Related
Is there a way to stop/disable the flashing lights, particularly the one on the right hand side of the unit?
...my wife hates them flashing and I cannot keep the device in the bedroom at night!!!
Easy one this to solve, move the wife out of the bedroom
I have been looking for a long time for registry hack or a button to disable her alltogether, or to the very least turn off the Voice/sound function, but to date I could not figure it out!!!
Is there anyone out there who can help. I am sure there are millions of men who would be willing to pay for the solution.
My god yes, im so glad im not the only one the wife goes mental with the falshing lights at night
Why not use an indellible marker to paint them out, or for a less "permanent" solution, use a couple of pieces of black insulation tape?
Cheers,
Steve.
put it in a thick winter sock to hide the flash?
Tweaks2k2 was always good at this, unfortunatly it doesn't support turning the LEDs off on the Universal yet.
I'm sure it will only be a matter of time though.
brnoblade said:
Easy one this to solve, move the wife out of the bedroom
Click to expand...
Click to collapse
By far the best solution. LOL
Ant
The wife cant moan at me as her phone is a samsung e720 which has a really strong blue screen glow.
Anyway if she does moan I wont let her use it in bed when she wants to check her ebay :wink:
Put it on charge, noticed last night that lights stop flashing and only orange charge light comes on and does not flash while on charge.
Regards
gooroo said:
Put it on charge, noticed last night that lights stop flashing and only orange charge light comes on and does not flash while on charge.
Regards
Click to expand...
Click to collapse
The bluetooth light still flashes though :wink:
Then disable bluetooth
"HKEY_LOCAL_MACHINE\Drivers\Builtin\AllLEDMgr" should be the control strings for the LEDs
Try to change something there
BalooDK is correct.
Whilst doing some research for VJElectrify yesterday, I came across this aswell.
I really don't recommend it, but navigate to
"HKEY_LOCAL_MACHINE\Drivers\Builtin\AllLEDMgr"
and rename the dll value "AllLEDMgr.dll" to "AllLEDMgr.dllVJ".
Ensure the value has been set and soft reset. Ta da! No leds.
However, highly unrecommended since you can't tell when bluetooth is on.
Obviously rename to original name to reverse this effect.
There are other less invasive ways to achieve this, but this seems to work well.
NOTE I strongly recommend you export this registry branch before modifying it. You can cause problems in this area of the registry by accident. It's also easier to just import back the old settings when the wife is out of sight!
V
I tried editing above registry value and the lights stoped.
But after a while ... The lights start flashing again ...
I really really don't understand how.
Then I tried to delete the whole "DLL" Value. After a soft reset, the lights where gone. But again back after a while ...
How is this possible. Does WM5.0 have ARR? (Automatic Registry Rebuilder
P.S. Where is the .dll in explorer? Not in my Windows or system dir.
Need to make VJSTFU-woman One day...
V
brnoblade said:
Is there anyone out there who can help. I am sure there are millions of men who would be willing to pay for the solution.
Click to expand...
Click to collapse
Hey!
me and vijay555 are trying to solve the wife problem very hard, for some time now...
It seems, that at first, the project should be renamed to "Kill wife" instead of "Kill lights".
There seems to be a solution for that...
buzz
Try applying the Gucci_HandBag_v0.5 patch. I find that it provides a temporary solution.
However, as Buzz says, we've found better results by twisting her display area back on itself a couple of times. Her buttons will seem to light up, but the rest of the unit will provide adequate functionality without the irrating bugs. Just don't forget to enable the HKLU > IHaveAnAlibi registry setting first :wink:
V
Hi there y'all,
my xda neo / Prophet is always blinking green while he has got an telephone-connection with my provider and i hate that blinkin light, especially in my bedroom.
Has anyone got an idea how to disable this? Is there any possibility via Registry?
Thanks for any help!
a piece of black tape perhaps?
Try
HKLM\Drivers\BuiltIn\AllLEDMgr\Index
change the value to 0
__________________
I used LED Toggle which I attached. It works fine.
