Database Users

Remove COnnection settings...

Hi all,
I recently set up some new connection settings (changed from O2 to Vodafone). However, as I have connection settings saved in Permanent Save the old ones are still there and can be selected from the 'select networks' list. It also appears to default to some old ones every time I go into 'connections'.
Is there a way to remove these saved connection settings from the permanent save memory?
Cheers - Rich

Facing same problems!
Hi
sorry but i m facing the same problem and still digging in this forum to find the solution.It seems that I read the solution one time but now impossible to find it again.
Still digging,i m sure we will find!

i may have misunderstood...
if you just goto the seetings and delete them, then do a new permanent save, that should overwrite any old settings?

GPRS web browsing problem -limited access and no full google

I'm on Tmob USA's GPRS which works fine, except certain pages (like the html full version of google) or blogger.com just will not load over GPRS. I've tried some registry tweaks to make my browser look like another browser and some other tweaks that were recomended and I still have no luck.
I believe another JasJar user was able to set the preferences at Google to always load pages as HTML, but over GPRS I can't save my preferences on that page to do so. Over wifi I'm able to connect to any page just fine (and I've set my google preferences to HTML from the device on wifi), so I believe somewhere the device is changing the settings depending upon my connection method.
This is one of my last JasJar bugs that's driving me nuts. Please help if you can!

Really, no one else is having this problem? crap....

After my last hard reset google keeps diverting to www.google.co.uk/pda. I think that's because I haven't used Tweaks2k2 to change a few bits, as I normally do, but you can still view 'proper' google, by going into preferences (on the website) and changing the default to 'HTML'

sub69 said:
After my last hard reset google keeps diverting to www.google.co.uk/pda. I think that's because I haven't used Tweaks2k2 to change a few bits, as I normally do, but you can still view 'proper' google, by going into preferences (on the website) and changing the default to 'HTML'
Click to expand...
Click to collapse
See, I tried that with no luck. When I navigate to the preferences page over GPRS it fails to save my preferences, literally every time it times out. When I use Wifi I can navigate to the preferences page and save the preference for full HTML, but it still doesn't load when using GPRS. It's pretty clear that it's using a different set of connection settings when the connection is made via GPRS. What settings do you use with Tweaks2k2? Maybe that will work for me...

As I see it, there are three possible reasons:
1) The connection is not a full internet GPRS connection and maybe instead going to a "walled garden", or using WAP
Go to settings, connections, connections, Manage existing connections and duplicate the settings from your Universal onto another device capable of taking your SIM card. Try that sim card in another device with the same connection settings. I expect you'll get the same results. If so, post the settings here
2) Tweaks has done something undesired. Can you list a few websites that are failing? Personally, I'm reluctant to install ANY software until I'm 100% convinced I need it. This applies also to my desktop and trippley so to my server
3) Blame the user :lol:
I reckon it's 1) :idea:

I just set it to recognise pIE as IE6.0
I'm not convinced that that's going to fix the problem you have though, because I'm sure that I've had that problem on other PPC phones which I never used Tweaks2k2 on, and there was some other way to fix it.
I'll have a play around and see what I can come up with...

