Database Users

Need To Open My XDA2

hello, as ive already said on here i flushed my xda2 down the toilet, but now i need to open it up, ive got it open but how do i disconnect the screen from the pcb? i cant get the ribbon cable connector undone?

ftp://xda:[email protected]/Himalaya/Himalaya-Service-Manual/
HTC XDA II-MDA II Service Manual.pdf
good luck!!!!

service manual for cingular 8125? square one? Cant use USB/Charge

I downloaded that other service manual for the htc wizard 8125, but mine is the cingular one - that one posted is different ? my phone wont charge anymore, when I bought it, it didn't charge either one of the USB pins on the phone itself was bent, so I bent it back and it works now, but now it wont charge anymore and the battery is dead is there a way to replace just the chargin/pc connect usb portion of the phone? I wanted to look inside to see if I can solder a new connecter inside, thanks guys!

usb connector broken

hi. is there someon in germany, austria or italy who is able to repair my
polaris?? the mini-usb connector is broken, I can not charge the battery or
get any connection.
I have found only one address who offer to repair the usb connector, but I do not want to send my polaris to USA to get the service.
please help if you have some tips or ideas.
thx

Sorry I can't help you, just wanted to say a had the same problem twice - fortunately my provider replaced the hardware without problems.
Good luck anyway!

Broken Mini USB
I just had this same problem with my Cruise. It is only 4 months old and I sent to HTC for warranty and they wanted to charge 400 to replace the motherboard and usb plug. They claimed it was abused. They need their heads examined.
HTC has bad customer service and warranty.

Hi Brunner, you might want to try http://www.mobilephonerepairs.co.uk/home.asp . They are based in London, UK and sending to/from Germany was no problem for me. Just mail to [email protected], explain your issue and ask for a repair price quote.
So far I have only bought a replacement LCD from them and not used their repair service - but will do so next week. Anyway, they were friendly and supportive, and the LCD arrived in good condition and well packaged. Overall a very good impression.

i have some expirience with HTC repair, and can say that the most problems in HTC are in main board - very unstable connections with chips and pcb.
try to tense unit left and right side while usb is connected.
one more - switch off unit (take off battery and pull in) and connect adapter - i am sure in this mode charging will go - this is separate chip doing this automaticly ,but when processor running can sw it off. Stay 1-2 hours and battery will go full.

thank you for your replies... I'll try to contatct the london adress (big thank to doctah).
to romensat: thank also for your , but it is so, that I am not able to connect the usb cable at all, because the little plastic peace into the connector is broken out an some pins are damaged.
regards
brunner

just curious: how did this end up?

USB Device not recognized

I just bought used Hima through, because I broke LCD screen on mine. And I got it with some old German ROM on it, it's working fine, but I would like something newer and in English. The thing is, that when I put phone in USB craddle, it only charges the device and says that USB Device Not Recognized. I cannot upgrade ROM nor anything else, just charge it. On my previous broken Hima, I had no such problem... Does anyone has clue what is wrong and what is the solution?
Thank you in advance...

I just found out that when I want to sync, I can do it, but have to pull cell phone toward me while it's in craddle. But doesn't work when I want to flash ROM. So I guess it's pins problem. I looked them and don't see anything bad, anyone has clue what to do?

OK, I finally managed to install ROM, I had to stick something to push forward my Hima in cradle. Does anyone know what can I do to fix that problem? It's the pins connection problem...

first of all..i don't understand why you started a new topic on this problem because THERE IS ANOTHER TOPIC WITH THIS PROBLEM JUST 3 LINES DOWN AFTER YOUR TOPIC...if you had read but didn't......about the conectivity problem with the pins cradle usb cable and advanced functionality of the usb-pc function..and thath it works just for the charge and for standard conectivity is says device mailfunction...

Because I had german windows 2003 that had no advanced functionality of the usb-pc connection! And also I didn't see too many similarities with those posts which aren't three lines down after my topic.
I changed 2 craddles and also had same problems. But I managed to access PPC when I gave some pressure on cell phone while in cradle...
I have another broken Hima (LCD screen broken), and wondered if I could take his connector?!

Anybody else got this problem ?

my phone will not do ANYTHING requiring usb other than charge , my phone charges perfectly either from wall or pc , but will not mount usb,tether,htc sync, etc.
i love music , so i used to always need to mount to add a new album or etc. and since atleast a month ago my phone is extremly picky about mounting usb, if im EVEN LUCKY to get it in a right position for it to mount usb,
just yesterday i was suprised because my 4th time wiggling and flipping , and bending cable finally got my phone to mount and transfer files at a MAX , 2.2 mbps speed, thats half of what it used to give me before the problems happened , i am assuming the problem is my usb (has to be atleast 92% of the cause)
i just want to know if theres a fix , or a legit work around , im okay with wifi mounts , i just need one thats straightforward , and probally has basic file managing .
thanks in advance for any replies
Sent from my Mytouch 4G Running Capychimps Sense 3.5 rom (v.4.0)

i have a solution for now , im currently using swiFTP , and its exactly what i was looking for , but still does anybody else have this problem ? or know how to fix it ? , ive also tried mounting in recovery, that doesnt work either
Sent from my Mytouch 4G Running Capychimps Sense 3.5 rom (v.4.0)

This problem is most likely physical - one of the D+/D- USB data wire pair is disconnected. In this case the phone will still detect VBUS (voltage on the USB) since the power wires aren't disconnected, will use it for charging, but won't be able to establish any kind of USB communication.

Jack_R1 said:
This problem is most likely physical - one of the D+/D- USB data wire pair is disconnected. In this case the phone will still detect VBUS (voltage on the USB) since the power wires aren't disconnected, will use it for charging, but won't be able to establish any kind of USB communication.
Click to expand...
Click to collapse
is there a way to fix that ? am i gonna have to pick around my usb port ? or take apart my phone ?
Sent from my Mytouch 4G Running Capychimps Sense 3.5 rom (v.4.0)

If it's indeed a physical problem - you'll need to do both, I'm afraid.
First, you can look inside your microUSB plug and see if the 5 tiny contact strips are visible and not dirty or obstructed by possibly broken piece of plastic ahead of them. If you have a tiny flat screwdriver - you can try to use it to scrub the dirt off the contact strips.
And if everything looks ok there - the problem might be in the soldering of the USB slot to the board, in which case you'll have to disassemble the phone and re-solder the contact pins to the board.