Database Users

finally audio out from ms stack

hi, finally there is software to enable the audio out from ms stack to bluetooth headset. but i tried on xdaii wm5 still cannot. can anybody especially buzz fix this? Get the software from below link.
http://www.beyondthetech.com/blogs/kjam/

audio out to headset
BTAudio Utilities
These utilities will allow you to turn on/off the redirection of all system audio audio to your Bluetooth Headset.
This requires NO other hacks or modifications to your i730.
The attached ZIP file contains 3 files:
BTAudioOn.exe
BTAudioOff.exe
BTAudioToggle.exe
DONATIONS
If you find these programs useful and would like to send me money, you can donate via PayPal here.
INSTRUCTIONS:
Unzip and place these files on your i730.
- To redirect all sound to your BT headset, run BTAudioOn.exe
- To stop redirecting sound, run BTAudioOff.exe.
- To toggle the redirection on and off, run BTAudioToggle.exe.
- The effects are immediate and the program will not display anything unless there is an error.
NOTES:
BTAudioToggle.exe does not authoritatively know what the current state of audio redirection is, it simply turns the redirection on or off, alternating each time it is run. It uses a temp file, \BTAudio.tmp, to track whether it should next turn on or off. Thanks to johntchow for the icon.
The /v command-line argument will display a sucess message. Failure messages are always shown. Also, if you know how to set up a shortcut, you technically don't need both .exe's. You can run BTAudioOn.exe with the /off argument and it will do the same thing as BTAudioOff. But since each file is less than 4k, which I think is the block size for the RAM file system, it would not actually save any space so what's the point.
This was made possible mostly due to the information at http://blogs.msdn.com/cenet/archive.../12/451012.aspx
Note; Buzz or any expert out there.Please make this utility work with xdaii wm2005c. Please.....Buzz?

:lol:
It works great on my K-Jam. Too bad it is only mono. But still better than nothing!
Wouter

ya. u r luckey fren. working on your k-jam, right?. but why it didnt work on xda11wm2005c with hs820? the mic got responses from the utility but the sound still havent transfer to the bluetooth headset. Ooooo....someone who know software, please help to make this utility work. Moat of the people without widcom installed already started to enjoy all audio transfer to their headset except xda11. Buzz, are u there?

this is the original thread from pdaphonehome.com http://pdaphonehome.com/forums/showthread.php?s=&threadid=54951

When i try to turn the audio on it writtes "Failed to enable BT audio".
What have o done worng. I have put the files in Application Data. It is a Qtek 9100

Did you first turn on your bluetooth?
Sometimes this happens to me too but I now only use the BTaudioToggle tool. I made a shortcut on the todayscreen and it works great!
Wouter

Will this transfer the mic too? I would like to use it for my voip program.
John
www.skynetworks.gotdns.com

I can still use my headset for phonecalls but I don't know if it will work with a computer and VOIP. Haven't tried that one yet!
Wouter

Doesn't work on i-mate jam though
Hey, guys. Found out this great featured hack and still haven't been able to toggle ALL audio out of bluetooth headset on my i-mate jam. Doesn't work! I can only redirect audio from GSM source to headset and back, but can't redirect music from audio players.... seems to be the problem of JAM bt stack...
Who has the same problem please respond

audio out to headset
Hey,
I've tryed the BTAudiotoggle.exe on my Xda Exec what happens is this:
It launches the voice command if I tap the screen the sound goes through the bluetooth headset but the it return back to the PDA.
Is the anyway that I can get the Audio going through the headset for as long that I need it then when I do not need it I can switch it manually back to the PDA.
Please can someone help me because I would like to try the Tom Tom Navigator 5 and see if I can get the sound through the bluetooth car kit which is a Parrot 3300.
Thank you.
Gigino

Hey,
I've tryed the BTAudiotoggle.exe on my Xda Exec what happens is this:
It launches the voice command if I tap the screen the sound goes through the bluetooth headset but the it return back to the PDA.
Is the anyway that I can get the Audio going through the headset for as long that I need it then when I do not need it I can switch it manually back to the PDA.
Please can someone help me because I would like to try the Tom Tom Navigator 5 and see if I can get the sound through the bluetooth car kit which is a Parrot 3300.
Thank you.
Gigino
Click to expand...
Click to collapse
Gigino - this is EXACTLY what I am trying to do also (i have the Exec and Parrot 3300). Did you manage to get it to work?