xiasma said:
As I see it, there are three possible reasons:
1) The connection is not a full internet GPRS connection and maybe instead going to a "walled garden", or using WAP
Go to settings, connections, connections, Manage existing connections and duplicate the settings from your Universal onto another device capable of taking your SIM card. Try that sim card in another device with the same connection settings. I expect you'll get the same results. If so, post the settings here
2) Tweaks has done something undesired. Can you list a few websites that are failing? Personally, I'm reluctant to install ANY software until I'm 100% convinced I need it. This applies also to my desktop and trippley so to my server
3) Blame the user :lol:
I reckon it's 1) :idea:
Click to expand...
Click to collapse
Some interesting ideas there. Some of the sites that are failing include:
www.google.com - I can't access the full version and the PDA version hangs constantly during loading and loads results very slow, no images shown when image search is done.
www.blogger.com - It tries to load www.blogger.com/start which again hangs terribly and loads a version of the page with no images.
Various internet shortcuts I imported over from my bookmarks I used on my Dell Axim X30 (PPC2003SE). I'll have to pull a list later if I'm still having this problem.
I don't have another PPC Phone device so I can't try the settings swap but it does sound very likely. I am currently using the cab file from imate for tmobile USA settings (which does create a connection called "tzones" which kinda worries me), it uses the internet2.voicestream.com access poin. I had also manually configured the settings previously using these settings and still had the same problem (pulled from a hofo post by Mashie):
Goto Start > Settings > Connections > Connections > Add new ISP...
Give it a name (T-Mobile)
Select Cellular Line (GPRS)
Next
APN = wap.voicestream.com or internet2.voicestream.com (whichever you like)
Next
Next
Finish
leave username, password, domain, etc... all blank
Click to expand...
Click to collapse
But maybe I need to try some different settings... I'll try playing with the settings I have, creating new settings, and hounding some other Tmob USA GPRS user's settings (hopefully someone using another jasjar).
Re: #2, I haven't actually used Tweaks, I used Resco registry editor to try and make the browser appear to be a full PC browser. I tried a ton of registry settings suggested by some more Hofo super-users, but nothing worked. I eventually got really creative and desperate with some registry edits and finally hard reset the device, tried the suggested reg edits again without success, then hard reset again.
Re: #3 - lol. I seem to be the only one with this problem, so I'm not rulling it out... I was a bit worried someone was going to suggest that the PEBKAC (problem exists between keyboard and chair).

www.hotmail.com and www.handango.com are sites I have experienced cannot be accessed in their full PC version. The PIE on the JJ takes us to the mobile sites.
Likewise a strange thing happens when I try to log into the "PocketPCDubai Forums". PIE starts to download the site page. I can see the progress indicator gradually move up. When about 180 Kb has been downloaded the progress indicator disappears meaning that the page has fully been downloaded. Nevertheless the page is blank and with nothing on it.
I also have tried to modify the registry to make the PIE appear as a full browser but nothing seems to work.
Regards

www.hotmail.com and www.handango.com are sites I have experienced cannot be accessed in their full PC version. The PIE on the JJ takes us to the mobile sites.
Likewise a strange thing happens when I try to log into the "PocketPCDubai Forums". PIE starts to download the site page. I can see the progress indicator gradually move up. When about 180 Kb has been downloaded the progress indicator disappears meaning that the page has fully been downloaded. Nevertheless the page is blank and with nothing on it.
I also have tried to modify the registry to make the PIE appear as a full browser but nothing seems to work.
Regards

"www.hotmail.com" and "www.handango.com" are sites I have experienced cannot be accessed in their full PC version. The PIE on the JJ takes us to the mobile sites.
Likewise a strange thing happens when I try to log into the "PocketPCDubai Forums". PIE starts to download the site page. I can see the progress indicator gradually move up. When about 180 Kb has been downloaded the progress indicator disappears meaning that the page has fully been downloaded. Nevertheless the page is blank and with nothing on it.
I also have tried to modify the registry to make the PIE appear as a full browser but nothing seems to work.
Regards

Has anyone had this issue and resolved it via ROM upgrade? I'd be ready to upgrade the ROM right away if I knew it fixed this issue. If not, I'd rather not waste a few hours setting up, reinstalling, and configuring everything.

Does Mozilla Minimo work on the JasJar?
If it does - I believe that might offer a more feature full alternative to the bundled pocket PC InternetExplorer Galt.
Hope this helps

Finally remembered the address that I used to use for Google when I had this problem on my Jam...
http://www.google.com/webhp
That wont redirect you to the /pda page. There are probably similar pages for other websites, but this is the one I used most!

