Related
I've researched the voice dialling applications and decided to install the trial version of vito voice dialer.
I initially downloaded the zip file for 2003 mobile edition and then installed it. All went well, recorded tags for my contacts, thought great package, I'll soon be buying this.
Assigned the voice dialer to my calender button and thought it was time to test it out.
Nothing happens apart from "voice dialer" is displayed at the top for 1/2 a second then nothing else. It just reverts back to the today screen.
So, i removed the program and associated files and downloaded the cab file. Installed this - fine.
Exactly the same thing happens (doesn't happen).
I've since downloaded and installed all the available files and the same thing happens.
Anyone got any ideas.
I've loaded and tried the fonix dialer but i had this on my old jornada 928 and I'm still not impressed with it so I'd rather get the vito dialer working.
Any help greatly appreciated
Cheers
Petest
I should point out that I've removed all the O2 stuff that loads from the original boot-up, would this affect anything?
How stupid do I feel - just reinstalled voice dialer again to give it one last try and did everything as before, but I also went : start>programs>voice dialer, and hey presto, its up and running.
I didn't realise you had to start it from programs first time to get it working, I thought it would work immediately (after recording tags) by pressing whichever button I'd assigned it to.
Live and learn
Cheers
Petest
I finally figured out that MS Voice Command is the program that makes the keyboard input box be slow to appear. It was taking like 6 seconds to bring up the list to choose another input method. On my Jamin, I'm 100% sure that MS Voice is to blame. After uninstalling it the delay disappeared. This is a real drag since I used MS Voice all the time for making calls. I wonder if the K-jam has the same problem? Anyone have a work around for this problem?
Well spotted That's always the first step on the way to a solution. I also depend heavily on this software so I hope a work-around's available.
Regards
Could this be the cause of the thumbpad (T9 pad) not coming up all the time, requiring a soft reset? I'm using WM2003SE btw.
I aslo stopped using MS voice command on my JAMin. I did a hard reset and did not install PocketZenPhone, Phone Alarm and MS command.
Now my JAMin runs awesome! I can change the keyboards instantly and I can even use full screen keyboards which never would work before.
I do miss voice command but I can live without it. In fact the built in voice dialer is not bad. I don't miss having to say the full name and then home or mobile or whatever. The less I have to talk to my phone the less crazy i feel. Plus it works better over bluetooth headsets.
MS Voicecommand & slowwww SIP
I encountered this prob about 4 months ago after upgrading my Xda2 to WM5.0. When I upgraded my device to the prophet, the exact same thing happened.
Here's my work-around:
1) Do a hard reset
2) Export the entire registry
3) Install MSVC
4) Import the registry saved in step 2
VOILA... now I have MSVC & a normal SIP change....
This is a great find. I've been trying to find out why my selector take 7 seconds to pull up. I thought it was keyboard skin or some other input program I installed. Didn't realize it was MSVC.
Now only if we can figure out which registry changes are causing this problem...
Re: MS Voicecommand & slowwww SIP
Putra said:
I encountered this prob about 4 months ago after upgrading my Xda2 to WM5.0. When I upgraded my device to the prophet, the exact same thing happened.
Here's my work-around:
1) Do a hard reset
2) Export the entire registry
3) Install MSVC
4) Import the registry saved in step 2
VOILA... now I have MSVC & a normal SIP change....
Click to expand...
Click to collapse
For those of you who don't have MSVC installed already, Step 1 is not necessary, i.e. no hard reset.
All you need to do is export the registry before installing MSVC, install MSVC and restore your registry.
I might have found something
I installed the trial of SKTools and was playing around with the "invalid registry entry" tool and deleted a few entries that were flagged. I remember one that had something to do with VC and started with a weird character "%a" or similar. Sorry that I can't remember better, but I did not realize right away that that fixed the problem, since I was only "cleaning up", but the keyboard selection is working well right now and that was the only thing I changed in the meantime that had anything to do with it. Hope that's the right direction.
Seems to be fine after the newest ROM update
I had the Slow keyboard with older ROM
Phone: JAMin
Some tweaks may solve the problem.
I have a Cingular 8125 with 200Mhz CPU (reportedly running at 180Mhz only).
I use Omapclock to speed up PocketSNES, but it doesn't speed up the keyboard selector at all.
Also tried the Registry trick, but restoring the original Registry after installing Voice Command clears everything, settings, program icon... ... and disable Voice Command.
