Related
I had my T-Mobile MDA (US) syncing with both my Home PC and Work PC.
Home PC dosen't actualy sync anything, I just use it to install apps & charge.
Work PC was syncing Outlook Contacts, Email, and Calander.
For the last several weeks it no longer connects to my work PC.
When I plug it in, ActiveSync 4.2 launches, says "CONNECTING" for over a minute, then says "NOT CONNECTED"
I haven't installed anything new (Other than XP updates)
I've searched the web and here and haven't found anything that might be causing this.
Thanks,
gNOMEintheRedHat
try going to file/ delete mobile device. Always works for me it makes a new device and starts syncing again.
nkognegr0 said:
try going to file/ delete mobile device. Always works for me it makes a new device and starts syncing again.
Click to expand...
Click to collapse
It's grayed out in the menu...
Today I tried plugging and unplugging several times in a row and I was finaly able to open the device in windows explorer, but it went to NOT CONNECTED and lost the connection before I could copy more than 2 pictures from it.
Thanks,
gNOMEintheRedHat
Hi
I have a Cingular 8525 running wm6 rom vp3g 3.0.0 , radio 1.50 I've been trying to conect the phone with the pc the orange led ligth up but there is not syncronization, I try soft and hard reset on the device without sucess and the pc conect without problem with other devices, please do someone can help me or point me in the right direction to resolve this problem and the other question is if I can flas the rom for other wm6 version from the store card
thanks.
Please could some one help me with this.
Thanks.
uninstall activesync... get the latest version from microsoft and install it... should be fine at that point...
Found that the advanced networking on WM caused me problems with Activesync and firewalls - Once i disabled it XP saw my 3100 as a plain ol serial device again..
Thanks, i'm going to try but i used my other 8125 phone and it is conectiong and this the 8525 is not conecting with 3 diferents PC, I was thinking if there is a way to flash the room again with the wm6 from the store card or over the bluetooth conection.
Have you looked at the Mr Vanx guides to help you solve this problem? The answer will almost certainly be found here: www.mrvanx.org
Good luck.
WB
Sounds like its the single phn.. check that network setting as it could be set correctly on the one that connects ok..
Wouldn't even bother trying to flash it over Bluetooth..
wao this been a pain, I try so many things, first remove the activeync, clean the temporary file from the c:/ drive then restar pc and fresh install the activesyn, went to the 8525 settings-conection-usb to pc and uncheck network and conect to the pc but nada nothing just the batterery stat charging but not link with the pc no even the pc reconize that there is a device conected to it.
please any other advice would be appreriate, the phone is working great but i have not comunication betwen the pc and the phone.
thanks.
mine has exactly the same problem.
It has been working with activesyn fine then today the PC wont even recognise the phone.
Tried remove/reinstalling activesync, new usb cable and even on a different computer.
The phone shows it charging when pluuged in but nothing else.
I'm NOT suggesting this is the problem you have but just a possible cause to eliminate:
Have you used Memmaid or any other application (Scarybear / Sktools etc ) to clear the notifications queue (clear duplicates for alarms etc). If you have then did you also clear other files. If you did then you may have deleted vital repllog files that make the computer and PC start Active Sync.
If you have not done anything like this then ignore this post.
Mike
Ok, i did not but if I removed by any chance some files removing other softwear how can we repair wm6 without the USB conection.
thanks.
hello I was checking my device information and it hasradio version 1.16, this could be the problem doing the sincronizatio? is there a way to upgrade the radio thru the store card instead fro the pc?
thanks in advance.
Kudos and many thanks for those who do so much for the rest of us...
I am having this problem as well, but only since I upgraded my base desktop to XPpro and Office2007. The error message given at times involves "mobile deviceX" hardware installation going awry; at this point, I am on device 10.
It also appears to be device independant for me; I just synced and upgraded a wiz100, which went fine and dandy until it rebooted with the new ROM. All new ROMs in fact, and devolving doesn't appear to stop it.
I believe there may be an XP registry screwup... but at this point, I got no idears whar ta go
Lost in Yokel mode
Later....
