Qtek 9000 - Music via BT - JASJAR, XDA Exec, MDA Pro General

Hi Friends,
I have an MDA pro with Qtek 9000 ROM (1.30.77 WWE). I would like to hear music over my BT headset (HBH-608). I found some hack is available. I tried with "vjvolubilis" but it doesn't work.
May be I missed something. Any idea about how to get it working?
Thanx and regards,
Ranju

...try these threads...
http://forum.xda-developers.com/viewtopic.php?p=340573
http://forum.xda-developers.com/viewtopic.php?p=340489

My HBH-608 has only handsfree profile. A2DP will not work for me. Actually I was looking for some hack (if already made by one of our friends) to send all the sound to handsfree.
I found one thing is that, audio goes to the handsfree (headset) everytime I start the "sdialer.exe". :idea:
But it's back to the internal speaker after the application is exited. I think this is matter of some registry hack.

Related

New A2DP Discovery

Hi Guys,
I wanna share something i found out a while ago.
I am currently holding on to a Motorola HT820 and a BlueAngel and i was kinda playing around with it wondering why i cannot answer phone calls and only can play my MP3's. Here is the solution.
Install the A2DP Profile
Soft Reset
Pair it up to your BT Stereo headset using high quality audio
now, upgrade to build 3900.
Run the restartradio.exe
run the bt upgrade cab file
run the restartradio.exe
Now, pair it up to bluetooth handsfree headset.
This works wonders. It seems to work best on WMP10. I have tried
Mortplayer but, after i answer calls, it stops playing and does not resume.
For WMP10, it resumes fine. I have only tested on BlueAngel and HT820.
I dont have the luxury to get my hands on other devices as yet.
BT upgrade files found here
http://wiki.xda-developers.com/index.php?pagename=BA_Bluetooth_1.0.0.3900_Upgrade
A2DP details found
http://forum.xda-developers.com/viewtopic.php?t=25443
ENJOY !!!!
this currently works best on WMP 10
You can continue listening to music after your call ends with mortplayer,
you have to disconnect the pairing and re-pair again..
XDAII and Motorola HT820
Hey guys,
I'm contemplating buying a Motorola HT820 but I'm concerned that it might not work with my phone - I have an XDAII with WM2005 1.60A installed. anyone know anything?
Thanks and best regards...
Hi
This sounds like what I've been waiting for too.....
I have an XDA II running 2003SE will this work with this combo any ideas?
Good one... will try it later
Has anyone tried with Motorola HS 850???
Has anyone tried with Motorola HS 850???
So far, i have not tried it on XDAII... but i think it should work..
Can anyone confirm if this is possiable with an XDA II as having read through numerious threads on the subject of Bluetooth implementation with various Wicomm configurations, but cannot clearly identify that the A2DP Protocol can be successfully made to work on an XDA II.
I suspect that this can only operate on an XDA IIi or XDA IIs. My requirement is to get a set of Motorola HT820 Bluetooth Stereo Headphones to function with my XDA II via Bluetooth, I am not really worried about the Phone Headset function I would just like to hear Audio via Media Player 10.
Thanks
I have just upgraded to 1.40 ROM (iMate) with Orange EXT ROM on M2000. I have radio 1.13 and the A2DP profile loaded.
Everything was working fine with the old ROM and wmp9, but wmp10 does not respond to the pause, back and forward buttons on the ht820.
Does anyone have this working on ht820? Is there a known work around?
Motorola BT820 Audio Gateway and a player
I've followed the steps above and now have the two new profiles and have managed to pair my Motorola BT820's without any problems.
I've read that this works best with WMP10 but since I don't have this I decided to try Mortplayer.
Silly question : How do I get my XDAIIs to send the audio to the headphones ? Their is an outgoing connection between the two but the sound still comes out of the speaker on the XDAIIs.
If a phone call comes in then this is directed up to the BT820's
Help
Jason
i have done over 50 hard resets.. many tries and it seems to be an intermittend prob.
@woodrjh
In this way a HP Bluetooth Headphones and a Motorola HT820 works with my xda IIi in a2dp mode incl. the Buttons in WMP10.
1. remove the RunBT file from the Autostart dir -> softreset
2. Install the PDA2K_BroadcomCorp_BTUpdate.cab -> softreset
http://h18007.www1.hp.com/support/files/handheldiPAQ/us/download/22475.html
3. Install the HP iPAQ Bluetooth Stereo Headphones Driver Update -> softreset
http://h18007.www1.hp.com/support/files/handheldiPAQ/us/download/22475.html
If the error \windows\btceavif.dll in use come, rename it with Resco File Editor and try again the driver update.
4. Put the the RunBT file back to the Autostart.
cu bülo
does this method enable your bluetooth headset to receive calls?

