Hi there
Can anyone make a Splash image with this file that can only be installed.
I can't get it right to make the Splash Image that work on my PDA.
Everytime I restart the old image is back.
Please Help.
unlock extended rom then install again the splash image cab...
[bliss.PNG]
http://forum.xda-developers.com/viewtopic.php?p=129268#129268
I did unlock the extended Rom. But it still doesn't work. I'll have a look at it. Maybe I'm just doing something wrong.
Happened to me the first time too - re-lock the Extended ROM after installed.
Another way is to drop the HimalayaSplashImage CAB into the extended ROM & edit the config file to reference it. Add it as last item.
I got it to work.
Installed extended Rom unlocker, soft reset, then install the splash Cab.
Working perfectly.
Hi,
I have a big problem, i when i started my SPV M650 (Orange phone) 2 days ago it didn't want to start (blocked on orange splash screen) so i made a hard reset and it was working.as i didn't want to keep orange OS i tried to flash it.
As a newbie, i tried to flash it with a HTC Rom without unlocking the CID. and..... didn't work !
Retry : updater says no system at all was installed on the phone then, it had passed by and installed the rom (don't know why)
yap, installed but didn't work! still blocked on splash screen sometimes go on WM6 welcome screen and one time accessed the Windows Mobile.
And one hour later.... black screen !
So, i tried to reflash it in bootloader mode with the original orange ROM, it worked, but still blocked on the orange splash screen and the OS version written on this screen was 1.84.0.0 (it should be 1.84.73.2) and screen was brightening so reflash a second time with that original rom, error 276: update error. Now everytime i start the phone, it is in bootloader mode with RUU written on it (in update process i suppose) and everytime i retry to update, error 276: update error. then tried with SD card: card no recognized and still blocked on the bootloader mode update process.
So,
- is there a way to update or flash the bootloader ?
- has my phone his hardware totally crashed
(because i think orange won't never accept warranty, even in normal way they only accept it when you are dying front of their door, and its not sure if they could kill you just for pleasure they'll do)
Hi I have an AT&T 8525 that I have flashed with Schap's WM6 pro 4.31 lite rom. I am trying to flash back to AT&T wm6 rom but every time I run the RUU it goes to the bootloader then the next screen is a white screen that says "loading..." so I wait to see if it loads slowly but it times out and returns to the bootloader screen. I have tried flashing from the SD card but it does the same thing. I have tried to soft reset then I tried to hard reset but I still get the same message. The utility goes to an error screen saying connection error. Is there anything that I can do to get this to work?
take out your sd card and run the RUU
THANK YOU!!! The fix worked perfectly. Outstanding!!!!!!
Hi everybody,
I tried to free up 8MB out of 12MB of pagepool in my HTC P4350. after some months my device was hanged and I couldn't restore by hard reset. also when I tried to run the RUU via my computer by pressing camera while restarting, the boot and update process will stop on green windows mobile screen.
my ROM version is 4.17.0001
anybody can help?
thanks,
Pejman
are you hard spl? if you are then try flashing via the the sd card method.
I had upgraded my 4350 with HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe by pressing camera on startup. it goes 100% complete, then restart and after white htc screen shows green win mobile, on this section the green signal LED works and the sound of keyboard open/close plays.
just let me know what is the problem and how can I use SD update methode.
Thnx
Hello,
New owner of the HTC Touch HD, and love it!
But...
I was attempting to flash Dutty's WinMo 6.5 R4 ROM. I followed all the instructions, yet now I'm stuck.
Whever I boot the phone, it gets stuck on the black "Smart Mobility" screen. In the bottom left corner, it shows the following info:
R 1.14.25.24
G 52.64.25.34U
D 1.59. dutty
I've tried hard resets, and they don't do anything. I can't connect to Windows Mobile Device Center (ActiveSync), so I can't re-flash any old ROMs.
Any help/advice? Have I bricked my phone?
did you flash the ROM without flashing your SPL to 1.56 (or using USPL)? from the power off position, hold the down-volume key, briefly press the power button and see if your device boots to the tri-color screen. from there, post the values that appear on that screen. if your device boots to the tri-color screen, then you can reflash a stock ROM from your laptop/PC.
jsmith36 said:
Hello,
New owner of the HTC Touch HD, and love it!
