Database Users

problem with my pda

PLS someone help me
i update my MDA ,and in the middle of the update my electric was lost
and it´s show only the logo of t-mobile and do notthing more
pls tell me what can i do now :?:

Can you access the Bootloader screen still? Hold Power + Reset + Middle of Joystick
If so, just reflash it

thank for reply :wink: i will try it

help with rom

I have qtek2020i and i tried to update it with some himalaya rom. So now my device is death. Could somebody please help me to find any rom for qtek 2020i that will help me to revive my device to start working again. Tnanks in advance
Marko
[email protected]

Re: Rom for 2020i
Hi,
This post has the info you need.
http://forum.xda-developers.com/viewtopic.php?t=27676

still not working
Thanks for help I downloaded both files ant tried with mautupgrade_noid twice as it says but still get a probblem with upgrade starting. When stage1 of upgrading starts with "erasing old ro" it stays on 0% and don't want to start erasing. after few minutes show error and says reset and repete. Is there any help or experiance. My qtek 2020i stills dead

fine
I did solve my problem with few trials with maupgrade_noid from magicians ftp site. Thank You a lot onse again for the help
Marko

It was a pleasure to help, glad your PDA is working again. Makes you sweat when you hold an expensive dead lump of metal.... LOL :lol:
DAz

[Q] hw 6910 help to exit TEST MODE

Hello, I have put my pda hw6910 in test mode, on the screen:
SERIAL
HP
VG.39
And now not as(like) extracting it, I have tried an erased(smeared) general but nothing, it(he,she) returns again(afresh): (some help?

On the hw6915 I leaved serial mode through "hard reset" (Red_Phone+Green_Phone+On/Off+Reset)
-varix-

Already I have tried(meant) it and it does not work

please help, dont work hard reset, CLEANING OK, and enter serial

help please,

Fix
Hi put the ppc in the base and execute the program uni_exitbootloader

dont work any solution?

just reflash
reflash your device (it can be done in test mode too...)
umph.. if you do not have nbf files then it could be difficult...

is vodafone uk ipaq 6910, in hp dont have flash for vodafone ipaq, and the vodafone page, Neither.
in hp i have the hw6910 but for free ipaq, not for vodafone, and say error in ID
heeeelp

Why not just call HP support? Just hang up some lame story that it 'just' happened.
Unless the phone is stolen, this shouldn't be a problem, and if it is, you don't deserve to be helpen .

Thanks
Wow, I really love this forum. I always find the solution here.
Getting out of the bootload screen worked:
(vchumacero)
Fix
Hi put the ppc in the base and execute the program uni_exitbootloader

vchumacero is the best
vchumacero
thanks man , you made my phone work again , thanks thanks thanks
you are realy expert bro

HP 6910 problem
screem hp
logo hp
vG. 39
i make reset hard and reset soft, not start
download uni_exitbootloader
problem not conneted usb
please help me!!!!

Is any can made hw6910 to WM6.1 or 6.5```
I have exhausted all local failed to find!
Any one help`

thanks!
deadlock1981 said:
Why not just call HP support? Just hang up some lame story that it 'just' happened.
Unless the phone is stolen, this shouldn't be a problem, and if it is, you don't deserve to be helpen .
Click to expand...
Click to collapse
wow this was very helpful for me. i did just what you told me and BAM! it worked! thanks
- its one thing to be stupid, its another thing to spread it

hw6915 help!!

I have made my worst error in my life i think... i was trying to update my rom.... but ...
First my HW6915 with a great hp logo wich says "hp invent, vG.39" and in the top something that says "serial" or "usb" when i plug it up.
I try to fix it with i know .
But now ....black ......with nothing
I have reading all the things you talked and having no idea .
i asked someones help..How can i do!
Do i have something to do ??? Has my ipaq chances ?...
PLEASE HELP ME !!!!

still in trouble with your 6915?

wikidorg said:
still in trouble with your 6915?
Click to expand...
Click to collapse
Yes ,it's still in trouble. what can i do.....

can you make a hard reset?? by pressing simultaneously the five buttons : power button, camera button from left side, green "send" button and red "end" button from keypad and the soft-reset button (using your stylus)... ? (i was tired first time i wrote the procedure, my mistake!)
or, perhaps, enter bootloader by pressing simultaneously the two front buttons (the left and right of the keyboards joystick) and the soft reset (using your stylus)
if ok, you'll have that screen again, showing vG.39 on bottom, and "serial" or "usb" on top...

Helo !
You can try hard reset, bat not in the way wikidork was told you. You must press POWER button, GREEN dial button, RED stop button together and then pres RESET with stylus. If this wont work then try with bootloader mode like wikidork told you. When you are in bootloader mode try to upgrade with French ROM and then with ENGLISH one like i did. This must work.
Best regards,
Drahtman

NO use.

Always black

that means you accidentaly broke your hp's bootloader... unless you have some knowledge on dealing with JTAG-related operations, it seems useless to try other software miracles...best advice : sell the rest of your device or buy a similar hp with broken display from e-bay, in order to change the mainboard... or send the dead ipaq to some professional service...
regards

Pls Where is french rom?

i hope recuperate hw6915... pls help
i have hw6915 and now appears on screen SERIAL and vG.39. I tried write rom with ruu.exe and .... "code 203: UPDATE IS INCOMPATIBLE
This version of the Update Utility is not compatible with yor iPaq.. bla..bla.. bla
This Update: Model ID: hp iPAQ69(0,5)
Language: ALL
Your Device: ModelID: hp iPAQ hw6915
Language: WWE"
anybody can help me?
my email is [email protected]

Hi,
Here is the link of French rom:
http://forum.xda-developers.com/showthread.php?t=337975
Try with Orange one.
Best regards,
Drahtman

hw6915 german to spanish
Hi. Please I need your help because I don't now if my PDA is broken, I tried to change the language German to Spanish the realized steps have been the following. - hw6915_up_2_spanish_flasher
when the installation process finish (I'm not sure if I disconnects the PDA from the base before finish the process because now on the screen appears the following.
Serial + hp + vG.39 but change when I conect it to the computer to : USB + hp + vG.39
I don't now what is the next step to load spanish rom I have the archive but how I have to do it because when I conect the Hw6915to de computer to charge the rom after one minute appears error.Pls what I can do but the thing is that now the PDA is inoprative NO GERMAN - NO SPANISH.
please can you help me to repair or finish the process.Thank you very much in advance for your cooperation. and sorry for my bad english
[email protected]

Hanged up no hard reset possible

Dear friends:
I hope you can help me with my problem. I have a wizard (K Jam), G3 using TauRho 5.1 WM6 rom. The thing is that my phone´s send button doesnt work. Two days ago I was instaling one trial and when i tried to get the back up, it hangs while booting and never recover. The problem is: I need to hard reset and the final button is not usefull to confirm de secuence.
Does anybody knows the way out?
Thanks and sorry for my poor english