You do have to watch out though: disconnect your phone from power or your computer before you activate it. Using it once stops the light and using it again turns it back on.
It looks like the effect is gone after a softreset.
And another thing: some hours after using it my phone didn't respond at all for a few minutes. The only solution was a soft reset. This has happened several times now and when I keep the light on it seems to be working normal again. I don't know if it's just my Prophet but if you encounter the same problem we know where it's coming from.
Jayxz said:
I don't know if it's just my Prophet but if you encounter the same problem we know where it's coming from.
Click to expand...
Click to collapse
Thanks Jay, your little program works perfect. I'll see if i'll get the same problem and report it here
niketkumar, thanks for your help. I first try Jays Software, if i get the same problems i'll use your registry hack.
Thanks to both of you from my girlfriend, too - cause now it's less greener in our bedroom
So? Any news?
I stopped using the software and my phone hasn't crashed once. How's yours behaving?
Had the exact same problem, when using LED Toggle my device occasionally hangs. Since I stopped using it everything works just fine..
Man, that just sucks. I was so happy to be rid of that stupid light.
Now about that registry hack. I can find everything up to "\builtin" but the rest (AllLEDMgr\Index) doesn't exist. Do I have to create a new folder with an index file which has the value set to 0 or what?
Don't remember if I've tried the registry hack mentioned above, but I followed the thread about this issue in Modaco and tried numerous registry hacks before ending up with the only solution (that I'm aware of) that currently seems to work.
Which, unfortunately is the LED Toggle attached above, which in hand makes your device quite unstable..
So, back to the drawing board guys - hope someone finds a solution!
Just checked the corresponding thread on Modaco (http://www.modaco.com/index.php?showtopic=243948&st=0) and indeed this solution is not working flawlessly on our beloved Prophets..
Why not just place it face down on your dresser at night?
this has to be one of the dumbest hack request on the site!!! do as blunt man said and put it face down if it's that annoying!
gibster said:
this has to be one of the dumbest hack request on the site!!!
Click to expand...
Click to collapse
maybe you just don't understand it
gibster said:
this has to be one of the dumbest hack request on the site!!!
Click to expand...
Click to collapse
this has to be one of the dumbest comments i ever got in an professionals-board.
Jayxz, any of the workarounds i found generated problems so i just painted the light black. Not really the best solution but it sucked so badly
I find the green light annoying too, but i'd still like to have the orange warning when i received a msg or missed a call....
I hope that somebody could find a working solution for this
You can try the attached File i found at the MoDaCo Forum.
It works on my Prophet but some Users told that it drains the Battery
cu seneca
seneca said:
You can try the attached File i found at the MoDaCo Forum.
It works on my Prophet but some Users told that it drains the Battery
cu seneca
Click to expand...
Click to collapse
i tried this one but a taskmanager shows that ~10% cpu-usage is caused by this tool
enabling led blinking
Hi to All,
my HTC TYTN II always blinking green while he has got on phone-connection with my provider, and i love that. But now i have xperia and...no blinking on phone connection. It is possible to made it blinking when phone connection with provider is on
Hi y'all,
since a few days I'm the owner of a Qtek S100. The previous owner bought it a year and a half ago and has never updated anything on it.
The ROM is version1.06. (Radio is version 1.05). I've tried to register on qtek.nl to get the latest updates but you have to enter an IMEI-nr during the registration and since my device is from Belgium as is my IMEI, I can't register!
I see that there are different kinds of ROMs circulating so my question is; Which one do I need/ is the best?
Should I install rom and radio apart or does rom contain also radio?
I've heared about a special rom-pack that also has the big storage hack in it. What about this?
Do I also have to install the camera patch? Where can I find it?
I've also heared about a A2DP bluetooth patch..
The sticky about upgrading is kinda outdated and didn't help me much..
---------------------------------------------------------------------------------------
Aside from this I have some other problems I've encountered. I don't know if they'll be fixed after I update the ROM but here they are;
- how do I lock the buttons/screen? The only thing that seems to work but isn't very convenient is to enable a the password in the settings and check the box next to "prompt if device is unused 1 minute". No plain button/screen lock?
