o2 exec ,shut down itself - JASJAR, XDA Exec, MDA Pro General

I got o2 xda executive for very short period but I found problem that my phone does not standby and always shut down itself within one or two hours even power button press , my machine is still not working at all . The last chance is just plug in usb adapter for restarting again and again ,anyone gives the comment.
Hard reset doesn't work , I did that!

Sounds like a dead battery to me.

Related

02 Xda Hard reset every few seconds and no charge

I have an 02 XDA IIs on 2003 updated to most recent software for 2003 via o2 site etc
Ok so I took my PDA away for a few days over christmas and the batterry ran down, and I had forgot the charger so obviously it wouldnt turn on.
I got home and put it in the charger cradle, and it wanted to do a hard reset, so I went through with that and after a few seconds the screen goes black and it then goes ding and up comes hard reset again.
It does not hard reset at a certain point of setup as if you do the process quicker it will still hard reset say after, 10-20 seconds, usually the same every time I think.
Whilst off the cradle, you cannot even switch it on and no light shows or soft reset does not work.
In the cradle only the above which I described happens...
Any help is much appreciated
Sam England
hi.. seems to be a real trouble... anyway try to re-load the rom on it... use your wm2003 cdrom or dowload from p2p or forum wm2003 on your language, then try to flash the device following on screen infos...
hope this will help,
all the best,
storm
Have you checked your sync port?
Sounds to me like pins 20,21,22 may be damaged in your charger (sync) port, one may be touching the body of the port and causing a short, creating a hard reset. Also this might be the reason why it is not charging. IMHO regards
hi sam england
is your cradle plugged into the wall socket? usb does NOT provide enough energy for the device to 'survive' the reboot. i have this 'problem' almost every time i let i discharge to much.
so plug a good idea is to charge your device with the supplied separate charger.
hope it helps ....
regards ize|man
hardware button problam i think..............
i think that your both hardware buttons softrest and power swich are jam or lock thats why it doesn't work and because of them the phone get hardreset when ever you plugin charger or cradel
if you want any help about hardware of any htc products plz connect me on my e-mail id
if you have a cradle with the battery charger, take out your battery, charge it, and put it back in the unit
It should get through its start up routine

my SPV M3100 has gone dead

My SPV simply does not turn on today. Last night it was working OK. I did not drop it or even cherge it!
It sounds like the battry is flat but when I plug it to my computer or direct to the power supply nothing happens and the device remain dead. I have tried hard rest, soft reset with combination of power and camera button. No Joy! Do you mind to instruct me on what on earth might have happened to my poor SPV? Waiting for someone's kind instruction. Cheers
What level was your battery at ,the charging circuit is notorious for being flaky.the charger outputs 5v+/- something or other,it may be possible to jolt the circuit back to life by using a 6v charger,a universal one would do.go to orange and ask to use another battery.if all else fails is it under warranty?
good luck
have a look at this link
http://michael-channon.spaces.live...._c=BlogPart&partqs=cat=Hermes+Charging+Issues
I am affraid the problem looks more complicated since I checked the battery and it is full! I have even tried to over charge battery but still no luck! I am really confused here because I have done nothing wrong with the phone whatsoever.
Can anybody think about some other possibilities?
Many Thanks.
m_anoush said:
My SPV simply does not turn on today. Last night it was working OK. I did not drop it or even cherge it!
It sounds like the battry is flat but when I plug it to my computer or direct to the power supply nothing happens and the device remain dead. I have tried hard rest, soft reset with combination of power and camera button. No Joy! Do you mind to instruct me on what on earth might have happened to my poor SPV? Waiting for someone's kind instruction. Cheers
Click to expand...
Click to collapse
Very curious - a couple of things:
1. You mention a soft reset (which is stylus in hole) but you mention camera button.
2. You mention hard reset (which is simultaneously press the two soft keys on dpad and stylus in hole) Try this again if you were using a different key combo. (camera key not used for this)
3. You may have tried but Iwould leave the battery out for a good period - even overnight and then re-try.
Mike
Cheers Mike, I left the battery out for almost 15 hrs. still nothing. I have even tried hard reset, 10 times
m_anoush said:
Cheers Mike, I left the battery out for almost 15 hrs. still nothing. I have even tried hard reset, 10 times
Click to expand...
Click to collapse
What are you pressing to get a soft reset, is it that little round hole in the bottom?
Hard reset is where you press the two - buttons above the green and red phone buttons whilst pressing reset.
So you've tried the resets and they don't work. When you plug it into the computer or charger, do you get any lights on, even breifly?
I notice you're on Orange UK. I would advise you call up Orange Customer Services (I know, a pain on a landline or non mobile ) and explain to them that the phone does not switch on, reset or anything and you think it's faulty. They should have one out to you in 24 hours under either the warranty or care plan.
If you have the insurance though they'll charge you £15 for the delivery costs
Good luck
Thanks for the instruction. I am affraid I am outside UK at the moment. That is why I am desperate to find a solution since I have got no phone available. Regarding your question about the light, I am affraid I get no lights whatsoever! even when I connect it to the main power supply.
sorry bud but it sounds like its kaput,you could try one last thing remove battery and place phone in zip loc bag/freezer bag and place in freezer for an hour or so ,did you try a new battery as they form an integral part of the charging circuit if its damaged,even with residual charge,it may prevent phone from powering