So it's not a good solution.
Finally tried to tweak the Registry (for generally speeding up WM5).
It's worked so perfectly for me.
The Keyboard Selector menu pops up in 1 second or less, almost instantly.
Before tweaking, even without Voice Command installed, it takes 2 to 4 seconds.
Here are the steps:
---------------------------------------------------------------
I.
Increase cache: Noticable effect on WM5.01. Use any registry editor:
* Go to HKEY_LOCAL_MACHINE\SYSTEM\GDI\GLYPHCACHE\
* Change 'limit' to 8192 up to 32768
* Close registry editor (Save)
* Soft reset
II.
Disable Animated Menu (I know, doesn't relate much with the KB selector problem, but it speeds up the whole system anyway)
Use Registry Editor:
* HKEY_LOCAL_MACHINE \SYSTEM\GWE\Menu,
* Change "AniType" from default 6 to 0
III.
Use any add-on that close the programs for real, not just minimize it (SPB Pocket Plus, or PHM Free Utilities, whatever)
IV.
Increase SD card access rate:
Use Registry Editor:
* hklm\drivers\sdcard\clientdrivers\class\mmc_class
* hklm\drivers\sdcard\clientdrivers\class\SDMemory_c lass
Change both BlockTransferSize from 64 to 128 or 256
(I use 256. Don't know if it make the reading/writing process any unstable, but so far no problem for me ever. Plus I have backup, so why worry)
V.
Affects WM5.0 and can increase overall speed up to 20%
Use Registry Editor to change from default 0 to:
* [HKLM\System\StorageManager\FATFS] CacheSize = 4096 EnableCache = 1 * [HKLM\System\StorageManager\Filters\fsreplxfilt] ReplStoreCacheSize = 4096
SOFT RESET
(For me, I did everything before Resetting)
PHM registry Editor can be downloaded from http://www.phm.lu/products
Good luck.
If that does not solve your problem, please tell. Because then I know that I might accidentally did something else that made it work
Chai T
Is there any update on how we can fix this besides importing/exporting the registry after install?
I followed chaintox's directions for speeding up the device, which did seem to speed up some of the menu drawing and a few other things that it should have, but it did not help the speed of the choosing a SIP at all. I've removed all third party SIPs, and also disabled the PhonePad SIP, and it's still very slow (around 15-30 seconds).
I'm not willing to do a hard reset right now... is there anyone that has the registry export from before and after installing Voice Command? That would let me see exactly which keys were created, so I could look at removing some one by one until I find what's causing the slowdown.
Thanks in advance.
I found out that the slow SIP selector bug has something related to AKU2.2 and up...
I reflashed back to the original dopod ROM with AKU 2.15 and my SIP selector is fast even with voicecommand installed.
I'm curious if AKU 3.3 has this bug and whether WM6 has this issue too? This was probably the primary reason for ditching the latest ROMs and sticking with the original.
Well, I installed Voice Command on an WM5.0 (no AKU) emulator image to get the registry diff, and didn't see anything out of the ordinary. Installing Voice Command also did not cause the SIP slowdown on the emulated PPC, so I tend to agree with everyone that it may be AKU2.2 specific. I'm curious to see the answer to mr_yellow's question about AKU3.3 or WM6... I may be willing to upgrade if it fixes this issue.
I just remembered that I did test AKU3.3 (I think i flashed AERGS's AKU3.3 ROM) and it did have the same laggy SIP selector bug/feature... so the only other option is WM6... Does anyone know if you the SIP selector is slow for WM6? This is for a G3 device (dopod818pro)...
Thanks,
doh!...
Hi all,
I have been noticing that my input selector is really slow so after much digging around I came upon this thread and Chaintox's instructions.
However I read his first instruction to increase cache and followed that with a soft reset and now my JAMin isnt completing the soft reset
It is just hanging at the SPB safe mode menu reboot screen.
Is there anything I can do?
please help! and contribute to the forgive-a-noob fund
Cheers
ben
chaintox said:
I have a Cingular 8125 with 200Mhz CPU (reportedly running at 180Mhz only).
I use Omapclock to speed up PocketSNES, but it doesn't speed up the keyboard selector at all.
Also tried the Registry trick, but restoring the original Registry after installing Voice Command clears everything, settings, program icon... ... and disable Voice Command.
So it's not a good solution.
Finally tried to tweak the Registry (for generally speeding up WM5).