- If the device is on stand-by I don't get any notification that I've received an sms. Only when I disable the stand-by by pushing the power button then I get it. But this could be like half an hour after I've received a message.
- if someone calls me and I end the call, how can I save his/her number to my phonebook?
- If I take of the batterycover the device shuts down. Is this supposed to happen?
-How do you completely shut the device down? If I press and hold the powerbutton (like described in the manual) the backlight dims, if I press it shortly it goes on stand-by.. but how do I turn the device of (without taking of the battery-cover..)
- Is it normal that when my battery is low (10-15%) the bluetooth doesn't work?
- Which 4GB SD-cards are known to work 100% with the Qtek S100?
- I've noticed that the battery is kinda weak/worn out? Where can I find a replacement with a higher capacity?
Maybe I should also say that this is the first time I work with Windows Mobile so don't be too harsh on me
Thanks for helping out!
Anyone?
debilio said:
Hi y'all,
I see that there are different kinds of ROMs circulating so my question is; Which one do I need/ is the best?
Should I install rom and radio apart or does rom contain also radio?
Do I also have to install the camera patch? Where can I find it?
I've also heared about a A2DP bluetooth patch..
- how do I lock the buttons/screen? The only thing that seems to work but isn't very convenient is to enable a the password in the settings and check the box next to "prompt if device is unused 1 minute". No plain button/screen lock?
- If the device is on stand-by I don't get any notification that I've received an sms. Only when I disable the stand-by by pushing the power button then I get it. But this could be like half an hour after I've received a message.
- if someone calls me and I end the call, how can I save his/her number to my phonebook?
-How do you completely shut the device down? If I press and hold the powerbutton (like described in the manual) the backlight dims, if I press it shortly it goes on stand-by.. but how do I turn the device of (without taking of the battery-cover..)
- Is it normal that when my battery is low (10-15%) the bluetooth doesn't work?
- Which 4GB SD-cards are known to work 100% with the Qtek S100?
Click to expand...
Click to collapse
Okay, I'll make a start with what I know off the top of my head but would recommend a bit of reading here and on MoDaCo.com as all the answers not too difficult to find.
I'm using iMate 1.12 ROM which is the best from that source. I've not tried any other operator/manufacturer versions so can't comment. The radio version will be included and the camera patch is not needed with the latest updates. A2DP patch is here :
http://forum.xda-developers.com/showthread.php?t=249219
I recommend pocketMax's screenGuard and phoneAlarm for locking & notifications respectively :
http://www.pocketmax.net/index.html
With the Dialpad on the screen, go to Call History. Press and hold on the number you want to save, first option is Save To Contacts.
Pocket PCs until very recently were designed to never be completely shut down. This is why we have a backup battery. Make sure that you pull the little rubber lug away from the battery before you remove it as you can initiate a hard reset otherwise. This is in the manual.
Bluetooth can be a battery-drainer so I'm not surprised it won't work with that level of juice. I'd try and avoid letting the battery level get that low if possible as the backup only lasts for about 20 minutes. After that you will lose all your data etc.
I use a MobyMemory own-brand 4GB mini-SD in an adaptor. I have had a couple of problems with it but generally it works fine. Today screen plugins installed on the card can be slow to load.
http://www.mobymemory.com/
I'm sure other members here will correct me if there are better answers and fill in the gaps otherwise.
please do search and few readings on this forum... and hmmm i saw some anwers that actually u can get from your xda manual book
happy reading...
@All,
As a celebration for my 1000th post, I decided to open a new thread based on Tweakman's idea, which seemed to work very well in the Development and Hacking Section. The idea is simple, a single thread for all Questions, Problems, and Concerns regarding Blue Angel. This includes, but it is not limited to:
[highlight]*Problems with Flashing.[/highlight]
Can't get your device in bootloader? Did it freeze during flashing and now it doesn't get past the 4 colored screen? Are you a complete noob and need some guidance as to how to flash? Etc.