This registry hack will make Pocket Internet Explorer identify itself as IE 5.5 on Windows 2000. However it will prevent web sites that provide Pocket PC specific content to be able to know you're actually using a Pocket PC
Change Pocket IE to IE Version 5.5 (For Secured Sites)
1) Go to the HKLM\SOFTWARE\Microsoft\Windows\?CurrentVersion\Internet Settings\User Agent\ key. 2) Set the default value to "Mozilla/4.0" (Default is "Mozilla/2.0"). 3) Set the "Version" value to "MSIE 5.5" (Default is "MSIE 3.02"). 4) Set the "Platform" value to "Windows NT 5.0" (Default is "Windows CE").
This will only work on some secure sites that check version number rather than perform a check for support of secured transactions.
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry

Carnivor said:
Change Pocket IE to IE Version 5.5 (For Secured Sites)
1) Go to the HKLM\SOFTWARE\Microsoft\Windows\?CurrentVersion\Internet Settings\User Agent\ key. 2) Set the default value to "Mozilla/4.0" (Default is "Mozilla/2.0"). 3) Set the "Version" value to "MSIE 5.5" (Default is "MSIE 3.02"). 4) Set the "Platform" value to "Windows NT 5.0" (Default is "Windows CE").
This will only work on some secure sites that check version number rather than perform a check for support of secured transactions.
Click to expand...
Click to collapse
Tried that, didn't work for me.
sub69 said:
Finally remembered the address that I used to use for Google when I had this problem on my Jam...
http://www.google.com/webhp
That wont redirect you to the /pda page. There are probably similar pages for other websites, but this is the one I used most!
Click to expand...
Click to collapse
Tried that, although it loaded the main page (I think I had it cached from wifi browsing) it didn't let me search from there.
I finally upgraded my ROM to the latest 1.13.53 version and still couldn't resolve this with alternate URLs or registry edits. Any ideas, anyone? I'm using the T-mob USA cab settings from imate...

HTC 8125 - Enable manual network selection - Cingular

I have searched and searched and still cannot figure out where & what to edit in the WM5 registry on my Cingular 8125 to allow me to manually select networks and edit the preferred networks list.
These items are blocked out on Cingular phones. I'm sure this can be brought back with registry hacks, but I've yet to find them
For those of us who do not want to update the complete ROM to an unsupported and/or problematic build - please help!! :shock:
The problem is that the near-by ATT tower gives me a full signal on my MPX200, the Cingular tower gives me 0 to 1 bar!
My new 8125 will only let me access the Cingular tower (with only 0 to 1 bar!) I need to be able to hop on the ATT tower manually, and set it as my preferred network.
Thanks for any help in advance. I've spent hours upon hours reading here, so I know you guys know your stuff! Come on, Come on...

did you load the extended rom on your 8125?
if not, there is an "enable eons" cab file that you may want to run. it won't allow manual network selection, but it should log you on to whatever tower is strongest...

how can i do that on my Tmobile MDA?

I'm also having a problem with reception issues, I called Cing and the tech support told me that my 8125 was setup to be ATT preferred even though my strongest and closest tower was Cing.
The lady said she switched me to Cing preferred and that I should notice a change in ~24 hrs, I guess I'll find out in another 13 hrs.

SkyyBoy said:
did you load the extended rom on your 8125?
if not, there is an "enable eons" cab file that you may want to run. it won't allow manual network selection, but it should log you on to whatever tower is strongest...
Click to expand...
Click to collapse
Where is the extended rom? Is that all the Cingular stuff that installed on the first boot? If so, then yes, it's loaded.
Where can in find the enable eons cab you're talking about?
EDIT: I found what you are talking about, in FTP. I need to find detailed descriptions of these before I install them. Might be a work around, but still not exactly what we all need to get our WM5 back to normal. Thanks though.
I really wish someone could find the reg edits needed to bring these options back!
Anyone???

