Database Users

Please save my SP3i :(

lastnight when i downgrade from WM5 to WM2003SE without having sd image, i used typhoontools to flash the bootloader from the french orange rom then reinstalled the lastest Qtek 8020 rom under bootloader mode. everything seem going well.......BUT when it get to 100%, the phone restart itself, and on windows saying something like "Successfully............you may now retart your smartphone....."
after the phone restarted it go straight to the bootloader mode (3 colors screen) and i try to hard reset........it dosen't work.....
then i try to flash the rom again........same thing happen
Could anyone have any idea??? plz help me..........otherwise.........my phone will never be able to use..
many thanks in advance

you're ****ed mate.

problem solved, for those who Stuck in SPL1.xxx SPL 2.xxx after WM2005, please go to http://www.spv-developers.com/forum/showthread.php?p=3576#post3576
for how to get back to WM2003

Wallaby upgraded and now frozen at ozup

I tried upgrading for the first time. I picked Windows Mobile 2003 Second Edition (3.04) from the following link:
http://wiki.xda-developers.com/index.php?pagename=ROMVersions
The upgrade was successful however my wallaby freezes at the ozup. I can reach the bootloader if I hold the power button and soft reset.
I do not have a backup of my rom image (it was initially T-Mobile PPC2002 3.14.40_ENG)
Which rom image should I use with the XDAtools to flash back? Where can I get that rom?
Please advise.

You could try the 4.01.12 ROM IMage, but the problem can still exist. There have been a few devices, that are just working with PPC2002.
If you really have such a device i would suggest the 3.17.03 ROM....
Stefan

XDA upgrade problem - NOBODY solved it yet

Hello
I have the same problem as many Wallaby users. I tried to upgrade wm2002 to wm 2003 or 2003SE but every time is the same problem - it hangs up on first screen after showing ROM numer and Radio number. And theres one thing more - when I've flashed it for the first time it worked fine for a while and then it hung. After soft reset it stoped on first screen
DOES ANYBOD HAVE A SOLUTION TO MY... SORRY OUR PROBLEM :?: :?: :?: :?: :?: :?:

Urgent help: HTS P3300 stuck up

Dear All,
Please urgent help required.
my HTC P3300 (Artemis) stuck up when i was trying to start it up. when i use to turn my cell on, i goes to the starting screen shows the following numbers and then stuck up.
IPL 3.07.0001
SPL 3.07.0000
GSM 02.69.90
OS 3.7.0.0
the screen does not move after that. i tried soft reset through the reset button but result is the same.
i also tried hard reset and when i puch the green phone button to proceed, a message come "FORMAT FAILED" and the phone stucks up.
i am quite a lot of problems since i have upgraded to WM6 from WM5 last week.
i am quite sucked with this problem. not been able to use my set since yesterday.
please also note that my HTC was not syncing with my PC since i have upgraded to WM6.
PLEASE HELP URGENTLY.
Nomi

You must upgrade :
-Remove SD-Card
-Remove Sim-Card
-USPL
-Upgrade new ROM

thank. i got through to install wm 6.1.
can any one please tell me which is the most stable ROM for 6.1 or 6.5
which one is better for my HTC artemis.
please post link to the ROMs

I'm using two roms :
Shady313-23081R1 : http://forum.xda-developers.com/showthread.php?t=546805
dheewatara-s 23075B1 : http://www.pdamobiz.com/forum/forum_posts.asp?TID=255901&PN=1

same problem..pls help
i have same rom and ratio with u nomi...but my problem still occur...
where do u get the USPL eventually?

Problem after downgrading from wm6.5 back to wm5

I face a strange problem on my dopod 818pro after I donwgrade from wm6.5 back to wm5 NVID rom.It take about 5 minuets to boot back to the windows,even thought i did several time of hard reset it is d same too. Does anyone encounter with this kind of problem before? Please advice.

No sifus can HELP???

Finally I solved d problem liao by upgrading back to wm6.5 Build 23053 WWE bikertibi edition.

Help <urgently needed
Hi everyone,
I tried to upgrade my HTC universal from WM 5 to WM 6.5 using the rom provided by xda v1.01 (128MB rom).
I tried to install the upgrade from my laptop but during the process i noticed a sound indicating that the USB connection was lost. Now all i can see in my phone is 'Serial' at the top and 'v1.01' at the top. Aside that, the phone's literally DEAD.
Is there anything I can do about the phone or is it wasted?
Would appreciate any form of response.
Thanks.