[highlight]*Have questions about which Rom is best?[/highlight]
[highlight]*Want to install software but don't know if it is compatible with your BA[/highlight]
You get my point. All the questions that I have seen/answered over the past couple of months are just repetitions of posts, threads, and things that are readily available on the wiki or in other threads. However, people are either lazy, don't know what a Wiki is / where to find it, or just flat out don't know how to search (or read the forum rules for that matter). Having something general (in this case a sticky) that says "Hey, if you have a question, you can ask here" should draw enough attention and start minimizing the number of new threads and posts opened by users (both new and seasoned). This way, we will be able to keep the development threads a little cleaner and smaller... hence making the site's search function work a little better in the process.
@Seniors,
Kinda like the Q&A team, I will need your help in trying to keep the influx of questions to a certain level by answering them as we see them. None of us are logged in 24/7 (or at least some of us aren't ), but if you guys see a question, please try to answer it. I know that xplode, Chef_Tony, markanthonypr, red_hanks, sun_dream, imatrix, +Que_PPC, motisu, and others normally try to keep this under control, but if we centralize it and contain it, we will have a cleaner forum.
Reserved for future use.
Post Stickied Per Request...
Siemens SX66 BlueAngel Q&A, Help
You know very well you can count on us. Great idea mate. Also congrats on your 1,000's post. I've added a few "tags" to the thread. I hope some others do the same to. Tags help users to find what they are looking for when they use search.
hi
hi specialists
my friend has Blue Angel,he has strange problems.
in (sounds & notification),it didnot saved after changing any parameter,we tried by reflash the rom again,but nothing changed,also we reinstalled radio 1.15 but no change,also the ring tone of the msg is discontinue or irregular when played,and some times didnot wake up (of the device) when recieve a msg.
this is strange issued problems but in mine (BA) every thing is ok,this problems only in my friend (BA),I mate PDA2K.
any ideas?any suggestions?
thnx
notice:when we down grade to wm 6.1 every thing is ok
homam_france said:
hi specialists
my friend has Blue Angel,he has strange problems.
in (sounds & notification),it didnot saved after changing any parameter,we tried by reflash the rom again,but nothing changed,also we reinstalled radio 1.15 but no change,also the ring tone of the msg is discontinue or irregular when played,and some times didnot wake up (of the device) when recieve a msg.
this is strange issued problems but in mine (BA) every thing is ok,this problems only in my friend (BA),I mate PDA2K.
any ideas?any suggestions?
thnx
notice:when we down grade to wm 6.1 every thing is ok
Click to expand...
Click to collapse
Hey homam,
Thanks for kicking things off
First of all, which OS were you having problems with? This is important because it could have been a bug in a rom that could have been fixed in a later version.
@mark,
I know I can count on you, buddy I need help from the mods as well though. I cannot redirect posts to here and/or close threads
My BA, keeps turning on from standby, by a light shock! I maen, if you press the Power button, and then you knock gently on it's back, it turns back on!!
I've set to "Lock all buttons except the power button", However, I still have this issue.
Well, I must confess that once it dropped off of my hand, and it's the result of that...
Any ideas?
by "it turns back on" i assume you mean it wakes up from stand by, it doesn't really start like after a soft reset, right?
since the BA's only battery activated wake-up is in the cradle and we are not talking about soft reset, my first guess is, the battery is not to blame.
have you checked whether you can use your camera at all time? i mean, the camera_detect does not usually run at all times but if the camera connector is a little lose, from now and then it could "discover" the new camera hardware and wake up, that is unlikely for normal devices, but if yours had a crash before...
you could refer to this site for checking possible hardware reasons:
http://www.land-of-kain.de/ppc/mda3/disassembly/
the hardware things aside, there are also many possible software reasons for the device to wake up on:
- update of titanium weather
- automatic email checking
- cell broadcast
- if bluetooth is on
- if beam is on
- automatic update of any software...
plus of course the usual:
- incoming call
- incoming text message
- incoming mms
- upcoming calendar event...
so please check the possible software wake ups first to make sure this is really a hardware issue, because that would be a shame, that could be tricky to solve.
or let me put it this way, if it is really the moving that wakes it up, you have the first BA with accelerometer
EDIT: last but not least, it could only be a bug, maybe a hard reset or change of the rom could also be a way to go, since spontaneous waking up is a known bug for BAs
Chef_Tony
If there was only a way to hack the hardware and make this work at least on Edge. I can live with everything else, but its a shame paying for a full unlimited Internet service and only getting G connection Sighhhhhhh
Ok, I had to let that frustration out !!!!!!
