
Hey homam,
Thanks for kicking things off
First of all, which OS were you having problems with? This is important because it could have been a bug in a rom that could have been fixed in a later version.
@mark,
I know I can count on you, buddy I need help from the mods as well though. I cannot redirect posts to here and/or close threads

My BA, keeps turning on from standby, by a light shock! I maen, if you press the Power button, and then you knock gently on it's back, it turns back on!!
I've set to "Lock all buttons except the power button", However, I still have this issue.
Well, I must confess that once it dropped off of my hand, and it's the result of that...
Any ideas?

by "it turns back on" i assume you mean it wakes up from stand by, it doesn't really start like after a soft reset, right?
since the BA's only battery activated wake-up is in the cradle and we are not talking about soft reset, my first guess is, the battery is not to blame.
have you checked whether you can use your camera at all time? i mean, the camera_detect does not usually run at all times but if the camera connector is a little lose, from now and then it could "discover" the new camera hardware and wake up, that is unlikely for normal devices, but if yours had a crash before...
you could refer to this site for checking possible hardware reasons:
http://www.land-of-kain.de/ppc/mda3/disassembly/
the hardware things aside, there are also many possible software reasons for the device to wake up on:
- update of titanium weather
- automatic email checking
- cell broadcast
- if bluetooth is on
- if beam is on
- automatic update of any software...
plus of course the usual:
- incoming call
- incoming text message
- incoming mms
- upcoming calendar event...
so please check the possible software wake ups first to make sure this is really a hardware issue, because that would be a shame, that could be tricky to solve.
or let me put it this way, if it is really the moving that wakes it up, you have the first BA with accelerometer
EDIT: last but not least, it could only be a bug, maybe a hard reset or change of the rom could also be a way to go, since spontaneous waking up is a known bug for BAs
Chef_Tony

If there was only a way to hack the hardware and make this work at least on Edge. I can live with everything else, but its a shame paying for a full unlimited Internet service and only getting G connection Sighhhhhhh
Ok, I had to let that frustration out !!!!!!

Chef_Tony said:
by "it turns back on" i assume you mean it wakes up from stand by, it doesn't really start like after a soft reset, right?
since the BA's only battery activated wake-up is in the cradle and we are not talking about soft reset, my first guess is, the battery is not to blame.
have you checked whether you can use your camera at all time? i mean, the camera_detect does not usually run at all times but if the camera connector is a little lose, from now and then it could "discover" the new camera hardware and wake up, that is unlikely for normal devices, but if yours had a crash before...
you could refer to this site for checking possible hardware reasons:
http://www.land-of-kain.de/ppc/mda3/disassembly/
the hardware things aside, there are also many possible software reasons for the device to wake up on:
- update of titanium weather
- automatic email checking
- cell broadcast
- if bluetooth is on
- if beam is on
- automatic update of any software...
plus of course the usual:
- incoming call
- incoming text message
- incoming mms
- upcoming calendar event...
so please check the possible software wake ups first to make sure this is really a hardware issue, because that would be a shame, that could be tricky to solve.
or let me put it this way, if it is really the moving that wakes it up, you have the first BA with accelerometer
EDIT: last but not least, it could only be a bug, maybe a hard reset or change of the rom could also be a way to go, since spontaneous waking up is a known bug for BAs
Chef_Tony
Click to expand...
Click to collapse
Wow! Tony! I really appreciate your complete answer. I mean it.
Yes, as you correctly assumed, I meant wake-up. It just wakes up and continues the routine WinMo operation; no soft-reset occurs.
It's less than a year that I've replaced the battery with a new one. I remember all the funny things used to happen when the old battery was dying. But non of them were similar to this one.
It can't be the Camera. Well, I'm able to use it all the time, and the "camera_detect" has been always loaded in the processes whenever I've checked it. About the looseness thing, ummm, I'm not sure. I tried to knock on it to see if it's more sensitive than other parts. I think the upper part of the device is more likely to wake it up by an easy hit (like knocking). but it's the whole upper part, not only the camera section nor the camera button.
Unfortunately, the software possibility, is unlikely to be the problem:
I've used many ROMs on my lovely BA which 3-4 times of them taken place since the wake-up problem.
The software and the usual reasons you counted, do wake it up. but shakes, too.
Finally, to be honest, I'm agree with you! This is the first Blue Angel with accelerometer. yeaaah! I did it!
I bet my friends that I can wake my BA up, without touching any buttons or screen! It's fun this way, but I comes to be annoying when I put it in my pocket or just put it on a table! and it wakes up... consider the forced battery consumption, unwanted screen taps if I don't lock the screen. God bless A_C! and... .
I know it's a hardware issue (((((

