Please
I'm Download from Internet Software .
this software make Hide Of Start Menu
and i don't know . How Start menu Return ?
please Help Me.
Use hh "remove software" option in settings and then soft reset. it should then be gone.
Related
I find this solution for running ActiveSync connected thru BT via one click. I tried it on my MDA Compact and it works.
Hope it helps.
http://www.mtekk.com.au/Forums/tabid/56/postid/14926/view/topic/Default.aspx
On the Pocket PC...
1. ActiveSync / Tools / Options... / Options... (yes options twice)
2. "When cradled Enable PC sync using this connection" 'Bluetooth
3. Startup an ActiveSync connection as you normally would...
4. Now setup a shortcut to the program "windows\repllog.exe" into the Start menu. To do this
a. open up Explore in ActiveSync
b. Go into My Pocket PC
c. Go into Windows folder
d. Find repllog.exe and right click and select copy
e. Go into the Start Menu folder (within Windows folder)
f. Right click, paste shortcut - rename to something like ActiveSync Direct
Back on the Pocket PC
5. Gracefully disconnect ActiveSync.
6. Start / Settings / Buttons
7. Choose Button 4
8. Set the button assignment as ActiveSync Direct (or whatever you called it above) and click OK
9. Reset your Pocket PC and wait about 15 seconds for everything to get loaded (esp. Bluetooth which takes a little while).
10. Press the top left side button. Voila! Easy!
If you get the ActiveSync - "Port Not Available" message, it just means that Bluetooth hasn't loaded yet. Tap OK, check that Bluetooth is activated and if so, try again.
Thanks for the post. Ive been having trouble getting this to work however.
1. ActiveSync / Tools / Options... / Options... (yes options twice)
2. "When cradled Enable PC sync using this connection" 'Bluetooth
3. Startup an ActiveSync connection as you normally would...
4. Now setup a shortcut to the program "windows\repllog.exe" into the Start menu. To do this
a. open up Explore in ActiveSync
b. Go into My Pocket PC
c. Go into Windows folder
d. Find repllog.exe and right click and select copy
Click to expand...
Click to collapse
Im using WM5, and firstly i dont have the option..option menu and secondly when i try to paste repllog it tells me that the file is copy protected or something like that.
Any ideas???
Help appreciated.....
Try to use Resco File Explorer instead of M$ Explorer. When you 'right click' on Windows/repllog.exe, there is 'Send To...' -> 'Start Menu as Shortcut' option in menu.
activesync has only com1!!!!!
hello pda masters!.i try to activesync my ipaq-2490, with usb,can sync.when i try to change com to sync by bluetooth, activesync has only com1, to choose.i have soft reset, my ipaq, (Xmany times), uninstall reinstall activesync 4.01, 4.02 (Xmany times).i eraze registry anfd reinstall, nothing.have you any idea? in the past i could sync by bluetooth, because activesync had com1,com2,com......., now has only com1.please help
sorry if i post in wrong thread, but i am new, and forgive my poor english, (i am from greece)
The best
http://forum.xda-developers.com/viewtopic.php?t=49136
IMHO
help with activesync only com1
every time i install bluetooth usb stack, it uses new com79, com80, now and i cannot sync over bt like i did before.
How can i delete those comports?in device manager under advanced in com1, tells me that from com2-com80 are in used.?????
Any idea, thanks
remove your stack from PC, then delete all com ports except 1 & 2 , use buttons windows + break & install stack again!
in properties of each ports set different com for example com1 , ignore errors , delete free changed one! do so with each wrong port
THANKS A LOT! PROBLEM WITH COM79,COM80,COM81......FIXED
thanx rustoss, you are BIG! i dont unplug usb stack even.....i just ignore all notifications and change my only COM1, to com5, and thats it!.i can activesync by bt again.thanks again :lol: :lol:
I install in htc touch the followings programms
Skype
ewallet
Pocket CM Keybord
sdkCerts + Windows Live 10.6.0034.0800 fixed
Now i go to Comm manager and i press the button for WLAN. The WLAN is dead. When I go to the Setting --> Connections the icon WiFi is disapear.
Please help me....i have bought the mobile 3 days ago with sim unlock,
Please help me
Uninstall everything you can, if it doesn't help, do a hard reset. After installing each CAB, try to use WiFi.
Hi i have the same Problem.
I instlled diverent Rom. Always the same. I cannot activate the Wifi.
What else can i do? Would another Radio Rom help?
I have done many times hard reset but nothing.
archonw? You have install different ROM and still cannot activate WiFi? Have yοu try original ROM?
I THINK I FOUND THE SOLUTION. In folder My Device -->Windows there are some files
There is a file Wrlsmgr. When i open this file then i see something like the Comm Manager. In this programm there is bluetooth and phone button. When i press the button i can activate or deactivate the phone or the bluetooth. I see then that there is no button for WLAN. I go to the files about bluetooth and phone and i see the followings files.
BluethSetting.htm
Bluetooth Explorer
BluetoothSetting.dll
phone.dll
phone.dot
phone.pwi
PhoneSetting.dll
Then I go to the files about wireless and i see the following files.
Wireless LAN
wireless.bmp
WirelessLAN.htm
WirelessService.dll
WLANSettings.exe
WLANSettings.exe.0409.mui
Do you see something strange? I see 2 thing. There is no a file WLANSettings.dll like bluetooth and phone and what is this WLANSettings.exe.0409.mui strange file?