Chef_Tony said:
by "it turns back on" i assume you mean it wakes up from stand by, it doesn't really start like after a soft reset, right?
since the BA's only battery activated wake-up is in the cradle and we are not talking about soft reset, my first guess is, the battery is not to blame.
have you checked whether you can use your camera at all time? i mean, the camera_detect does not usually run at all times but if the camera connector is a little lose, from now and then it could "discover" the new camera hardware and wake up, that is unlikely for normal devices, but if yours had a crash before...
you could refer to this site for checking possible hardware reasons:
http://www.land-of-kain.de/ppc/mda3/disassembly/
the hardware things aside, there are also many possible software reasons for the device to wake up on:
- update of titanium weather
- automatic email checking
- cell broadcast
- if bluetooth is on
- if beam is on
- automatic update of any software...
plus of course the usual:
- incoming call
- incoming text message
- incoming mms
- upcoming calendar event...
so please check the possible software wake ups first to make sure this is really a hardware issue, because that would be a shame, that could be tricky to solve.
or let me put it this way, if it is really the moving that wakes it up, you have the first BA with accelerometer
EDIT: last but not least, it could only be a bug, maybe a hard reset or change of the rom could also be a way to go, since spontaneous waking up is a known bug for BAs
Chef_Tony
Click to expand...
Click to collapse
Wow! Tony! I really appreciate your complete answer. I mean it.
Yes, as you correctly assumed, I meant wake-up. It just wakes up and continues the routine WinMo operation; no soft-reset occurs.
It's less than a year that I've replaced the battery with a new one. I remember all the funny things used to happen when the old battery was dying. But non of them were similar to this one.
It can't be the Camera. Well, I'm able to use it all the time, and the "camera_detect" has been always loaded in the processes whenever I've checked it. About the looseness thing, ummm, I'm not sure. I tried to knock on it to see if it's more sensitive than other parts. I think the upper part of the device is more likely to wake it up by an easy hit (like knocking). but it's the whole upper part, not only the camera section nor the camera button.
Unfortunately, the software possibility, is unlikely to be the problem:
I've used many ROMs on my lovely BA which 3-4 times of them taken place since the wake-up problem.
The software and the usual reasons you counted, do wake it up. but shakes, too.
Finally, to be honest, I'm agree with you! This is the first Blue Angel with accelerometer. yeaaah! I did it!
I bet my friends that I can wake my BA up, without touching any buttons or screen! It's fun this way, but I comes to be annoying when I put it in my pocket or just put it on a table! and it wakes up... consider the forced battery consumption, unwanted screen taps if I don't lock the screen. God bless A_C! and... .
I know it's a hardware issue (((((
@raizaM: My Thought.... Have you ever taken it apart? One of my BA's had 3 loose bolts inside. All 3 were from what I think is the Radio/Antenna part at top. However, in my case, I had a rattle going inside. Thats why I put it apart. You might have something loose inside, causing a connection to arc when you knock on your phone. If you do deside to open it, there is a tutorial on the wiki on how to.
markanthonypr said:
@raizaM: My Thought.... Have you ever taken it apart? One of my BA's had 3 loose bolts inside. All 3 were from what I think is the Radio/Antenna part at top. However, in my case, I had a rattle going inside. Thats why I put it apart. You might have something loose inside, causing a connection to arc when you knock on your phone. If you do deside to open it, there is a tutorial on the wiki on how to.
Click to expand...
Click to collapse
Hey mark!
I had that same issue a while back, but with only one screw (also from the same area as yours).