o2 mini new bluetooth stack (AKA bluetooth stock).

hi guys, i know all of you want more bt stack rather than ms bt stack. now i found new bluetooth stock for dopod 818(o2 mini).
this is support your o2 mini support stereo bluetooth headset, but make should your bt headset supports. and there is also file transfer stock......and other thing, but stereo bluetooth function need to be improving.
attention: backup you system first.
i learn a lot in this forum, so i want to share this stock for all of you. this stock is i find from somewhere, so i can not fix any bug. anyway just enjoy....
First post and delivering such a revolution? Makes me nervous...
Chatty said:
First post and delivering such a revolution? Makes me nervous...
Click to expand...
Click to collapse
HAHA, I KNOW. BUT YOU CAN TRY, PLEASE FIND ATTACHED PHOTO. THIS DRIVER COME FROM ONE BLUETOOTH HANDSET.
Could this be? Can anyone verify?
Handsfree versus headset
Hi,
I tried and first thing, everything work now as fine as before so a first good point.
Second one problem : my Bluespoon AX is only recognize as a Hands-free and you can only set "Audio redirection" for Headset.
Perhaps some registry work ?
I will continue to investigate
very nice patch indeed..
installed it on my JAM... an it runs OK...
some extinsive testing is required however... I'll let you know later
Thank you kevinyang6688
If this works, you'll be the best
Works here aswell!
it even seems to support bluetooth printing???
---
just downloaded.. will give it a try.
thanks.
Re: O2 MINI NEW BLUETOOTH STOCK.
kevinyang6688, could u pls send me the program for testing only, i am using o2 mini w/ jabra bt330 headset, [email protected]
kevinyang6688 said:
NOW I FOUND NEW BLUETOOTH STOCK FOR DOPOD 818(O2 MINI). ENJOY.
THIS IS SUPPORT YOUR O2 MINI SUPPORT STEREO BLUETOOTH HEADSET
ATTENTION: BACKUP YOU SYSTEM FIRST.
Click to expand...
Click to collapse
Re: O2 MINI NEW BLUETOOTH STOCK.
vicqoo said:
kevinyang6688, could u pls send me the program for testing only, i am using o2 mini w/ jabra bt330 headset, [email protected]
kevinyang6688 said:
NOW I FOUND NEW BLUETOOTH STOCK FOR DOPOD 818(O2 MINI). ENJOY.
THIS IS SUPPORT YOUR O2 MINI SUPPORT STEREO BLUETOOTH HEADSET
ATTENTION: BACKUP YOU SYSTEM FIRST.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
When you're logged on, you can download the file in the first post.
INstalled it but I have no clue how to make it work. Been to the BT settings and everything is there but I have no clue to as it does not detect my my Jabra BT250V.
Will this work in actually turning my Jabra into an audio headset or is it only as phone headset?
Does this help at all with the Nokia car kit echo issue?
Cheers
i'm using O2 mini. After installed... Nothing shown in the "Default headset" drop-down-list-box of the Audio tab
Anyone having similar issue?
To Leewenam
Same thing for me but my Bluespon ax is only detected as a handsfree
Re: To Leewenam
eurorpeen said:
Same thing for me but my Bluespon ax is only detected as a handsfree
Click to expand...
Click to collapse
I guess this audio streaming thing only work for stereo BT? can anyone confirm this?
leeweenam said:
i'm using O2 mini. After installed... Nothing shown in the "Default headset" drop-down-list-box of the Audio tab
Anyone having similar issue?
Click to expand...
Click to collapse
maybe delete the device and bond it again???
Re: O2 MINI NEW BLUETOOTH STOCK.
kevinyang6688 said:
NOW I FOUND NEW BLUETOOTH STOCK FOR DOPOD 818(O2 MINI). ENJOY.
THIS IS SUPPORT YOUR O2 MINI SUPPORT STEREO BLUETOOTH HEADSET
ATTENTION: BACKUP YOU SYSTEM FIRST.
Click to expand...
Click to collapse
Man, you seriously kick a$$! This cab adds A2DP, FTP (successfully sent a series of 3 files to my Magician :shock: :wink: ), Audio Gateway (was able to use my laptop as a BT handsfree ), BT Printing Profile... AWESOME!!! Takes MS BT stack to a whole new level :shock:
But you could already send files with activesync over bluetooth without this stack (do i suppose ftp service is the same thing). Btw can you acces the files located on your computer from your mini now??? (if yes plz tell me how)
As far as I am concerned, it works but doesn t change anything with my bluetooth headset and voice command, i always don t hear any voice command sound in my bt headset, but then I hear the phone conversation directly in the headset...so nothing has changed.
Would have loved so much to hear and launch voice commands directly from the headset's mic.
But thx anyway! that s a really good thing for us anyway =)
It does work with I-tech S35 Stereo BT Headset
As per subject really...
Just tested this on my 1.12.00 T-Mobile Rom and indeed all audio is indeed being re-directed to my headset. Only 'drawback' is that I can't get it to work with PocketMind Pocket Music- the sound it just muted.
But it works perfectly well with Windows Media Player. Slight hitch with WMP is that I am unable to change the volume on the software or indeed the JAM system volume directly- a minor fault for me since I have a volume control my headset Also the music seems to cut out for a second or so every 7-8 seconds.
Music pauses and restarts when an incoming phone call is received.
A massive thanks goes out kevinyang6688. Cheers mate, I have been wanting this for ages! Thanks again!

