Database Users

Vito voice dialer - downloads don't work - any ideas?

I've researched the voice dialling applications and decided to install the trial version of vito voice dialer.
I initially downloaded the zip file for 2003 mobile edition and then installed it. All went well, recorded tags for my contacts, thought great package, I'll soon be buying this.
Assigned the voice dialer to my calender button and thought it was time to test it out.
Nothing happens apart from "voice dialer" is displayed at the top for 1/2 a second then nothing else. It just reverts back to the today screen.
So, i removed the program and associated files and downloaded the cab file. Installed this - fine.
Exactly the same thing happens (doesn't happen).
I've since downloaded and installed all the available files and the same thing happens.
Anyone got any ideas.
I've loaded and tried the fonix dialer but i had this on my old jornada 928 and I'm still not impressed with it so I'd rather get the vito dialer working.
Any help greatly appreciated
Cheers
Petest
I should point out that I've removed all the O2 stuff that loads from the original boot-up, would this affect anything?

How stupid do I feel - just reinstalled voice dialer again to give it one last try and did everything as before, but I also went : start>programs>voice dialer, and hey presto, its up and running.
I didn't realise you had to start it from programs first time to get it working, I thought it would work immediately (after recording tags) by pressing whichever button I'd assigned it to.
Live and learn
Cheers
Petest

Make your BT Headset work with MS Voice Command!

I'm a new member here - found this place last night... But, I have been frustrated using my BT Headset with my phone (a Cingular (HTC Wizard) 8125) - when I try to use it, it defaults to using the built in Voice Dialer software. This of course meant that I had to program all the commands into the phone so it would recognize my voice. Well, after looking through the forums here, I realized that a registry hack would probably fix the problem, and so I went searching...
Anyway, I'm sure that you are all interested in the trials and tribulations I've been having with my phone, but to make this shorter - I found the hack to make voice command work with any BT Headset.
Here it is:
Using Total Commander, navigate to the Registry, and go to HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand. Change the value in the PATH to \Program Files\Voice Command\voicecmd.exe (the original is \Windows\sddialer.exe).
Now, when you push the button on your BT headset, Voice Command will activate instead of the Voice Dialer.
P.S: I don't know why it has "VoiceCommand" under the OEM Software section like that.
(ADDENDUM: Seems that this info is out there on the web too - just couldn't find it myself - anyway, it's the same info I just posted here... Someone beat me to it and I just had to "find" it the hard way)
Black-Wolf

Good info -- and definitely worth doing. Works beautifully. As you noted, it IS out there too -- mentioned in various spots here, and on HowardForums.com.
Good reference too is to search for "Darryl Burling" -- a MS employee now I believe -- former MS MVP and software developer. He's got a freely downloadable CAB called "VoiceEnable" that handles this nicely.
Also - while you're at it: good to remove "sddaemon" from your startup folder - no longer any need for it!

works on BA also?
this is for MS voice commander 1.5? my unit info is below, would it work same way?
going to talke a look at darryl's site too.
lastly, is darryl's cab same MS VC or very similar?
thanks all helpful info

Daryl's cab file
I have tried and tried to register for his site so I can download the cab file. After 5 tries I gave up. Can someone post the cab file.

Re: Daryl's cab file
jmgbonds said:
I have tried and tried to register for his site so I can download the cab file. After 5 tries I gave up. Can someone post the cab file.
Click to expand...
Click to collapse
You dont have to register just go to downloads and scroll down the page.
http://www.burling.co.nz/downloads.aspx

Voice Command over a Bluetooth Headset - No go after hack
newbie here!
I am trying to get my BT Headset button to activate Voice Command and am failing.
I have completed the registry hack described here:
Using Total Command I found \\registry\HKLM\Software\OEM\VoiceCommand (Default Value: \Windows\SDDialer.exe) and modified the value to \Program Files\Voice Command\voicecmd.exe This is the default location when Voice Command is installed to the main memory.
I waited a while, performed a soft reset, and I can not get the button on the headset to function (i.e. activate Voice Command). I use a Plantronics 510 and have the Cingular 8125 with the Stock ROM on it. I also have a couple of applications on the device loaded (Total Commander, Battery Pack Pro and an employers IM client)
I did try to download and run the CAB for Voice Enable (This is the hack I found on the forum). However this CAB did not seem to do anything obvious. Nor did it help with activating Voice Command.
Can anyone offer me some thoughts on this? I appreciate the help VERY much.