Chalk me up for #11...as usual M$ article is almost, but not quite entirely, USELESS!
maybe this'll help somebody else...but I kinda doubt it.
http://support/microsoft.com/kb/260061/en-us
SOS_it!
Active Sync not working
mikechannon said:
I'm NOT suggesting this is the problem you have but just a possible cause to eliminate:
Have you used Memmaid or any other application (Scarybear / Sktools etc ) to clear the notifications queue (clear duplicates for alarms etc). If you have then did you also clear other files. If you did then you may have deleted vital repllog files that make the computer and PC start Active Sync.
If you have not done anything like this then ignore this post.
Mike
Click to expand...
Click to collapse
Mike, I believe this is what has caused ActiveSync over USB not to work on my phone either. I cleared several items from the running notifications area using Task Manager v2.7 in an effort to kill repeating alarm alerts. I have currently running are: tmail.exe, repllog.exe, clock.exe and calup.exe. Could you please provide a list of other processes that should be running to allow activesync to operate properly over usb? I have researched this problem in depth and your idea is the only thing that makes sense
thanks.
mikechannon said:
I'm NOT suggesting this is the problem you have
Have you used Memmaid or any other application (Scarybear / Sktools etc ) to clear the notifications queue (clear duplicates for alarms etc).
Click to expand...
Click to collapse
THIS WAS MY PROBLEM!
i was using pmClean to clean temporary inet files and notifications, and it seems to be causing problems with activesync. i hard-reseted my Magician and activesync is working fine in every computer i attach it (almost a dozen right now)
thx a lot for your help!
On my old PC my 8525 connected to XP no problem, than I upgraded to Vista (dual-booted actually) and it just stopped working on both XP and Vista. Now I have a new pc and my problem still remains. I connect my 8525, sometimes the orange light goes on, sometimes it doesn't. When I installed WMDC (newest version) it didn't recognize the 8525 as being connected, so it installed drivers for an unrecognized device or something along those lines. Then sometimes when I connect the 8525 to my pc, it installs drivers for the 8525, and the box that says "enter your passcode" pops up. I enter it, and it'll either say it's wrong ( when it's right ) or the box will disappear and nothing will happen. It just never connects and I really want to put music on it. Any advice is much appreciated.
Edit: I went into ActiveSync on the phone and deleted all the PC's it had partnerships with already.
Read MrVanx's guide. It contains just about everything you'll ever need to know
I tried the guide but it didn't work because in Device Manager nothing shows up... no matter which USB port I put the 8525 in, it doesn't show up anywhere.
delete partnerships off the PC also, and temporarily remove your passcode.
try unchecking the advanced network functionality box in settings/connection/usb to pc
if worst comes to worst, backup stuff on your pocket pc and hard-reset
>>try unchecking the advanced network functionality box in settings/connection/usb to pc
Look for a "Windows Mobile Remote Adapter" in the network section of Device Manager. If you've already tried to connect with the "Advanced Functionality" checkbox checked, then the mobile remote adapter may have gotten installed. Once that happens, changing the "advanced functionality" won't help, and you won't be able to connect your 8525.
You need to unplug the 8525 from USB, then go into device manager and remove the mobile remote adapter, then change the "advanced functionality" checkbox on the 8525, and then connect your device again..
This is what happened to me, and how I finally got it working. Hope it helps you.
Brian.
There was nothing in Network Adapters or anywhere in Vista about it. I tried removing the password and connecting it without the thing in USB to PC checked off, still no luck. I would back everything up and hard reset but I've seen so many posts by people saying they've hard reset, lost everything; and then they came to realize it still didn't work =(
8525_b0tch said:
There was nothing in Network Adapters or anywhere in Vista about it. I tried removing the password and connecting it without the thing in USB to PC checked off, still no luck. I would back everything up and hard reset but I've seen so many posts by people saying they've hard reset, lost everything; and then they came to realize it still didn't work =(
Click to expand...
Click to collapse
Isnt that the point of backing up, so that you DONT lose everything?