hi guys
don't suppose anyone has tested this stack on the IMATE JASJAR ?
Cheers

ANy one tried this on an MDA compact UK, or MDA PRO UK
I sure hope T-mobile relase a new ROM with A2DP , streaming support now MS have officially improved their own stack.
http://www.theunwired.net/?itemid=2762

tgmweb said:
Hey,
I've tryed the BTAudiotoggle.exe on my Xda Exec what happens is this:
It launches the voice command if I tap the screen the sound goes through the bluetooth headset but the it return back to the PDA.
Is the anyway that I can get the Audio going through the headset for as long that I need it then when I do not need it I can switch it manually back to the PDA.
Please can someone help me because I would like to try the Tom Tom Navigator 5 and see if I can get the sound through the bluetooth car kit which is a Parrot 3300.
Thank you.
Gigino
Click to expand...
Click to collapse
Gigino - this is EXACTLY what I am trying to do also (i have the Exec and Parrot 3300). Did you manage to get it to work?
Click to expand...
Click to collapse
I've managed to do it by using the information that can be found at http://forum.xda-developers.com/viewtopic.php?t=33756. If you set the registry value then the files work a treat (but are a bit redundant because you can switch the audio to/from headset using the button on it).
Cheers,
Steve.

have you guys tried VJVolubilis? It should work in the same manner.
V

Hi Guys!
Uuupppsss ....
unfortunately the download of the ZIP file is still not working. could anyone of the honourable sirs share it with me?
Thanks in advance.

o2 mini new bluetooth stack (AKA bluetooth stock).

hi guys, i know all of you want more bt stack rather than ms bt stack. now i found new bluetooth stock for dopod 818(o2 mini).
this is support your o2 mini support stereo bluetooth headset, but make should your bt headset supports. and there is also file transfer stock......and other thing, but stereo bluetooth function need to be improving.
attention: backup you system first.
i learn a lot in this forum, so i want to share this stock for all of you. this stock is i find from somewhere, so i can not fix any bug. anyway just enjoy....

First post and delivering such a revolution? Makes me nervous...

Chatty said:
First post and delivering such a revolution? Makes me nervous...
Click to expand...
Click to collapse
HAHA, I KNOW. BUT YOU CAN TRY, PLEASE FIND ATTACHED PHOTO. THIS DRIVER COME FROM ONE BLUETOOTH HANDSET.

Could this be? Can anyone verify?

Handsfree versus headset
Hi,
I tried and first thing, everything work now as fine as before so a first good point.
Second one problem : my Bluespoon AX is only recognize as a Hands-free and you can only set "Audio redirection" for Headset.
Perhaps some registry work ?
I will continue to investigate

very nice patch indeed..
installed it on my JAM... an it runs OK...
some extinsive testing is required however... I'll let you know later
Thank you kevinyang6688
If this works, you'll be the best

Works here aswell!
it even seems to support bluetooth printing???

---

just downloaded.. will give it a try.
thanks.

Re: O2 MINI NEW BLUETOOTH STOCK.
kevinyang6688, could u pls send me the program for testing only, i am using o2 mini w/ jabra bt330 headset, [email protected]
kevinyang6688 said:
NOW I FOUND NEW BLUETOOTH STOCK FOR DOPOD 818(O2 MINI). ENJOY.
THIS IS SUPPORT YOUR O2 MINI SUPPORT STEREO BLUETOOTH HEADSET
ATTENTION: BACKUP YOU SYSTEM FIRST.
Click to expand...
Click to collapse

Re: O2 MINI NEW BLUETOOTH STOCK.
vicqoo said:
kevinyang6688, could u pls send me the program for testing only, i am using o2 mini w/ jabra bt330 headset, [email protected]
kevinyang6688 said:
NOW I FOUND NEW BLUETOOTH STOCK FOR DOPOD 818(O2 MINI). ENJOY.
THIS IS SUPPORT YOUR O2 MINI SUPPORT STEREO BLUETOOTH HEADSET
ATTENTION: BACKUP YOU SYSTEM FIRST.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
When you're logged on, you can download the file in the first post.

INstalled it but I have no clue how to make it work. Been to the BT settings and everything is there but I have no clue to as it does not detect my my Jabra BT250V.
Will this work in actually turning my Jabra into an audio headset or is it only as phone headset?

Does this help at all with the Nokia car kit echo issue?
Cheers

i'm using O2 mini. After installed... Nothing shown in the "Default headset" drop-down-list-box of the Audio tab
Anyone having similar issue?