It's worked so perfectly for me.
The Keyboard Selector menu pops up in 1 second or less, almost instantly.
Before tweaking, even without Voice Command installed, it takes 2 to 4 seconds.
Here are the steps:
---------------------------------------------------------------
I.
Increase cache: Noticable effect on WM5.01. Use any registry editor:
* Go to HKEY_LOCAL_MACHINE\SYSTEM\GDI\GLYPHCACHE\
* Change 'limit' to 8192 up to 32768
* Close registry editor (Save)
* Soft reset
II.
Disable Animated Menu (I know, doesn't relate much with the KB selector problem, but it speeds up the whole system anyway)
Use Registry Editor:
* HKEY_LOCAL_MACHINE \SYSTEM\GWE\Menu,
* Change "AniType" from default 6 to 0
III.
Use any add-on that close the programs for real, not just minimize it (SPB Pocket Plus, or PHM Free Utilities, whatever)
IV.
Increase SD card access rate:
Use Registry Editor:
* hklm\drivers\sdcard\clientdrivers\class\mmc_class
* hklm\drivers\sdcard\clientdrivers\class\SDMemory_c lass
Change both BlockTransferSize from 64 to 128 or 256
(I use 256. Don't know if it make the reading/writing process any unstable, but so far no problem for me ever. Plus I have backup, so why worry)
V.
Affects WM5.0 and can increase overall speed up to 20%
Use Registry Editor to change from default 0 to:
* [HKLM\System\StorageManager\FATFS] CacheSize = 4096 EnableCache = 1 * [HKLM\System\StorageManager\Filters\fsreplxfilt] ReplStoreCacheSize = 4096
SOFT RESET
(For me, I did everything before Resetting)
PHM registry Editor can be downloaded from http://www.phm.lu/products
Good luck.
If that does not solve your problem, please tell. Because then I know that I might accidentally did something else that made it work
Chai T
Click to expand...
Click to collapse
Wow, i forgot about this thread... I found a good workaround/solution. Not sure if it'll work on all devices. but it worked on my HTC Prophet.
Figured out the exact keys in the registry to import/export.
see this wiki page for more details
http://wiki.xda-developers.com/index.php?pagename=ProphetFAQ
This can be done after you've installed VC.
Cool TY for that info !
http://forum.xda-developers.com/showthread.php?p=2946880#post2946880
This fixes the problem PRONTO!
I'm a new member here - found this place last night... But, I have been frustrated using my BT Headset with my phone (a Cingular (HTC Wizard) 8125) - when I try to use it, it defaults to using the built in Voice Dialer software. This of course meant that I had to program all the commands into the phone so it would recognize my voice. Well, after looking through the forums here, I realized that a registry hack would probably fix the problem, and so I went searching...
Anyway, I'm sure that you are all interested in the trials and tribulations I've been having with my phone, but to make this shorter - I found the hack to make voice command work with any BT Headset.
Here it is:
Using Total Commander, navigate to the Registry, and go to HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand. Change the value in the PATH to \Program Files\Voice Command\voicecmd.exe (the original is \Windows\sddialer.exe).
Now, when you push the button on your BT headset, Voice Command will activate instead of the Voice Dialer.
P.S: I don't know why it has "VoiceCommand" under the OEM Software section like that.
(ADDENDUM: Seems that this info is out there on the web too - just couldn't find it myself - anyway, it's the same info I just posted here... Someone beat me to it and I just had to "find" it the hard way)
Black-Wolf
Good info -- and definitely worth doing. Works beautifully. As you noted, it IS out there too -- mentioned in various spots here, and on HowardForums.com.
Good reference too is to search for "Darryl Burling" -- a MS employee now I believe -- former MS MVP and software developer. He's got a freely downloadable CAB called "VoiceEnable" that handles this nicely.
Also - while you're at it: good to remove "sddaemon" from your startup folder - no longer any need for it!
works on BA also?
this is for MS voice commander 1.5? my unit info is below, would it work same way?
going to talke a look at darryl's site too.
lastly, is darryl's cab same MS VC or very similar?
thanks all helpful info
Daryl's cab file
I have tried and tried to register for his site so I can download the cab file. After 5 tries I gave up. Can someone post the cab file.
Re: Daryl's cab file
jmgbonds said:
I have tried and tried to register for his site so I can download the cab file. After 5 tries I gave up. Can someone post the cab file.
Click to expand...
