Just recently when I try to open Notes the 'egg timer' comes on and effectively hangs the Universal.
I am sure I read a cure for this somewhere just cant seem to find it. It either related to deleting a file or recreating a file (*.vol) perhaps?
Does the pim.vol file contain info on Notes or is there another database that might need to be rebuilt.
Help!
Thanks!!
Clive
Related
Hello.
I have installed the IIWPO (theft protection) program manually (not in ROM) for testing purposes. After uninstall an error message appeared periodicaly. The error txt is "Cannot execute \windows\IIWPO_main.exe". Also I can not find any reference to this file in the registry (maybe faulty registry editor, PHM ?) or in the startup folder. Also tried searching in the file contents on entire device. No success. Please, help, this error message is pissing me off
might be late, but...
I had the same problem. It seems that the IIWPO_startup.exe writes an additional string somewhere (*.dll?) which forces the program to start. Btw. this means that it is not necessary to put it into the AutoStart directory, it should be enough to open it just one time after the installation.
Until someone finds the destination of this string there is a simple work around: just put a program file you always like to execute at startup (e.g. ClearTemp.exe) into your windows directory and rename it to IIWPO_main.exe. This will help :wink:
p.s. hexediting of the startup and main.exe does not solve the above mentioned problem but gives your iiwpo files and registry settings the desired personal touch to remain undiscovered
I uninstall my IIWPO easily. All you need is to reverse all the steps you followed during installation.
Remember to delete the line from config file in extended rom followed by a hard reset
Of course a HARD RESET will also solve the problem :lol:
I'm having this same problem....any solution yet??????
The reason for this is in the windows registry there is still a link to the program causing it to start. Use a program such as memaid which will find all dead links and delete them i had a problem similar to this with another program. Memaid solved it for me, hope it works for you also
The reason for this is in the windows registry there is still a link to the program causing it to start. Use a program such as memaid which will find all dead links and delete them i had a problem similar to this with another program. Memaid solved it for me, hope it works for you also
Thanks for the advice.........
unfortunately.............I tried memaid...........but it didn't solve the problem.....
anyone else?
Registry key location would be somewhere like HKLM to startup applications. Hard reset will definitely solve your problem.
Do check out www.cartystudios.com
I am having a problem getting my contacts to show. When I view a contact, all I see is a blank "Summary" page (tab). On the Notes tab, I can see whatever data should be there.
I had problems with ozVGA until I discovered that I needed to use the .92.DLLs that were on this site and not on the ozVGA's author's site. When I did copy these .92.dll files into the windows dir, all seemed great. However, at the end of the copy process, I had a pop-up that stated something (unknown which file) could not be copied and that either I ran out of space or a file was Read Only/ In Use / ROM or something to that effect. I checked each .92.dll file and all seemed fine as far as the RO attribute being off.
Does anyone have a clue what might be causing this? I was thinking outres.96.dll might be the culprit. Any ideas?
Here is what I think is important to know:
ROM info below in tag.
VGA via ozVGA (http://oz.sciox.org/OzVGA053.zip)
Started with VgaRes.zip (http://oz.sciox.org/VgaRes.zip)
Ended up putting VGA 1824 071105.zip on to fix lost and altered icons.
Thank you,
These are not the correct files. There is another zip on the FTP server named VGA_AKU2.zip. If I remember correctly it's in the
ftp://xda-developers.com/Universal/Tools_Programs/ folder, but I can't get to the ftp server at the moment but you'll find it.
joannaex said:
These are not the correct files. There is another zip on the FTP server named VGA_AKU2.zip. If I remember correctly it's in the
ftp://xda-developers.com/Universal/Tools_Programs/ folder, but I can't get to the ftp server at the moment but you'll find it.
Click to expand...
Click to collapse
Thank you very much, Joannaex!
Contacts shows blank
I had the same problem with blank contacts because I had issues with Voice Command. There was a suggestion to replace the outres.96.dll file with a newer version. When I did this, i started to notice the problem.