This hack may work on others devices, but you cannot find this path in the treo 700w to make voice command work over bt. Voice command is installed by default when you buy the device. Has anyone been able to to find the reg. entry on a treo 700w for the vc dialing hack to dial over bt (SDDialer path), or does anyone know of a reg editor that will let you search the reg. on wm5?
Thank You.

Re: Voice Command over a Bluetooth Headset - No go after hac
dgeisler said:
newbie here!
I am trying to get my BT Headset button to activate Voice Command and am failing.
I have completed the registry hack described here:
Using Total Command I found \\registry\HKLM\Software\OEM\VoiceCommand (Default Value: \Windows\SDDialer.exe) and modified the value to \Program Files\Voice Command\voicecmd.exe This is the default location when Voice Command is installed to the main memory.
I waited a while, performed a soft reset, and I can not get the button on the headset to function (i.e. activate Voice Command). I use a Plantronics 510 and have the Cingular 8125 with the Stock ROM on it. I also have a couple of applications on the device loaded (Total Commander, Battery Pack Pro and an employers IM client)
I did try to download and run the CAB for Voice Enable (This is the hack I found on the forum). However this CAB did not seem to do anything obvious. Nor did it help with activating Voice Command.
Can anyone offer me some thoughts on this? I appreciate the help VERY much.
Click to expand...
Click to collapse
not familiar with your unit but do you have your headset working properly? completely? i don't know if this will help you but try finding the latest BT stack. also, if you are running wm5, i believe you are using a MS BT stack. don't quote me on that. but my reading has led me to believe that MS stack is not the best. your buttons are BT profile based. look for AVRCP profile. i'm no expert but these are things i had to update for my stereo BT headset (pulsar)
good luck,
woody

Re: Voice Command over a Bluetooth Headset - No go after hac
dgeisler said:
newbie here!
I am trying to get my BT Headset button to activate Voice Command and am failing.
I have completed the registry hack described here:
Using Total Command I found \\registry\HKLM\Software\OEM\VoiceCommand (Default Value: \Windows\SDDialer.exe) and modified the value to \Program Files\Voice Command\voicecmd.exe This is the default location when Voice Command is installed to the main memory.
I waited a while, performed a soft reset, and I can not get the button on the headset to function (i.e. activate Voice Command). I use a Plantronics 510 and have the Cingular 8125 with the Stock ROM on it. I also have a couple of applications on the device loaded (Total Commander, Battery Pack Pro and an employers IM client)
I did try to download and run the CAB for Voice Enable (This is the hack I found on the forum). However this CAB did not seem to do anything obvious. Nor did it help with activating Voice Command.
Can anyone offer me some thoughts on this? I appreciate the help VERY much.
Click to expand...
Click to collapse
I am seeing the same thing after upgrading from Summiters test 2.3 rom to the official cingular rom.

Head set and Voice Dialer
Hi Guys,
I have looked at the thread above, but have not been able to find the registry setting in OEM...
Instead it is in a microsoft directory (\\\registry\hklm\software\Microsoft\voice Command\
Do you know where I need to change the parameter?
All I would like to do is to control voice commander via the Bluetooth unit.
Any help would be greatly appreciated.

Suki said:
Hi Guys,
I have looked at the thread above, but have not been able to find the registry setting in OEM...
Instead it is in a microsoft directory (\\\registry\hklm\software\Microsoft\voice Command\
Do you know where I need to change the parameter?
All I would like to do is to control voice commander via the Bluetooth unit.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
I have the same problem can only find: registry\hklm\software\Microsoft\voice Command\
So what and were do I change?

Voice Speed Dial Help

Hi all,
Just curious if anyone else seems to have the same problem. I am trying to use the default Voice Speed Dial on the Imate JAMin ROM update (AKU 2.0) and every time I soft reset the device (for whatever reason) I lose all the voice tags and have to reset them. Granted I do not have the Extended ROM fully loaded, just 2 or 3 of the cab files. Is there a cab file on the extended ROM that would fix this and if so which one is it?
Does anyone now the file extension and or location of the saved voice tags on the device?
Thanks all!
voyager

Bluetooth dialling using headset and MS Voice Command 1.6

folks,
I have an Orange M700 stock ROM, Motorola BT headset and Microsoft Voice Command 1.6 installed.
Has anyone managed to get the button on the BT headset to activate Voice Command? I can use the headset in calls but not initiate Voice Command.
This used to work just fine with my Prophet.
I tried unbinding the Voice Dial key on the handset, hoping that might help but no.
Any suggestions gratefully received!