@raizaM: My Thought.... Have you ever taken it apart? One of my BA's had 3 loose bolts inside. All 3 were from what I think is the Radio/Antenna part at top. However, in my case, I had a rattle going inside. Thats why I put it apart. You might have something loose inside, causing a connection to arc when you knock on your phone. If you do deside to open it, there is a tutorial on the wiki on how to.

markanthonypr said:
@raizaM: My Thought.... Have you ever taken it apart? One of my BA's had 3 loose bolts inside. All 3 were from what I think is the Radio/Antenna part at top. However, in my case, I had a rattle going inside. Thats why I put it apart. You might have something loose inside, causing a connection to arc when you knock on your phone. If you do deside to open it, there is a tutorial on the wiki on how to.
Click to expand...
Click to collapse
Hey mark!
I had that same issue a while back, but with only one screw (also from the same area as yours).
@raizaM
Just to knock off Chef_Tony's theory out of the table completely, try to erase camera_detect.lnk from \Windows\startup and SR your device. If Chef was right, then your issue might be gone. However, I would follow markanthony's advice and take it apart in case Chef's idea doesn't work.

Oh man, your not my hero anymore LoL.. and here I thought I would be the only one with a mechanic inside my phone.

markanthonypr said:
Oh man, your not my hero anymore LoL.. and here I thought I would be the only one with a mechanic inside my phone.
Click to expand...
Click to collapse
Well, it kept me entertained when my BA would run out of juice

Thanks for your kind advices.
Actually, I tried to remove "camrea_detect" from the startup once, but any way, I gave it a shot again... no success...
Frankly, I'm a lil bit afraid to take my lovely BA apart... :-s... What if... :-(
But, I guess sooner or later I need to do so. so what the heck... lets do it.
Maybe I'll do it tonight. Guys please help me through it. I don't wanna loose my Angel!
Ton'y link provided in the previous posts, would be my start:
http://www.land-of-kain.de/ppc/mda3/disassembly/
any more advices?

raizaM: You're not going to go that far deep. Only remove the cover. If you look at picture #4 on that link, the top green area has about 6 bolts all around it. Those were the ones that were loose on mine. 2 of them were rattling inside the phone. I still can't believe they didn't cause a short circuit. You don't need to go down into the camshell area. Do you use the sliding keyboard? If so, you could have a bad flex cable. But, don't worry about tha for now. Just remove back cover and carefull inspect for loose bolts. Don't over tighten them.

all the master please help, my BA strange,,,,, the screen suddenly go dead after actived wifi or playing game, its suddenly dead, and i must push power button to turn it on again through proses like softreset, that in battery power. but if i conect in charger power mode, i turn wifi,playing game, its normal, the BA still on and working normal,
please2,,,,,if someone knows the problem please help, im desper now....

loryshoe said:
all the master please help, my BA strange,,,,, the screen suddenly go dead after actived wifi or playing game, its suddenly dead, and i must push power button to turn it on again through proses like softreset, that in battery power. but if i conect in charger power mode, i turn wifi,playing game, its normal, the BA still on and working normal,
please2,,,,,if someone knows the problem please help, im desper now....
Click to expand...
Click to collapse
It seems that you have the backlight settings set to dim/turn off too fast. Go to \Settings\System\Backlight and modify the settings in there (particularly the ones labeled "On Battery Power"). Then, soft reset the device (stylus on the bottom).
Hope this helps.

markanthonypr said:
raizaM: You're not going to go that far deep. Only remove the cover. If you look at picture #4 on that link, the top green area has about 6 bolts all around it. Those were the ones that were loose on mine. 2 of them were rattling inside the phone. I still can't believe they didn't cause a short circuit. You don't need to go down into the camshell area. Do you use the sliding keyboard? If so, you could have a bad flex cable. But, don't worry about tha for now. Just remove back cover and carefull inspect for loose bolts. Don't over tighten them.
Click to expand...
Click to collapse
egzthunder1 said:
It seems that you have the backlight settings set to dim/turn off too fast. Go to \Settings\System\Backlight and modify the settings in there (particularly the ones labeled "On Battery Power"). Then, soft reset the device (stylus on the bottom).
Hope this helps.
Click to expand...
Click to collapse
not the setting, it got black scren, its dead screen after running wifi or application, suddenly goes dead, black screen,.