To Leewenam
Same thing for me but my Bluespon ax is only detected as a handsfree

Re: To Leewenam
eurorpeen said:
Same thing for me but my Bluespon ax is only detected as a handsfree
Click to expand...
Click to collapse
I guess this audio streaming thing only work for stereo BT? can anyone confirm this?

leeweenam said:
i'm using O2 mini. After installed... Nothing shown in the "Default headset" drop-down-list-box of the Audio tab
Anyone having similar issue?
Click to expand...
Click to collapse
maybe delete the device and bond it again???

Re: O2 MINI NEW BLUETOOTH STOCK.
kevinyang6688 said:
NOW I FOUND NEW BLUETOOTH STOCK FOR DOPOD 818(O2 MINI). ENJOY.
THIS IS SUPPORT YOUR O2 MINI SUPPORT STEREO BLUETOOTH HEADSET
ATTENTION: BACKUP YOU SYSTEM FIRST.
Click to expand...
Click to collapse
Man, you seriously kick a$$! This cab adds A2DP, FTP (successfully sent a series of 3 files to my Magician :shock: :wink: ), Audio Gateway (was able to use my laptop as a BT handsfree ), BT Printing Profile... AWESOME!!! Takes MS BT stack to a whole new level :shock:

But you could already send files with activesync over bluetooth without this stack (do i suppose ftp service is the same thing). Btw can you acces the files located on your computer from your mini now??? (if yes plz tell me how)
As far as I am concerned, it works but doesn t change anything with my bluetooth headset and voice command, i always don t hear any voice command sound in my bt headset, but then I hear the phone conversation directly in the headset...so nothing has changed.
Would have loved so much to hear and launch voice commands directly from the headset's mic.
But thx anyway! that s a really good thing for us anyway =)

It does work with I-tech S35 Stereo BT Headset
As per subject really...
Just tested this on my 1.12.00 T-Mobile Rom and indeed all audio is indeed being re-directed to my headset. Only 'drawback' is that I can't get it to work with PocketMind Pocket Music- the sound it just muted.
But it works perfectly well with Windows Media Player. Slight hitch with WMP is that I am unable to change the volume on the software or indeed the JAM system volume directly- a minor fault for me since I have a volume control my headset Also the music seems to cut out for a second or so every 7-8 seconds.
Music pauses and restarts when an incoming phone call is received.
A massive thanks goes out kevinyang6688. Cheers mate, I have been wanting this for ages! Thanks again!

Play music through bluetooth headset?

Is it possible to play music through a bluetooth headset? Not a stereo headset, just a normal, mono headset.
If so, does it automatically pause the music when you get a call?

yes you can using the bt audio software on http://www.htcwizardweb.net/system/files?file=btaudio.zip
download it unzip it and copy the folder to your storage card or your pda and enable or disable it at your convinience. hope i was helpfull

I tried that BT Audio app with the 750, and it doesn't work. I also tried every media player I could find...still nothing.
Has anyone had success with this theory working? I need it in a BAD way.

Here is a .cab file that does what you want it to do.
First activate your Bluetooth unit. Then stream your music or whatever. Then turn on the software. It works quite well.
Enjoy !!!

What I do for my 8125 is activate the BT toggling program and then Mortplayer. I tie the two programs together using MortScript and then activate a playlist through voice command by creating a shortcut into the Programs file.

usng bt headset with htc wizard with fafio crossbow
yes it is capable to do this i have wizard htc running clocking at 286 speed, tomtom mobile 5, with the jabra 2020 bluetooth earpiece all works great gps every single thing to do with sound comes through ear piece even key tapping try this program called btnav you can download it then allocate one of the the buttons to activate it as i do. my normal day using gps system intails switching on earpiece then wizard, pushing allocated button my earpiece beeps then start tomtom all works great then when at work i can listen to audio tracks aswell great little toy hope this helps

zcink said:
Here is a .cab file that does what you want it to do.
First activate your Bluetooth unit. Then stream your music or whatever. Then turn on the software. It works quite well.
Enjoy !!!
Click to expand...
Click to collapse
BEAUTIFUL THING

Bluetooth Audio
I've downloaded the bluetooth audio to my Samsung Blackjack II and installed it. I have tried several combinations of steps to get the music to play through my headset but I cant get it to work. Do you have any suggestions for me? Is there a specific bluetooth headset I need to get? Or did I just mess something up?

Hey thanks alot for this cab because I've been looking for this cab all over and finally you had the solution to my problem.....