I should add that I have search hi and lo and cannot find a similar case for the Trinity.
I'm not interested in messing with BT settings- just want try and configure VC 1.6 to work!

I had the same problem activating the speed dial from BT headset after flashing mUn Rom. but after a lot of hard search, I managed to find the solution in registry:
1. Go to: HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway
2. Change the string value called "BTAGExtModule" from "OEMAGW.dll" to "BTAGExt.dll".
3. SoftReset.
It work with Cyberon Voice Speed Dial, but I have not tried it with MS Voice Command.....
Good luck.

thanks shayd,
I'll take a look and see if it works!
If it does I'll be buying you a drink ;-)

so I opened up the setup.xml file for VC 1.6 and found that the equivalent file for VC 1.6 :
HKLM\Software\Microsoft\Bluetooth\AudioGateway
BTAGExtModule =vcbthag.dll
So maybe if I change the vcbthag.dll to BTAGExt.dll it may work- but I need to confirm BTAGExt.dll exists....
I suspect this file might be part of the cyberon install.

ah got it working with another solution- my BT button now opens VC- I'm not convinced it's using the headphone mic to listen to commands though.
These keys did the trick- though I manually edited using a reg editor.
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand]
"LaunchAPEnable"=dword:00000001
"VoiceCmdEnable"=dword:00000000
"Path"="\\Program Files\\Voice Command\\voicecmd.exe"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\AudioGateway]
"Capability"=dword:00000025
"BTAGExtModule"="BTAGExtModule.dll"
"SupportCLI"=dword:00000000
Basically I had to Create new the String Value Named "Path" with string "\Program Files\Voice Command\voicecmd.exe" and change HKLM\Software\Microsoft\Bluetooth\AudioGateway
BTAGExtModule =vcbthag.dll to BTAGExtModule.dll
thaks for your help shayd!

I am using an O2 Blue headset, and it operates voice command flawlessly.
The problem I have is that it does not replay the MS voice command voice through the headset, but via the trinity speaker. I have adjusted the settings, but it does not change.
Does the MS voice come through your headsets?

You guys might find a solution here:
http://forum.xda-developers.com/showthread.php?t=281977

WM6 Typhoon bugs and issues

It would be may be good to create a list of known bugs and other problems with the WM6 ROM for Typhoon. Please post here if you know about some bugs or strange behaviour.

I have been using this rom since yesterday and after few restarts, the phone remains stuck for about 3 minutes in the "mobile operator" screen during start up. Eventualy it asks for pin code, but after typing in, the time, operator and appointments information is missing in the home screen. I have flashed WM6 once again, but this phenomenon occurred again after application unlock and installation of basic software (xbar 2.5, pocket controller, Binaries smart explorer, auto keylock, smart time sync) + few restarts. Now I am searching for the reason if this is caused by some registry entry or by an incompatible software installed...At present I removed all the software but problem still present. Ready to make registry clean or hard reset...

lot of software incompability, mostly games,
-bug tcmp looks like the same most games have; there is sound but the screen will freeze in a few seconds (sound continues )

..tried to add T9 language according to instructions described at Ronswens pages for WM5. During writing sms I can choose the new language, but after choosing it only beep occurs when pressing a key. I suppose there should be changed also some another key in registry...do we have some experiences already with the T9 languages on this WM6 rom?

Netopjer said:
I have been using this rom since yesterday and after few restarts, the phone remains stuck for about 3 minutes in the "mobile operator" screen during start up. Eventualy it asks for pin code, but after typing in, the time, operator and appointments information is missing in the home screen. I have flashed WM6 once again, but this phenomenon occurred again after application unlock and installation of basic software (xbar 2.5, pocket controller, Binaries smart explorer, auto keylock, smart time sync) + few restarts. Now I am searching for the reason if this is caused by some registry entry or by an incompatible software installed...At present I removed all the software but problem still present. Ready to make registry clean or hard reset...
Click to expand...
Click to collapse
I have this problem too and I back to wm2k3

r0c0 said:
lot of software incompability, mostly games,
Click to expand...
Click to collapse
I have found the decision:
1)
We open "exe" a file with game in any HEX-editor, we find gx.dll and it is replaced on g0.dll
We clean the signature from a file by means of SignRemv and it is done new by means of Signed tool
To place the changed file back, and a file g0.dll to place in folder Windows
or 2) To replace a file gx.dll in folder Windows, in any a file-manager to put "read only" and restart (there can be problems with other programs)
As example Bustem
PS: forgive for my bad English