Have you tried with another battery? It sounds to me like your battery is about to die. It won't hold the heavy battery consumption of Wi-Fi and heavy CPU usage while on Games. Try with another battery. Also make sure you followed Egzthunders suggestion to change your Power Settings. If you still need help, post back and include more info about your device, such as, what version of Windows are you running and how old/new is your battery.

[TUT] How to start an Earthquake with your Touch Pro 2!

How to start a small Earthquake with your Touch Pro 2.
Step 1: Go to Settings, and set Phone to either Vibrate, Vibrate and Ring or Ring then Vibrate.
Step 2: Have someone call the same device that was set to vibrate and be prepared to hold on to something!
Yes. This was sarcasm Sorry if it wasn't your type of humor, but I just wanted to get across the fact that the vibration for the Touch Pro 2 (for Sprint at least) is insane. If my Ringer Volume isn't at it's max, the vibration will drown out the sound for the Ringer.
Also, if I'm in class (I'm a college student) and I have it set to vibrate, every single person in the class knows I have a call/text. A little ridiculous with the class is about 70 people.
I've posted a thread on PPC Geeks and people have similar problems, but no luck finding a fix and/or making a fix. Anyone here feel the same way?
Anyone know of a fix or can maybe experiment on a fix?
(Again, sorry if this wasn't funny, I thought I could add a little humor to the issue, lol)

thelovatscout said:
... if I'm in class (I'm a college student) and I have it set to vibrate, every single person in the class knows I have a call/text. A little ridiculous with the class is about 70 people ... Anyone know of a fix or can maybe experiment on a fix?
Click to expand...
Click to collapse
Here's the right fix: don't have your phone on during class -- listen to the prof instead (some humour and sarcasm back atcha).

I'm just going to assume there is no fix. lol

I seem to remember some time ago, when searching for Touch Pro (1) Tweaks, that there was a registry key that could be edited to change the vibration level. Who knows, it may still work. Though if you find it and you go that route, be sure to read all instructions. If it doesn't work, then you will either have to edit it back to the original, or delete the key (in the event that the key was not there). In extreme cases, you might have to do a factory reset, so backing up is reccomended (Microsoft Myphone is good for backing up nearly all unrecoverable things, like address book, pics, documents, texts, etc.
As I rarely have vibrate turned on, I haven't really run into this problem, yet. But this may be a solution worth looking into.

ThreeTima said:
I seem to remember some time ago, when searching for Touch Pro (1) Tweaks, that there was a registry key that could be edited to change the vibration level. Who knows, it may still work. Though if you find it and you go that route, be sure to read all instructions. If it doesn't work, then you will either have to edit it back to the original, or delete the key (in the event that the key was not there). In extreme cases, you might have to do a factory reset, so backing up is reccomended (Microsoft Myphone is good for backing up nearly all unrecoverable things, like address book, pics, documents, texts, etc.
As I rarely have vibrate turned on, I haven't really run into this problem, yet. But this may be a solution worth looking into.
Click to expand...
Click to collapse
If anyone could do that, it would be bloody effing awesome. I've been looking everyday, searching in threads for any fixes but nothing. I've tried myself a little bit but I'm not a...expert, lol at the whole registry things.

Ha! Same thing happens to me in class so I just set it on silent and deal with not being notified of anything. I've never had a phone vibration that actually startled me, but it happens.

There's a couple of registry fixes I've seen for this, it never really bothered me. I just open my phone up like a laptop and put it on silent when I'm at work.. if anything comes up it shows up on the screen.
I'm sorry I can't actually provide you with those registry fixes, you'll have to spend a night searching through the forums or google.
BUT http://www.freewarepocketpc.net/ppc-download-vibro.html
This program here might help change the vibrate pattern making it not as long of a vibrate cause I know my text messages do a solid vibrate for a good 2-3 seconds it feels like..
Hope this helps.
PS.. Why are you awake in class anyways, I slept through all of my classes.