Click to collapse
You dont have to register just go to downloads and scroll down the page.
http://www.burling.co.nz/downloads.aspx
Voice Command over a Bluetooth Headset - No go after hack
newbie here!
I am trying to get my BT Headset button to activate Voice Command and am failing.
I have completed the registry hack described here:
Using Total Command I found \\registry\HKLM\Software\OEM\VoiceCommand (Default Value: \Windows\SDDialer.exe) and modified the value to \Program Files\Voice Command\voicecmd.exe This is the default location when Voice Command is installed to the main memory.
I waited a while, performed a soft reset, and I can not get the button on the headset to function (i.e. activate Voice Command). I use a Plantronics 510 and have the Cingular 8125 with the Stock ROM on it. I also have a couple of applications on the device loaded (Total Commander, Battery Pack Pro and an employers IM client)
I did try to download and run the CAB for Voice Enable (This is the hack I found on the forum). However this CAB did not seem to do anything obvious. Nor did it help with activating Voice Command.
Can anyone offer me some thoughts on this? I appreciate the help VERY much.
This hack may work on others devices, but you cannot find this path in the treo 700w to make voice command work over bt. Voice command is installed by default when you buy the device. Has anyone been able to to find the reg. entry on a treo 700w for the vc dialing hack to dial over bt (SDDialer path), or does anyone know of a reg editor that will let you search the reg. on wm5?
Thank You.
Re: Voice Command over a Bluetooth Headset - No go after hac
dgeisler said:
newbie here!
I am trying to get my BT Headset button to activate Voice Command and am failing.
I have completed the registry hack described here:
Using Total Command I found \\registry\HKLM\Software\OEM\VoiceCommand (Default Value: \Windows\SDDialer.exe) and modified the value to \Program Files\Voice Command\voicecmd.exe This is the default location when Voice Command is installed to the main memory.
I waited a while, performed a soft reset, and I can not get the button on the headset to function (i.e. activate Voice Command). I use a Plantronics 510 and have the Cingular 8125 with the Stock ROM on it. I also have a couple of applications on the device loaded (Total Commander, Battery Pack Pro and an employers IM client)
I did try to download and run the CAB for Voice Enable (This is the hack I found on the forum). However this CAB did not seem to do anything obvious. Nor did it help with activating Voice Command.
Can anyone offer me some thoughts on this? I appreciate the help VERY much.
Click to expand...
Click to collapse
not familiar with your unit but do you have your headset working properly? completely? i don't know if this will help you but try finding the latest BT stack. also, if you are running wm5, i believe you are using a MS BT stack. don't quote me on that. but my reading has led me to believe that MS stack is not the best. your buttons are BT profile based. look for AVRCP profile. i'm no expert but these are things i had to update for my stereo BT headset (pulsar)
good luck,
woody
Re: Voice Command over a Bluetooth Headset - No go after hac
dgeisler said:
newbie here!
I am trying to get my BT Headset button to activate Voice Command and am failing.
I have completed the registry hack described here:
Using Total Command I found \\registry\HKLM\Software\OEM\VoiceCommand (Default Value: \Windows\SDDialer.exe) and modified the value to \Program Files\Voice Command\voicecmd.exe This is the default location when Voice Command is installed to the main memory.
I waited a while, performed a soft reset, and I can not get the button on the headset to function (i.e. activate Voice Command). I use a Plantronics 510 and have the Cingular 8125 with the Stock ROM on it. I also have a couple of applications on the device loaded (Total Commander, Battery Pack Pro and an employers IM client)
I did try to download and run the CAB for Voice Enable (This is the hack I found on the forum). However this CAB did not seem to do anything obvious. Nor did it help with activating Voice Command.
Can anyone offer me some thoughts on this? I appreciate the help VERY much.
Click to expand...
Click to collapse
I am seeing the same thing after upgrading from Summiters test 2.3 rom to the official cingular rom.
Head set and Voice Dialer
Hi Guys,
I have looked at the thread above, but have not been able to find the registry setting in OEM...
Instead it is in a microsoft directory (\\\registry\hklm\software\Microsoft\voice Command\
Do you know where I need to change the parameter?
All I would like to do is to control voice commander via the Bluetooth unit.
Any help would be greatly appreciated.
Suki said:
Hi Guys,
I have looked at the thread above, but have not been able to find the registry setting in OEM...
Instead it is in a microsoft directory (\\\registry\hklm\software\Microsoft\voice Command\
Do you know where I need to change the parameter?