^^ I still lose all of my programs and all of them are on my old pc
8525_b0tch said:
^^ I still lose all of my programs and all of them are on my old pc
Click to expand...
Click to collapse
If you get a trial version of spb backup and do a full one, it does more than just contacts and such, it'll do EVERYTHING, so when you put everything back its exactly the same as when u left it. Programs included.
I'm at a complete loss with activesync. I've done everything I can think of and I can't get my computer to see my 8525. I've reinstalled activesync and hard resent my device. When i plug in it says
one of the usb devices attached to this computer has malfunctioned and windows did not recongnize it
usb root hub (2 ports)
- unknown device
- usb composite device
Am I missing some sort of driver somehow? I don't know what to do..please help.
Hey i had the same problem. Is this your first time installing/using activesync??
Well what I did was this:
-Install activesync 4.2 from the CD (CD that came included w/unit).
-Uninstall activesync 4.2 (don't delete any drivers installed by the CD)
-Install activesync 4.5 (download it from Microsoft Website)
-Plug in your 8525 to the PC via USB cable, and your PC should NOW recognize it.
This is what I did and it helped. There may be a better/alternate way in doing this, but I FINALLY got Activesync to work!
Oh and see if you can help me with the prob. that I'm having.
http://forum.xda-developers.com/showthread.php?t=383065
Ya I can't find the CD that came with my phone for the life of me.
ok found disc and tried that. Nothing. Could my phone be broken?
heres what I had to do to get AS working again.
Delete the current version of AS from your PC
Go into c:/wondows/program files and delete the AS folder (Windows may not let you delete some DLL's.
Go into the registry and delete any AS entries you can find, or do what I did and use Ccleaner registry clean up program (Google it, it's freeware)
Restart the PC
Install AS 4.2 from the AT&T/Cingular disk.
Install AS 4.5 from MS.
Hook up your 8525 and all should be well.
Tried that....didn't work.
Still hoping someone has some advice. I've tried two different usb cables and used different ports as well so it's not that.
quick update...
I searched through the forums and googled a few things and from what I can tell other people have had this problem and not found any solution. I am considering trying bluetooth but I don't have bluetooth for my PC...can i get some sort of adapter? Also...Is there a specific driver I can download for the HTC hermes that might fix this issue?
Yea your situation sounds like the one I used to have.
Do you have a firewall?? If so DISABLE it. I have COMODO and even though I would press "accept", the drivers wouldn't install completely.
This is what I did:
-Start your PC.
-Uninstall Activesync through the Add/Remove.
-Delete the Microsoft Activesync folder in the Programs folder.
-Restart your PC
-Wait till your firewall loads up. Disable it.
-Go through the procedures I mentioned in my 1st post.
Oh and make sure you have internet access. I'm not 100% sure if internet access helps, but it could help with the drivers.
Even though I just got my 8525, I don't mind helping someone
tried that. no go. I think i'm going to just have to get a new phone.
Did you try disabling the Advanced Network Functionality?
START -> SETTINGS -> CONNECTIONS -> USBtoPC
Yes. when I do that it makes windows see my device, but windows does not know what my device is. Thats why I think some sort of driver might be missing, but I don't know how to fix that.
branden7 said:
Yes. when I do that it makes windows see my device, but windows does not know what my device is. Thats why I think some sort of driver might be missing, but I don't know how to fix that.
Click to expand...
Click to collapse
So... with the RNDIS checkbox UNCHECKED and your FIREWALL OFF, you get the USB Device not recognized error? In that case, ENABLE it and look at these other settings:
1. In the PPC open ActiveSync, then select Connections... from the menu and make sure the Synchroinize ALL PC's using this connection: USB option is checked.
2. In Windows (XP) check your ActiveSync connection settings (see image).
3. Did you try the AS 4.5 Connection Trouble Shooter?
4. You should also try another computer, just to double-check.
There is no driver to make AS work, AFAIK. Question: What happens when the RNDIS checkbox is enabled? Does Windows report an error or simply doesn't connect?
