Database Users

need to make my brick back to a fone plz help

cingular 8125.
I need the original rom file (original firmware )can anybody help plz right now my fone stuck on the RUU mode can anybody help

If it is realy a brick without any chance of life I need a part of it: the keypad.

Thats really rude.

not a complete brick yet
not a complete brick yet is in loader mode red,blue ,green screen

All the cingular roms are here ftp://[email protected]/Wizard/Roms/Cingular/
user name xda password xda
which rom do you have?
It looks like you are in bootloader (multicolored) mode so that is good
connect via usb - you dont need to activesync to update rom. You should get a usb sign bottom left of screen and then start update.

Upgrading without activesysnc
After a interruptus ROM upgrade my s200 d'ont start . after the HTC i have a white screen but not more.
The activesync don't connect and i can't put the ROM another time.
I obtain the multicoloured screen with usb in the left botton.
Please, could anybody help me to update the rom in this situation , mayby without activesync ??
Regards.

You can flash a rom from the 3-colored bootloader mode (hold voice button when turning device on). When it says usb you can just flash without activesync.

Yes thank's i found a ROM that don't need activesync , after that i had changed that rom by my rom and at the moment my s200 y ok.
Thank's.

Problem after upgrading

I've performd the LvsW AKU2.3, but after the upgrade the system hangs on the splashscreen displaying de IPL, SPL and OS versions...
Can anybody help me with this problem ? Is there like a rom recovery tool or something?

Some more info:
IPL 2.10.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.7.34

Never mind fixed it allready

how can fixed it??

same problem here. How did you fixed this problem?

Press and hold the camera button then press the reset button once. after that u release the cam button. u will see a colored red and green something screen.
In this mode u canupgrade ur prophet with any rom u want. The upgrade tool can read out ur device in this mode. I suggest u use a rom made for the prophet lol
Have fun

u mean that we can take any original rom to recover ! ?then we can run the upgrade at winxp via usb to upgrade ?
can told me step by step to upgrade at this mode , thanks

Well... theres nothing much to it...
When u press the camera button and the reset button at the same time and hold the camera button when u release the reset button, the device goes to a special boot mode or something...
What u see is a red-green-blue screen with the IPL and SPL version and at the bottom of the screen u see USB when u connect the usb cable.
To do next is run de original rom as u would do with a normal upgrade. Difference is that there's no sync active, just that windows detects a usb device.
thas all
I don't know if all the device's can run in this 'boot' mode, i guess u should upgrade ur IPL first in that case.. but i don't know the procedure for that unfortunately.. im new here too

oh and just in case:
The camera button is the top left button and the reset button can only be pressed with something pointy like ur stylus and is positioned at the bottom just on the left side of the usb connector

Hard Problems changing ROM

Hi,
I've tried ROM (RUU_Sedna_HTC_WWE_1[1].02.405.1_Radio_Sedna_1.58.13.28_signed_Test) and my P6500 it's out. Some know how to put it in a bootloader mode.
I have HardSPL from Oligopro. Rom charge Ok but when % is finished the screen turns white and don't function.

Press the power and OK key and softreset at the same time .

dont forget too pull the usb cable out or else it wil not work
®

help hermes 100 shutdown for good

i try to install new rom , after it restart it showed the 3 colors on the screen and from then it went off and it show the colors in a very dark light. and i cant flash or start the windows,also it doesnt restart.
any one can help me out
thanks

Did you have hardspl prior to installing the ROM? Anyhow, running your carrier stock ROM should get you going Then you can install any ROM you want (give that you have hardspl).

What do you mean running me carrier stock ROM ? I cant connect it with the pc to do something and the screen is black when i try to restart or when i reinstall the battary in again. but in the screen it show me the 3 colors in a very dark light no lights in the buttons are working.
And there is not red led when i connect with usb cable

gmenelau said:
i try to install new rom , after it restart it showed the 3 colors on the screen and from then it went off and it show the colors in a very dark light. and i cant flash or start the windows,also it doesnt restart.
any one can help me out
thanks
Click to expand...
Click to collapse
u r PC able to detect u r phone?
(i mean when u plug u r device to computer, it will automatically detect the device, and phone display will show USB instead of SERIAL)
if yes, u may install Hard-SPL-V7 Olipro V7 2.10 (file attached) with Force Unsafe SSPL (not recommended) option selected.
if u managed to do this, u will be able to flash any rom and u r phone not gonna brick any more.