All I would like to do is to control voice commander via the Bluetooth unit.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
I have the same problem can only find: registry\hklm\software\Microsoft\voice Command\
So what and were do I change?
updated to latest dopod rom and have lost voice dial.
Can someone give me the installation cab from extended rom of the imate rom please.
Its ok, I figured it out
I installed the last Dopod version and I don't have the problem you mentioned. Did you train your voice?
Guys, I have this same problem - lost my voice dial - and I have not been able to figure this out.
Any idea what I can try doing?
Thanks
i tried installing this cab: BA_WM5_Voice_Dialer_2.cab (do a search) and this restored the sddialer program and i mapped soft key, but wouldn't work with bluetooth despite reg tweaks.
Eventually I restored back to jamin 213 rom cos i didn't notice any difference in speed and infact i had the same memory leak problem. At least i have sddialer working again.
If only imate would release a rom for the jamin like this one for the kjam :K-JAM_WWE_216901_2169101_020710_ship. Best performance, most stable, and no mem leak. Alas i wanted a thinner phone so will have to be patient.
Try finding the following Voice Dial files under \Windows folder and copy and paste shortcuts in \Windows\Start Menu\Programs:
1. cvdsetting.exe (Cybron Voice Dial Settings), it was in Settings folder.
2. sddialer.exe (Voice Speed Dial application).
I went from the orange rom to the latest dopod rom but found the same problems with missing voice dialling. I installed the cab for it but it would now activate from my BT headset, in fact it completely messed up the headset connection in that when you clicked for voice dial it would switch to the phone, open the voice channel (as if expecting you to voice dial) and never close the voice channel. The only way I could get it to close the voice channel was to manually run the sddialler and speak.
As a result I flashed with the imate rom and it works perfectly. I get no more hangs/won't switch on and voice dialling is working perfectly allowing me to activate from the bt headset.
Correct ROMs.
Although you can use same rom on different devices, you need to be careful about selecting a good one for the device family, otherwise, I presume, you run into troubles.
downgrad system?
hi!
How can you downgrad the system from last Dopod Rom to last Imate Rom?
If if try, the update utility (and the no-Id too) tell me error: update only.
thanks a lot.
It would be may be good to create a list of known bugs and other problems with the WM6 ROM for Typhoon. Please post here if you know about some bugs or strange behaviour.
I have been using this rom since yesterday and after few restarts, the phone remains stuck for about 3 minutes in the "mobile operator" screen during start up. Eventualy it asks for pin code, but after typing in, the time, operator and appointments information is missing in the home screen. I have flashed WM6 once again, but this phenomenon occurred again after application unlock and installation of basic software (xbar 2.5, pocket controller, Binaries smart explorer, auto keylock, smart time sync) + few restarts. Now I am searching for the reason if this is caused by some registry entry or by an incompatible software installed...At present I removed all the software but problem still present. Ready to make registry clean or hard reset...
lot of software incompability, mostly games,
-bug tcmp looks like the same most games have; there is sound but the screen will freeze in a few seconds (sound continues )
..tried to add T9 language according to instructions described at Ronswens pages for WM5. During writing sms I can choose the new language, but after choosing it only beep occurs when pressing a key. I suppose there should be changed also some another key in registry...do we have some experiences already with the T9 languages on this WM6 rom?
Netopjer said:
I have been using this rom since yesterday and after few restarts, the phone remains stuck for about 3 minutes in the "mobile operator" screen during start up. Eventualy it asks for pin code, but after typing in, the time, operator and appointments information is missing in the home screen. I have flashed WM6 once again, but this phenomenon occurred again after application unlock and installation of basic software (xbar 2.5, pocket controller, Binaries smart explorer, auto keylock, smart time sync) + few restarts. Now I am searching for the reason if this is caused by some registry entry or by an incompatible software installed...At present I removed all the software but problem still present. Ready to make registry clean or hard reset...
Click to expand...
Click to collapse
I have this problem too and I back to wm2k3
r0c0 said:
lot of software incompability, mostly games,
Click to expand...