DuMnUt101 said:
PS.. Why are you awake in class anyways, I slept through all of my classes.
Click to expand...
Click to collapse
lmao very good question. Maybe a very good answer is that the vibration wakes me up! lol

Solution: Silent :O

Don't forget this is a "business" phone and as such people like to pretend to be being considerate by switching their phone to vibrate but still want people in the room to know how important they are in that they are being contacted all through the meeting.
Sarcasm aside I would say the vibrate on mine (T-Mo TP2) is weak to say the least. Often don't notice its vibrating... So if you find a setting, I'd like to ramp mine up!

omganinja said:
Solution: Silent :O
Click to expand...
Click to collapse
Wow. You are a genius. Seriously.
Anyways, I suppose my sarcasm in the first post opened a door for a little less productive sarcasm. Anyways, I have still been searching and have found nothing.
It's interesting to know that the T-mo TP2 has a lower vibration! Very peculiar. I'll keep looking through my registry but so far I have come up dry.

thelovatscout said:
Wow. You are a genius. Seriously.
Anyways, I suppose my sarcasm in the first post opened a door for a little less productive sarcasm. Anyways, I have still been searching and have found nothing.
It's interesting to know that the T-mo TP2 has a lower vibration! Very peculiar. I'll keep looking through my registry but so far I have come up dry.
Click to expand...
Click to collapse
i have the TMo TP2 also and the vibration is rather strong.....no fix in sight....oh well .....just do like i do, put it in your pocket and enjoy!
lol....sorry sarcasm is addictive

thelovatscout said:
Wow. You are a genius. Seriously.
Anyways, I suppose my sarcasm in the first post opened a door for a little less productive sarcasm. Anyways, I have still been searching and have found nothing.
It's interesting to know that the T-mo TP2 has a lower vibration! Very peculiar. I'll keep looking through my registry but so far I have come up dry.
Click to expand...
Click to collapse
i have the TMo TP2 also and the vibration is rather strong.....no fix in sight....oh well .....just do like i do, put it in your pocket and enjoy!
lol....sorry, sarcasm is addictive

i think the vibration is strong for my tmo tp2. i work at wal mart part time and it gets very busy and loud. when i get a message the managers that are next to me can hear it vibrate through my pocket! so i've been leaving it on silent lately.

thelovatscout said:
Wow. You are a genius. Seriously.
Anyways, I suppose my sarcasm in the first post opened a door for a little less productive sarcasm. Anyways, I have still been searching and have found nothing.
It's interesting to know that the T-mo TP2 has a lower vibration! Very peculiar. I'll keep looking through my registry but so far I have come up dry.
Click to expand...
Click to collapse
Maybe there was sarcasm meant back, but not sure it should be classified as "a little less productive" as, seriously, why do you need the vibrate active in class anyway and can't just switch it to silent?

LOL...yea good sarcasim! I cant put my phone in vib during meetings either, just too loud. But I think it is the truth in most of the pda phones! Best way to deal with this is put in silent.

wow to think this is a problem is kinda funny. i totally understand how the loudness would be a problem for some but for the first time in a long time with a mobile phone i can have the device set on vibrate and actually know the device is vibrating. last time i could use effective vibration setting was back in the RIM 950/957 days maybe even older skytel pager days....
good luck in your search and if you find a way to make it even stronger send the info my way

Good Vibrations
skippyg4 said:
wow to think this is a problem is kinda funny. i totally understand how the loudness would be a problem for some but for the first time in a long time with a mobile phone i can have the device set on vibrate and actually know the device is vibrating. last time i could use effective vibration setting was back in the RIM 950/957 days maybe even older skytel pager days....
good luck in your search and if you find a way to make it even stronger send the info my way
Click to expand...
Click to collapse
Did anyone have success with the .cab?
I'm also seeking a way to immediately toggle to SILENT instead of VIBRATE using Rhodium Keyboard Controller - but to no avail. Help anyone?

Got a new Telus TP2 here, and I came across this thread looking for a way to BUMP UP the vibration. I've missed every call since I've got this phone because the vibrate is almost unnoticeable... compared to my titan which gave me a jolt when it vibrated.
Anyway, to be helpful, I am going to suggest you guys look into PhoneAlarm ( hxxp://www.pocketmax.net/phoneAlarm.html ) , which I used on my titan... I think it has settings to make the vibrate longer or shorter (Custom LED color / vibrate pattern per alarm ). I would have checked it before I posted, but it may be a while before I get around to playing with it. Good luck all.

For me it's always been more of a good thing than a bad thing.... Especially when I'm at the mall or somewhere loud and I'm moving. A weak vibration just isn't cutting it. So yeah, you should probably just go to silent mode if it's too strong for your liking. Not too hard to figure out.