If some want help me please i would like to see if my files is the same as the files in his phone.
Thank you very much
Hello, I have a spv m2000.
I try to instal windows mobile 6.1 on spv m2000, but i can't connect BA to pc in Bootloader mode with windows vista. I try all metods that are describle in ( http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4_Vista ), but i haven't success.
But now, when i turn on device, i see that i loose many programs (PVPlayer, Album, WESTTEK Native Office Viewers and Orange configurations).
how can I return to these programs?
sorry my bad english, but english isn't my motherlanguage.
regards
Well
I dont have vista but in bootloader you dont need to sync it you just need the drivers... maybe your WMDC is not updated... check it out...
I have WMDC version 6.1.6965 and I install drivers for my vista 32bits
can you xplain it?
So... can you xplain where did you get stucked?
maybe the error that the RUU shows you?
or what else... has happening to your device please?
Edit: Xplain all detail please... to see if anybody can help here...
or you just need a XP pc... is suggested to everybody here.
whell, i follow step by step the tutorial.
1. I install xda-developers_Unlocker.CAB
2. Then go to start -> Programs -> ExtROM tools -> then first run "unhide", then "Unlock".
3. Do a soft reset.
4. Once your BA is restarted, locate the Repart_DOC.exe file with your filemanager and start it.
5. Set the size of Extended ROM to 128 kb (which is already the default).
7. I press "format now!"
8. Soft reset your BA.
after I download vista 32 bits (driver)
9. Extract the contents to a folder on your desktop, to "AS_DRIVERS" folder.
10. I put your device into Bootloader mode by pressing and hold the "Power" & "Record" buttons, and then press the Reset Button.
11. Connect the phone to the sync cable/cradle USB;
12. Now navigate into the WMDC (Start -> All Programs -> Windows Mobile Device Center)
* Click on the "connection settings" menu icon
* In the connection settings menu uncheck "allow USB connections" then press OK.
* Now exit the WMDC and return to the desktop
13. Go into the start menu and type "Services", this will take you into the local services dialogue and show a list of all services either running or registered with your pc.
* Scroll down the list and make sure these services are present:
* Windows Mobile-based connectivity
* Windows Mobile 2003-based connectivity
* If these services are not started then double click each one and set them to Automatic start by clicking the "startup-type" drop-down menu and selecting automatic then click the start button in the same window, apply the setting by pressing OK.
* Return back to the desktop again
14. Go into the start menu and type "Device Manager" then run, this will take you into the device manager.
* Click the "+" symbol next to "Mobile Devices" and double click on "HTC USB Sync".
* This will bring up the properties of the currently connected device.
* Go to the "Driver" tab and click "Update Driver".
* Click "Browse My Computer for Driver Software".
* Select "Let me pick from a list...."
* Click the "Have Disk" button.
* Click "Browse" and navigate to the AS_DRIVERS folder we created earlier.
*
Now select your file
o Vista 32bit users select the file "wceusbsh.inf"
o Vista 64bit users select the file "wceusbshx64.inf"
* Then click Open.
* Click next and the driver will be installed (wait a moment).
* Press close and escape back to the desktop now.
---» In this step that i have problems
9. Now we must stop the WMDC process
* Start the task manager by pressing Ctrl+Shift+Escape.
* Click the WMDC line and click "End Process". In the confirmation window, again press End Process.
* Now re-enter the WMDC and re-enable USB connections (click connection settings and check the box "enable USB connections").
my BA doesn't appears in WMDC, i don't have any conection with BA in bootloader mode
I thinks that problem is in extRom.
The BA cannot instalt the extRom program
Hi, I just bought my first mobile with windows mobile system.
At the moment I see from Device Information:
ROM version: WM6.1de LUC WWE.
Well I would like to try different op systems like WM5 and WM6. But I can't find any tutorials for newbies. Also I live in Estonia and I would like to use as a phone, so what about the unlocking? At the moment it's unlocked, but if i flash it, does this change anything?
no it will still be unlocked if you flash it.
Oh good, then I can flash it, right now I have some old data from the previous user and I have some problems with connecting to the operator.
E: I am trying out tomal versions right now, but is there as simple as the tomal installer with wm5.0?
Welcome to forums
Have a deep read to the Wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Good luck and enjoy!
Can I turn off the ActiveSync, so it would not be running when I am not connected to the PC?
Also I was looking at the screen and I saw that couple of millimeters from each side there is black line. So is it possible to switch it to "full screen" or is it normal?
Finally I would like to know how to change the start bar's height and other menu sizes?
For activesync:
To get rid of this, do the following: Start Active Sync on your Wizard, then
Select menu -> select configure Server -> Enter just any name for server - select next - select advance - do not change drop down boxes and select next. Then unselect all check boxes - select finish. Then select menu again - select schedule - For both drop down boxes select Manually. Then push OK button. Now ActiveSync will not restart itself.
Try to use search and read a lot, with that most of your questions will be solved.
hello
i have a jade100
i and tried it to install hardspl(automatic or manual) and i can't
gave me an connection error
i tried it to do a hard reset and neither
i try the tow ways to do a hard reset and nothing
please help
i want to change this ugly stock rom
thanks
first connect to your device with Windows Mobile Device Center then try Hardspl Auto
if you still get a problem, turn off fast usb (start > settings > connections > usb to pc > uncheck 'enable faster data synchronization')