Dear All
Any help is appreciated. !
I installed lastest AKUU bootloader update while the lastes Rom Update existing at My Jasjar..
Than there were some software problems thats why dediced to make Hard Reset and Fully new Roms to my device...
And night mare started...
While at Connection to Active Sync I wanted to install latest update.. Suddenly It said there is no connection ... Connect your device and try to ... etc..
I restarted computer, tried again .. Now there is no Active Sync connection .. It says no usb coonection or mulfunction etc..
Removed battery ... SIM , SD and wait 1 hour.. than tried...
Nothing.. Than i tried without Ecvtive Connection Hard Reset..
It worked ...But disappointed again ... It sadi hard reset will start ... push 0 .. I did ... screen became Black and.. nothing happened...
Now for last 24 hours I m trying but no hard or soft reset or Power button .. nothing is working..
I charged battery all night tried again .. Nothin..
Searched iMate Site Forum ...
Saw some more people has the same problem ...
And technicians answer are not solving anything...
please help !!!
Hi,
Please try to reinstall teh new ROM again. Ignore the computer message "device not reconized" and the active sync symbol in grey!
trying...
But update programme gives COINNECTION error...
What to do !!!
Related
hi i tryie to upgrade my t-mobile pro but when strating the upgrade the active sync connection was lost because windows started to install drivers for a new device and it took tooo long and the upgrade stoped and noow my device is dead. a hard reset it and it showed me press 0 to restore but nothing happened . the screen shows usb v1.01 all the time the usb is connected and thats all . please help how can i restore my phone and is it possible. please help
You're stuck in bootloader. Been there a few times myself.
This post will help you out of your problem. It's worked for me every time
Regards,
Psi
thanks it worked for me too thanks again
Dear friends :
today i see that my unit is crashed and it didn't work , just an still today screen with no response to anything.
I did a soft reset ,but after a soft reset , it just the first time , a crashed today screen .
Then I did a hard reset and on first boot screen with HTC logo appear " No GSM " and when my unit boot , no GSM services is available.
then I go to a ROM upgrade with original ROM and the same rom that installed on my device , but at 12% of process a " Communication Error " has been shown on the PC .
I try to recover the error , but one more time the update process stoped at 12% and now when I Turn my unit on , just a three color screen and nothing else .
please help me that what can I have to do for this problem .
thank you .
Anybody can Help me ?
Are you trying to update on a PC running Vista?
Have you tried AP3?
No I do an Upgrade with windows XP SP2
I didn't try AP3 , because I can't do a Hard SPL ! my unit didn't unlock with HARD SPL softwares .
Many thanks for your answers
Did you try the s/ware form here http://forum.xda-developers.com/showthread.php?t=316846 ?
dear Confucious
Yes I test this software , but it didn't unlock my phone , now my unit didn't have IMEI ! code on device information .
Hello,
I have a problem right now ,I have a HTC p3450 .. I've updated the Rom !
Now the device does not work at all ( Power + Soft reset + Bootloader ) does not work and also i can not charge the battery and Activesync synchronization with your pc.
I wish the assistance of all
Best regards,
Eslam
plz help me quickly !
Which was that ROM you tried updating?, at the end of updating did it display that it was installed properly into your device?. Have you properly tried going through the Tri-colour screen?
i have the same problem.
i dis the ELF_USPL after finished i turned off my pfhone and now when i try to turn it on my the light of my screen turns on and the it goes off active sync can`t connect anymore to my phone can somebody help me please?
ivanmatz said:
Which was that ROM you tried updating?, at the end of updating did it display that it was installed properly into your device?. Have you properly tried going through the Tri-colour screen?
Click to expand...
Click to collapse
Rom : HardSpl_WM6
Yes bootloader ( colour screen ) appeared from the beginning and the update was successful, but now the device does not work at all.
Thanks,
vraj
I have a problem right now ,I have a HTC p3450 .. I've updated the Rom !
Now the device does not work at all ( Power + Soft reset + Bootloader ) does not work and also i can not charge the battery and Activesync synchronization with your pc.
Yeaa!!! Meee Toooo
Im Having the same problem, please sombody help us!!!!
I don't think you guys have CID unlocked you'r device.?
Hi ,
I was flashing my jasjam using sspl-herm and a 6.1 rom ,
While upgrading the progress bar reached the end but it stayed saying upgrade in progress , it took too longer than normal and i knew it wouldnt continue so i soft resetted the phone ,
now it's stuck in the splash screen before even the windows loading.
Plz plz plz help....
if you can access bootloader
a) if you dont have hardspl installed already, install it or you're going to be screwed soon.
if you can access bootloader, pop the nbf file onto your microsd <2gb as HERMIMG.NBH insert it into the phone and follow onscreen instructions.
flashing via SD is always a safer bet anyway.
Hey ,
Thnx guys 4 help
1st I tried hard resetting and it didnt work
2nd I DONT have hard spl
3rd I get into bootloader , i plug the usb cable but i cant flash , the ruuwrapper program says error during upgrade , i think it cant access the phone first coz the mobile device icon in my computer is emtpy , second activesync says not connected(although it tries to) and device manager reads an " htc usb sync " drive but no letter or something
Still no luck , any help ??
I think I've got same problem..
It can't run again after splash screen..
well my phone after i flashed and installed wm 6.5 it was working totally fine, but this morning i turned it off and then on and it totally freezes at the startup screen and never loads windows. what i can do?
i'll appreciate any comments
i have then same problem switches on displays, disigned for windows mobile 6.5.5 then freezes
Yeah many ppl has this issue... be sure to flash first the att stripped att stock rom then hard reset then boots then reflash the custom rom then hardreset then try again to use th rom maybe it works ok now
I have the same problem
but I have the same problem. I bought a second hand phone and also freezes on the welcome screen and to make the rom? I need it so I can re-flash the windows
I have problem with my tytn, i was traying 7-8 rom of win mobile 6.1 or 6.5 but no help, my htrc cant find nework or when he find network he was online 1 hour and after hat he he offline in phpne mode, what is a problem, radio, rom or... ????
miljan017 said:
I have problem with my tytn, i was traying 7-8 rom of win mobile 6.1 or 6.5 but no help, my htrc cant find nework or when he find network he was online 1 hour and after hat he he offline in phpne mode, what is a problem, radio, rom or... ????
Click to expand...
Click to collapse
try to upgrade radio version on your device !! you can find Radio Rom Wizard in http://forum.xda-developers.com/showthread.php?t=300713 or at http://forum.xda-developers.com/showthread.php?t=268031
i cant start update proces always error 260 or 262
Jasjam Freez on i-mate logo
Dear Friends
my jasjam stop on first screen(i-mate Logo) . I did soft and hard reset again and again but nothing!i remove battery and sim card along the night but nothing again.pls help me what's problem
Thnkas and goodluck
Batman1351 said:
Dear Friends
my jasjam stop on first screen(i-mate Logo) . I did soft and hard reset again and again but nothing!i remove battery and sim card along the night but nothing again.pls help me what's problem
Thnkas and goodluck
Click to expand...
Click to collapse
probably you need reflash again your device with Original Shipped ROM
JasJam Freez on Logo
Dear Rahman
sorry for my bad english.Thank u for ur reply.jasjam freez on the first page!it mean i can not connect it to PC via active sync because it no load to windows!PC can not detect device!so how can i fix this problem without a PC connection ?