@raizaM
Just to knock off Chef_Tony's theory out of the table completely, try to erase camera_detect.lnk from \Windows\startup and SR your device. If Chef was right, then your issue might be gone. However, I would follow markanthony's advice and take it apart in case Chef's idea doesn't work.
Oh man, your not my hero anymore LoL.. and here I thought I would be the only one with a mechanic inside my phone.
markanthonypr said:
Oh man, your not my hero anymore LoL.. and here I thought I would be the only one with a mechanic inside my phone.
Click to expand...
Click to collapse
Well, it kept me entertained when my BA would run out of juice
Thanks for your kind advices.
Actually, I tried to remove "camrea_detect" from the startup once, but any way, I gave it a shot again... no success...
Frankly, I'm a lil bit afraid to take my lovely BA apart... :-s... What if... :-(
But, I guess sooner or later I need to do so. so what the heck... lets do it.
Maybe I'll do it tonight. Guys please help me through it. I don't wanna loose my Angel!
Ton'y link provided in the previous posts, would be my start:
http://www.land-of-kain.de/ppc/mda3/disassembly/
any more advices?
raizaM: You're not going to go that far deep. Only remove the cover. If you look at picture #4 on that link, the top green area has about 6 bolts all around it. Those were the ones that were loose on mine. 2 of them were rattling inside the phone. I still can't believe they didn't cause a short circuit. You don't need to go down into the camshell area. Do you use the sliding keyboard? If so, you could have a bad flex cable. But, don't worry about tha for now. Just remove back cover and carefull inspect for loose bolts. Don't over tighten them.
all the master please help, my BA strange,,,,, the screen suddenly go dead after actived wifi or playing game, its suddenly dead, and i must push power button to turn it on again through proses like softreset, that in battery power. but if i conect in charger power mode, i turn wifi,playing game, its normal, the BA still on and working normal,
please2,,,,,if someone knows the problem please help, im desper now....
loryshoe said:
all the master please help, my BA strange,,,,, the screen suddenly go dead after actived wifi or playing game, its suddenly dead, and i must push power button to turn it on again through proses like softreset, that in battery power. but if i conect in charger power mode, i turn wifi,playing game, its normal, the BA still on and working normal,
please2,,,,,if someone knows the problem please help, im desper now....
Click to expand...
Click to collapse
It seems that you have the backlight settings set to dim/turn off too fast. Go to \Settings\System\Backlight and modify the settings in there (particularly the ones labeled "On Battery Power"). Then, soft reset the device (stylus on the bottom).
Hope this helps.
markanthonypr said:
raizaM: You're not going to go that far deep. Only remove the cover. If you look at picture #4 on that link, the top green area has about 6 bolts all around it. Those were the ones that were loose on mine. 2 of them were rattling inside the phone. I still can't believe they didn't cause a short circuit. You don't need to go down into the camshell area. Do you use the sliding keyboard? If so, you could have a bad flex cable. But, don't worry about tha for now. Just remove back cover and carefull inspect for loose bolts. Don't over tighten them.
Click to expand...
Click to collapse
egzthunder1 said:
It seems that you have the backlight settings set to dim/turn off too fast. Go to \Settings\System\Backlight and modify the settings in there (particularly the ones labeled "On Battery Power"). Then, soft reset the device (stylus on the bottom).
Hope this helps.
Click to expand...
Click to collapse
not the setting, it got black scren, its dead screen after running wifi or application, suddenly goes dead, black screen,.
Have you tried with another battery? It sounds to me like your battery is about to die. It won't hold the heavy battery consumption of Wi-Fi and heavy CPU usage while on Games. Try with another battery. Also make sure you followed Egzthunders suggestion to change your Power Settings. If you still need help, post back and include more info about your device, such as, what version of Windows are you running and how old/new is your battery.
How to start a small Earthquake with your Touch Pro 2.
Step 1: Go to Settings, and set Phone to either Vibrate, Vibrate and Ring or Ring then Vibrate.