Tried all of those things, still device not recognized. I do need to try another computer but unfortunatly do not have access to one.
When i click that RNDIS checkbox nothing of interest happens. If it's clicked on when i connect windows very briefly see's the device (although it's not recongized) and then the little symbol for unknown device on my taskbar dissapears. If I then click it off windows will again see the device and the little symbol on my taskbar reappears, but it still doesn't recongnize the device.
Wow. That's a strange problem you have there. At this point, it could be a hardware issue. You could try installing WM5Storage or CardExport just to check if the USB hardware is working (bad cable?). Also, try checking your PPC registry, specifically, HKLM\Drivers\Usb\FunctionDrivers. It should look similar to mine (see pictures attached). I believe these keys tell Windows what to do with the device when connected thru USB. Other than that, try a flashing a new ROM from the SD Card, something like VP3G's which is known to work correctly.
Branden,
I have this problem from time to time. My solution is as follows: make sure the usb cable is connected to both the phone and the computer, even though you are getting the unrecognised error message.
Reboot the phone (soft reset) while still attached to the usb cable. Do not rush anything. Input any unlock passwords when prompted by the system but be aware that booting up can be slow, so give it time.
Once the phone has booted up you should then see activesync kick in. You may have to try this several times before it works but it always works for me.
One thing I would advise is to disable/deinstall any auto locking software, eg S2U2. These tend to kick in on long synchronisations and throw the usb status out.
Hope this helps.
WB
Hi! You didn't by any changeuse memmaid or something to clean up the notification queue? (if this sounds like gibberish, you probably didn't) Let me know!
branden7 said:
Tried all of those things, still device not recognized. I do need to try another computer but unfortunatly do not have access to one.
When i click that RNDIS checkbox nothing of interest happens. If it's clicked on when i connect windows very briefly see's the device (although it's not recongized) and then the little symbol for unknown device on my taskbar dissapears. If I then click it off windows will again see the device and the little symbol on my taskbar reappears, but it still doesn't recongnize the device.
Click to expand...
Click to collapse
Same Problem
Just to let you know your not alone ...
I am having the Exact same problem at the moment .... fortunately i do have access to another PC ... My Laptop connects to it with no problems what so ever .... so it obviously is a PC issue and not a Phone issue
I too have tried all the currently posted attempts at a solution to fix it but so far nothing has worked ... i am beggining to think that i may have to do a fresh intall of XP and that would Phiss me off
So any further suggestions would be doubley appreciated
Tried everything mentioned since my last post and still nothing. Also I am now getting the white screen issue again (Which I fixed originally by buying another hermes that had a crushed usb port and swapping the screens out). I think I may be about ready to move on to another phone as this is now my third major problem with this model of phone (although one of the problems may be an issue with XP).
I had the same problem. I updated my WM5 to WM6....and it stoped syncing with my computer. Went back to exchange it. Later, I learned it wasn't the problem with the phone syncing.....here's how you can fix the problem.
Click on Start>Settings>Connection Tab>USB to PC
Uncheck "Enable advanced network functionality"
Click on "ok"
I just upgraded to wm6 again and followed these steps....now it syns fine.
It worked for me.....hopefully it will work for you.
Peace
I am having a problem syncing with activesync, and i must think the problem is due to a drop i had the other day. It made the miniUSB port...smaller seemingly, although the cable still fits in (be it very snugly now). i can still charge it in the wall, and it shows "connected" on activesync when plugged into the pc and the amber light comes on every time. However activesync quickly gives me a message that "synchronization cannot be completed successfully, please remove device and try again or open the troubleshooter"
I'm not sure if i should just start to look for a different way to back up files via PIM or others and move on without activesync ...flash using microSD from now on? consider replacing the port (not even sure how much effort that is, or if it's possible yet)
Or is there anything simple i can try that i haven't done yet? TIA
EDIT: I Have tried unistalling and reinstalling Activesync and even dl'd latest version of AS again
How about deleting the sync partnership with ActiveSync, reestablishing the partnership and then seeing if you are able to sync?