SkyyBoy said:
did you load the extended rom on your 8125?
if not, there is an "enable eons" cab file that you may want to run. it won't allow manual network selection, but it should log you on to whatever tower is strongest...
Click to expand...
Click to collapse
I'm not so sure that CAB file is our friend. I'm running the latest AKU 2.2 ROM (2.25) without any Cingular files installed and man do I get much better reception. Used to be that I'd drop calls twice (at least between office & home) but not a problem since I stopped loading those Cing CABs!

kyphur said:
I'm not so sure that CAB file is our friend. I'm running the latest AKU 2.2 ROM (2.25) without any Cingular files installed and man do I get much better reception. Used to be that I'd drop calls twice (at least between office & home) but not a problem since I stopped loading those Cing CABs!
Click to expand...
Click to collapse
So, do you have the options to set up your preferred networks? And manually choose which network to connect to?
Start > Settings > Phone > Options > Network tab
???
And how stable is that 2.25 ROM? Which product exactly was it meant for?
Thanks a bunch

Well I just upgraded to Cingular_RUU_WIZARD_217_AKU22_Basic.exe and still have the same problem!
I went ahead and let the customizations install. It's gotta be one of those cabs that removing the manual network selection and preferred networks options!
This sucks because I want everything EXCEPT the one that's causing this. If I stop the customization process by soft-resetting right before it starts, is there a way to install the cabs one at a time??? Where are they actually stored on the device, I cant seem to find them.
Thanks in advance...

Ok, for an update...
I re-flashed to Cingular_RUU_WIZARD_217_AKU22_Basic.exe and this time I did not let the customizations run. I did a soft-reset at the 3sec prompt.
Phone booted up, everything looks OEM, nothing Cingular at all. However... I STILL DO NOT have the options I'm looking for in Start > Settings > Phone > Network tab
There is supposed to be an option in WM5 to change between manual and automatic network selection, and a preferred networks list editor...
This is ridiculous! Is there maybe a block built into the SIM? How can I edit the SIM then? I NEED to remove this crap that Cingular's built in. Not letting us select networks and manage our preferred list is BS!
I really cannot believe there is no fix/hack out here yet for this... Help some one please!!

What SIM card do you have?
The solution may be worked around in the software but all Cingular 64k SIMS block setting preferred networks.
Cingular lately has been working to put a stop to excessive off network useage...hence the EONS file but that still is set by the SIM to save the preference.
Im sure someone with skills can write an app to load at startup that can do the same functions but at stock it's not possible.

I just confirmed that!! Damn SIM cards.
I was able to dig out my old ATT sim card and ALL the settings I was looking for were there!
Some one PLEASE come up with a way to either edit Cingular SIMs not to do this, or block them from doing it... please!

Check your PM, may be able to help you a bit

Thanks Decepticon, a possible work around. However, I really would like to put everyone to the test and fix this by blocking Cingulars SIM or registry entries from disabling network selection and preferred networks.
Here is an update every one:
Developers, listen up, shine for us on this one please
HKLM\Security\Phone\
L: 0
ManualDisable: 1
PreferredDisable: 1
I changed the two 1's to 0's and bam! I have the settings under Start > Settings > Phone > Network tab
I can view all networks, set to manual, look at preferred list, etc etc
BUT... when clicking OK, get an error "Unable to save settings on network, try again". So no settings stick
Also, after a softboot (properly waiting for registry to save) the above settings go back to 1's.
This has got to be something in the SIM, a program in Startup, or a registry setting that keeps changing these settings back upon boot. Because they are not programmed out, just blocked at boot.
Here is what I have listed in Startup:
CapNotify
custTDYTSK
Init_Tray
Magic_Button
poutlook
sddaemon
WiFiInit
Any of them suspicious?
Let's bang this out folks...
Can someone attempt to view Cingulars SIM contents and block whatever changes these registry values?
Anyhow, just some more info for ya'll :wink:

jberylec said:
I can view all networks, set to manual, look at preferred list, etc etc
BUT... when clicking Ok, get an error "Unable to save settings on network, try again". So no settings stick
Click to expand...
Click to collapse
That's when it attempts to save the preferences to the SIM.
Unfortunately editing the registry wont be able to get this accompolished but I do hope someone can write a program that saves the preferences on the phone and use it to override the SIM upon tower selection.

Settings don't stay with a non-Cingular SIM after reboot
I used a foreign SIM on my Cingular 8125 and after registry was changed and soft reset it defaulted to origninal Cingular settings. Truley SAD! Any other ideas about registies that could make the Manual Network selection become available for use permanently? Got to be something else. How about posting the registy values from other HTC's (non-Cingular) or Cingular with that activated feature to perceive the difference.