Step 2: Have someone call the same device that was set to vibrate and be prepared to hold on to something!
Yes. This was sarcasm Sorry if it wasn't your type of humor, but I just wanted to get across the fact that the vibration for the Touch Pro 2 (for Sprint at least) is insane. If my Ringer Volume isn't at it's max, the vibration will drown out the sound for the Ringer.
Also, if I'm in class (I'm a college student) and I have it set to vibrate, every single person in the class knows I have a call/text. A little ridiculous with the class is about 70 people.
I've posted a thread on PPC Geeks and people have similar problems, but no luck finding a fix and/or making a fix. Anyone here feel the same way?
Anyone know of a fix or can maybe experiment on a fix?
(Again, sorry if this wasn't funny, I thought I could add a little humor to the issue, lol)
thelovatscout said:
... if I'm in class (I'm a college student) and I have it set to vibrate, every single person in the class knows I have a call/text. A little ridiculous with the class is about 70 people ... Anyone know of a fix or can maybe experiment on a fix?
Click to expand...
Click to collapse
Here's the right fix: don't have your phone on during class -- listen to the prof instead (some humour and sarcasm back atcha).
I'm just going to assume there is no fix. lol
I seem to remember some time ago, when searching for Touch Pro (1) Tweaks, that there was a registry key that could be edited to change the vibration level. Who knows, it may still work. Though if you find it and you go that route, be sure to read all instructions. If it doesn't work, then you will either have to edit it back to the original, or delete the key (in the event that the key was not there). In extreme cases, you might have to do a factory reset, so backing up is reccomended (Microsoft Myphone is good for backing up nearly all unrecoverable things, like address book, pics, documents, texts, etc.
As I rarely have vibrate turned on, I haven't really run into this problem, yet. But this may be a solution worth looking into.
ThreeTima said:
I seem to remember some time ago, when searching for Touch Pro (1) Tweaks, that there was a registry key that could be edited to change the vibration level. Who knows, it may still work. Though if you find it and you go that route, be sure to read all instructions. If it doesn't work, then you will either have to edit it back to the original, or delete the key (in the event that the key was not there). In extreme cases, you might have to do a factory reset, so backing up is reccomended (Microsoft Myphone is good for backing up nearly all unrecoverable things, like address book, pics, documents, texts, etc.
As I rarely have vibrate turned on, I haven't really run into this problem, yet. But this may be a solution worth looking into.
Click to expand...
Click to collapse
If anyone could do that, it would be bloody effing awesome. I've been looking everyday, searching in threads for any fixes but nothing. I've tried myself a little bit but I'm not a...expert, lol at the whole registry things.
Ha! Same thing happens to me in class so I just set it on silent and deal with not being notified of anything. I've never had a phone vibration that actually startled me, but it happens.
There's a couple of registry fixes I've seen for this, it never really bothered me. I just open my phone up like a laptop and put it on silent when I'm at work.. if anything comes up it shows up on the screen.
I'm sorry I can't actually provide you with those registry fixes, you'll have to spend a night searching through the forums or google.
BUT http://www.freewarepocketpc.net/ppc-download-vibro.html
This program here might help change the vibrate pattern making it not as long of a vibrate cause I know my text messages do a solid vibrate for a good 2-3 seconds it feels like..
Hope this helps.
PS.. Why are you awake in class anyways, I slept through all of my classes.
DuMnUt101 said:
PS.. Why are you awake in class anyways, I slept through all of my classes.
Click to expand...
Click to collapse
lmao very good question. Maybe a very good answer is that the vibration wakes me up! lol
Solution: Silent :O
Don't forget this is a "business" phone and as such people like to pretend to be being considerate by switching their phone to vibrate but still want people in the room to know how important they are in that they are being contacted all through the meeting.
Sarcasm aside I would say the vibrate on mine (T-Mo TP2) is weak to say the least. Often don't notice its vibrating... So if you find a setting, I'd like to ramp mine up!
omganinja said:
Solution: Silent :O
Click to expand...
Click to collapse
Wow. You are a genius. Seriously.
