Hi every body!
I have a Qtek s200, but when i tried to upgrade its Rom, unfortunately until now it can't start normally. if I plug to AC, I can switch it on bootloader mode(only bootloader mode), but when I plug to my computer, I can't switch it to bootloader mode, so I can upgrade rom .
Can You help me?
Related
lastnight when i downgrade from WM5 to WM2003SE without having sd image, i used typhoontools to flash the bootloader from the french orange rom then reinstalled the lastest Qtek 8020 rom under bootloader mode. everything seem going well.......BUT when it get to 100%, the phone restart itself, and on windows saying something like "Successfully............you may now retart your smartphone....."
after the phone restarted it go straight to the bootloader mode (3 colors screen) and i try to hard reset........it dosen't work.....
then i try to flash the rom again........same thing happen
Could anyone have any idea??? plz help me..........otherwise.........my phone will never be able to use..
many thanks in advance
need help for bad flash
qtek 9000 , try upgrade with rom o2 wwe , during the upgarde my pc crash and shutdown, the qtek is on boot mode, a this point , i , STUPID, disconnect the cable from pc and reset the device , ORRORE eSTUPIDO che sono. :evil:
The phone boot and freeze on splash screen o2 . exist one recovery procedure for reflashing the device??
try maui bla bla for reflashing but don't find device!!!
try left , right + reset but none
HELP ???
Put the Qtek in BOOTLOADER mode. (Light-power-reset) and restart flash procedure.
I recently bought a german QTEK S200 and upgraded to latest Dopod ROM that is available in ftp.
I used lokiwiz and awizard tools to return to an older JAMin ROM that did not work as you very well expect.
Than I realized that I am unable to hardreset or put the jamin in bootloader mode. I am sure that before ROM upgrading I was able to do so; but I am not sure when the problem started. I mean whether it happened before using above tools or not. I am able to upgrade with dopod ROM one after another that makes the device enter bootloader and hard reset afterwards but manually I can not.
The cam and conn man buttons and soft reset all work alone but not in combination. I tried to wait for 5 to 10 sec before I take the stylus out of the hole but nothing changed. Aso the exe file enterbootloader is under windows and when I click it the device enter bootloader. Any comments?
Also is there a chance to have a QTEK German ROM with AKU 1. If so I will try the assumed but not proven method to downgrade to a lower ROM with prophet (which worked with wizard with a custom ROM).
Cheers.
After flashing the same Dopod ROM one after another the device started to enter bootloader :shock: and after a few more flashing the device can be hard reset as well. 8) No need to tell that I very happy
Bootloader mode in PROFHET (JAMin,S200 etc)
Hi ppl.
I suggest you to use cradle with 5V (1A) original charger or give 5V voltage to device externally.
By the way: to get prophet in Bootloader mode u need to hold continuously Cam and Power buttons.But u should do this with 5V (1A) voltage.
Thats all.
Neither with USB cable nor with the external supply the device does not enter bootloader mode by your method.
Also known method (cam button + reset) does not work with external supply as well.
Unable To Hardrst And Put In Bootloader The Prophet
Im not sure if this helps anyway i assume you can get to the OS executing EnterBootloader from an SD card or device memory did take me to the tricolour screen. on an SPV M600
Hi,
after the download new ROM my MDA was fired!!
First I download a customized ITA rom and after, because the MDA work very slow, I downloaded the latest T-mobile ROM.
Now the MDA do not power up and do not charge the battery.....sems dead.
Can I recover it?
just an idea but I would start by trying to charge it with the wall plug that came with it, not a computer usb cable - if the battery is all the way dead it will not charge from the computer. If the light comes on, let it charge for a while and then try it out. If not I would try to hard reset while it is plugged in. If none of this works, enter bootloader mode and then connect it to the computer, and hopefully it will go into bootloader mode and you can flash a new rom.. If you need more details on how to do any of this, let me know, and please let me know if it works!
Hi....you fine.
I have recharge the battery and dowloaded the original Tmob rom.
Now is strange..
Same time power up...and same time no.
The ipl is 1.06 and spl is 1.03!!
My Qtek 9100 is dead also. I have the 2.24 ROM and it has been running great. I cant power it on and the light doesnt turn on when its plugged in. The battery is definitely not dead. Suggestions? TIA
try this...
try the suggestions listed here
however be warned that any of these will delete any and all data that may or may not still be on your device and restore it to just the fresh ROM...
Hi,
I have flash the rom 1.6 Tmob (IPL 1.06 SPL 1.03) but the MDA restart in loop mode!!
My phone powered up today. It's been sitting on my night stand for a week and it turned on today! Everyday I have tried to turn it on but I haven't had any luck until today...weird!
cingular 8125.
I need the original rom file (original firmware )can anybody help plz right now my fone stuck on the RUU mode can anybody help
If it is realy a brick without any chance of life I need a part of it: the keypad.
Thats really rude.
not a complete brick yet
not a complete brick yet is in loader mode red,blue ,green screen
All the cingular roms are here ftp://[email protected]/Wizard/Roms/Cingular/
user name xda password xda
which rom do you have?
It looks like you are in bootloader (multicolored) mode so that is good
connect via usb - you dont need to activesync to update rom. You should get a usb sign bottom left of screen and then start update.
Upgrading without activesysnc
After a interruptus ROM upgrade my s200 d'ont start . after the HTC i have a white screen but not more.
The activesync don't connect and i can't put the ROM another time.
I obtain the multicoloured screen with usb in the left botton.
Please, could anybody help me to update the rom in this situation , mayby without activesync ??
Regards.
You can flash a rom from the 3-colored bootloader mode (hold voice button when turning device on). When it says usb you can just flash without activesync.
Yes thank's i found a ROM that don't need activesync , after that i had changed that rom by my rom and at the moment my s200 y ok.
Thank's.