have you tried syncing via bluetooth, then at least you would know its the usb port that is the problem, you say the connection is tight when you insert the cable, are you sure that nothing else is lodged in there when you dropped it?
well, it doesn't look like there's anything in there from what i can tell...the metal actually looks bent or mangled just a bit. Unfortunately my lappy does not have BT, so i can't try that. good thought though
Well if i was you i would invest in a bluetooth dongle for your laptop ,that way you should still be able to sync, and flash via sd card. That way you will have the problem sorted to a degree. Have you tried flashing another rom via cable btw. You say it connects via active sync. I would do a backup using spb backup or something similar and reflash the device and see if that fixes the sync issue. Try a cooked rom first, if that doesnt work try an original rom.
The only reason i mention the cooked rom to flash first is that it is quicker
I've had the same problem where active sync wasn't recognizing my phone.....that is until I soft reset'd my phone while still connected to pc...usually works for me.
another solution..on phone goto:
Settings->Connections->USB-to-PC->Advanced Network Functionality
on... I turned it off. I haven't had a random disconnect, nor PC crash.
A soft reset did the trick for me.
Dillsnik said:
Or is there anything simple i can try that i haven't done yet?
Click to expand...
Click to collapse
If you have a card reader, copy this - http://toril.ru/pda/akrndisadd.exe - onto the phone and run it there. It works every time my phone decides to stop talking to the PC.
Geoff
I am having Syncing issues, last night, has been fine until now.
Did all the deleting partnerships etc but to no avail.
The phone sync's fine with my Work PC(XP) but at home(Vista) its not,
the error 0x?????107 (from memory, will update when i get home)
Exact error: 0x86000107
Hi,
I am having a strange problem with Active Sync.
When I plug in my mobile with USB and use active sync. it does not synchornise.
I have tried all the options liek chaning schedule, changing the settings and diabling advanced network functionality still I am not able to make the diamond synchronise.
Finally, I download the active sync. 4.5 even then my problem remains the same.
It always shows the message "connected" and fails to synchronise.
thanks for any help..
connecting to activesync, buy no able to sync
Hello to everyone.
I have the same problem with my new Diamond. It have synced in the passed, but now I get the same 1 error and code 0x00089107. Can anyone help to fix it, please. Many thanks Tori
bigsteve said:
Exact error: 0x86000107
Click to expand...
Click to collapse
I had the same error.
Solution:
Just add this:
[HKEY_CURRENT_USER\Software\Microsoft\Windows CE Services]
"WCESMGR Windowplacement"="0,1,-1,-1,-1,-1,0,0,0,0"
in windows xp registry.
Error is no longer appeared when I connect t32 (WM6) with my pc.
Doing both things in post #6 worked for my TyTN. This trouble started only after I plugged my phone into a Vista laptop to use it as a modem. Gotta love Vista.... (smile)
Thank you for the help, and thank goodness for this forum!
cristiano67 said:
I had the same error.
Solution:
Just add this:
[HKEY_CURRENT_USER\Software\Microsoft\Windows CE Services]
"WCESMGR Windowplacement"="0,1,-1,-1,-1,-1,0,0,0,0"
in windows xp registry.
Error is no longer appeared when I connect t32 (WM6) with my pc.
Click to expand...
Click to collapse
I have Vista Home Premium....
try pluggin your mobile directly into a usb port on the back of your pc and not through a hub
mine did this now it works 100% of the time
bigsteve said:
cristiano67 said:
I had the same error.
Solution:
Just add this:
[HKEY_CURRENT_USER\Software\Microsoft\Windows CE Services]
"WCESMGR Windowplacement"="0,1,-1,-1,-1,-1,0,0,0,0"
in windows xp registry.
Error is no longer appeared when I connect t32 (WM6) with my pc.
Click to expand...
Click to collapse
I have Vista Home Premium....
Click to expand...
Click to collapse
I have Vista Ultimate 64 and I usually resolve this just in the way I posted in this thread http://forum.xda-developers.com/showpost.php?p=2827500&postcount=7
Best Regards