I just installed that cab file and while it seems to function correctly by sending music to the earpiece on the phone, it does not send it to the BT device. The BT device acknowledges when the program is turned on and when it is turned off, but no sound is coming out.
I'm using a Blackjack2 and an Isymphony BT headset/speaker which is not stereo.
I just want to be able to hear my phone on my BT headset/speaker.
Is there some setting I'm missing? Does this program not work? Why for some and not others? Where can I find documentation? Who made that program?

Well, I dont know why you blackjack people are here(this being the Wizard forum and all!), but what I used to use on my Excalibur is the little shareware program called:BTAUDIO(link at bottom of post)
Its shareware in the fact that it only works for 30 minutes at a time, but it does indeed send ALL audio that the phone emits to your bluetooth headset.
Instructions:
1-Install BTAUDIO .cab to your phone
2-Activate your bluetooth headset, and put it in "find" mode
3-Goto your phones comm manager and turn Blueooth on
4-Now pair your headset with your phone
5-Start BTAUDIO
6-Follow the instructions on the screen and BAM, you are done!
I hope that helps!
DOWNLOAD LINK FOR BTAUDIO=
http://www.megaupload.com/?d=9MLLW0MC

Thanks for the reply.
I gave this program a try and it didn't seem to work either. I'm guessing it's a BlackJack problem. That download appeared to be pretty much the same thing as the other link to the "BTaudio" program by Triangle but is limited to 30 minutes, like you said. The first link was not limited to 30 minutes. (so you might want to check that one out)
As for why the Blackjack guys are coming here I'm guessing it's the same reason I found this place. A Google search.
The Blackjack forums don't seem to have any solution other than... "go spend another $75 on a new set of headphones"
Myself, I want to use a BT mono speaker for listening to mono recordings and don't really want a stereo headset.
Thanks for all your help!

THANX for the CAB file
REaly thank you for the cab file works gr8.......................................

Thanks...
This one is very nice. I can't speak for others, but here is what I've learned in a short time....
My personalized ring tones are now coming through the BT, along with the called annoucement. Sorta disorienting, but I like it. I bet if I disable call annoucements, this will fix it. I'll look around..... Thanks for this tweak....
I love it!

thanks
hi this is the first time i am using this site hope it works

I just intalled this cab on a Samsung Ace i325 6.1 (Sprint). I'm using the Jawbone II bluetooth and it works perfectly! Thanks for the cab file.

Hi ,
i really appreciate you cooperation about this issue
i have the same problem but with java platform phone SE w550i) with bluetooth headset
i need a java application that let me hear the music via bluetooth headset (application like msi blue player) in jar format
Can any one help (regarding that my bluetooth headset support a2dp and w550i has no problem with that just need application to stream audio through bluetooth headset)
thanks in advance
my mail is [email protected]

THANX for the CAB file

zcink said:
Here is a .cab file that does what you want it to do.
First activate your Bluetooth unit. Then stream your music or whatever. Then turn on the software. It works quite well.
Enjoy !!!
Click to expand...
Click to collapse
thank you bro you solved my problem

This application works awesome... Great work
One issue occurred.... The BT Audio is switched ON, i receive a call, i answer/end it. After the call ends, the music is routed back to the phones speaker. I have to switch ON BT Audio again.
Keep up the good work

All sounds to BT ???

Hi all !
Is it possible to send all sounds to the BT headset ? Not to the stereo BT headset, but to the normal one. It was easily possible with my old Universal.
Can anybody help ?
Thanx in advance,
Best regards.

BT Audio
I use a small program on my 8125 that sends ALL sounds to my h700. I can watch movies and listen to my mp3s wtihout having to plug in a corded ear piece.
Please see attched. It claims to work on most BT situations. Just unzip and copy the cab to your device. Run the cab from a file manager in your device and woila. It should appear in your programs.

whiting said:
I use a small program on my 8125 that sends ALL sounds to my h700. I can watch movies and listen to my mp3s wtihout having to plug in a corded ear piece.
Please see attched. It claims to work on most BT situations. Just unzip and copy the cab to your device. Run the cab from a file manager in your device and woila. It should appear in your programs.
Click to expand...
Click to collapse
I don't think that works with TyTN ....

whiting said:
I use a small program on my 8125 that sends ALL sounds to my h700. I can watch movies and listen to my mp3s wtihout having to plug in a corded ear piece.
Please see attched. It claims to work on most BT situations. Just unzip and copy the cab to your device. Run the cab from a file manager in your device and woila. It should appear in your programs.
Click to expand...
Click to collapse
Thank you. I've installed the program, it switches on the headset (i can hear a double "beep") but all sounds are still going through the Hermes internal speakers.... Strange...