You keep referring to:
Start > Settings > Phone > etc.
On my 8125, when I go to Start > Settings the only tabs I have to choose from are Personal, System, and Connections. Where is this Phone tab you keep mentioning?

BTW, I am running the Dopod 2.21 WWE rom on my Cingular 8125. I do have manual network selection available in the Phone control panel settings.

maxh said:
You keep referring to:
Start > Settings > Phone > etc.
On my 8125, when I go to Start > Settings the only tabs I have to choose from are Personal, System, and Connections. Where is this Phone tab you keep mentioning?
Click to expand...
Click to collapse
It's not a tab. It's an icon in there. Click on it to open the phone settings. Then go to the "Network" tab at the bottom. You'll see a screen that just tells you what Network it's on, and one button called "Find Network".
Cingular's SIM card blocks the other buttons that let you manually select which networks to connect to, and lets you save your preferred network list.

SkyyBoy said:
BTW, I am running the Dopod 2.21 WWE rom on my Cingular 8125. I do have manual network selection available in the Phone control panel settings.
Click to expand...
Click to collapse
So do you have those options WITH a Cingular SIM card in the phone?? Or are you using a different carriers SIM???

Common CONFUSION about SIM and FIRMWARE
Folks, the manual selection of the network is simply blocked in certain versions of ROM. Cingular in particular and on purpose has started doing that especially in the late versions of so-called HTC/Cingular ROM editions. Everything is about money now. So depending on SIM card (straight 64K or 3g 64k) your phone has more or less tendency to stick to this preferred CINGULAR network. However your ability to choose network manually solely depends on the ROM of your PDA/phone. I personally like Dopod 838 Rom 2.21 etc which works a whole lot better in all aspects. Trust my experience. AND you DO HAVE this ABILITY to manully select a provider. One more thing! Using a simple 64k SIM card on CINGULAR ROMS gives you FAR BETTER RECEPTION AND CLARITY than on 3g SIM card.

Can't save video to storage card - not an option

I can’t save video to the "storage card" it doesn't give me that option anymore – only options are “main memory” or “network”
I’ve seen the previous post
http://forum.xda-developers.com/viewtopic.php?t=50588&highlight=
but this didn’t help - how do I disable network folder option. then re-enable it after.”
I don’t have Pocket LAN installed or any LAN *.* but I recently installed “Resco Explorer”
Any guidance is appreciated.

CINGULAR GPRS

I am wondering where the password information is stored for the cingular gprs settings. I am not asking how to enter the settings into the dialogues, rather where in the registrythe password info is stored.
I am aware of the settings located at these two locations...
[HKEY_LOCAL_MACHINE\Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}]
and
[HKEY_CURRENT_USER\Comm\RasBook\My ISP GPRS]
Exporting/importing these restores everything but the username/password info. What I am trying to do is save the settings so I will be able to more quickly restore them after a hard reset, which I do often because I am constantly playing with different roms.
or... is there already a premade cab file that will install the needed settings including cingular's generic username/password?
and for that matter, where is the password stored for activesync? After I import a reg file I have on my phone, I have all the activesync info properly entered except for the password.
I realize these are one time items to have to enter, but it would certainly make system rebuilding go a bit faster...
I hope you managed to get this far into this rather overly verbose essay.

found it.
hell yes:
[HKEY_LOCAL_MACHINE\Comm\Security\CredMan\Creds]
I am cool.

Okay, the question I have then is how did you figure it out, and more importantly, how do you know which key is associated to which connection?

Some crappy registry snapshot program
It is called ssnap, that coupled with a program called idiff, I was able to discover changes made to the registry after doing something (check/uncheck something, enter a setting, etc...)
http://s-k.al.ru/wince.html
If anyone knows a better program than these rather primitive monsters, please let me know. I am looking for something similar to installwatch for the PC by Epsilon Squared.
Those settings did not work anyway. That was definately the location where the settings were stored, but they must be coupled with something else. I was able to install and uninstall the username/password by setting/removing those registry entries, but after a hard reset, they did not work anymore.