Anyways, I suppose my sarcasm in the first post opened a door for a little less productive sarcasm. Anyways, I have still been searching and have found nothing.
It's interesting to know that the T-mo TP2 has a lower vibration! Very peculiar. I'll keep looking through my registry but so far I have come up dry.
thelovatscout said:
Wow. You are a genius. Seriously.
Anyways, I suppose my sarcasm in the first post opened a door for a little less productive sarcasm. Anyways, I have still been searching and have found nothing.
It's interesting to know that the T-mo TP2 has a lower vibration! Very peculiar. I'll keep looking through my registry but so far I have come up dry.
Click to expand...
Click to collapse
i have the TMo TP2 also and the vibration is rather strong.....no fix in sight....oh well .....just do like i do, put it in your pocket and enjoy!
lol....sorry sarcasm is addictive
thelovatscout said:
Wow. You are a genius. Seriously.
Anyways, I suppose my sarcasm in the first post opened a door for a little less productive sarcasm. Anyways, I have still been searching and have found nothing.
It's interesting to know that the T-mo TP2 has a lower vibration! Very peculiar. I'll keep looking through my registry but so far I have come up dry.
Click to expand...
Click to collapse
i have the TMo TP2 also and the vibration is rather strong.....no fix in sight....oh well .....just do like i do, put it in your pocket and enjoy!
lol....sorry, sarcasm is addictive
i think the vibration is strong for my tmo tp2. i work at wal mart part time and it gets very busy and loud. when i get a message the managers that are next to me can hear it vibrate through my pocket! so i've been leaving it on silent lately.
thelovatscout said:
Wow. You are a genius. Seriously.
Anyways, I suppose my sarcasm in the first post opened a door for a little less productive sarcasm. Anyways, I have still been searching and have found nothing.
It's interesting to know that the T-mo TP2 has a lower vibration! Very peculiar. I'll keep looking through my registry but so far I have come up dry.
Click to expand...
Click to collapse
Maybe there was sarcasm meant back, but not sure it should be classified as "a little less productive" as, seriously, why do you need the vibrate active in class anyway and can't just switch it to silent?
LOL...yea good sarcasim! I cant put my phone in vib during meetings either, just too loud. But I think it is the truth in most of the pda phones! Best way to deal with this is put in silent.
wow to think this is a problem is kinda funny. i totally understand how the loudness would be a problem for some but for the first time in a long time with a mobile phone i can have the device set on vibrate and actually know the device is vibrating. last time i could use effective vibration setting was back in the RIM 950/957 days maybe even older skytel pager days....
good luck in your search and if you find a way to make it even stronger send the info my way
Good Vibrations
skippyg4 said:
wow to think this is a problem is kinda funny. i totally understand how the loudness would be a problem for some but for the first time in a long time with a mobile phone i can have the device set on vibrate and actually know the device is vibrating. last time i could use effective vibration setting was back in the RIM 950/957 days maybe even older skytel pager days....
good luck in your search and if you find a way to make it even stronger send the info my way
Click to expand...
Click to collapse
Did anyone have success with the .cab?
I'm also seeking a way to immediately toggle to SILENT instead of VIBRATE using Rhodium Keyboard Controller - but to no avail. Help anyone?
Got a new Telus TP2 here, and I came across this thread looking for a way to BUMP UP the vibration. I've missed every call since I've got this phone because the vibrate is almost unnoticeable... compared to my titan which gave me a jolt when it vibrated.
Anyway, to be helpful, I am going to suggest you guys look into PhoneAlarm ( hxxp://www.pocketmax.net/phoneAlarm.html ) , which I used on my titan... I think it has settings to make the vibrate longer or shorter (Custom LED color / vibrate pattern per alarm ). I would have checked it before I posted, but it may be a while before I get around to playing with it. Good luck all.
For me it's always been more of a good thing than a bad thing.... Especially when I'm at the mall or somewhere loud and I'm moving. A weak vibration just isn't cutting it. So yeah, you should probably just go to silent mode if it's too strong for your liking. Not too hard to figure out.