Sorry it did not work.
I had the same problem too at first because I forgot to turn on my BT headset first.
Here is the information on the software I have been talking about.
Maybe you can get in touch with the author.
I wish you luck in finding a solution.
BlueTooth Audio v1.0
Size: 226 KB
Date: September 25, 2006
Type: Freeware
Requirements:
• Windows Mobile 5.0
• .NET CF v2.0
Download:
• btaudio.cab
Author: Blade2032
Home: http://www.trianglepowers.com/ppc6700/Default.aspx
Email: [email protected]
Description:
Want to listen to your music stored on your Pocket PC, but don't want to carry around a corded headset? If you've got a BlueTooth headset, then you're in luck!
With this program, just start it up, and all of the sounds from your system will be rerouted from the internal speaker to your BlueTooth headset!
Go here to download the version which does not require the 2.0 Compact Framework. ftp://www.trianglepowers.com/btaudiocf1.cab

I wanted the exact same thing , all sound to my mono-bluetooth...since I just found bits and pieces everywhere, I decided to do my own cab file with all the settings that was required
read about it here: http://forum.xda-developers.com/showthread.php?t=278778
hopefully it will work for you too

I want to find an app that lets me use Skype and a BT headset on my TyTN

100thMonkey said:
I want to find an app that lets me use Skype and a BT headset on my TyTN
Click to expand...
Click to collapse
Did you give a try to BTAudio (see above)??

I have a Dopod838 Pro - and I am trying to get all sounds to my BT headset.
When I have skype open and I press the "connect" button on my BT headset, VoiceCommander opens and all the sounds are sent to my BT headset; but only for 1 minute (until VoiceCommander shutsdown because he didn't recognize anything).
I have tried btaudio.cab provided in this thread, but it doesn't work. I have tried VJvobullis and many other apps that didn't work.
HELP!

Awesome, this fixed it (as posted above by Cybertron (thanks so much): http://forum.xda-developers.com/showthread.php?t=278778
Find more details here:
http://forum.xda-developers.com/showthread.php?t=274693

My understanding is that BlueMusic from Teksoft routes all sounds to Bluetooth headsets. They specifically mention Skype as a compatible app. It's not free, but there is a free trial. www.teksoftco.com
SP

I've got an Orange M3100 (also called HTC Hermes I think) and trying to use it with a BlueTrek G2 (a couple of yesrs old) to listen to music but also primarily for Skype.
I have tried all options on this link
http://forum.xda-developers.com/showthread.php?t=281977
but none work. I get static in the headset when I use any of the applications mentioned on the above page but no sound is transferred from Skype (or Windows Media player).
Can anyone help
S

Menneisyys said:
Did you give a try to BTAudio (see above)??
Click to expand...
Click to collapse
yes I did and it didn't work with Skype to direct the sound through the headset. I still came through the speakerphone even if other system sounds went through the headset

stpete111 said:
My understanding is that BlueMusic from Teksoft routes all sounds to Bluetooth headsets. They specifically mention Skype as a compatible app. It's not free, but there is a free trial. www.teksoftco.com
SP
Click to expand...
Click to collapse
I tried this application on my 8525 and it did work, it took a long time to load though. One thing they do not mention is that it disables the voice dial on the BT headset. That doesn't work for me so I uninstalled it. That took even longer, about an hour of processing before it was done uninstalling itself.
There is a .cab file available elsewhere in this forum that does the same thing and someone came up with a way to toggle that on and off, sounds like a better solution than what this does.

whiting said:
I use a small program on my 8125 that sends ALL sounds to my h700. I can watch movies and listen to my mp3s wtihout having to plug in a corded ear piece.
Please see attched. It claims to work on most BT situations. Just unzip and copy the cab to your device. Run the cab from a file manager in your device and woila. It should appear in your programs.
Click to expand...
Click to collapse
Thanks so much
Aswan

whiting said:
I use a small program on my 8125 that sends ALL sounds to my h700. I can watch movies and listen to my mp3s wtihout having to plug in a corded ear piece.
Please see attched. It claims to work on most BT situations. Just unzip and copy the cab to your device. Run the cab from a file manager in your device and woila. It should appear in your programs.
Click to expand...
Click to collapse
Thanks a lot for this, I just put it on my WM6.5 TP2 and it works like a champ.

