hello, does any body know if there is a way of telling what type of lcd screen the xda2 and xda2i have without opening the phone? i have purchased a phone with a good screen bad broken connector but the screen connector is different to the two broken xda2 xda2i that i already have. i am thinking of trying to find a xda2 with a broken screen but i need the one with the ribbon type connector not the plug in type. does any body know? or does any body have a xda2 with the ribbon type connector that has a broken screen they want to sell me? all i need is the board nothing else, someone may have one lying around as i have two boards but of the plug in type connector.
thanks very much
fatblokes.
screen
also sorry to be a pain, does anybody know if the screen i have with a ribbon connector will fit in another phone or pda?
thanks.
fatblokes
XDA II , XDA IIi screens
Hi the XDA II uses a Sony LCD Module P/N ACX502AKN-7. this is hard to find right now. I do not know of any availible
The XDA IIi and MDA IIi use a TD part. I have these in stock.
BTW: watch out for Chinese resellers from SHENZHEN China via hotmail accounts. They mostly scams, require payment to a Hong Kong personal accounts, and there is no recourse, warrantee, or reputation.
Related
I have an O2 XDAII that I'm using in the US with T-Mobile... and now the sync/power port at the bottom is hosed... it won't connect to either power or for data sync unless you hold the cable at a specific angle. This is not a problem with the connector since I have 1 cradle and 2 difference sync cables and its broke with all.
This sucks
I bought the XDAII off Ebay from another user less than a year ago (I don't know when the original purchase from O2 was)... can anyone tell me if there is a warranty, is it transferable and where/who I call to see if I can get this fixed.
Otherwise, anyone have any clues about how to fix it myself and/or where to get parts.
Hi, does anyone know where i can get hold of a LCM cable for my HTC MDA pro, its damaged and needit replaced ASAP.
Attached are pictures of the part that i damaged.
cheers
Looks like the LCD cable.
You can try to find one on eBay. For instance I searched for "HTC Universal LCD cable" and got:
http://search.ebay.com/search/searc...ftrt=1&ftrv=1&saprclo=&saprchi=&fsop=1&fsoo=1
or a direct link to one of them:
http://cgi.ebay.com/OEM-HTC-Univers...35969358QQihZ016QQcategoryZ3311QQcmdZViewItem
hi. is there someon in germany, austria or italy who is able to repair my
polaris?? the mini-usb connector is broken, I can not charge the battery or
get any connection.
I have found only one address who offer to repair the usb connector, but I do not want to send my polaris to USA to get the service.
please help if you have some tips or ideas.
thx
Sorry I can't help you, just wanted to say a had the same problem twice - fortunately my provider replaced the hardware without problems.
Good luck anyway!
Broken Mini USB
I just had this same problem with my Cruise. It is only 4 months old and I sent to HTC for warranty and they wanted to charge 400 to replace the motherboard and usb plug. They claimed it was abused. They need their heads examined.
HTC has bad customer service and warranty.
Hi Brunner, you might want to try http://www.mobilephonerepairs.co.uk/home.asp . They are based in London, UK and sending to/from Germany was no problem for me. Just mail to [email protected], explain your issue and ask for a repair price quote.
So far I have only bought a replacement LCD from them and not used their repair service - but will do so next week. Anyway, they were friendly and supportive, and the LCD arrived in good condition and well packaged. Overall a very good impression.
i have some expirience with HTC repair, and can say that the most problems in HTC are in main board - very unstable connections with chips and pcb.
try to tense unit left and right side while usb is connected.
one more - switch off unit (take off battery and pull in) and connect adapter - i am sure in this mode charging will go - this is separate chip doing this automaticly ,but when processor running can sw it off. Stay 1-2 hours and battery will go full.
thank you for your replies... I'll try to contatct the london adress (big thank to doctah).
to romensat: thank also for your , but it is so, that I am not able to connect the usb cable at all, because the little plastic peace into the connector is broken out an some pins are damaged.
regards
brunner
just curious: how did this end up?
Hi all,
my Athena fell down while charging (kiddies.....) - now it seems to me that the connector is broken somehow. I can't chrage the device anymore and don't get contact to my PC anymore.
Warranty exchange isn't possible due to customized ROM. What can I do ?
Dieter
PPC Techs repaired my HTC Universal when the USB connector broke, give them a try:
http://www.ppctechs.com/HTC-Advantage_895/repairs.htm
Thanks galt,
but seems to me a little bit far away.....
Would prefere a source to buy spares and do it by myself or have a repair service in Germany or even Europe...
Dieter
Sorry, I forgot to check your location... HTC might have a repair center in Europe...
dieterpapa said:
Thanks galt,
but seems to me a little bit far away.....
Would prefere a source to buy spares and do it by myself or have a repair service in Germany or even Europe...
Dieter
Click to expand...
Click to collapse
i don't know how it works with "The Phone warehouse" but here in the uk their parent company Carphone Warehouse have usually a flat fee for repairs, maybe ask The Phone Warehouse what they might charge ?
I think you can open and try to solder usb pin on your own.
its should not be that difficult task.
I have done this with my Motoming
Hello,
have already opened the device. Sadly it's not only a standard USB connector but a special HTC connector with about 10 connections...it's nearly impossible to re-solder
Dieter
But I'll ask phone warehouse in UK.
dieterpapa said:
Hello,
have already opened the device. Sadly it's not only a standard USB connector but a special HTC connector with about 10 connections...it's nearly impossible to re-solder
Dieter
But I'll ask phone warehouse in UK.
Click to expand...
Click to collapse
do it if you can as if you solder wrong pins than there would be a problem
and word impossible itself says i m possibles
Bad luck
dieterpapa said:
Hi all,
my Athena fell down while charging (kiddies.....) - now it seems to me that the connector is broken somehow. I can't chrage the device anymore and don't get contact to my PC anymore.
Warranty exchange isn't possible due to customized ROM. What can I do ?
Dieter
Click to expand...
Click to collapse
As a temp setup, why not get a docking base. they normally have a battery charging on them too. Keep you going until you find a repairer. they come up on ebay
Jay
.......Or THIS even?
I just bought this by mistake and have upgraded to a new phone already.
I'm selling it $55AUD if anyone would like to buy it
This is used to fix the notorious white screen problem on the HERMES
Hello dvd107,
have you still the cable available ?
If yes which colour is it ? Price ?
Contact me on privat mail.
Thanks