bad sound with headset: spv c500/SBH100

I m so disappointed!
I hone a SPV C500 since 2 years, last week I bought a stereo Bluetooth Headset Samsung SBH 100.
I succeed to connect my bluetooth devices with my phone, it’s working why the voice.
But to play the Mp3 on my headset, I installed Bt AudioToggle, and now I have a very very bad sound on my headset.
Is it possible to upgrade something or do I need to change my mobile ?
Please help me!
Thanks
Capjulio
Bt AudioToggle is a hack that sends all audio to bluetooth the same thing happen to my HTC wizard when using this but when using the A2DP profile the sound is great. I dont think they have A2DP for WM2003 SE but if you get it to WM5 maybe there is a chance you can get it to work.
Can u post Bt AudioToggle or a link i can seem to find it for smartphone.
Hi,
i bought a Samsung SBH100 BT headset, works fine with my Asus P535, but on the headset just only volume buttons working FF and play/stop don't do anything. I use CorePlayer (TCMP) on the PDA.
What I do wrong?
Please help!
THX
U can try change the regedit
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\A2DP\Settings]
"MaxSupportedBitPool"=dword:78
"BitPool"=dword:40
"UseJointStereo"=dword:0
"Samplerate"=dword:48000
"BitPool"=dword:40

again... BLUETOOTH ISSUES

hello everyone!
i just got my first bt headset, its an anycom aris21.
the pairing with my blueangel worked like a charm, but after a day of useage, i noticed several issues i kinda dislike....
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- people seem to have problems hearing me! can i change the microfone volume of the bluetooth headset on the ba?
- how can i find out what BT stack i have?
- i have now helmi_c's WM06 installed, no changes to bluetooth made.
what recommended changes/updates/patches/... should i try for better performance?!
what to install for best results?!? is that BroadcomBT1.7 still the way to go? what cabs do I need?!
i know, that some issues have already been adressed, but things are changing so fast here, that i have problems being up to date about all issues! so forgive my ignorance and please help me!
i would be very thankful!!!
regards,
krz
Yeh, the Blue Angel is a bit strange with some bluetooth devices.
I have the following issues with WM6 on my BA, which did not exist with 2003SE:
1) When Bluetooth is active, the device turns on by itself every minute or so. I understand that this is a hacked "feature" to prevent the bluetooth from turning itself off. This is probably the most annoying thing about WM5/WM6. Is there any fix I am not aware of?
2) When I start from scratch and pair my carkit (Parrot), everything works OK, except that BA's sound putput, i.e. for Microsoft Voice Command, is coming from the BA instead of the car kit. This is too low a volume, to be clearly understandable in a car. With my Universal (also on WM6) this does not happen.
3) After pairing my Asus GPS, nothing works. If I delete all paired devices and just pair my Asus without being in range of the car kit, it will work. If both devices are turned on (car kit and GPS Receiver), none works properly.
I don't use my BA on a regular basis anymore, because I have my Universal, which works flawless. However, I see no paint in upgrading to WM5/WM6 if one ends up with LESS functionality than the original 2003SE.
The only feature I will be missing is the fact that no RAM memory is used, which means one does not loose everything when the battery drains.
Are there any tips to solve these three problems?
The WLAN "bug" is not really a problem: even with 2003SE I had to occasionaly start and restart the WLAN for it to work properly.
Cheers,
vma
@vma:
1. Well, not at the moment; maybe if someone who can play with the dll's can fix this.
2. I use a Logitech hands-free, and i have no problems.
3. No problem here using a NoBrand BT GPS receiver and the hands-free in the same time.
Overall, my BA work much better on WM6; its just my experience.
problems i still have:
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- how can i find out what BT stack i have?
- i installed that Boradcom stack 1.7 without having any succes in getting my headset to work. with or without patch1 and htcheadset! any ideas?!?
- what excactly is that HTC HEADSET ADDON ?
please answer soon, any help is very much appreciated!!!!
thx in advance,
krz
1. Same here; i think is my hands free set limitation.
2. I get the same using the Broadcomm stack; use the MS stack.
3. Depends; if you use Broadcomm/Widcomm, you have an "about" box; if you use MS, i don't know.
4. i get it working, but with audio in hands free AND speakers; annoying.
5. don't know, try Google.
DANDANA said:
@vma:
1. Well, not at the moment; maybe if someone who can play with the dll's can fix this.