Netopjer said:
I have been using this rom since yesterday and after few restarts, the phone remains stuck for about 3 minutes in the "mobile operator" screen during start up. Eventualy it asks for pin code, but after typing in, the time, operator and appointments information is missing in the home screen. I have flashed WM6 once again, but this phenomenon occurred again after application unlock and installation of basic software (xbar 2.5, pocket controller, Binaries smart explorer, auto keylock, smart time sync) + few restarts. Now I am searching for the reason if this is caused by some registry entry or by an incompatible software installed...At present I removed all the software but problem still present. Ready to make registry clean or hard reset...
Click to expand...
Click to collapse
how do you make application unlock on wm6 ?

Java
is there Java support with this WM6 ROM? I can't seem to find it. Very useful for Opera Mini and Gmail standalone app.

sebip said:
how do you make application unlock on wm6 ?
Click to expand...
Click to collapse
Use regeditSTG2.exe to modify the following phone registry keys:
- HKEY_LOCAL_MACHINE\Security\Policies\Policies0001001 = 1 (that will enable the rapi_config, 1 means full access to rapi config, 2 means user controlled access)
HKEY_LOCAL_MACHINE\Security\Policies\Policies0001005 = 40 (that disallows the check for security cirtificate etc)
HKEY_LOCAL_MACHINE\Security\Policies\Policies0001017 = 144
Run SDA_ApplicationUnlock.exe from the PC with the phone connected via ActiveSync. This will unlock the phone.
Disconnect and switch the phone off then back on again.

Hi,
I can't use voice talk (via handset bluetooth) before in wm2k3 and wm5 i have the fonction to add voice command with contact, but now no.
It is normal ?
Thx.

...I also revealed interresting behaviour when you are trying to connect to internet via GPRS. There sometimes occurrs error message that it couldnt be established GPRS connection because of missing GPRS coverage. (the "G" is also missing in homescren icon bar). But I am sure there is no GPRS coverage problem in my location.
So in this case you have to go into the phone settings and choose your network again. Afterwards when you are re-registerd in your network, the symbol G is present in iconbar and you can run the GPRS connection. Sometimes prolongomenous procedure...

I had pretty much the same thing as a few of the others.
Xphone11
WM5 - WM6
It flashed all ok, the phone booted all good and worked fine - but then after around 15 min of running, reciving one call and 3 failed attempts at sycning it died.
Well - actually, I re-booted it for something and it never came right after that.
These are the issues which appeared;
Contacts wouldn't open (yet the proccess was fired),
Calendar threw a 'missing file' error,
Start menu wouldn't work (no response from the button),
GPRS service was dropped ("no service available" - even though there was and the phone could see it if you seeked for it),
Yet the phone recived text messages while in this state and while calling the phone it just wouldn't do anything - yet to the caller it would appear to just ring and ring (not a provided service).
An interesting thing - I found that by making a change to the home screen or theme would allow the start menu too function as it should and the the clock to be displayed on the home screen.
Could be an area worth investigating....
I've had a taste now.... I want WM6!!!
What can I do to help?

...it also would be interresting to know whether there is a possibility to run the USB modem - I couldnt find it in start menu/accesories nor in the windows folder...

How to install for QTEK 8020 (T-Mobile SDA) joystick? please help... fuctional joystick in WM06 (my english low sorry)... right is up, left is down and left not functional and right... ???
///... please delete topic... ///

I am also wondering why nobody who is capable enough tries to make a "joystick-version" of the Typhoon WM6 - that work would be highly appreciated by so many people...

DoctorT said:
I am also wondering why nobody who is capable enough tries to make a "joystick-version" of the Typhoon WM6 - that work would be highly appreciated by so many people...
Click to expand...
Click to collapse
Because WM6 for Typhoon Error on Dumprom.

WM6 looks fantastic, however...
I also have a few disappointments the most important of which are:
- No "Headset" option in the profiles menu!!!
- No STK menu!!!
- Very easily crashing on games and some progs (hope to fix it as stated above)
and the camera is definately worse than in 2003SE

..various language t9 cab files - I tried it and it works fine on WM6
http://melgurth.ovh.org/

do anyone try the standard calculator in wm6 ? It show error in my c500 so I have to use other calculator program

..it looks that my calculator works properly...