Artemis and PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap
i tried to upgrade my o2 arte200,i waited 30min. but installation frozen.
i did reset but after reset my phone stucked at bootscreen
IPL : 1.25.0001
SPL: 1.25.0000
GSM : 02.67.90
OS : 1.28.0.0
Please help... i tried hard reset and soft reset ... but no way...
when i plug usb cable activeSync dont recognise phone
same problem here,
help needed in advance
Active sync is usable only with Windows booted device. If Windows isn't able to boot, you must enter into bootloader, plug usb cable and then start rom flashing.
hi sir
i entered bootloader screen,connected usb cable ... (i can connect using mtty)
i run the software "CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE"
but gets an error message " cant connect to the phone"
WHY ???
finally i did connection ...
but goes %3 and gives error message
ERROR 294 INVALID VENDER ID
this update utility cannot be used for your PDA Phone.Please check your update utility ??????
CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
is a Rom for the Wizard not for the Artemis.
You need the original ROM so you have to search for the O2 ARTE200 ROM. The language of the ROM has to be correct as well.
how do you get the phone into the bootloader?
Tha said:
how do you get the phone into the bootloader?
Click to expand...
Click to collapse
Press and hold the record button and then do a reset.
no it doesn't work
My DOPOD was in the same trouble. I got the same vender ID error. Does anyone know where to get the original DOPOD P800 chinese ROM?
The same problem has I also.
My ROM upgrade ended bad. Test of installing of different ( I have already them probably 12) the INVALID ends VENDOR ID
I it can not now to remove CID nor to find out what it has it CID HTC__001 does not it fit. T - MOB 005 does not it fit.
I look for original romu from Dngaard ( DK)
Someone knows what CID maybe it is in HTC 3300. I have HTC P3300 is distributed would to Dangaard.
Where from him download
I greet
Irek ( POLAND)
im having the same problem on the o2 orbit ( need a orignal rom
upgrading
hai i am stuck in o2 orbit flashing in bootloader mode
help needed urgent
i got it working after i found the original german rom...loaded the orbit into the bootloader screen with 3 colors....plugged in the usb cable..then ran the german rom, after a few mins it reset and the orbit loaded up...after that i followed these steps to get it into english
http://forum.xda-developers.com/showthread.php?t=290241
flashed it with the tmobileuk 1.13 shipped file. everything is ok now.
cbprod said:
i got it working after i found the original german rom....
Click to expand...
Click to collapse
Where do you find the orginal rom?
Please help us!
send me a pm with your email, i'll send it to you
got mine back from the repair center friday.
no cost at all, fixed
route said:
finally i did connection ...
but goes %3 and gives error message
ERROR 294 INVALID VENDER ID
this update utility cannot be used for your PDA Phone.Please check your update utility ??????
Click to expand...
Click to collapse
could you tell me how did you manage to conect your phone? i have the same problem and i can't get my palm recognized by windows...
you must go into the bootloader.
i´ve found the orginal o2 rom and now it´s working fine with wm5.
i wait for the o2 official wm6 update (i read something about may).
xister said:
you must go into the bootloader.
i´ve found the orginal o2 rom and now it´s working fine with wm5.
i wait for the o2 official wm6 update (i read something about may).
Click to expand...
Click to collapse
is that the o2 UK rom or the German one
It happended when during copying rom from Pc to PDA and error at 3% everytime. What should I do
spl was unlocked (spl 1.11.0000)
Get the device into bootloader and flash the stock rom.
I had alomoust the same problem but i don`t know how i can get the device to bootloader mode to flash it. please help me
still can not correct the problems, any one can help me?
i try to flash original rom but it has the same error.
vladilol said:
I had alomoust the same problem but i don`t know how i can get the device to bootloader mode to flash it. please help me
Click to expand...
Click to collapse
First turn your PDA off.
Then keep the memo/voicerecorder button pressed while you turn on your PDA. It will automaticly go into bootloader mode. You can release the button then.
Please be advised that when you are using Windows Vista you will need different drivers then Microsoft offers you. You can find it further in this forum, aswell on this site:
http://http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
Don't forget to run USPL before flashing your rom.
btw, please disable hibernate and screensaver. When enabled it can fail your update.
Hope this will work. It did for me.
Hello, i tried to install wm6 on my qtek 9100, first i have followed this guide: http://forum.xda-developers.com/showthread.php?t=298613 , but the wizard_love rom failed, and then i CID unlocked my phone and that worked fine but then when i tried to install T-Mobile 2.26 rom" from the link: http://rapidshare.com/files/38880130..._ship.exe.html an error message comes up after the instal has
reached 1% i think its "error 326: this NBF file can not be used for your PDA phone, please check your PDA file" and then the instal does not continiues. So i installed button_rom again from the gudie and the install worked fine, but when i restarted my phone i gets stuck in bootladder screen (not the 3 colored screen) and there are IPL/SPL 1.01 but i dont came any longer, i tried to reinstall button rom but it´s the same thing, i get stuck and my phone wont go in to windows...
What shall i do??? pleease help me i have just buy this phone for 400 dollars, so i must make it work again, the best is if i get the orginal swedish rom for my qtek 9100 pleeeease help me please
Sincerly yours// Johan
Edit: almost every rom i try to install, it gets stuck and a error message comes upp: Error 326 ( i think) please check your NBF file or something like that, what is the NBF file? and how do i fix it?
i have the rom updater SP3_WWE_2.4.33.11, and i go in all the processes, i am connected with activesync and when it goes to tri-color menu the phone looses activesync connections and it says that cannot have connection and freezes. what can i do? please help.
I've the same problem i sitll can solve it n anybody please help am new here i've no idea what to do. I tried unlocked CID but i couldn't do it put cert.cab in phone n wen i try to install it says can not install or SDA_applicationunlock n I also tried lokiwiz procedure but still can not solve it so please if someone could help me in updating or upgrade my Orange Spv C500 ROM so it would be so nice of .... Waiting for kind reply !
Hello,
I got problem when upgrading mais PDA. my PDA is locked for Orange(France) and wanna unlock it.
I folewed the unlock tutorial , but at the end the phone shutdown after displaying the splash screen. seems that the rom was wrong.
I got ERROR 270 when I try to upgrade with differente rom. so right now, I can not it.
please help !!!
How do you unlock?
What is your IPL and SPL?
It should be 3.10 .
Unlock error codes are located here:
http://wiki.xda-developers.com/index.php?pagename=Elf_RUU_Error_Codes
thank for your replay
I used the USPL tutorial to unlock, but when update the rom I think I used a wrong version.
my IPL SPL 1.16.
my HTC ELF 0100 didn't continue starting.
I tried most solution found on the net.
Wait, what?
You used the wrong version to update?
which is?
I didn't remember exactly, but I have a T-Mobile Splash screen.
the phone shut down seconds after starting.
thanks for help !!!!
any one have an idea on how to recover my phone , please help !!!!!!!!!!!!!!!!!!!
my elf is in 3 color, try mani soft but not work any ideea ?