2. I use a Logitech hands-free, and i have no problems.
3. No problem here using a NoBrand BT GPS receiver and the hands-free in the same time.
Overall, my BA work much better on WM6; its just my experience.
Click to expand...
Click to collapse
What Bluetooth Stack you use ?
First, I use the existing MS Stack on Helmi WM6. BT GPS and Handsfree couldn't run at the same time.
Second, I use Broadcomm Stack 1.71. BT GPS and BT Stereo could run at the same time, but Hands-free function didn't run at all.
Give me a light please.
your bluetooth headset
A few of your problems could be from the bluetooth headset you are using now-- such as when people can not hear you clearly. I currently have a sound id sm100 bluetooth headset and it works flawlessly....although i still can not activate voice calling from it(it activates it on my BA so i have to talk into my BA and not my headset). It could just be your headset.
shazzy84 said:
A few of your problems could be from the bluetooth headset you are using now-- such as when people can not hear you clearly. I currently have a sound id sm100 bluetooth headset and it works flawlessly....although i still can not activate voice calling from it(it activates it on my BA so i have to talk into my BA and not my headset). It could just be your headset.
Click to expand...
Click to collapse
Yeah, Bluetooth in BA really sux... you have to choose your bt handsfree wisely, make sure you try it on BA properly before buying it... currently I am using i clip II mini, and it is giving me the same behaviour as shazzy84's
KRZTF said:
hello everyone!
i just got my first bt headset, its an anycom aris21.
the pairing with my blueangel worked like a charm, but after a day of useage, i noticed several issues i kinda dislike....
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- people seem to have problems hearing me! can i change the microfone volume of the bluetooth headset on the ba?
- how can i find out what BT stack i have?
- i have now helmi_c's WM06 installed, no changes to bluetooth made.
what recommended changes/updates/patches/... should i try for better performance?!
what to install for best results?!? is that BroadcomBT1.7 still the way to go? what cabs do I need?!
i know, that some issues have already been adressed, but things are changing so fast here, that i have problems being up to date about all issues! so forgive my ignorance and please help me!
i would be very thankful!!!
regards,
krz
Click to expand...
Click to collapse
Well I found a way to solve the BTA2DP problem. It supports stereo & is just fantastic. you can find these by the following link http://www.teksoftco.com/index.php?section=freeware & this software works too http://www.trianglepowers.com/PPC/ViewApp.aspx?ID=52 (have to register to download). I prefer Teksoft freeware as I am using it. Sometimes it takes a while after a few toggle u get it right
Lost in China
I have a problem with a Chinese Dopod HS-01 BT Stereo Headset!!!
Phone works, but the Stereo Headset starts for a second or two and then it is gone!
Please, help!
Admire people who can bring an answer!
I myself only good in learning physical languanges. So need MP3 HeadSet!
Also using SuperMemo CE the most beautiful tool for language learnig!
Is there any other solution then to change the registry and the things?
Using:
WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5
No one to ask for help over here!
My MSN:
[email protected]
Skype:
janicic
MySpace:
www.myspace.cn/taijiyoga

Motorola S9 Bluetooth headset and P3600/S300: A2DP Problem

Hi all,
Well, after hours trying to search in this forum for a solution to the most common problem with our trinity, the A2DP profile to enjoy our music... I'm like in the beggining: I can't hear my music in my headset, only some sounds and calls.
I'm not sure, due the big number of post I read, about the correct patch/hack/app that I must install, so please, I need advice for this settings:
Trinity: AKA S300 from Vodafone Spain,
WM5,
Original ROM 1.23.164.7
Radio:1.33.00.01
Headset: Motorola S9
I Tried before with zoki A2DP, but doesn't works. So please, before installing any other thing, have you got any advice?
Thanks a lot, regards
Same Problem
Hi,
I´ve had problem with Morotola S9. The bluetooth lost audio for a few seconds. Them returns for a few seconds.
Some Ideia ?
Hi all,
Well, good and bad news about my problem
The good one is that after uninstall zoki's hack and install HTweakC 2.0, execute the tweaks of A2DP, I get my music sounds through the s9
the bad is that I can only hear music in stereo and calls in mono (only by the left ear). Videos doesn't go through headset: simply the sound goes to speaker, like if no headset are connected.
Any idea about this? TIA, regards

Categories

Resources