But...
I was attempting to flash Dutty's WinMo 6.5 R4 ROM. I followed all the instructions, yet now I'm stuck.
Whever I boot the phone, it gets stuck on the black "Smart Mobility" screen. In the bottom left corner, it shows the following info:
R 1.14.25.24
G 52.64.25.34U
D 1.59. dutty
I've tried hard resets, and they don't do anything. I can't connect to Windows Mobile Device Center (ActiveSync), so I can't re-flash any old ROMs.
Any help/advice? Have I bricked my phone?
Click to expand...
Click to collapse
How long does it stay on the black screen?
it usually takes awhile on first load up to 5 minutes sometimes longer
Can you get into Bootloader? (tricolour screen)
if you can you may have simply had a bad flash it does happen just reflash see what you get, but you need to be patient
You may want to post what steps you took so we can see if you missed something
Well...
cortez.i said:
did you flash the ROM without flashing your SPL to 1.56 (or using USPL)? from the power off position, hold the down-volume key, briefly press the power button and see if your device boots to the tri-color screen. from there, post the values that appear on that screen. if your device boots to the tri-color screen, then you can reflash a stock ROM from your laptop/PC.
Click to expand...
Click to collapse
Never mind, found it...
Not quite...
Well, I've gotten it back to the stock ROM. Unfortunately, I can't seem to flash to a custom ROM. I've tried everything in the Step-By-Step guide. It keeps giving me error message [260].
As much as I'd love WiMo 6.5, I'd rather enjoy using the device.
So I guess I'll stick with the stock ROM for now.
But thanks for the help on getting it working again!
jsmith36 said:
Well, I've gotten it back to the stock ROM. Unfortunately, I can't seem to flash to a custom ROM. I've tried everything in the Step-By-Step guide. It keeps giving me error message [260].
As much as I'd love WiMo 6.5, I'd rather enjoy using the device.
So I guess I'll stick with the stock ROM for now.
But thanks for the help on getting it working again!
Click to expand...
Click to collapse
if my memory is correct, that's a USB error and i believe i disabled USB sync in ActiveSync or WMDC to complete the flash process from my laptop. now, assuming you've Hard SPL'd your device with the 1.56 SPL, which is required for WM 6.5 ROM then you can still flash via the microSD card. in the ROM package you downloaded, you should see a file named BLACIMG.nbh or ruu_signed.nbh. (1) copy the file to a microSD (2) make sure the file is named BLACIMG.nbh (3) put the microSD card in your phone (4) boot your phone to the tri-color screen and you can flash a custom ROM.
My HD also gets stuck on that starting screen "smart mobility".
But i have the problem allways after a past restoring by sprite backup.
If i restore with "merge" the progs installed on the memory card will not start. Progs in ROM are ok.
If i restore with "replace" the HD and all progs on ROM and memory card are working properly. Fine! BUT on the next soft reset the HD will hang in the described starting screen and needs a hard reset of course followed by a new sprite restoring of an older backup file.
It sucks! And i'm not able to save new backups because on the backup process sprite will soft reset the HD.
I have still the original HTC ROM and radio ROM and my storage card is ok.
It must be a sprite problem, or better a problem of the registry modified by "replace"
Any hints?
Couldn't find a solution with sprite backup. But SPB backup works fine.
vincent1 said:
Couldn't find a solution with sprite backup. But SPB backup works fine.
Click to expand...
Click to collapse
restoring a backup from one ROM to a different ROM is not advised, especially if you're flashing with custom ROMs. the backup could be overwriting/adding/modifying registry values that are critical to the new ROM. if you're wanting to quickly reinstall programs, etc., after a ROM flash consider using SHASAMI...
As stated above it is ill advised to perform a full restore after you have flashed to a different rom version as you'll be modifying registry settings which could make your phone not function correctly. Only use SPB Backup, Sprite & Rescop Backup for rstoring emails, contacts and nothing else.
If you are looking to restopre everything safely use SASHIMI