hello, as ive already said on here i flushed my xda2 down the toilet, but now i need to open it up, ive got it open but how do i disconnect the screen from the pcb? i cant get the ribbon cable connector undone?
ftp://xda:[email protected]/Himalaya/Himalaya-Service-Manual/
HTC XDA II-MDA II Service Manual.pdf
good luck!!!!
Related
hello, does any body know if there is a way of telling what type of lcd screen the xda2 and xda2i have without opening the phone? i have purchased a phone with a good screen bad broken connector but the screen connector is different to the two broken xda2 xda2i that i already have. i am thinking of trying to find a xda2 with a broken screen but i need the one with the ribbon type connector not the plug in type. does any body know? or does any body have a xda2 with the ribbon type connector that has a broken screen they want to sell me? all i need is the board nothing else, someone may have one lying around as i have two boards but of the plug in type connector.
thanks very much
fatblokes.
screen
also sorry to be a pain, does anybody know if the screen i have with a ribbon connector will fit in another phone or pda?
thanks.
fatblokes
XDA II , XDA IIi screens
Hi the XDA II uses a Sony LCD Module P/N ACX502AKN-7. this is hard to find right now. I do not know of any availible
The XDA IIi and MDA IIi use a TD part. I have these in stock.
BTW: watch out for Chinese resellers from SHENZHEN China via hotmail accounts. They mostly scams, require payment to a Hong Kong personal accounts, and there is no recourse, warrantee, or reputation.
water went into my o2 mini...everythin works f9 but.... i m not able to connect it to my pc...wenever i connect d pc shows an usb malfunction, d led display is orange ...n d o2 charges but connect is not established
not sure whether this will help you,
try to uninstall and install the active sync again??
or worst case is the hardware that identify the O2 mini mobile is broken?
Try to clean the connector and the area near the connector insude the device. Sometimes water with dust create short circuit. Use a toothbrush
i lft my o2 to dry out in sunlight.....but no effect...wat to do plz help???
yesterdaymy connection/charge/mini usb port broke whilst inserting the charger, by the looks of it its come straight off the board, a bit silly securing such a heavily used connection by just the solder but anyway, i have no idea who how i go about gettingn it repaired by qtek.
the manual has some silly link to some other company who have no help and no links,i just wana send it preferably to a ukrepair centreand get it back is it too much to ask lol. or do they make it this hard to get repairs done to keep there costs down?
any links to where i send my 9000 tooor contactnumbers would be great
I downloaded that other service manual for the htc wizard 8125, but mine is the cingular one - that one posted is different ? my phone wont charge anymore, when I bought it, it didn't charge either one of the USB pins on the phone itself was bent, so I bent it back and it works now, but now it wont charge anymore and the battery is dead is there a way to replace just the chargin/pc connect usb portion of the phone? I wanted to look inside to see if I can solder a new connecter inside, thanks guys!
what do i have to do to get to the PCB of my Hermes? i only see 3 screws. and by removing them i still cant get rid of the case. any ideas?
(i need to check the usb port on my hermes because its damaged i think, i cant sync or use the USB anymore.)
arty said:
what do i have to do to get to the PCB of my Hermes? i only see 3 screws. and by removing them i still cant get rid of the case. any ideas?
(i need to check the usb port on my hermes because its damaged i think, i cant sync or use the USB anymore.)
Click to expand...
Click to collapse
go to here
http://inuchanbt.blog54.fc2.com/blog-entry-100.html
the text is in english
edward