Atom life problem!

Hi All!
I have an atom life PDA and it was working fine with WM6. I used to play with it on the week ends and all the other days it was kept power on after fully charged. About one month ago, in a week end when I checked the PDA it wasnt power on again. First I thought it was a dead battery and I recharged it hoping it will be ok. But I couldnt get the atom power on again. Then I bought a new battery and tried again, but problem was the same. Then I tried to power on the set while connected to the AC charger and it worked this time. But, it was slow to boot and screen looked as if the colours were faded and the resolution seems to be less than the original. Tried soft resets and hard reset several times but the problem still exists. I ran the self diagnostics and it detected one fault and it was telling that firmware for radio module was crashed. If I go to the power settings it tells the battery is LiIon type, but the power remaining is displayed as unknown. The onlyway I can get my atom power on is when it is connected to AC charger, not even by connected to a PC via data cable.
Now...does any one know why this happens or any suggestions?
Sorry about my long question. But Hope it is helpful if any one wants to help me. Please help me....thanks in advance!
i think better u reinstall rom.
download at http://seeo2.com which is standard rom windows mobile 6.0
for more lasted version, u can see from forum which version 6.5, more colourfull and like iphone.u can ask for senior member. they know step how to make your atom life okay.

[UPDATED & SOLVED] Auto shutdown...

Hello guys, i have got a problem with my prophet (Qtek s200 version).
I open it all it's ok and 10-20 minutes later the phone is off...why?
Example.... i was listening music and suddenly the phone get closed and the 1st led at the top of the phone flashes orange one time. When i puss the power on button it will flash again orange and the phone will boot...Any ideas? I tryed Hard reset but there is no difference.
Thanks and sorry for my bad english.
Any ideas?
remove all the parts (sim, SD, and the battary) for 5 min or so and start with new other charger and get sure that it worked good and start to charge the device without open it and c
well...
1. Is you battery too old?
nope i bought it a year ago... i found the problem...(i think) i charged 4-5 times while it was at 30-40%...now i'm trying to fully uncharge it...
I will tell you if i have another problem...thanx
The same guys...do you think it's battery?
Is the same when the power is connected?
i'll try it and i will thank you...check thread again 1-2 days later
Guys it's the battery..i tried with power pluged on and it was ok, i tried another battery and it's ok...

My Uni doesn't boot.