I'm assuming that this file is specific to the hardware you are using, maybe that is where I messed up. I am using a rare Benq P51. I tried renaming outres.96.dll to something else, then reboot the phone hoping that it would recreate itself. It did!
Tried contacts again and it is fully functional.
Hope that helps.
Hi,
Every time i click OK on a link inside an email, i get:
"The file <web link URL> cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file."
Is there something i need to tweak to be able to open up a link sent to me in email?
Thanks!
same issue
I had the same issue. I think in my case Opera had messed up my file assoiations. Never could get it back though or was able to fix it.
Application path in registry...
I had the same problem after installing Opera 8.6:
You take a registry editor (e.g. Resco Explorer 2005) and go to the registry entries at:
HKEY_CLASSES_ROOT/http/Shell/Open/Command
Whatever is in there should point to your opera browser. Most likely you did install it on the storage card, so make sure the full path to Opera is in the value field. And do not delete the "%1" at the end of the value field
Same can be done for https/Shell...
Regards,
Apple*
Hello all!
Sorry for this newbie question, but I couldn't find any answer in here to this strange situation.
I have put couple of files under 'My Documents' and now I cannot delete them (or move/rename etc.). Also I cannot add any files into this folder (or any sub-folders).
------------------------------------------
Cannot delete 'xxx.mp3': Access is denied.
Makes sure the disk is not full or write-protected and the file is not currently in use.
------------------------------------------
And no, they are not write-protected or in use, so what is the problem?
HTC TyTn
WM5 (5.1.195)
Storage mem.: 56.96/37.03 (free)
Thanks in advance!
[email protected] so happy with this brick.
Have you tried soft reset and then try again?
click and hold the folder and/or files and make sure you havent set them to read only in properties.
unwired4 said:
click and hold the folder and/or files and make sure you havent set them to read only in properties.
Click to expand...
Click to collapse
Nah thought had forgotten something.
* I have tried both soft and hard reset - no result,
* of course I mark the file first and no they're not read-only.
If you read my description than I'm unable to add any files under my documents as well, not only with deleting them.
I can create a 'New folder' and delete this, but while creating it I can not name it - get an instant error...
Seems to be the typical joy of Microsoft.
Jannes said:
Nah thought had forgotten something.
* I have tried both soft and hard reset - no result,
* of course I mark the file first and no they're not read-only.
If you read my description than I'm unable to add any files under my documents as well, not only with deleting them.
I can create a 'New folder' and delete this, but while creating it I can not name it - get an instant error...
Seems to be the typical joy of Microsoft.
Click to expand...
Click to collapse
I've exactly the same problem since yesterday.
But with Totalcommander I can delete and rename all.
I've restored an old backup, but the error is allways there.
edit:
Now I tried an Hardreset and replayed the backup. The error is away.
Hi!
I'm having the same problem. But I don't have a backup copy.
Also I'm beeing unable to connect thru ActiveSync. Maybe the problems are related. No problems when connecting with W2003, though. I think I will have to downgrade and live with it for the moment beeing..
Any ideas??
Thanks.
scorpio16v said:
I've exactly the same problem since yesterday.
But with Totalcommander I can delete and rename all.
I've restored an old backup, but the error is allways there.
edit:
Now I tried an Hardreset and replayed the backup. The error is away.
Click to expand...
Click to collapse
Hello.
I have a problem with my device, looked at all relevant threads with no success and am hoping someone will be able to help me out.
My device is running all my programs as normal and everything is fine. I want to uninstall some programs I no longer need, but it fails. I tried reinstalling the cab over the installation to see if that helps, but that fails also.
I then thought about just deleting the program's folder and its contents using the standard file explorer. I get an error message saying "cannot remove X: access is denied......be certain the folder is not write protected and not in use"
This message appears on anything I want to do like copy/paste my personal files, notes. I cant rename anything either.
Is there a registry entry to fix this? I'm afraid of a hard reset not solving the problem and then having no registry editor and not being able to install anything on the device.
I hope I have made sense in my post. If you can offer any help,thanks.