No the computert it can not detect the device .

No the computert it can not detect the device .

gmenelau said:
No the computert it can not detect the device .
Click to expand...
Click to collapse
how about in boot loader mode? is u r computer able to detect phone? (u will C USB mode displayed in tri color screen)
boot loader mode : hold u r OK button (near wheel) + power button and use styles in reset hole....keep that way till u c the tri color boot loader screen

Also make sure you untick "Allow usb connections" in activesync connection settings on the pc. Also reset into bootloader mode.
You may have hardware as well as rom trouble if you can "see" the bootloader in darkness. I had the same trouble that turned out to be the flywheel needing replacement. Hopefully you won't have these problems...
Cheers...
Also , on the tri-colour screen, can you make out what the IPL and SPL are? To fix this you need Hard SPL(if hard SPL will be 2.10 olipro) installed and without it this could soon become a nightmare and you could become bald from frustration...

i try what you said expet the one for the flywheel ! still nothing , i also i notice that the led for the battery when i connect it with the usb or the caple it start for a sec., and then it shut down ...

ultramag69 said:
Also make sure you untick "Allow usb connections" in activesync connection settings on the pc. Also reset into bootloader mode.
You may have hardware as well as rom trouble if you can "see" the bootloader in darkness. I had the same trouble that turned out to be the flywheel needing replacement. Hopefully you won't have these problems...
Cheers...
Also , on the tri-colour screen, can you make out what the IPL and SPL are? To fix this you need Hard SPL(if hard SPL will be 2.10 olipro) installed and without it this could soon become a nightmare and you could become bald from frustration...
Click to expand...
Click to collapse
I cant see anything i am sorry .Ii try what you said exept the one for the flywheel ! still nothing , i also i notice that the led for the battery when i connect it with the usb or the cable it start for a sec., and then it shut down ...

how can I Upgrade my Xda II if my camera and record button is broken?

Help, help!!!!
Certainly when upgrade from WM03 to WM06, we all must go to the boot loader option to clean registry, disable KITL, clean storage...etc . However,poor me, I have an XDAII with broken record and camera button, so that I can not get in Boot Loader ( Press ResetButton and hold down CameraButton + RecordButton )
So could any one solve this problem?
many thank!!!!

when i upgrade my i-mate into xda 2 i'm not pressing any button to get boot loader screen, why?
coz i'm new in pocket pc phone n dont have any experience about flashing pocket pc phone, i usually flashing cdma phone (not ppc, just mobile phone)
i'm from indonesia, i bought i-mate from stupid person with IDR250.000 (around USD$25) lol
but too bad, he's selling i-mate with arabic letter, i dont understand arabic, n another problem, that phone didnt soft reset when i press soft reset button
here's my 1st experience to upgrade arabic i-mate (1.66.00WWE) into o2 xda-2 (1.72.00WWE)
i downloaded radio.nbf file from this ftp n flashing with himaupgradeut_noID, when complete n phone got reset, u'll get bootloader screen, u can update your pocket pc with any firmware u want
Thanks
Arimbi

Arimbi said:
when i upgrade my i-mate into xda 2 i'm not pressing any button to get boot loader screen, why?
coz i'm new in pocket pc phone n dont have any experience about flashing pocket pc phone, i usually flashing cdma phone (not ppc, just mobile phone)
i'm from indonesia, i bought i-mate from stupid person with IDR250.000 (around USD$25) lol
but too bad, he's selling i-mate with arabic letter, i dont understand arabic, n another problem, that phone didnt soft reset when i press soft reset button
here's my 1st experience to upgrade arabic i-mate (1.66.00WWE) into o2 xda-2 (1.72.00WWE)
i downloaded radio.nbf file from this ftp n flashing with himaupgradeut_noID, when complete n phone got reset, u'll get bootloader screen, u can update your pocket pc with any firmware u want
Thanks
Arimbi
Click to expand...
Click to collapse
yes, its because you'r flashing Radio only, if you are flashing WM5/WM6/WM6.1/WM6.5 you need to enter bootloader mode!

Me to have only record button not working
But i made it,open your phone open whole parts,now attach your battery with a rubber ring so phone can start,notice that white part which is situated near the camera which has four pines fix it with screw or until your phone boots, you need four hands either to enter in boot loader mode or hard reset.you should connect the circuit button with a metal/wire,first try that button you will see camera or record working apply same for your needs. out of that four points of button adjust three to connect toughether to activate.