Click to collapse
I have found the decision:
1)
We open "exe" a file with game in any HEX-editor, we find gx.dll and it is replaced on g0.dll
We clean the signature from a file by means of SignRemv and it is done new by means of Signed tool
To place the changed file back, and a file g0.dll to place in folder Windows
or 2) To replace a file gx.dll in folder Windows, in any a file-manager to put "read only" and restart (there can be problems with other programs)
As example Bustem
PS: forgive for my bad English
Netopjer said:
I have been using this rom since yesterday and after few restarts, the phone remains stuck for about 3 minutes in the "mobile operator" screen during start up. Eventualy it asks for pin code, but after typing in, the time, operator and appointments information is missing in the home screen. I have flashed WM6 once again, but this phenomenon occurred again after application unlock and installation of basic software (xbar 2.5, pocket controller, Binaries smart explorer, auto keylock, smart time sync) + few restarts. Now I am searching for the reason if this is caused by some registry entry or by an incompatible software installed...At present I removed all the software but problem still present. Ready to make registry clean or hard reset...
Click to expand...
Click to collapse
how do you make application unlock on wm6 ?
Java
is there Java support with this WM6 ROM? I can't seem to find it. Very useful for Opera Mini and Gmail standalone app.
sebip said:
how do you make application unlock on wm6 ?
Click to expand...
Click to collapse
Use regeditSTG2.exe to modify the following phone registry keys:
- HKEY_LOCAL_MACHINE\Security\Policies\Policies0001001 = 1 (that will enable the rapi_config, 1 means full access to rapi config, 2 means user controlled access)
HKEY_LOCAL_MACHINE\Security\Policies\Policies0001005 = 40 (that disallows the check for security cirtificate etc)
HKEY_LOCAL_MACHINE\Security\Policies\Policies0001017 = 144
Run SDA_ApplicationUnlock.exe from the PC with the phone connected via ActiveSync. This will unlock the phone.
Disconnect and switch the phone off then back on again.
Hi,
I can't use voice talk (via handset bluetooth) before in wm2k3 and wm5 i have the fonction to add voice command with contact, but now no.
It is normal ?
Thx.
...I also revealed interresting behaviour when you are trying to connect to internet via GPRS. There sometimes occurrs error message that it couldnt be established GPRS connection because of missing GPRS coverage. (the "G" is also missing in homescren icon bar). But I am sure there is no GPRS coverage problem in my location.
So in this case you have to go into the phone settings and choose your network again. Afterwards when you are re-registerd in your network, the symbol G is present in iconbar and you can run the GPRS connection. Sometimes prolongomenous procedure...
I had pretty much the same thing as a few of the others.
Xphone11
WM5 - WM6
It flashed all ok, the phone booted all good and worked fine - but then after around 15 min of running, reciving one call and 3 failed attempts at sycning it died.
Well - actually, I re-booted it for something and it never came right after that.
These are the issues which appeared;
Contacts wouldn't open (yet the proccess was fired),
Calendar threw a 'missing file' error,
Start menu wouldn't work (no response from the button),
GPRS service was dropped ("no service available" - even though there was and the phone could see it if you seeked for it),
Yet the phone recived text messages while in this state and while calling the phone it just wouldn't do anything - yet to the caller it would appear to just ring and ring (not a provided service).
An interesting thing - I found that by making a change to the home screen or theme would allow the start menu too function as it should and the the clock to be displayed on the home screen.
Could be an area worth investigating....
I've had a taste now.... I want WM6!!!
What can I do to help?
...it also would be interresting to know whether there is a possibility to run the USB modem - I couldnt find it in start menu/accesories nor in the windows folder...
How to install for QTEK 8020 (T-Mobile SDA) joystick? please help... fuctional joystick in WM06 (my english low sorry)... right is up, left is down and left not functional and right... ???
///... please delete topic... ///
I am also wondering why nobody who is capable enough tries to make a "joystick-version" of the Typhoon WM6 - that work would be highly appreciated by so many people...
DoctorT said:
I am also wondering why nobody who is capable enough tries to make a "joystick-version" of the Typhoon WM6 - that work would be highly appreciated by so many people...
Click to expand...
Click to collapse
Because WM6 for Typhoon Error on Dumprom.
WM6 looks fantastic, however...
I also have a few disappointments the most important of which are:
- No "Headset" option in the profiles menu!!!
- No STK menu!!!
- Very easily crashing on games and some progs (hope to fix it as stated above)
and the camera is definately worse than in 2003SE
..various language t9 cab files - I tried it and it works fine on WM6
http://melgurth.ovh.org/
do anyone try the standard calculator in wm6 ? It show error in my c500 so I have to use other calculator program
..it looks that my calculator works properly...