Problems with Bluetooth Stereo Earphones and A2DP

Hellow,
I bought one Sony DRBT20NX Bluetooth headphones for my X01HT (SoftBank ROM+Asukal patch for translate to English).
I paired both devices (Hands Free and Wireless Stereo services), but now I don't know what I have to do for listen music from my earphones. I switch on bluetoth on both but music is in he loudspeaker of the X0HT.
Also, I don't know how to make work AVRCP.
Thanks
Sesaru

sesaru said:
Hellow,
I bought one Sony DRBT20NX Bluetooth headphones for my X01HT (SoftBank ROM+Asukal patch for translate to English).
I paired both devices (Hands Free and Wireless Stereo services), but now I don't know what I have to do for listen music from my earphones. I switch on bluetoth on both but music is in he loudspeaker of the X0HT.
Also, I don't know how to make work AVRCP.
Thanks
Sesaru
Click to expand...
Click to collapse
You should have a 'Connect' button on your headset... check your manual. I have a diferent headset, but on mine I short-press the power button and an icon appears at the top of the screen.

This topic has been discussed quite a bit. Please use the forum's SEARCH feature. It's quite useful at times. AVRCP, for one, will not work unless you're using a media player that actually supports it, such as MortPlayer.

@sesaru
i use this headphones on X01HT too. just bought few days ago. if you want engilish manual for this pm me. push play pause in your headphones then open media player. this will open A2DP music mode (Wireless Stereo). AVRCP works with media player i dont know any other work one. imusic and gsplayer dosent work. if you push dark blue bar button you will open HFP (hands free). i have bad news too. i cant get good quality of sound. there is some noise when i listen music with it. user manual write it can be about 2.4 ghz wireless device. like microwave oven, wireless LAN and cordless telephone. all thing is what tokyo is haven of them. you must be 10m far from all of them. and this is mean i must to go 10m away tokyo to listen clear music. if you get good quality pls write me. i hope all this will help you.

Just to confirm i have these headphones and they work with all my windows mobile devices.
My hermes is WM5 but they work fine with my Universal with WM6
Someone already said it but yeah pushing the play pause button re-pairs them for a2dp. I think sometimes i push it twice to get it to do it.

Hello,
I fixed when I updated to WM6. But sounds is not good, so I installed Widcomm stack. But I have a new problem.
After install Widcomm stack (I have Windows Mobile VI - BLACK EDITION v1.2 but also happended with WM6 for Hermes LVSW Edition), I can't sync via USB. My computer don't detect the Hermes! Is if like I didn't connect to it.
Any idea?
UPDATE: Fix is here:
http://forum.xda-developers.com/showpost.php?p=1072534&postcount=59

sesaru said:
Hello,
I fixed when I updated to WM6. But sounds is not good, so I installed Widcomm stack. But I have a new problem.
After install Widcomm stack (I have Windows Mobile VI - BLACK EDITION v1.2 but also happended with WM6 for Hermes LVSW Edition), I can't sync via USB. My computer don't detect the Hermes! Is if like I didn't connect to it.
Any idea?
UPDATE: Fix is here:
http://forum.xda-developers.com/showpost.php?p=1072534&postcount=59
Click to expand...
Click to collapse
Oh!! I just realised now I can't switch on the phone module of the comm manager (>_<) So It doesn't work; I give up.
Can you post where exactly is the fix for this? I'm reading a lot, but I can't find it ...

Hello,
What I did is this:
I installed WM6 ROM in my X01HT and WC Stack. After That, I did this:
1. Close BT Manager and turn BT off.
2. Open registry (need Resco Registry plug-in) and make the following changes (no need of soft reset after them):
[HKLM\Software\Widcomm\BTConfig\Applications\0001]
Change ComPortNumber from 8 to 7
[HKLM\Software\Widcomm\BTConfig\Services\0001]
Change ComPortNumber from 9 to 6
Rename [HKLM\Drivers\BuiltIn\Serial8] to [HKLM\Drivers\BuiltIn\Serial6] and change these subkeys acordingly
"FriendlyName"="Bluetooth Serial Port COM6:"
"DeviceArrayIndex"=dword:00000006
"Index"=dword:00000006
When you have changed this, suspend (off) the PDA for a few seconds and turn it on again. Then goto Bluetooth Settings- Services-Serial Port-Advanced and verify that thet ports that Widcomm is using are 6 & 7
But now I can't switch on the phone App. When I open the Comm App, and push the "Phone" button, it didn't start.
Please, somebody let me know what I'm doing bad.
Thanks
Cesar