Hello.
I have big problem with my Uni. It's not booting, it's not going to bootloader mode. When I connect Uni to computer the red LED blinks and nothing happen. Battery works in other uni.
hmm leave the uni on the charger with battery in.
also have you tried using another battery in the dead uni?
same problem
I have the same problem during upgrading to wm6.5 computer gave me an error message
i pressed the reset button and the unit went blank
now its dead whatever i do notthing happens bootloader keys , hardrest keys , reset buttons nothing happens
if i connect to the wall charger to the unit nothing happens
if i press reset button red light blink once and if i remove the battery and connect the pda with the charger red light remains on
please help
I connected the unit with charger for whole night hoping it will work but nothing happened even the battery is cold ?
holy **** me too. i borked my sd slot so i took it apart, just popped off the back and fiddled with the sdpins and now it refuses to boot+redlight.
any thoughts? i miss my phone -_-
Hi
I noticed if i connect the device with my pc the red light flushes time to time and the pc gives the error of usb device not recognized please help I miss my o2 exec.
many thanks
keyfetcher said:
Hi
I noticed if i connect the device with my pc the red light flushes time to time and the pc gives the error of usb device not recognized please help I miss my o2 exec.
many thanks
Click to expand...
Click to collapse
did you try another battery in your uni? also did you try tapeing the pin on the battery that reads the voltage level?
according to the universal service manaul flowchart, a redlight indicated bad battery>bad battery pins>shot motherboard.
so i don't think this is good. anyone got any..thoughts on figuring out WHAT exactly happened?
Hi
thanks for the input
will you please guide how I can tape the pin on the battery that reads the voltage level
many thanks
help
I have upgraded my xda exec from wm5 to wm6.1 but later decided to upgrade by downloading this upgrade from xda developer site " BA_6.5.23004.WWE-xplode-R7.1"
during upgrading it reached to 75% and then my pc gave me an error message
unfortunately i continued and later on a gray screen appeared on the xda exec
i pressed the reset button and the unit went blank
now its dead whatever i do nothing happens bootloader keys , hard rest keys , reset buttons nothing happens
if i connect to the wall charger to the unit nothing happens
if i press reset button red light blink once and if i remove the battery and connect the pda with the charger red light remains on
I connected the unit with charger for whole night hoping it will work but nothing happened even the battery is cold ?
I asked my friend to check the power in battery and he said its charged
I dont know what is wrong ?
please help
keyfetcher said:
I have upgraded my xda exec from wm5 to wm6.1 but later decided to upgrade by downloading this upgrade from xda developer site " BA_6.5.23004.WWE-xplode-R7.1"
during upgrading it reached to 75% and then my pc gave me an error message
unfortunately i continued and later on a gray screen appeared on the xda exec
i pressed the reset button and the unit went blank
now its dead whatever i do nothing happens bootloader keys , hard rest keys , reset buttons nothing happens
if i connect to the wall charger to the unit nothing happens
if i press reset button red light blink once and if i remove the battery and connect the pda with the charger red light remains on
I connected the unit with charger for whole night hoping it will work but nothing happened even the battery is cold ?
I asked my friend to check the power in battery and he said its charged
I dont know what is wrong ?
please help
Click to expand...
Click to collapse
I beleive that BA_6.5.23004.WWE-xplode-R7.1 mean blue angel rom. http://forum.xda-developers.com/archive/index.php/t-482997.html
so you are pretty much out of luck unless you can jtag.
again the same problem
keyfetcher said:
I have the same problem during upgrading to wm6.5 computer gave me an error message
i pressed the reset button and the unit went blank
now its dead whatever i do notthing happens bootloader keys , hardrest keys , reset buttons nothing happens
if i connect to the wall charger to the unit nothing happens
if i press reset button red light blink once and if i remove the battery and connect the pda with the charger red light remains on
please help
I connected the unit with charger for whole night hoping it will work but nothing happened even the battery is cold ?
Click to expand...
Click to collapse
...almost the same.
my problem occurred after I did a soft reset. It took it a while to boot and every other time I used soft reset the boot took longer and longer until it did not want to turn on again.
Soft reset doesn't work but when it's left on the charger and pressed, the battery light blinks once. It won't charge and my PC registers a device malfunction when connected through USB.
The only sign of life pops up when I press hard reset but after I press 0 or X nothing happens.
Please help!
I have same problem as well, I even bought spare battery but uni remains dead and silent.
Beside the fact that when it's connected to PC, windows show unrecognized usb device.
what happened before it died? did you ... do anything to it? mines still dead as a doornail.
I am not alone :'(
It means many other fellows are suffering from same.
strange , total silence from experienced guys... atleast they can say it is useless for you to try.. and now dig a grave for it.
Experienced guys have their own lives too
Wait with patience till someone replies you and do not double post on same topic please

Categories

Resources